rendered paste body[ 0.000000] Linux version 2.6.31.12-0.2-desktop (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT 2010-03-16 21:25:39 +0100[ 0.000000] KERNEL supported cpus:[ 0.000000] Intel GenuineIntel[ 0.000000] AMD AuthenticAMD[ 0.000000] NSC Geode by NSC[ 0.000000] Cyrix CyrixInstead[ 0.000000] Centaur CentaurHauls[ 0.000000] Transmeta GenuineTMx86[ 0.000000] Transmeta TransmetaCPU[ 0.000000] UMC UMC UMC UMC[ 0.000000] BIOS-provided physical RAM map:[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)[ 0.000000] BIOS-e820: 000000003f7d0000 - 000000003f7e5600 (reserved)[ 0.000000] BIOS-e820: 000000003f7e5600 - 000000003f7f8000 (ACPI NVS)[ 0.000000] BIOS-e820: 000000003f7f8000 - 000000003f800000 (reserved)[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)[ 0.000000] DMI 2.4 present.[ 0.000000] last_pfn = 0x3f7d0 max_arch_pfn = 0x1000000[ 0.000000] MTRR default type: uncachable[ 0.000000] MTRR fixed ranges enabled:[ 0.000000] 00000-9FFFF write-back[ 0.000000] A0000-BFFFF uncachable[ 0.000000] C0000-D3FFF write-protect[ 0.000000] D4000-EFFFF uncachable[ 0.000000] F0000-FFFFF write-protect[ 0.000000] MTRR variable ranges enabled:[ 0.000000] 0 base 000000000 mask FC0000000 write-back[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable[ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 uncachable[ 0.000000] 3 disabled[ 0.000000] 4 disabled[ 0.000000] 5 disabled[ 0.000000] 6 disabled[ 0.000000] 7 disabled[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)[ 0.000000] Scanning 1 areas for low memory corruption[ 0.000000] modified physical RAM map:[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)[ 0.000000] modified: 0000000000100000 - 000000003f7d0000 (usable)[ 0.000000] modified: 000000003f7d0000 - 000000003f7e5600 (reserved)[ 0.000000] modified: 000000003f7e5600 - 000000003f7f8000 (ACPI NVS)[ 0.000000] modified: 000000003f7f8000 - 000000003f800000 (reserved)[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)[ 0.000000] modified: 00000000fed20000 - 00000000fed9b000 (reserved)[ 0.000000] modified: 00000000feda0000 - 00000000fedc0000 (reserved)[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)[ 0.000000] modified: 00000000ffb00000 - 00000000ffc00000 (reserved)[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)[ 0.000000] initial memory mapped : 0 - 01000000[ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000[ 0.000000] NX (Execute Disable) protection: active[ 0.000000] 0000000000 - 0000200000 page 4k[ 0.000000] 0000200000 - 0036e00000 page 2M[ 0.000000] 0036e00000 - 0036ffe000 page 4k[ 0.000000] kernel direct mapping tables up to 36ffe000 @ 7000-12000[ 0.000000] RAMDISK: 37a14000 - 37fef576[ 0.000000] Allocated new RAMDISK: 00af9000 - 010d4576[ 0.000000] Move RAMDISK from 0000000037a14000 - 0000000037fef575 to 00af9000 - 010d4575[ 0.000000] ACPI: RSDP 000f7f70 00024 (v02 HP )[ 0.000000] ACPI: XSDT 3f7e57c4 00074 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)[ 0.000000] ACPI: FACP 3f7e5684 000F4 (v04 HP 30AA 00000003 HP 00000001)[ 0.000000] ACPI: DSDT 3f7e5948 0F264 (v01 HP nc6340 00010000 MSFT 0100000E)[ 0.000000] ACPI: FACS 3f7f7e80 00040[ 0.000000] ACPI: HPET 3f7e5838 00038 (v01 HP 30AA 00000001 HP 00000001)[ 0.000000] ACPI: APIC 3f7e5870 00068 (v01 HP 30AA 00000001 HP 00000001)[ 0.000000] ACPI: MCFG 3f7e58d8 0003C (v01 HP 30AA 00000001 HP 00000001)[ 0.000000] ACPI: TCPA 3f7e5914 00032 (v02 HP 30AA 00000001 HP 00000001)[ 0.000000] ACPI: SSDT 3f7f4bac 00068 (v01 HP HPQNLP 00000001 MSFT 0100000E)[ 0.000000] ACPI: SSDT 3f7f4c14 00326 (v01 HP HPQSAT 00000001 MSFT 0100000E)[ 0.000000] ACPI: SSDT 3f7f5940 0025F (v01 HP Cpu0Tst 00003000 INTL 20050624)[ 0.000000] ACPI: SSDT 3f7f5b9f 000A6 (v01 HP Cpu1Tst 00003000 INTL 20050624)[ 0.000000] ACPI: SSDT 3f7f5c45 004E7 (v01 HP CpuPm 00003000 INTL 20050624)[ 0.000000] ACPI: Local APIC address 0xfee00000[ 0.000000] could not find any ACPI SRAT memory areas.[ 0.000000] failed to get NUMA memory information from SRAT table[ 0.000000] NUMA - single node, flat memory mode[ 0.000000] Node: 0, start_pfn: 0, end_pfn: 3f7d0[ 0.000000] Setting physnode_map array to node 0 for pfns:[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 [ 0.000000] node 0 pfn: [0 - 3f7d0][ 0.000000] Reserving 2048 pages of KVA for lmem_map of node 0 at 3ee00[ 0.000000] remove_active_range (0, 257536, 259584)[ 0.000000] Reserving total of 800 pages for numa KVA remap[ 0.000000] kva_start_pfn ~ 36600 max_low_pfn ~ 36ffe[ 0.000000] max_pfn = 3f7d0[ 0.000000] 135MB HIGHMEM available.[ 0.000000] 879MB LOWMEM available.