rendered paste bodyDumping 93 device(s) from the Global Device List:-------------------------------------------------udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list) info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string list) info.capabilities = {'cpufreq_control'} (string list) info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list) info.product = 'Computer' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list) org.freedesktop.Hal.version = '0.5.14' (string) org.freedesktop.Hal.version.major = 0 (0x0) (int) org.freedesktop.Hal.version.micro = 14 (0xe) (int) org.freedesktop.Hal.version.minor = 5 (0x5) (int) power_management.acpi.linux.version = '20091214' (string) power_management.can_hibernate = true (bool) power_management.can_suspend = false (bool) power_management.can_suspend_hybrid = false (bool) power_management.is_powersave_set = false (bool) power_management.quirk.dpms_on = true (bool) power_management.quirk.dpms_suspend = true (bool) power_management.quirk.vbe_post = true (bool) power_management.quirk.vbemode_restore = true (bool) power_management.quirk.vbestate_restore = true (bool) power_management.quirk.vga_mode_3 = true (bool) power_management.type = 'acpi' (string) system.board.product = 'Tyan Transport GT24-B3992' (string) system.board.serial = 'empty' (string) system.board.vendor = 'TYAN Computer Corporation' (string) system.board.version = 'empty' (string) system.chassis.manufacturer = 'empty' (string) system.chassis.type = 'Desktop' (string) system.firmware.release_date = '09/22/2006' (string) system.firmware.vendor = 'American Megatrends Inc.' (string) system.firmware.version = '080011' (string) system.formfactor = 'desktop' (string) system.hardware.primary_video.product = 20830 (0x515e) (int) system.hardware.primary_video.vendor = 4098 (0x1002) (int) system.hardware.product = 'empty' (string) system.hardware.serial = 'empty' (string) system.hardware.uuid = '00020003-0004-0005-0006-000700080009' (string) system.hardware.vendor = 'empty' (string) system.hardware.version = 'empty' (string) system.kernel.machine = 'x86_64' (string) system.kernel.name = 'Linux' (string) system.kernel.version = '2.6.33.5-server-2mnb' (string) system.kernel.version.major = 2 (0x2) (int) system.kernel.version.micro = 33 (0x21) (int) system.kernel.version.minor = 6 (0x6) (int)udi = '/org/freedesktop/Hal/devices/acpi_CPU0' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Dual-Core AMD Opteron(tm) Processor 2218' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string) linux.acpi_path = '/proc/acpi/processor/CPU0' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = false (bool) processor.number = 0 (0x0) (int)udi = '/org/freedesktop/Hal/devices/acpi_CPU1' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Dual-Core AMD Opteron(tm) Processor 2218' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string) linux.acpi_path = '/proc/acpi/processor/CPU1' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = false (bool) processor.number = 1 (0x1) (int)udi = '/org/freedesktop/Hal/devices/acpi_CPU2' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Dual-Core AMD Opteron(tm) Processor 2218' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU2' (string) linux.acpi_path = '/proc/acpi/processor/CPU2' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = false (bool) processor.number = 2 (0x2) (int)udi = '/org/freedesktop/Hal/devices/acpi_CPU3' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Dual-Core AMD Opteron(tm) Processor 2218' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU3' (string) linux.acpi_path = '/proc/acpi/processor/CPU3' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = false (bool) processor.number = 3 (0x3) (int)udi = '/org/freedesktop/Hal/devices/net_computer_loopback' info.capabilities = {'net', 'net.loopback'} (string list) info.category = 'net.loopback' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Loopback device Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/virtual/net/lo' (string) net.address = '00:00:00:00:00:00' (string) net.arp_proto_hw_id = 772 (0x304) (int) net.interface = 'lo' (string) net.linux.ifindex = 1 (0x1) (int) net.originating_device = '/org/freedesktop/Hal/devices/computer' (string)udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Macintosh mouse button emulation' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) input.device = '/dev/input/event0' (string) input.product = 'Macintosh mouse button emulation' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string)udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button', 'input.keys'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string) input.device = '/dev/input/event2' (string) input.product = 'Power Button' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'evdev' (string) input.xkb.rules = 'base' (string) input.xkb.variant = '' (string) linux.device_file = '/dev/input/event2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2' (string)udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' button.has_state = false (bool) button.type = 'sleep' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button', 'input.keys'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Sleep Button' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.device = '/dev/input/event4' (string) input.product = 'Sleep Button' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'evdev' (string) input.xkb.rules = 'base' (string) input.xkb.variant = '' (string) linux.device_file = '/dev/input/event4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input4/event4' (string)udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button', 'input.keys'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string) input.device = '/dev/input/event3' (string) input.product = 'Power Button' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'evdev' (string) input.xkb.rules = 'base' (string) input.xkb.variant = '' (string) linux.device_file = '/dev/input/event3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0c' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' info.linux.driver = 'i8042 kbd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:09' (string) pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) pnp.id = 'PNP0303' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:08' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:07' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' info.linux.driver = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '16550A-compatible COM port' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06' (string) pnp.description = '16550A-compatible COM port' (string) pnp.id = 'PNP0501' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1' info.capabilities = {'serial'} (string list) info.category = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string) info.product = '16550A-compatible COM port' (string) info.subsystem = 'tty' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1' (string) linux.device_file = '/dev/ttyS1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'tty' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06/tty/ttyS1' (string) serial.device = '/dev/ttyS1' (string) serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string) serial.port = 1 (0x1) (int) serial.type = 'platform' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0501' info.linux.driver = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '16550A-compatible COM port' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:05' (string) pnp.description = '16550A-compatible COM port' (string) pnp.id = 'PNP0501' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0' info.capabilities = {'serial'} (string list) info.category = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) info.product = '16550A-compatible COM port' (string) info.subsystem = 'tty' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0' (string) linux.device_file = '/dev/ttyS0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'tty' (string) linux.sysfs_path = '/sys/devices/pnp0/00:05/tty/ttyS0' (string) serial.device = '/dev/ttyS0' (string) serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) serial.port = 0 (0x0) (int) serial.type = 'platform' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Math Coprocessor' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:04' (string) pnp.description = 'Math Coprocessor' (string) pnp.id = 'PNP0c04' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT-style speaker sound' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:03' (string) pnp.description = 'AT-style speaker sound' (string) pnp.id = 'PNP0800' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' info.linux.driver = 'rtc_cmos' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT Real-Time Clock' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:02' (string) pnp.description = 'AT Real-Time Clock' (string) pnp.id = 'PNP0b00' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT DMA Controller' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:01' (string) pnp.description = 'AT DMA Controller' (string) pnp.id = 'PNP0200' (string)udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PCI Bus' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:00' (string) pnp.description = 'PCI Bus' (string) pnp.id = 'PNP0a03' (string)udi = '/org/freedesktop/Hal/devices/platform_vesafb_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (vesafb.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/vesafb.0' (string) platform.id = 'vesafb.0' (string)udi = '/org/freedesktop/Hal/devices/platform_serial8250' info.linux.driver = 'serial8250' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (serial8250)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/serial8250' (string) platform.id = 'serial8250' (string)udi = '/org/freedesktop/Hal/devices/platform_pcspkr' info.linux.driver = 'pcspkr' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (pcspkr)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr' (string) platform.id = 'pcspkr' (string)udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' info.capabilities = {'input'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) info.product = 'PC Speaker' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' (string) input.device = '/dev/input/event5' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) input.product = 'PC Speaker' (string) linux.device_file = '/dev/input/event5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input5/event5' (string)udi = '/org/freedesktop/Hal/devices/platform_i8042' info.linux.driver = 'i8042' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (i8042)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/i8042' (string) platform.id = 'i8042' (string)udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' info.linux.driver = 