ddb> dmesg
OpenBSD 4.7 (GENERIC) #558: Wed Mar 17 20:46:15 MDT 2010
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 333 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,M
MX,FXSR
real mem = 670658560 (639MB)
avail mem = 641105920 (611MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/14/99, BIOS32 rev. 0 @ 0xf7770
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 66MHz
cpu at mainbus0: not configured
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type PCI
mpbios0: bus 3 is type EISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
pcibios0 at bios0: rev 2.1 @ 0xf7570/0x11d0
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x2c00
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
ppb0 at pci0 dev 13 function 0 "DEC 21152 PCI-PCI" rev 0x02
pci1 at ppb0 bus 1
ahc0 at pci1 dev 10 function 0 "Adaptec AIC-7880" rev 0x00: apic 2 int 11 (irq 11)
scsibus0 at ahc0: 16 targets, initiator 7
ahc1 at pci1 dev 11 function 0 "Adaptec AIC-7860" rev 0x01: apic 2 int 11 (irq 11)
scsibus1 at ahc1: 8 targets, initiator 7
cd0 at scsibus1 targ 5 lun 0: <NEC, CD-ROM DRIVE:464, 1.05> SCSI2 5/cdrom removable
st0 at scsibus1 targ 6 lun 0: <ARCHIVE, Python 00095-001, 5.ac> SCSI2 1/sequential removable
ppb1 at pci1 dev 13 function 0 "Intel i960 RP PCI-PCI" rev 0x05
pci2 at ppb1 bus 2
ami0 at pci1 dev 13 function 1 "Intel 80960RP ATU" rev 0x05: apic 2 int 9 (irq 9)
ami0: AMI 438, 32b, FW GH8E, BIOS v1.48, 16MB RAM
ami0: 3 channels, 16 targets, 1 logical drives
scsibus2 at ami0: 1 targets
sd0 at scsibus2 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 43410MB, 512 bytes/sec, 88903680 sec total
"Intel 82375EB EISA" rev 0x15 at pci0 dev 15 function 0 not configured
dc0 at pci0 dev 16 function 0 "ADMtek AN983" rev 0x11: apic 2 int 10 (irq 10), a
ddress 00:10:a7:29:5d:17
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI 0x000749,
model 0x0001
vga1 at pci0 dev 20 function 0 "ATI Mach64" rev 0x40
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
eisa0 at mainbus0
eisa0: can't map i/o space for slot 14
eisa0: can't map i/o space for slot 15
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
panic: no isa bus
Stopped at Debugger+0x4: leave
Debugger(d155f740,0,d08dc178,4,d1721000) at Debugger+0x4
panic(d0826766,2,1,2,d086e198) at panic+0x55
isa_intr_establish(0,4,2,80,d029790c) at isa_intr_establish+0x1f3
com_isa_attach(d1719e00,d1721000,d0a3e810,d1719e00,d5468ae0) at com_isa_attach+0x99
config_attach(d1719e00,d1721000,d0a3e810,d061116c,d0203001) at config_attach+0xfd
isascan(d1719e00,d1721000,4,1) at isascan+0x14e
config_scan(d0611274,d1719e00,d0a3ee70,d1560fc0,d155fe80) at config_scan+0xaf
config_attach(d1560fc0,d086621c,d0a3ee70,d04f30c4) at config_attach+0xfd
mainbus_attach(0,d1560fc0,0,da4a1000,d0a3d334) at mainbus_attach+0x150
config_attach(0,d08646d4,0,0,0) at config_attach+0xfd
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> Debugger(d155f740,0,d08dc178,4,d1721000) at Debugger+0x4
panic(d0826766,2,1,2,d086e198) at panic+0x55
isa_intr_establish(0,4,2,80,d029790c) at isa_intr_establish+0x1f3
com_isa_attach(d1719e00,d1721000,d0a3e810,d1719e00,d5468ae0) at com_isa_attach+0x99
config_attach(d1719e00,d1721000,d0a3e810,d061116c,d0203001) at config_attach+0xfd
isascan(d1719e00,d1721000,4,1) at isascan+0x14e
config_scan(d0611274,d1719e00,d0a3ee70,d1560fc0,d155fe80) at config_scan+0xaf
config_attach(d1560fc0,d086621c,d0a3ee70,d04f30c4) at config_attach+0xfd
mainbus_attach(0,d1560fc0,0,da4a1000,d0a3d334) at mainbus_attach+0x150
config_attach(0,d08646d4,0,0,0) at config_attach+0xfd
config_rootfound(d07810e2,0,d0a3ef38,d04c1b6a) at config_rootfound+0x27
cpu_configure(d098dee0,1,3,0,2) at cpu_configure+0x29
main(0,0,0,0,0) at main+0x3a3
ddb> trace
Debugger(d155f740,0,d08dc178,4,d1721000) at Debugger+0x4
panic(d0826766,2,1,2,d086e198) at panic+0x55
isa_intr_establish(0,4,2,80,d029790c) at isa_intr_establish+0x1f3
com_isa_attach(d1719e00,d1721000,d0a3e810,d1719e00,d5468ae0) at com_isa_attach+
0x99
config_attach(d1719e00,d1721000,d0a3e810,d061116c,d0203001) at config_attach+0x
fd
isascan(d1719e00,d1721000,4,1) at isascan+0x14e
config_scan(d0611274,d1719e00,d0a3ee70,d1560fc0,d155fe80) at config_scan+0xaf
config_attach(d1560fc0,d086621c,d0a3ee70,d04f30c4) at config_attach+0xfd
mainbus_attach(0,d1560fc0,0,da4a1000,d0a3d334) at mainbus_attach+0x150
config_attach(0,d08646d4,0,0,0) at config_attach+0xfd
config_rootfound(d07810e2,0,d0a3ef38,d04c1b6a) at config_rootfound+0x27
cpu_configure(d098dee0,1,3,0,2) at cpu_configure+0x29
main(0,0,0,0,0) at main+0x3a3
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x80200 swapper