[ 0.000000] max_low_pfn = 36ffe, highstart_pfn = 36ffe[ 0.000000] Low memory ends at vaddr f6ffe000[ 0.000000] node 0 will remap to vaddr f6600000 - f6e00000[ 0.000000] allocate_pgdat: node 0 NODE_DATA f6600000[ 0.000000] remap_numa_kva: node 0[ 0.000000] remap_numa_kva: f6600000 to pfn 0003ee00[ 0.000000] remap_numa_kva: f6800000 to pfn 0003f000[ 0.000000] remap_numa_kva: f6a00000 to pfn 0003f200[ 0.000000] remap_numa_kva: f6c00000 to pfn 0003f400[ 0.000000] High memory starts at vaddr f6ffe000[ 0.000000] mapped low ram: 0 - 36ffe000[ 0.000000] low ram: 0 - 36ffe000[ 0.000000] node 0 low ram: 00000000 - 36ffe000[ 0.000000] node 0 bootmap 0000f000 - 00015e00[ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 0036ffe000][ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000][ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000][ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000][ 0.000000] #3 [0000200000 - 0000aefa90] TEXT DATA BSS ==> [0000200000 - 0000aefa90][ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000][ 0.000000] #5 [0000af0000 - 0000af8148] BRK ==> [0000af0000 - 0000af8148][ 0.000000] #6 [0000007000 - 000000f000] PGTABLE ==> [0000007000 - 000000f000][ 0.000000] #7 [0000af9000 - 00010d4576] NEW RAMDISK ==> [0000af9000 - 00010d4576][ 0.000000] #8 [003ee00000 - 003f600000] KVA RAM[ 0.000000] #9 [0036600000 - 0036e00000] KVA PG ==> [0036600000 - 0036e00000][ 0.000000] #10 [000000f000 - 0000016000] BOOTMAP ==> [000000f000 - 0000016000][ 0.000000] Zone PFN ranges:[ 0.000000] DMA 0x00000000 -> 0x00001000[ 0.000000] Normal 0x00001000 -> 0x00036ffe[ 0.000000] HighMem 0x00036ffe -> 0x0003f7d0[ 0.000000] Movable zone start PFN for each node[ 0.000000] early_node_map[4] active PFN ranges[ 0.000000] 0: 0x00000000 -> 0x00000002[ 0.000000] 0: 0x00000006 -> 0x0000009f[ 0.000000] 0: 0x00000100 -> 0x0003ee00[ 0.000000] 0: 0x0003f600 -> 0x0003f7d0[ 0.000000] On node 0 totalpages: 257899[ 0.000000] free_area_init_node: node 0, pgdat f6600000, node_mem_map f6602000[ 0.000000] DMA zone: 32 pages used for memmap[ 0.000000] DMA zone: 0 pages reserved[ 0.000000] DMA zone: 3963 pages, LIFO batch:0[ 0.000000] Normal zone: 1728 pages used for memmap[ 0.000000] Normal zone: 219454 pages, LIFO batch:31[ 0.000000] HighMem zone: 272 pages used for memmap[ 0.000000] HighMem zone: 32450 pages, LIFO batch:7[ 0.000000] Using APIC driver default[ 0.000000] ACPI: PM-Timer IO Port: 0x1008[ 0.000000] ACPI: Local APIC address 0xfee00000[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)[ 0.000000] ACPI: IRQ0 used by override.[ 0.000000] ACPI: IRQ2 used by override.[ 0.000000] ACPI: IRQ9 used by override.[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs[ 0.000000] Using ACPI (MADT) for SMP configuration information[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs[ 0.000000] nr_irqs_gsi: 24[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000[ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf400000)[ 0.000000] NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:8[ 0.000000] PERCPU: Embedded 14 pages at c10da000, static data 34204 bytes[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255867[ 0.000000] Policy zone: HighMem[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-TOSHIBA_MK1655GSX_59JEF1LPS-part5 resume=/dev/sda2 ipv6.disable=1 vga=0x311[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[ 0.000000] Enabling fast FPU save and restore... done.[ 0.000000] Enabling unmasked SIMD FPU exception support... done.[ 0.000000] Initializing CPU#0[ 0.000000] Initializing HighMem for node 0 (00036ffe:0003f7d0)[ 0.000000] Memory: 1007232k/1040192k available (4721k kernel code, 24360k reserved, 2950k data, 464k init, 130888k highmem)[ 0.000000] virtual kernel memory layout:[ 0.000000] fixmap : 0xff5b5000 - 0xfffff000 (10536 kB)[ 0.000000] pkmap : 0xff000000 - 0xff200000 (2048 kB)[ 0.000000] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB)[ 0.000000] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB)[ 0.000000] .init : 0xc097f000 - 0xc09f3000 ( 464 kB)[ 0.000000] .data : 0xc069c636 - 0xc097e0c8 (2950 kB)[ 0.000000] .text : 0xc0200000 - 0xc069c636 (4721 kB)[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.[ 0.000000] Hierarchical RCU implementation.[ 0.000000] NR_IRQS:2304 nr_irqs:424[ 0.000000] Extended CMOS year: 2000[ 0.000000] Fast TSC calibration using PIT[ 0.000000] Detected 1595.901 MHz processor.[ 0.000257] Console: colour dummy device 80x25[ 0.000266] console [tty0] enabled[ 0.000999] hpet clockevent registered[ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.80 BogoMIPS (lpj=1595901)[ 0.003329] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved[ 0.003654] Security Framework initialized[ 0.003700] AppArmor: AppArmor initialized[ 0.003785] Mount-cache hash table entries: 512[ 0.004200] CPU: L1 I cache: 32K, L1 D cache: 24K[ 0.004225] CPU: L2 cache: 512K[ 0.004240] CPU: Physical Processor ID: 0[ 0.004256] CPU: Processor Core ID: 0[ 0.004275] mce: CPU supports 5 MCE banks[ 0.004300] CPU0: Thermal monitoring enabled (TM1)[ 0.004322] using mwait in idle threads.[ 0.004347] Performance Counters: Atom events, Intel PMU driver.[ 0.004377] ... version: 3[ 0.004393] ... bit width: 40[ 0.004410] ... generic counters: 2[ 0.004426] ... value mask: 000000ffffffffff[ 0.004445] ... max period: 000000007fffffff[ 0.004465] ... fixed-purpose counters: 3[ 0.004481] ... counter mask: 0000000700000003[ 0.004508] Checking 'hlt' instruction... OK.[ 0.010140] ACPI: Core revision 20090521[ 0.054129] Mapping cpu 0 to node 0[ 0.054376] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1[ 0.064411] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02[ 0.064990] Booting processor 1 APIC 0x1 ip 0x6000[ 0.000999] Initializing CPU#1[ 0.000999] Mapping cpu 1 to node 0[ 0.000999] Calibrating delay using timer specific routine.. 