'atkbd' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 KBD port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string) serio.description = 'i8042 KBD port' (string) serio.id = 'serio0' (string)udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) info.product = 'AT Translated Set 2 keyboard' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string) input.device = '/dev/input/event1' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.product = 'AT Translated Set 2 keyboard' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'evdev' (string) input.xkb.rules = 'base' (string) input.xkb.variant = '' (string) linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input1/event1' (string)udi = '/org/freedesktop/Hal/devices/pci_1022_1103_0' info.linux.driver = 'k8temp' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'K8 [Athlon64/Opteron] Miscellaneous Control' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1103_0' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.3' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.3' (string) pci.product = 'K8 [Athlon64/Opteron] Miscellaneous Control' (string) pci.product_id = 4355 (0x1103) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int)udi = '/org/freedesktop/Hal/devices/pci_1022_1102_0' info.linux.driver = 'amd64_edac' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'K8 [Athlon64/Opteron] DRAM Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1102_0' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.2' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.2' (string) pci.product = 'K8 [Athlon64/Opteron] DRAM Controller' (string) pci.product_id = 4354 (0x1102) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int)udi = '/org/freedesktop/Hal/devices/pci_1022_1101_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'K8 [Athlon64/Opteron] Address Map' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1101_0' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.1' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.1' (string) pci.product = 'K8 [Athlon64/Opteron] Address Map' (string) pci.product_id = 4353 (0x1101) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int)udi = '/org/freedesktop/Hal/devices/pci_1022_1100_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1100_0' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:19.0' (string) pci.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration' (string) pci.product_id = 4352 (0x1100) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int)udi = '/org/freedesktop/Hal/devices/pci_1022_1103' info.linux.driver = 'k8temp' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'K8 [Athlon64/Opteron] Miscellaneous Control' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1103' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' (string) pci.product = 'K8 [Athlon64/Opteron] Miscellaneous Control' (string) pci.product_id = 4355 (0x1103) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int)udi = '/org/freedesktop/Hal/devices/pci_1022_1102' info.linux.driver = 'amd64_edac' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'K8 [Athlon64/Opteron] DRAM Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1102' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' (string) pci.product = 'K8 [Athlon64/Opteron] DRAM Controller' (string) pci.product_id = 4354 (0x1102) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int)udi = '/org/freedesktop/Hal/devices/pci_1022_1101' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'K8 [Athlon64/Opteron] Address Map' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1101' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' (string) pci.product = 'K8 [Athlon64/Opteron] Address Map' (string) pci.product_id = 4353 (0x1101) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int)udi = '/org/freedesktop/Hal/devices/pci_1022_1100' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1100' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' (string) pci.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration' (string) pci.product_id = 4352 (0x1100) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int)udi = '/org/freedesktop/Hal/devices/pci_1002_515e' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ES1000' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1002_515e' (string) info.vendor = 'ATI Technologies Inc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0' (string) pci.product = 'ES1000' (string) pci.product_id = 20830 (0x515e) (int) pci.subsys_product_id = 20830 (0x515e) (int) pci.subsys_vendor = 'ATI Technologies Inc' (string) pci.subsys_vendor_id = 4098 (0x1002) (int) pci.vendor = 'ATI Technologies Inc' (string) pci.vendor_id = 4098 (0x1002) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_132_2' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'BCM5780 [HT2000] PCI-Express Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_132_2' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0' (string) pci.product = 'BCM5780 [HT2000] PCI-Express Bridge' (string) pci.product_id = 306 (0x132) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_132_1' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'BCM5780 [HT2000] PCI-Express Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_132_1' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0' (string) pci.product = 'BCM5780 [HT2000] PCI-Express Bridge' (string) pci.product_id = 306 (0x132) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_132_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'BCM5780 [HT2000] PCI-Express Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_132_0' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0' (string) pci.product = 'BCM5780 [HT2000] PCI-Express Bridge' (string) pci.product_id = 306 (0x132) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_132' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'BCM5780 [HT2000] PCI-Express Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_132' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0' (string) pci.product = 'BCM5780 [HT2000] PCI-Express Bridge' (string) pci.product_id = 306 (0x132) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_130_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'BCM5780 [HT2000] PCI-X bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_130_0' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0' (string) pci.product = 'BCM5780 [HT2000] PCI-X bridge' (string) pci.product_id = 304 (0x130) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/pci_14e4_166a_0' info.linux.driver = 'tg3' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_130_0' (string) info.product = 'NetXtreme BCM5780 Gigabit Ethernet' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_14e4_166a_0' (string) info.vendor = 'Broadcom Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/0000:04:04.1' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/0000:04:04.1' (string) pci.product = 'NetXtreme BCM5780 Gigabit Ethernet' (string) pci.product_id = 5738 (0x166a) (int) pci.subsys_product_id = 5738 (0x166a) (int) pci.subsys_vendor = 'Broadcom Corporation' (string) pci.subsys_vendor_id = 5348 (0x14e4) (int) pci.vendor = 'Broadcom Corporation' (string) pci.vendor_id = 5348 (0x14e4) (int)udi = '/org/freedesktop/Hal/devices/net_00_e0_81_44_d3_7b' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_14e4_166a_0' (string) info.product = 'Networking Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_e0_81_44_d3_7b' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/0000:04:04.1/net/eth1' (string) net.80203.mac_address = 964241445755 (0xe08144d37b) (uint64) net.address = '00:e0:81:44:d3:7b' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth1' (string) net.linux.ifindex = 4 (0x4) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_14e4_166a_0' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)udi = '/org/freedesktop/Hal/devices/pci_14e4_166a' info.linux.driver = 'tg3' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_130_0' (string) info.product = 'NetXtreme BCM5780 Gigabit Ethernet' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_14e4_166a' (string) info.vendor = 'Broadcom Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/0000:04:04.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/0000:04:04.0' (string) pci.product = 'NetXtreme BCM5780 Gigabit Ethernet' (string) pci.product_id = 5738 (0x166a) (int) pci.subsys_product_id = 5738 (0x166a) (int) pci.subsys_vendor = 'Broadcom Corporation' (string) pci.subsys_vendor_id = 5348 (0x14e4) (int) pci.vendor = 'Broadcom Corporation' (string) pci.vendor_id = 5348 (0x14e4) (int)udi = '/org/freedesktop/Hal/devices/net_00_e0_81_44_d3_7a' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_14e4_166a' (string) info.product = 'Networking Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_e0_81_44_d3_7a' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/0000:04:04.0/net/eth0' (string) net.80203.mac_address = 964241445754 (0xe08144d37a) (uint64) net.address = '00:e0:81:44:d3:7a' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth0' (string) net.linux.ifindex = 3 (0x3) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_14e4_166a' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)udi = '/org/freedesktop/Hal/devices/pci_1166_130' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'BCM5780 [HT2000] PCI-X bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_130' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0' (string) pci.product = 'BCM5780 [HT2000] PCI-X bridge' (string) pci.product_id = 304 (0x130) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/pci_8086_1229' info.linux.driver = 'e100' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82557/8/9/0/1 Ethernet Pro 100' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_8086_1229' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0' (string) pci.product = '82557/8/9/0/1 Ethernet Pro 100' (string) pci.product_id = 4649 (0x1229) (int) pci.subsys_product = 'EtherExpress PRO/100 S Server Adapter' (string) pci.subsys_product_id = 4160 (0x1040) (int) pci.subsys_vendor = 'Intel Corporation' (string) pci.subsys_vendor_id = 32902 (0x8086) (int) pci.vendor = 'Intel Corporation' (string) pci.vendor_id = 32902 (0x8086) (int)udi = '/org/freedesktop/Hal/devices/net_00_e0_81_41_f3_f0' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_8086_1229' (string) info.product = 'Networking Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_e0_81_41_f3_f0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/net/eth2' (string) net.80203.mac_address = 964241257456 (0xe08141f3f0) (uint64) net.address = '00:e0:81:41:f3:f0' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth2' (string) net.linux.ifindex = 2 (0x2) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_1229' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)udi = '/org/freedesktop/Hal/devices/pci_1166_223_1' info.linux.driver = 'ehci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'BCM5785 [HT1000] USB' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_223_1' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2' (string) pci.product = 'BCM5785 [HT1000] USB' (string) pci.product_id = 547 (0x223) (int) pci.subsys_product_id = 547 (0x223) (int) pci.subsys_vendor = 'Broadcom' (string) pci.subsys_vendor_id = 4454 (0x1166) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_2' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_223_1' (string) info.product = '2.0 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_2' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/001/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb1' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 4 (0x4) (int) usb_device.product = '2.0 root hub' (string) usb_device.product_id = 2 (0x2) (int) usb_device.serial = '0000:00:03.2' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 2.0 (2) (double)udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_2_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_2' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_2_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb1/1-0:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb1/1-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 4 (0x4) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 2 (0x2) (int) usb.serial = '0000:00:03.2' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 2.0 (2) (double)udi = '/org/freedesktop/Hal/devices/pci_1166_223_0' info.linux.driver = 'ohci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'BCM5785 [HT1000] USB' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_223_0' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1' (string) pci.product = 'BCM5785 [HT1000] USB' (string) pci.product_id = 547 (0x223) (int) pci.subsys_product_id = 547 (0x223) (int) pci.subsys_vendor = 'Broadcom' (string) pci.subsys_vendor_id = 4454 (0x1166) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_1' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_223_0' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_1' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/003/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:03.1' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double)udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_1_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_1' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_1_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3/3-0:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3/3-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:03.1' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double)udi = '/org/freedesktop/Hal/devices/pci_1166_223' info.linux.driver = 'ohci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'BCM5785 [HT1000] USB' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_223' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0' (string) pci.product = 'BCM5785 [HT1000] USB' (string) pci.product_id = 547 (0x223) (int) pci.subsys_product_id = 547 (0x223) (int) pci.subsys_vendor = 'Broadcom' (string) pci.subsys_vendor_id = 4454 (0x1166) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_223' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/002/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:03.0' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double)udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:03.0' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double)udi = '/org/freedesktop/Hal/devices/pci_1166_234' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'BCM5785 [HT1000] LPC' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_234' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.2' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.2' (string) pci.product = 'BCM5785 [HT1000] LPC' (string) pci.product_id = 564 (0x234) (int) pci.subsys_product_id = 560 (0x230) (int) pci.subsys_vendor = 'Broadcom' (string) pci.subsys_vendor_id = 4454 (0x1166) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_214' info.linux.driver = 'pata_serverworks' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'BCM5785 [HT1000] IDE' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_214' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 138 (0x8a) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string) pci.product = 'BCM5785 [HT1000] IDE' (string) pci.product_id = 532 (0x214) (int) pci.subsys_product_id = 532 (0x214) (int) pci.subsys_vendor = 'Broadcom' (string) pci.subsys_vendor_id = 4454 (0x1166) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_214_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_214' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_214_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/host5/scsi_host/host5' (string) scsi_host.host = 5 (0x5) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_214_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_214' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_214_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/host4' (string) scsi_host.host = 4 (0x4) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_214_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_214_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_214_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/host4/scsi_host/host4' (string) scsi_host.host = 4 (0x4) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_214_scsi_host_scsi_device_lun0' info.linux.driver = 'sr' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_214_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_214_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/host4/target4:0:1/4:0:1:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 4 (0x4) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'DV-28E-N' (string) scsi.target = 1 (0x1) (int) scsi.type = 'cdrom' (string) scsi.vendor = 'TEAC' (string)udi = '/org/freedesktop/Hal/devices/storage_model_DV_28E_N' block.device = '/dev/sr0' (string) block.is_volume = false (bool) block.major = 11 (0xb) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DV_28E_N' (string) info.addons = {'hald-addon-storage'} (string list) info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_1166_214_scsi_host_scsi_device_lun0' (string) info.product = 'DV-28E-N' (string) info.udi = '/org/freedesktop/Hal/devices/storage_model_DV_28E_N' (string) info.vendor = 'TEAC' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/host4/target4:0:1/4:0:1:0/block/sr0' (string) org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list) org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list) org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list) storage.automount_enabled_hint = true (bool) storage.bus = 'pci' (string) storage.cdrom.bd = false (bool) storage.cdrom.bdr = false (bool) storage.cdrom.bdre = false (bool) storage.cdrom.cdr = false (bool) storage.cdrom.cdrw = false (bool) storage.cdrom.dvd = true (bool) storage.cdrom.dvdplusr = false (bool) storage.cdrom.dvdplusrdl = false (bool) storage.cdrom.dvdplusrw = false (bool) storage.cdrom.dvdplusrwdl = false (bool) storage.cdrom.dvdr = false (bool) storage.cdrom.dvdram = false (bool) storage.cdrom.dvdrdl = false (bool) storage.cdrom.dvdrw = false (bool) storage.cdrom.hddvd = false (bool) storage.cdrom.hddvdr = false (bool) storage.cdrom.hddvdrw = false (bool) storage.cdrom.mo = false (bool) storage.cdrom.mrw = true (bool) storage.cdrom.mrw_w = true (bool) storage.cdrom.read_speed = 4234 (0x108a) (int) storage.cdrom.support_media_changed = true (bool) storage.cdrom.support_multisession = true (bool) storage.cdrom.write_speed = 0 (0x0) (int) storage.cdrom.write_speeds = {} (string list) storage.drive_type = 'cdrom' (string) storage.firmware_version = '1.6A' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'DV-28E-N' (string) storage.no_partitions_hint = true (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = '' (string) storage.policy.mount_option.iocharset=utf8 = true (bool) storage.policy.mount_option.utf8 = true (bool) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = true (bool) storage.size = 0 (0x0) (uint64) storage.vendor = 'TEAC' (string)udi = '/org/freedesktop/Hal/devices/pci_1166_214_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_214_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_214_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/host4/target4:0:1/4:0:1:0/scsi_generic/sg2' (string) scsi_generic.device = '/dev/sg2' (string)udi = '/org/freedesktop/Hal/devices/pci_1166_205' info.linux.driver = 'piix4_smbus' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'BCM5785 [HT1000] Legacy South Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_205' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string) pci.product = 'BCM5785 [HT1000] Legacy South Bridge' (string) pci.product_id = 517 (0x205) (int) pci.subsys_product_id = 513 (0x201) (int) pci.subsys_vendor = 'Broadcom' (string) pci.subsys_vendor_id = 4454 (0x1166) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_36' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'BCM5785 [HT1000] PCI/PCI-X Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_36' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.product = 'BCM5785 [HT1000] PCI/PCI-X Bridge' (string) pci.product_id = 54 (0x36) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_24b_0' info.parent = '/org/freedesktop/Hal/devices/pci_1166_36' (string) info.product = 'BCM5785 [HT1000] SATA (PATA/IDE Mode)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_24b_0' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.1' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 143 (0x8f) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.1' (string) pci.product = 'BCM5785 [HT1000] SATA (PATA/IDE Mode)' (string) pci.product_id = 587 (0x24b) (int) pci.subsys_product_id = 587 (0x24b) (int) pci.subsys_vendor = 'Broadcom' (string) pci.subsys_vendor_id = 4454 (0x1166) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_24b' info.linux.driver = 'sata_svw' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_36' (string) info.product = 'BCM5785 [HT1000] SATA (PATA/IDE Mode)' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_24b' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 143 (0x8f) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0' (string) pci.product = 'BCM5785 [HT1000] SATA (PATA/IDE Mode)' (string) pci.product_id = 587 (0x24b) (int) pci.subsys_product_id = 587 (0x24b) (int) pci.subsys_vendor = 'Broadcom' (string) pci.subsys_vendor_id = 4454 (0x1166) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_2' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_24b' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host3/scsi_host/host3' (string) scsi_host.host = 3 (0x3) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_1' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_24b' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host2/scsi_host/host2' (string) scsi_host.host = 2 (0x2) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_24b' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host1' (string) scsi_host.host = 1 (0x1) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_0_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_0_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host1/scsi_host/host1' (string) scsi_host.host = 1 (0x1) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_0_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_0' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_0_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host1/target1:0:0/1:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 1 (0x1) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'ST3250620AS' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'ATA' (string)udi = '/org/freedesktop/Hal/devices/storage_serial_ST3250620AS_3QF0KPT4' block.device = '/dev/sdb' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 16 (0x10) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_ST3250620AS_3QF0KPT4' (string) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_0_scsi_device_lun0' (string) info.product = 'ST3250620AS' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_ST3250620AS_3QF0KPT4' (string) info.vendor = 'ATA' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host1/target1:0:0/1:0:0:0/block/sdb' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'pci' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '3.AAE' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = false (bool) storage.model = 'ST3250620AS' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = false (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 250059350016 (0x3a38b2e000) (uint64) storage.requires_eject = false (bool) storage.serial = 'ST3250620AS_3QF0KPT4' (string) storage.size = 250059350016 (0x3a38b2e000) (uint64) storage.vendor = 'ATA' (string)udi = '/org/freedesktop/Hal/devices/volume_uuid_b528f65a_8e8c_4c2e_a986_2b7577fc7133' block.device = '/dev/sdb2' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 18 (0x12) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_ST3250620AS_3QF0KPT4' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_ST3250620AS_3QF0KPT4' (string) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_b528f65a_8e8c_4c2e_a986_2b7577fc7133' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host1/target1:0:0/1:0:0:0/block/sdb/sdb2' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'relatime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/mnt/iso' (string) volume.num_blocks = 195414660 (0xba5ca84) (uint64) volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64) volume.partition.number = 2 (0x2) (int) volume.partition.start = 150004431360 (0x22ecf5fa00) (uint64) volume.size = 100052305920 (0x174b950800) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = 'b528f65a-8e8c-4c2e-a986-2b7577fc7133' (string)udi = '/org/freedesktop/Hal/devices/volume_uuid_e432bf69_a571_4884_8e25_ca5d61b2ba28' block.device = '/dev/sdb1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 17 (0x11) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_ST3250620AS_3QF0KPT4' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_ST3250620AS_3QF0KPT4' (string) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_e432bf69_a571_4884_8e25_ca5d61b2ba28' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host1/target1:0:0/1:0:0:0/block/sdb/sdb1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'relatime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/mnt/pieces' (string) volume.num_blocks = 292977342 (0x11767abe) (uint64) volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.start = 32256 (0x7e00) (uint64) volume.size = 150004399104 (0x22ecf57c00) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = 'e432bf69-a571-4884-8e25-ca5d61b2ba28' (string)udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_0_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_0_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_0_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host1/target1:0:0/1:0:0:0/scsi_generic/sg1' (string) scsi_generic.device = '/dev/sg1' (string)udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_24b' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host0' (string) scsi_host.host = 0 (0x0) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host0/scsi_host/host0' (string) scsi_host.host = 0 (0x0) (int)udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host0/target0:0:0/0:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'WDC WD1200JS-00N' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'ATA' (string)udi = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD1200JS_00NCB1_WD_WCANP1126559' block.device = '/dev/sda' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD1200JS_00NCB1_WD_WCANP1126559' (string) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_scsi_device_lun0' (string) info.product = 'WDC WD1200JS-00N' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD1200JS_00NCB1_WD_WCANP1126559' (string) info.vendor = 