Reading package lists...Building dependency tree...Reading state information...Reading extended state information...Initialising package states...The following NEW packages will be installed: fancontrol{a} libsensors4{a} lm-sensors 0 packages upgraded, 3 newly installed, 0 to remove and 0 not upgraded.Need to get 210kB of archives. After unpacking 786kB will be used.Writing extended state information...Get:1 http://ppa.launchpad.net karmic/main libsensors4 1:3.1.2-2~ppa1 [54.2kB]Get:2 http://ppa.launchpad.net karmic/main fancontrol 1:3.1.2-2~ppa1 [40.9kB]Get:3 http://ppa.launchpad.net karmic/main lm-sensors 1:3.1.2-2~ppa1 [115kB]Fetched 210kB in 0s (537kB/s)Selecting previously deselected package libsensors4.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 43427 files and directories currently installed.)
Unpacking libsensors4 (from .../libsensors4_1%3a3.1.2-2~ppa1_amd64.deb) ...
Selecting previously deselected package fancontrol.
Unpacking fancontrol (from .../fancontrol_1%3a3.1.2-2~ppa1_all.deb) ...
Selecting previously deselected package lm-sensors.
Unpacking lm-sensors (from .../lm-sensors_1%3a3.1.2-2~ppa1_amd64.deb) ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
Setting up libsensors4 (1:3.1.2-2~ppa1) ...
Setting up fancontrol (1:3.1.2-2~ppa1) ...
Setting up lm-sensors (1:3.1.2-2~ppa1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Reading package lists...Building dependency tree...Reading state information...Reading extended state information...Initialising package states...Writing extended state information...--2010-06-20 02:38:53-- http://dl.dropbox.com/u/4953107/XCI/TempSensors/sensors-detectResolving dl.dropbox.com... 75.101.129.115, 184.73.197.205, 75.101.142.97, ...Connecting to dl.dropbox.com|75.101.129.115|:80... connected.HTTP request sent, awaiting response... 200 OKLength: 169271 (165K) [application/octet-stream]Saving to: `sensors-detect' 0K .......... .......... .......... .......... .......... 30% 114K 1s 50K .......... .......... .......... .......... .......... 60% 393K 0s 100K .......... .......... .......... .......... .......... 90% 419K 0s 150K .......... ..... 100% 2.09M=0.7s2010-06-20 02:38:55 (239 KB/s) - `sensors-detect' saved [169271/169271]--2010-06-20 02:38:55-- http://dl.dropbox.com/u/4953107/XCI/TempSensors/sensors-inputResolving dl.dropbox.com... 184.73.197.205, 75.101.142.97, 75.101.136.120, ...Connecting to dl.dropbox.com|184.73.197.205|:80... connected.HTTP request sent, awaiting response... 200 OKLength: 21 [application/octet-stream]Saving to: `sensors-input' 0K 100% 813K=0s2010-06-20 02:38:55 (813 KB/s) - `sensors-input' saved [21/21]--2010-06-20 02:38:55-- http://dl.dropbox.com/u/4953107/XCI/TempSensors/sensors3.confResolving dl.dropbox.com... 75.101.142.97, 75.101.136.120, 75.101.148.191, ...Connecting to dl.dropbox.com|75.101.142.97|:80... connected.HTTP request sent, awaiting response... 200 OKLength: 8283 (8.1K) [application/octet-stream]Saving to: `sensors3.conf' 0K ........ 100% 76.1K=0.1s2010-06-20 02:38:56 (76.1 KB/s) - `sensors3.conf' saved [8283/8283]# sensors-detect revision 5822 (2010-02-04 09:14:10 +0100)# System: Acer Aspire R3610# Board: Acer FMCP7A-ION-LEThis program will help you determine which kernel modules you needto load to use lm_sensors most effectively. It is generally safeand recommended to accept the default answers to all questions,unless you know what you're doing.Some south bridges, CPUs or memory controllers contain embedded sensors.Do you want to scan for them? This is totally safe. (YES/no): Silicon Integrated Systems SIS5595... NoVIA VT82C686 Integrated Sensors... NoVIA VT8231 Integrated Sensors... NoAMD K8 thermal sensors... NoAMD Family 10h thermal sensors... NoAMD Family 11h thermal sensors... NoIntel Core family thermal sensor... NoIntel Atom thermal sensor... Success! (driver `coretemp')Intel AMB FB-DIMM thermal sensor... NoVIA C7 thermal sensor... NoVIA Nano thermal sensor... NoSome Super I/O chips contain embedded sensors. We have to write tostandard I/O ports to probe them. This is usually safe.Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2fTrying family `National Semiconductor'... NoTrying family `SMSC'... NoTrying family `VIA/Winbond/Nuvoton/Fintek'... NoTrying family `ITE'... YesFound `ITE IT8720F Super IO Sensors' Success! (address 0xa10, driver `it87')Probing for Super-I/O at 0x4e/0x4fTrying family `National Semiconductor'... NoTrying family `SMSC'... NoTrying family `VIA/Winbond/Nuvoton/Fintek'... NoTrying family `ITE'... NoSome systems (mainly servers) implement IPMI, a set of common interfacesthrough which system health data may be retrieved, amongst other things.We first try to get the information from SMBIOS. If we don't find itthere, we have to read from arbitrary I/O ports to probe for suchinterfaces. This is normally safe. Do you want to scan for IPMIinterfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... NoProbing for `IPMI BMC SMIC' at 0xca8... NoSome hardware monitoring chips are accessible through the ISA I/O ports.We have to write to arbitrary I/O ports to probe them. This is usuallysafe though. Yes, you do have ISA I/O ports even if you do not have anyISA slots! Do you want to scan the ISA I/O ports? (yes/NO): Probing for `National Semiconductor LM78' at 0x290... NoProbing for `National Semiconductor LM79' at 0x290... NoProbing for `Winbond W83781D' at 0x290... NoProbing for `Winbond W83782D' at 0x290... NoLastly, we can probe the I2C/SMBus adapters for connected hardwaremonitoring devices. This is the most risky part, and while it worksreasonably well on most systems, it has been reported to cause troubleon some systems.Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-nforce2' for device 0000:00:03.2: nVidia Corporation nForce SMBus (MCP79)Module i2c-dev loaded successfully.Next adapter: NVIDIA i2c adapter (i2c-0)Do you want to scan it? (YES/no/selectively): Client found at address 0x50Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoProbing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip)Next adapter: NVIDIA i2c adapter (i2c-1)Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-2)Do you want to scan it? (YES/no/selectively): Now follows a summary of the probes I have just done.Just press ENTER to continue: Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9)Driver `coretemp': * Chip `Intel Atom thermal sensor' (confidence: 9)Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): To load everything that is needed, add this to one of the systeminitialization scripts (e.g. /etc/rc.d/rc.local):#----cut here----# Chip driversmodprobe coretempmodprobe it87/usr/bin/sensors -s#----cut here----If you have some drivers built into your kernel, the list above willcontain too many modules. Skip the appropriate ones! You reallyshould try these commands right now to make sure everything isworking properly. Monitoring programs won't work until the neededmodules are loaded.Unloading i2c-dev... OK * Setting sensors limits ...done.Reading package lists...Building dependency tree...Reading state information...Reading extended state information...Initialising package states...The following NEW packages will be installed: autoconf{a} automake autotools-dev{a} cvs m4{a} update-inetd{a} 0 packages upgraded, 6 newly installed, 0 to remove and 0 not upgraded.Need to get 3,199kB of archives. After unpacking 8,618kB will be used.Writing extended state information...Get:1 http://gb.archive.ubuntu.com karmic/main m4 1.4.13-2 [286kB]Get:2 http://gb.archive.ubuntu.com karmic/main autoconf 2.64-1ubuntu1 [558kB]Get:3 http://gb.archive.ubuntu.com karmic/main autotools-dev 20090427.1 [63.7kB]Get:4 http://gb.archive.ubuntu.com karmic/main automake 1:1.11-1 [559kB]Get:5 http://gb.archive.ubuntu.com karmic/main update-inetd 4.31 [16.9kB]Get:6 http://gb.archive.ubuntu.com karmic/main cvs 1:1.12.13-12ubuntu1 [1,716kB]Preconfiguring packages ...Fetched 3,199kB in 1s (1,764kB/s)Selecting previously deselected package m4.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 43486 files and directories currently installed.)