3191.85 BogoMIPS (lpj=1595929)[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 24K[ 0.000999] CPU: L2 cache: 512K[ 0.000999] CPU: Physical Processor ID: 0[ 0.000999] CPU: Processor Core ID: 0[ 0.000999] mce: CPU supports 5 MCE banks[ 0.000999] CPU1: Thermal monitoring enabled (TM1)[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106[ 0.136000] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02[ 0.136188] checking TSC synchronization [CPU#0 -> CPU#1]: passed.[ 0.137045] Brought up 2 CPUs[ 0.137045] Total of 2 processors activated (6383.66 BogoMIPS).[ 0.137240] CPU0 attaching sched-domain:[ 0.137249] domain 0: span 0-1 level SIBLING[ 0.137258] groups: 0 1[ 0.137273] domain 1: span 0-1 level NODE[ 0.137281] groups: 0-1[ 0.137296] CPU1 attaching sched-domain:[ 0.137303] domain 0: span 0-1 level SIBLING[ 0.137312] groups: 1 0[ 0.137326] domain 1: span 0-1 level NODE[ 0.137334] groups: 0-1[ 0.138153] devtmpfs: initialized[ 0.138542] Booting paravirtualized kernel on bare hardware[ 0.139319] regulator: core version 0.5[ 0.139319] Time: 17:21:18 Date: 06/08/10[ 0.139367] NET: Registered protocol family 16[ 0.140149] ACPI: bus type pci registered[ 0.140357] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63[ 0.140383] PCI: Not using MMCONFIG.[ 0.141731] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32[ 0.141754] PCI: Using configuration type 1 for base access[ 0.145286] bio: create slab <bio-0> at 0[ 0.151327] ACPI: EC: Look up EC in DSDT[ 0.250988] ACPI: EC: non-query interrupt received, switching to interrupt mode[ 0.285337] ACPI: Interpreter enabled[ 0.285365] ACPI: (supports S0 S3 S4 S5)[ 0.285459] ACPI: Using IOAPIC for interrupt routing[ 0.285642] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63[ 0.303375] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources[ 0.303402] PCI: Using MMCONFIG for extended config space[ 0.336427] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62[ 0.336458] ACPI: EC: driver started in interrupt mode[ 0.336718] ACPI: Power Resource [C1D2] (on)[ 0.336892] ACPI: Power Resource [C1D5] (off)[ 0.337272] ACPI: Power Resource [C2DA] (off)[ 0.337629] ACPI: Power Resource [C2DB] (off)[ 0.337988] ACPI: Power Resource [C2DC] (off)[ 0.338338] ACPI: Power Resource [C2DD] (off)[ 0.338689] ACPI: Power Resource [C2DE] (off)[ 0.339943] ACPI: No dock devices found.[ 0.361505] ACPI: PCI Root Bridge [C002] (0000:00)[ 0.361763] pci 0000:00:02.0: reg 10 32bit mmio: [0xe8100000-0xe817ffff][ 0.361779] pci 0000:00:02.0: reg 14 io port: [0x6000-0x6007][ 0.361793] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff][ 0.361807] pci 0000:00:02.0: reg 1c 32bit mmio: [0xe8180000-0xe81bffff][ 0.361886] pci 0000:00:02.1: reg 10 32bit mmio: [0xe8200000-0xe827ffff][ 0.362085] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe8280000-0xe8283fff][ 0.362177] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold[ 0.362204] pci 0000:00:1b.0: PME# disabled[ 0.362343] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold[ 0.362374] pci 0000:00:1c.0: PME# disabled[ 0.362522] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold[ 0.362548] pci 0000:00:1c.2: PME# disabled[ 0.362689] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold[ 0.362715] pci 0000:00:1c.3: PME# disabled[ 0.362828] pci 0000:00:1d.0: reg 20 io port: [0x6020-0x603f][ 0.362926] pci 0000:00:1d.1: reg 20 io port: [0x6040-0x605f][ 0.363041] pci 0000:00:1d.2: reg 20 io port: [0x6060-0x607f][ 0.363140] pci 0000:00:1d.3: reg 20 io port: [0x6080-0x609f][ 0.363247] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe8284000-0xe82843ff][ 0.363338] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold[ 0.363370] pci 0000:00:1d.7: PME# disabled[ 0.363618] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO[ 0.363651] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO[ 0.363678] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)[ 0.363713] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)[ 0.363810] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07][ 0.363827] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03][ 0.363843] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07][ 0.363859] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03][ 0.363875] pci 0000:00:1f.1: reg 20 io port: [0x60a0-0x60af][ 0.363976] pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7][ 0.363993] pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7][ 0.364016] pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377][ 0.364033] pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577][ 0.364049] pci 0000:00:1f.2: reg 20 io port: [0x60d0-0x60df][ 0.364066] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe8285000-0xe82853ff][ 0.364123] pci 0000:00:1f.2: PME# supported from D3hot[ 0.364147] pci 0000:00:1f.2: PME# disabled[ 0.364332] pci 0000:08:00.0: reg 10 64bit mmio: [0xe8000000-0xe8003fff][ 0.364512] pci 0000:08:00.0: supports D1 D2[ 0.366225] pci 0000:00:1c.0: bridge 32bit mmio: [0xe8000000-0xe80fffff][ 0.366329] pci 0000:00:1c.2: bridge io port: [0x4000-0x5fff][ 0.366341] pci 0000:00:1c.2: bridge 32bit mmio: [0xe4000000-0xe7ffffff][ 0.366798] pci 0000:20:00.0: reg 10 64bit mmio: [0xe0000000-0xe0003fff][ 0.366851] pci 0000:20:00.0: reg 18 io port: [0x2000-0x20ff][ 0.367050] pci 0000:20:00.0: reg 30 32bit