'ATA' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host0/target0:0:0/0:0:0:0/block/sda' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'pci' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '10.02E10' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = false (bool) storage.model = 'WDC WD1200JS-00N' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = false (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 120034123776 (0x1bf2976000) (uint64) storage.requires_eject = false (bool) storage.serial = 'WDC_WD1200JS-00NCB1_WD-WCANP1126559' (string) storage.size = 120034123776 (0x1bf2976000) (uint64) storage.vendor = 'ATA' (string)udi = '/org/freedesktop/Hal/devices/volume_uuid_993aed6e_0dfd_43d7_a9e7_e6856a8b275d' block.device = '/dev/sda1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 1 (0x1) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD1200JS_00NCB1_WD_WCANP1126559' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD1200JS_00NCB1_WD_WCANP1126559' (string) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_993aed6e_0dfd_43d7_a9e7_e6856a8b275d' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'relatime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/' (string) volume.num_blocks = 16370172 (0xf9c9fc) (uint64) volume.partition.media_size = 120034123776 (0x1bf2976000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.start = 32256 (0x7e00) (uint64) volume.size = 8381528064 (0x1f393f800) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '993aed6e-0dfd-43d7-a9e7-e6856a8b275d' (string)udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' block.device = '/dev/sda2' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 2 (0x2) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD1200JS_00NCB1_WD_WCANP1126559' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD1200JS_00NCB1_WD_WCANP1126559' (string) info.product = 'Volume' (string) info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda2' (string) volume.block_size = 512 (0x200) (int) volume.fstype = '' (string) volume.fsusage = 'partitiontable' (string) volume.fsversion = '' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 2 (0x2) (uint64) volume.partition.flags = {} (string list) volume.partition.label = '' (string) volume.partition.media_size = 120034123776 (0x1bf2976000) (uint64) volume.partition.number = 2 (0x2) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 8381560320 (0x1f3947600) (uint64) volume.partition.type = '0x05' (string) volume.partition.uuid = '' (string) volume.size = 1024 (0x400) (uint64) volume.uuid = '' (string)udi = '/org/freedesktop/Hal/devices/volume_uuid_a090900f_0923_4954_ae1d_a4ee611eb3a4' block.device = '/dev/sda6' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 6 (0x6) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD1200JS_00NCB1_WD_WCANP1126559' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD1200JS_00NCB1_WD_WCANP1126559' (string) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_a090900f_0923_4954_ae1d_a4ee611eb3a4' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda6' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'relatime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/home' (string) volume.num_blocks = 209889162 (0xc82a78a) (uint64) volume.partition.media_size = 120034123776 (0x1bf2976000) (uint64) volume.partition.number = 6 (0x6) (int) volume.partition.start = 12568260096 (0x2ed206e00) (uint64) volume.size = 107463250944 (0x19054f1400) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = 'a090900f-0923-4954-ae1d-a4ee611eb3a4' (string)udi = '/org/freedesktop/Hal/devices/volume_uuid_6e449256_713c_4b30_9a00_192df9c8e791' block.device = '/dev/sda5' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 5 (0x5) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD1200JS_00NCB1_WD_WCANP1126559' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD1200JS_00NCB1_WD_WCANP1126559' (string) info.product = 'Volume (swap)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_6e449256_713c_4b30_9a00_192df9c8e791' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host0/target0:0:0/0:0:0:0/block/sda/sda5' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'swap' (string) volume.fsusage = 'other' (string) volume.fsversion = '2' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 8177022 (0x7cc57e) (uint64) volume.partition.media_size = 120034123776 (0x1bf2976000) (uint64) volume.partition.number = 5 (0x5) (int) volume.partition.start = 8381592576 (0x1f394f400) (uint64) volume.size = 4186635264 (0xf98afc00) (uint64) volume.uuid = '6e449256-713c-4b30-9a00-192df9c8e791' (string)udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_24b_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0e.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0' (string) scsi_generic.device = '/dev/sg0' (string)udi = '/org/freedesktop/Hal/devices/pci_1166_104' info.parent = '/org/freedesktop/Hal/devices/pci_1166_36' (string) info.product = 'BCM5785 [HT1000] PCI/PCI-X Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1166_104' (string) info.vendor = 'Broadcom' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0d.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:0d.0' (string) pci.product = 'BCM5785 [HT1000] PCI/PCI-X Bridge' (string) pci.product_id = 260 (0x104) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Broadcom' (string) pci.vendor_id = 4454 (0x1166) (int)Dumped 93 device(s) from the Global Device List.------------------------------------------------