Unpacking m4 (from .../archives/m4_1.4.13-2_amd64.deb) ...
Selecting previously deselected package autoconf.
Unpacking autoconf (from .../autoconf_2.64-1ubuntu1_all.deb) ...
Selecting previously deselected package autotools-dev.
Unpacking autotools-dev (from .../autotools-dev_20090427.1_all.deb) ...
Selecting previously deselected package automake.
Unpacking automake (from .../automake_1%3a1.11-1_all.deb) ...
Selecting previously deselected package update-inetd.
Unpacking update-inetd (from .../update-inetd_4.31_all.deb) ...
Selecting previously deselected package cvs.
Unpacking cvs (from .../cvs_1%3a1.12.13-12ubuntu1_amd64.deb) ...
Processing triggers for install-info ...
Processing triggers for man-db ...
Setting up m4 (1.4.13-2) ...
Setting up autoconf (2.64-1ubuntu1) ...
Ignoring install-info called from maintainer script
The package autoconf should be rebuild with new debhelper to get trigger support
Ignoring install-info called from maintainer script
The package autoconf should be rebuild with new debhelper to get trigger support
Ignoring install-info called from maintainer script
The package autoconf should be rebuild with new debhelper to get trigger support
Setting up autotools-dev (20090427.1) ...
Setting up automake (1:1.11-1) ...
update-alternatives: using /usr/bin/automake-1.11 to provide /usr/bin/automake (automake) in auto mode.
Setting up update-inetd (4.31) ...
Setting up cvs (1:1.12.13-12ubuntu1) ...
Ignoring install-info called from maintainer script
The package cvs should be rebuild with new debhelper to get trigger support
Ignoring install-info called from maintainer script
The package cvs should be rebuild with new debhelper to get trigger support
Reading package lists...Building dependency tree...Reading state information...Reading extended state information...Initialising package states...Writing extended state information...cvs checkout: CVS password file /root/.cvspass does not exist - creating a new fileFatal error, aborting.anoncvs_nvclock: no such system user./xci.sh: line 1331: ./configure: No such file or directorymake: *** No targets specified and no makefile found. Stop.make: *** No rule to make target `install'. Stop.--2010-06-20 02:39:22-- http://dl.dropbox.com/u/4953107/XCI/TempSensors/hddtemp.inputResolving dl.dropbox.com... 75.101.136.120, 75.101.148.191, 174.129.33.159, ...Connecting to dl.dropbox.com|75.101.136.120|:80... connected.HTTP request sent, awaiting response... 200 OKLength: 283 [application/octet-stream]Saving to: `hddtemp.input' 0K 100% 10.7M=0s2010-06-20 02:39:22 (10.7 MB/s) - `hddtemp.input' saved [283/283]sed: can't read /home/xbmc/.xbmc/userdata/advancedsettings.xml: No such file or directorysed: can't read /home/xbmc/.xbmc/userdata/advancedsettings.xml: No such file or directorysed: can't read /home/xbmc/.xbmc/userdata/advancedsettings.xml: No such file or directorysed: can't read /home/xbmc/.xbmc/userdata/advancedsettings.xml: No such file or directory--2010-06-20 02:39:34-- http://dl.dropbox.com/u/4953107/XCI/TempSensors/advancedsettings-w83627ehfResolving dl.dropbox.com... 75.101.148.191, 174.129.33.159, 174.129.212.16, ...Connecting to dl.dropbox.com|75.101.148.191|:80... connected.HTTP request sent, awaiting response... 200 OKLength: 438 [application/octet-stream]Saving to: `advancedsettings-w83627ehf' 0K 100% 12.1M=0s2010-06-20 02:39:35 (12.1 MB/s) - `advancedsettings-w83627ehf' saved [438/438]sed: can't read /home/xbmc/.xbmc/userdata/advancedsettings.xml: No such file or directorychown: invalid user: `xbmc:xbmc'xbmc-live stop/waitingxbmc-live start/running, process 4507