mmio: [0x000000-0x01ffff][ 0.367336] pci 0000:20:00.0: supports D1 D2[ 0.367344] pci 0000:20:00.0: PME# supported from D0 D1 D2 D3hot D3cold[ 0.367395] pci 0000:20:00.0: PME# disabled[ 0.369431] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff][ 0.369444] pci 0000:00:1c.3: bridge 32bit mmio: [0xe0000000-0xe3ffffff][ 0.369554] pci 0000:00:1e.0: transparent bridge[ 0.369635] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT][ 0.370438] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C096._PRT][ 0.370827] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C102._PRT][ 0.371164] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C115._PRT][ 0.371671] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C118._PRT][ 0.491466] ACPI: PCI Interrupt Link [C10E] (IRQs *10 11)[ 0.492235] ACPI: PCI Interrupt Link [C10F] (IRQs *10 11)[ 0.492986] ACPI: PCI Interrupt Link [C110] (IRQs 10 *11)[ 0.493737] ACPI: PCI Interrupt Link [C111] (IRQs *10 11)[ 0.494509] ACPI: PCI Interrupt Link [C12A] (IRQs *10 11)[ 0.495268] ACPI: PCI Interrupt Link [C12B] (IRQs 10 *11)[ 0.495973] ACPI: PCI Interrupt Link [C12C] (IRQs 10 11) *0, disabled.[ 0.496337] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS 20090521 pci_link-182[ 0.497264] SCSI subsystem initialized[ 0.499030] libata version 3.00 loaded.[ 0.499149] usbcore: registered new interface driver usbfs[ 0.499176] usbcore: registered new interface driver hub[ 0.499221] usbcore: registered new device driver usb[ 0.499221] PCI: Using ACPI for IRQ routing[ 0.504045] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0[ 0.504080] hpet0: 3 comparators, 64-bit 14.318180 MHz counter[ 0.508028] Switched to high resolution mode on CPU 0[ 0.508370] Switched to high resolution mode on CPU 1[ 0.511348] AppArmor: AppArmor Filesystem Enabled[ 0.514041] pnp: PnP ACPI init[ 0.514094] ACPI: bus type pnp registered[ 0.545670] alloc irq_desc for 23 on node 0[ 0.545680] alloc kstat_irqs on node 0[ 0.552817] pnp: PnP ACPI: found 13 devices[ 0.552840] ACPI: ACPI bus type pnp unregistered[ 0.552886] system 00:00: iomem range 0x0-0x9ffff could not be reserved[ 0.552913] system 00:00: iomem range 0xe0000-0xfffff could not be reserved[ 0.552940] system 00:00: iomem range 0x100000-0x3f7fffff could not be reserved[ 0.552991] system 00:09: ioport range 0x500-0x57f has been reserved[ 0.553034] system 00:09: ioport range 0x800-0x80f has been reserved[ 0.553061] system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved[ 0.553089] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved[ 0.553128] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved[ 0.553154] system 00:0b: ioport range 0x1000-0x107f has been reserved[ 0.553179] system 00:0b: ioport range 0x1100-0x113f has been reserved[ 0.553205] system 00:0b: ioport range 0x1200-0x121f has been reserved[ 0.553230] system 00:0b: iomem range 0xf8000000-0xfbffffff has been reserved[ 0.553263] system 00:0b: iomem range 0xfec00000-0xfec000ff could not be reserved[ 0.553297] system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved[ 0.553324] system 00:0b: iomem range 0xfed45000-0xfed8ffff has been reserved[ 0.553351] system 00:0b: iomem range 0xfed90000-0xfed9afff has been reserved[ 0.553389] system 00:0c: iomem range 0xcec00-0xcffff has been reserved[ 0.553415] system 00:0c: iomem range 0xd2000-0xd3fff has been reserved[ 0.553441] system 00:0c: iomem range 0xfeda0000-0xfedbffff has been reserved[ 0.553468] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved[ 0.590702] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08[ 0.590728] pci 0000:00:1c.0: IO window: disabled[ 0.590754] pci 0000:00:1c.0: MEM window: 0xe8000000-0xe80fffff[ 0.590779] pci 0000:00:1c.0: PREFETCH window: disabled[ 0.590804] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:18[ 0.590827] pci 0000:00:1c.2: IO window: 0x4000-0x5fff[ 0.590853] pci 0000:00:1c.2: MEM window: 0xe4000000-0xe7ffffff[ 0.590878] pci 0000:00:1c.2: PREFETCH window: disabled[ 0.590906] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:20[ 0.590929] pci 0000:00:1c.3: IO window: 0x2000-0x2fff[ 0.590955] pci 0000:00:1c.3: MEM window: 0xe0000000-0xe3ffffff[ 0.590982] pci 0000:00:1c.3: PREFETCH window: 0x40000000-0x400fffff[ 0.591022] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02[ 0.591043] pci 0000:00:1e.0: IO window: disabled[ 0.591067] pci 0000:00:1e.0: MEM window: disabled[ 0.591089] pci 0000:00:1e.0: PREFETCH window: disabled[ 0.591132] alloc irq_desc for 16 on node 0[ 0.591139] alloc kstat_irqs on node 0[ 0.591159] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 0.591188] pci 0000:00:1c.0: setting latency timer to 64[ 0.591208] alloc irq_desc for 18 on node 0[ 0.591215] alloc kstat_irqs on node 0[ 0.591227] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18[ 0.591257] pci 0000:00:1c.2: setting latency timer to 64[ 0.591282] alloc irq_desc for 19 on node 0[ 0.591289] alloc kstat_irqs on node 0[ 0.591302] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19[ 0.591330] pci 0000:00:1c.3: setting latency timer to 64[ 0.591349] pci 0000:00:1e.0: setting latency timer to 64[ 0.591362] pci_bus 0000:00: resource 0 io: [0x00-0xffff][ 0.591371] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff][ 0.591382] pci_bus 0000:08: resource 1 mem: [0xe8000000-0xe80fffff][ 0.591392] pci_bus 0000:18: resource 0 io: [0x4000-0x5fff][ 0.591401] pci_bus 0000:18: resource 1 mem: [0xe4000000-0xe7ffffff][ 0.591410] pci_bus 0000:20: resource 0 io: [0x2000-0x2fff][ 0.591420] pci_bus 0000:20: resource 1 mem: [0xe0000000-0xe3ffffff][ 0.591429] pci_bus 0000:20: resource 2 pref mem [0x40000000-0x400fffff][ 0.591439] pci_bus 0000:02: resource 3 io: [0x00-0xffff][ 0.591448] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff][ 0.591690] NET: Registered protocol family 2[ 0.592070] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)[ 0.593260] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)[ 0.594315] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)[ 0.594780] TCP: Hash tables configured (established 131072 bind 65536)[ 0.594807] TCP reno registered[ 0.595282] NET: Registered protocol family 1[ 0.595487] Unpacking initramfs...[ 0.883114] Freeing initrd memory: 5997k freed[ 0.890245] Scanning for low memory corruption every 60 seconds[ 0.890742] audit: initializing netlink socket (disabled)[ 0.890801] type=2000 audit(1276017678.890:1): initialized[ 0.898376] highmem bounce pool size: 64 pages[ 0.898410] HugeTLB registered 2 MB page size, pre-allocated 0 pages[ 0.900049] VFS: Disk quotas dquot_6.5.2[ 0.900208] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)[ 0.900727] msgmni has been set to 430[ 0.901103] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)[ 0.901135] io scheduler noop registered[ 0.901152] io scheduler anticipatory registered[ 0.901170] io scheduler deadline registered[ 0.901252] io scheduler cfq registered (default)[ 0.901519] pci 0000:00:02.0: Boot video device[ 0.902131] alloc irq_desc for 24 on node 0[ 0.902139] alloc kstat_irqs on node 0[ 0.902165] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X[ 0.902186] pcieport-driver 0000:00:1c.0: setting latency timer to 64[ 0.902574] alloc irq_desc for 25 on node 0[ 0.902582] alloc kstat_irqs on node 0[ 0.902603] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X[ 0.902624] pcieport-driver 0000:00:1c.2: setting latency timer to 64[ 0.902982] alloc irq_desc for 26 on node 0[ 0.902989] alloc kstat_irqs on node 0[ 0.903027] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X[ 0.903048] pcieport-driver 0000:00:1c.3: setting latency timer to 64[ 0.903356] pci-stub: invalid id string ""[ 0.903621] vesafb: framebuffer at 0xd0000000, mapped to 0xf7880000, using 1200k, total 7872k[ 0.903654] vesafb: mode is 640x480x16, linelength=1280, pages=11[ 0.903674] vesafb: scrolling: redraw[ 0.903693] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0[ 0.903982] bootsplash 3.1.6-2004/03/31: looking for picture...[ 0.918301] bootsplash: silentjpeg size 48680 bytes[ 0.918335] bootsplash: ...found (640x480, 19740 bytes, v3).[ 0.943806] Console: switching to colour frame buffer device 76x26[ 0.968921] fb0: VESA VGA frame buffer device[ 0.980749] Non-volatile memory driver v1.3[ 0.987094] Linux agpgart interface v0.103[ 0.993225] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled[ 1.001049] ahci 0000:00:1f.2: version 3.0[ 1.001086] alloc irq_desc for 17 on node 0[ 1.001094] alloc kstat_irqs on node 0[ 1.001111] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17[ 1.007709] alloc irq_desc for 27 on node 0[ 1.007717] alloc kstat_irqs on node 0[ 1.007744] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X[ 1.007812] ahci: SSS flag set, parallel bus scan disabled[ 1.014230] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode[ 1.026562] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 1.039027] ahci 0000:00:1f.2: setting latency timer to 64[ 1.039307] scsi0 : ahci[ 1.045832] scsi1 : ahci[ 1.052117] scsi2 : ahci[ 1.058280] scsi3 : ahci[ 1.064441] ata1: SATA max UDMA/133 abar m1024@0xe8285000 port 0xe8285100 irq 27[ 1.076418] ata2: DUMMY[ 1.082189] ata3: DUMMY[ 1.087673] ata4: DUMMY[ 1.093255] ata_piix 0000:00:1f.1: version 2.13[ 1.093296] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 1.104386] ata_piix 0000:00:1f.1: setting latency timer to 64[ 1.104536] scsi4 : ata_piix[ 1.110249] scsi5 : ata_piix[ 1.117262] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14[ 1.127862] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15[ 1.138832] Fixed MDIO Bus: probed[ 1.144466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 1.147081] ata6: port disabled. ignoring.[ 1.151303] alloc irq_desc for 20 on node 0[ 1.151314] alloc kstat_irqs on node 0[ 1.151333] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20[ 1.162252] ehci_hcd 0000:00:1d.7: setting latency timer to 64[ 1.162269] ehci_hcd 0000:00:1d.7: EHCI Host Controller[ 1.167855] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1[ 1.178395] ehci_hcd 0000:00:1d.7: using broken periodic workaround[ 1.187766] ehci_hcd 0000:00:1d.7: debug port 1[ 1.193179] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported[ 1.193226] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8284000[ 1.208036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00[ 1.213779] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002[ 1.219810] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.231118] usb usb1: Product: EHCI Host Controller[ 1.236998] usb usb1: Manufacturer: Linux 2.6.31.12-0.2-desktop ehci_hcd[ 1.243192] usb usb1: SerialNumber: 0000:00:1d.7[ 1.249753] usb usb1: configuration #1 chosen from 1 choice[ 1.256300] hub 1-0:1.0: USB hub found[ 1.262536] hub 1-0:1.0: 8 ports detected[ 1.268982] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[ 1.275641] uhci_hcd: USB Universal Host Controller Interface driver[ 1.283299] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20[ 1.295985] uhci_hcd 0000:00:1d.0: setting latency timer to 64[ 1.295998] uhci_hcd 0000:00:1d.0: UHCI Host Controller[ 1.302426] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2[ 1.315034] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006020[ 1.321627] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001[ 1.328200] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.340794] usb usb2: Product: UHCI Host Controller[ 1.347183] usb usb2: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd[ 1.353616] usb usb2: SerialNumber: 0000:00:1d.0[ 1.360301] usb usb2: configuration #1 chosen from 1 choice[ 1.367085] hub 2-0:1.0: USB hub found[ 1.373789] hub 2-0:1.0: 2 ports detected[ 1.380453] alloc irq_desc for 21 on node 0[ 1.380462] alloc kstat_irqs on node 0[ 1.380481] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21[ 1.393225] uhci_hcd 0000:00:1d.1: setting latency timer to 64[ 1.393237] uhci_hcd 0000:00:1d.1: UHCI Host Controller[ 1.399792] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3[ 1.412510] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006040[ 1.419298] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001[ 1.426096] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.439299] usb usb3: Product: UHCI Host Controller[ 1.446028] usb usb3: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd[ 1.452843] usb usb3: SerialNumber: 0000:00:1d.1[ 1.459769] usb usb3: configuration #1 chosen from 1 choice[ 1.466665] hub 3-0:1.0: USB hub found[ 1.473425] hub 3-0:1.0: 2 ports detected[ 1.480231] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18[ 1.492981] uhci_hcd 0000:00:1d.2: setting latency timer to 64[ 1.492993] uhci_hcd 0000:00:1d.2: UHCI Host Controller[ 1.499536] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4[ 1.512173] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006060[ 1.518829] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001[ 1.525856] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.538759] usb usb4: Product: UHCI Host Controller[ 1.545550] usb usb4: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd[ 1.552370] usb usb4: SerialNumber: 0000:00:1d.2[ 1.559283] usb usb4: configuration #1 chosen from 1 choice[ 1.566155] hub 4-0:1.0: USB hub found[ 1.572863] hub 4-0:1.0: 2 ports detected[ 1.579359] usb 1-4: new high speed USB device using ehci_hcd and address 2[ 1.592029] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[ 1.601328] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19[ 1.607000] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[ 1.607014] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[ 1.628462] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[ 1.628479] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[ 1.628510] uhci_hcd 0000:00:1d.3: setting latency timer to 64[ 1.628523] uhci_hcd 0000:00:1d.3: UHCI Host Controller[ 1.628577] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5[ 1.628668] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006080[ 1.628796] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001[ 1.628807] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.628818] usb usb5: Product: UHCI Host Controller[ 1.628826] usb usb5: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd[ 1.628835] usb usb5: SerialNumber: 0000:00:1d.3[ 1.629192] usb usb5: configuration #1 chosen from 1 choice[ 1.629306] hub 5-0:1.0: USB hub found[ 1.629331] hub 5-0:1.0: 2 ports detected[ 1.632115] Initializing USB Mass Storage driver...[ 1.632313] usbcore: registered new interface driver usb-storage[ 1.632325] USB Mass Storage support registered.[ 1.632501] usbcore: registered new interface driver libusual[ 1.632553] usbcore: registered new interface driver ums-alauda[ 1.632606] usbcore: registered new interface driver ums-cypress[ 1.632662] usbcore: registered new interface driver ums-datafab[ 1.632715] usbcore: registered new interface driver ums-freecom[ 1.632770] usbcore: registered new interface driver ums-isd200[ 1.632823] usbcore: registered new interface driver ums-jumpshot[ 1.632875] usbcore: registered new interface driver ums-karma[ 1.632930] usbcore: registered new interface driver ums-onetouch[ 1.632985] usbcore: registered new interface driver ums-sddr09[ 1.633064] usbcore: registered new interface driver ums-sddr55[ 1.633119] usbcore: registered new interface driver ums-usbat[ 1.633282] PNP: PS/2 Controller [PNP0303:C1CF,PNP0f12:C1D0] at 0x60,0x64 irq 1,12[ 1.635340] i8042.c: Detected active multiplexing controller, rev 1.1.[ 1.636113] serio: i8042 KBD port at 0x60,0x64 irq 1[ 1.636135] serio: i8042 AUX0 port at 0x60,0x64 irq 12[ 1.636148] serio: i8042 AUX1 port at 0x60,0x64 irq 12[ 1.636160] serio: i8042 AUX2 port at 0x60,0x64 irq 12[ 1.636173] serio: i8042 AUX3 port at 0x60,0x64 irq 12[ 1.636452] mice: PS/2 mouse device common for all mice[ 1.638241] rtc_cmos 00:05: RTC can wake from S4[ 1.638419] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0[ 1.638481] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs[ 1.638530] cpuidle: using governor ladder[ 1.638538] cpuidle: using governor menu[ 1.639795] usbcore: registered new interface driver hiddev[ 1.639881] usbcore: registered new interface driver usbhid[ 1.639893] usbhid: v2.6:USB HID core driver[ 1.904632] ata1.00: ATA-8: TOSHIBA MK1655GSX, FG011C, max UDMA/100[ 1.905505] TCP cubic registered[ 1.905513] IPv6: Loaded, but administratively disabled, reboot required to enable[ 1.905584] lib80211: common routines for IEEE802.11 drivers[ 1.905594] lib80211_crypt: registered algorithm 'NULL'[ 1.905639] Using IPI No-Shortcut mode[ 1.905968] PM: Checking image partition /dev/sda2[ 1.916805] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0[ 1.944898] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)[ 1.958580] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[ 1.964642] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[ 1.970350] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[ 1.970363] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[ 1.976264] ata1.00: configured for UDMA/100[ 1.992981] ata1.00: configured for UDMA/100[ 1.998473] ata1: EH complete[ 2.014291] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1655GS FG01 PQ: 0 ANSI: 5[ 2.018899] usb 1-4: New USB device found, idVendor=04f2, idProduct=b12e[ 2.018910] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3[ 2.018921] usb 1-4: Product: CNF8031[ 2.018928] usb 1-4: Manufacturer: Chicony Electronics Co., Ltd.[ 2.018937] usb 1-4: SerialNumber: SN0001[ 2.019274] usb 1-4: configuration #1 chosen from 1 choice[ 2.068117] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)[ 2.080696] sd 0:0:0:0: [sda] Write Protect is off[ 2.086961] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[ 2.087101] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[ 2.099686] sda: sda1 sda2 sda3 < sda5 sda6 >[ 2.220054] usb 1-6: new high speed USB device using ehci_hcd and address 4[ 2.233212] sd 0:0:0:0: [sda] Attached SCSI disk[ 2.347545] usb 1-6: New USB device found, idVendor=058f, idProduct=6366[ 2.353703] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 2.365547] usb 1-6: Product: Mass Storage Device[ 2.371854] usb 1-6: Manufacturer: Generic[ 2.378064] usb 1-6: SerialNumber: 058F63666430[ 2.384637] usb 1-6: configuration #1 chosen from 1 choice[ 2.391744] scsi6 : SCSI emulation for USB Mass Storage devices[ 2.398717] usb-storage: device found at 4[ 2.398727] usb-storage: waiting for device to settle before scanning[ 2.599121] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000[ 2.611929] usb 4-1: new full speed USB device using uhci_hcd and address 2[ 2.661453] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1[ 2.686073] PM: Resume from partition 8:2[ 2.686081] PM: Checking hibernation image.[ 2.686301] PM: Resume from disk failed.[ 2.686347] registered taskstats version 1[ 2.693635] Magic number: 14:226:390[ 2.700626] rtc_cmos 00:05: setting system clock to 2010-06-08 17:21:21 UTC (1276017681)[ 2.714473] Freeing unused kernel memory: 464k freed[ 2.721800] Write protecting the kernel text: 4724k[ 2.729196] Write protecting the kernel read-only data: 2708k[ 2.793926] usb 4-1: New USB device found, idVendor=03f0, idProduct=171d[ 2.802676] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0[ 2.819665] usb 4-1: Product: HP Integrated Module[ 2.828164] usb 4-1: Manufacturer: Broadcom Corp[ 2.836964] usb 4-1: configuration #1 chosen from 1 choice[ 3.003551] thermal LNXTHERM:01: registered as thermal_zone0[ 3.011697] ACPI: Thermal Zone [TZ0] (35 C)[ 3.070712] thermal LNXTHERM:02: registered as thermal_zone1[ 3.079128] ACPI: Thermal Zone [TZ1] (35 C)[ 3.117934] thermal LNXTHERM:03: registered as thermal_zone2[ 3.124947] ACPI: Thermal Zone [TZ2] (29 C)[ 3.149387] thermal LNXTHERM:04: registered as thermal_zone3[ 3.156273] ACPI: Thermal Zone [TZ3] (30 C)[ 3.172065] thermal LNXTHERM:05: registered as thermal_zone4[ 3.178811] ACPI: Thermal Zone [TZ4] (40 C)[ 3.295600] Uniform Multi-Platform E-IDE driver[ 3.337673] ACPI: SSDT 3f7f500e 0024A (v01 HP Cpu0Ist 00003000 INTL 20050624)[ 3.352584] ACPI: SSDT 3f7f52dd 00663 (v01 HP Cpu0Cst 00003001 INTL 20050624)[ 3.374770] Monitor-Mwait will be used to enter C-1 state[ 3.374867] Monitor-Mwait will be used to enter C-2 state[ 3.374948] Monitor-Mwait will be used to enter C-3 state[ 3.374977] Marking TSC unstable due to TSC halts in idle[ 3.381782] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])[ 3.388443] processor LNXCPU:00: registered as cooling_device0[ 3.394989] ACPI: Processor [CPU0] (supports 8 throttling states)[ 3.403060] scsi 6:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0[ 3.403152] ACPI: SSDT 3f7f4f3a 000D4 (v01 HP Cpu1Ist 00003000 INTL 20050624)[ 3.405534] ACPI: SSDT 3f7f5258 00085 (v01 HP Cpu1Cst 00003000 INTL 20050624)[ 3.446282] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])[ 3.453655] processor LNXCPU:01: registered as cooling_device1[ 3.460817] ACPI: Processor [CPU1] (supports 8 throttling states)[ 3.784600] usb-storage: device scan complete[ 3.789345] sd 6:0:0:0: [sdb] Attached SCSI removable disk[ 3.805388] fan PNP0C0B:00: registered as cooling_device2[ 3.812561] ACPI: Fan [C2DF] (off)[ 3.820229] fan PNP0C0B:01: registered as cooling_device3[ 3.827350] ACPI: Fan [C2E0] (off)[ 3.835005] fan PNP0C0B:02: registered as cooling_device4[ 3.842303] ACPI: Fan [C2E1] (off)[ 3.850158] fan PNP0C0B:03: registered as cooling_device5[ 3.857472] ACPI: Fan [C2E2] (off)[ 3.865248] fan PNP0C0B:04: registered as cooling_device6[ 3.872430] ACPI: Fan [C2E3] (off)[ 3.901068] udev: starting version 146[ 4.591587] PM: Marking nosave pages: 0000000000002000 - 0000000000006000[ 4.591600] PM: Marking nosave pages: 000000000009f000 - 0000000000100000[ 4.591614] PM: Basic memory bitmaps created[ 4.628785] PM: Basic memory bitmaps freed[ 4.650958] PM: Starting manual resume from disk[ 4.657434] PM: Resume from partition 8:2[ 4.657442] PM: Checking hibernation image.[ 4.665767] PM: Resume from disk failed.[ 4.818105] REISERFS (device sda5): found reiserfs format "3.6" with standard journal[ 4.818143] REISERFS (device sda5): using ordered data mode[ 4.818150] reiserfs: using flush barriers[ 4.818554] REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30[ 4.819465] REISERFS (device sda5): checking transaction log (sda5)[ 4.922498] REISERFS (device sda5): Using r5 hash to sort names[ 7.461801] preloadtrace: systemtap: 1.0/0.142, base: f7c75000, memory: 34340+77400+13136+13600 data+text+ctx+net, probes: 34[ 9.723566] udev: starting version 146[ 10.074789] sky2 driver version 1.23[ 10.087239] wl: module license 'unspecified' taints kernel.[ 10.087250] Disabling lock debugging due to kernel taint[ 10.110172] wl 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 10.118596] wl 0000:08:00.0: setting latency timer to 64[ 10.137237] ACPI: AC Adapter [C1BE] (off-line)[ 10.166614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2[ 10.183501] ACPI: Power Button [PWRF][ 10.199235] ACPI: WMI: Mapper loaded[ 10.230583] acpi device:03: registered as cooling_device7[ 10.241143] intel_rng: FWH not detected[ 10.261778] agpgart-intel 0000:00:00.0: Intel 945GME Chipset[ 10.270208] agpgart-intel 0000:00:00.0: detected 7932K stolen memory[ 10.303991] input: PC Speaker as /devices/platform/pcspkr/input/input3[ 10.313013] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input4[ 10.387435] sd 0:0:0:0: Attached scsi generic sg0 type 0[ 10.397197] ACPI: Battery Slot [C1C0] (battery present)[ 10.404806] ACPI: Video Device [C083] (multi-head: yes rom: no post: no)[ 10.411600] sd 6:0:0:0: Attached scsi generic sg1 type 0[ 10.430246] sky2 0000:20:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19[ 10.439884] sky2 0000:20:00.0: setting latency timer to 64[ 10.440699] sky2 0000:20:00.0: Yukon-2 Extreme chip revision 2[ 10.450334] alloc irq_desc for 28 on node 0[ 10.450347] alloc kstat_irqs on node 0[ 10.450446] sky2 0000:20:00.0: irq 28 for MSI/MSI-X[ 10.452206] sky2 eth1: addr 00:25:b3:48:61:66[ 10.464303] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000[ 10.473501] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5[ 10.490773] ACPI: Sleep Button [C1F5][ 10.499568] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6[ 10.516791] ACPI: Lid Switch [C1C4][ 10.520037] iTCO_vendor_support: vendor-support=0[ 10.575380] lib80211_crypt: registered algorithm 'TKIP'[ 10.608684] Bluetooth: Core ver 2.15[ 10.617452] NET: Registered protocol family 31[ 10.626360] Bluetooth: HCI device and connection manager initialized[ 10.628878] Linux video capture interface: v2.00[ 10.641412] Bluetooth: HCI socket layer initialized[ 10.648127] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05[ 10.648407] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)[ 10.648575] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)[ 10.722300] Bluetooth: Generic Bluetooth USB driver ver 0.5[ 10.734216] usbcore: registered new interface driver btusb[ 10.743869] eth1 renamed to eth1_rename by udevd [376][ 10.771396] lis3lv02d: hardware type HP2140 found.[ 10.783409] lis3lv02d: 1-byte sensor found[ 10.859543] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7[ 10.880780] Registered led device: hp::hddprotect[ 10.892287] lis3lv02d driver loaded.[ 10.901177] eth0: Broadcom BCM432b 802.11 Hybrid Wireless Controller 5.60.48.36 [ 10.927931] uvcvideo: Found UVC 1.00 device CNF8031 (04f2:b12e)[ 10.955067] input: CNF8031 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input8[ 10.964639] eth0 renamed to eth1 by udevd [377][ 10.965805] udev: renamed network interface eth0 to eth1[ 10.989526] eth1_rename renamed to eth0 by udevd [376][ 11.000163] udev: renamed network interface eth1_rename to eth0[ 11.011978] usbcore: registered new interface driver uvcvideo[ 11.038384] USB Video Class driver (v0.1.0)[ 11.148277] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0[ 11.157290] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21[ 11.174040] HDA Intel 0000:00:1b.0: setting latency timer to 64[ 11.628418] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9[ 11.893759] Adding 1076344k swap on /dev/sda2. Priority:-1 extents:1 across:1076344k [ 12.601823] device-mapper: uevent: version 1.0.3[ 12.609291] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com[ 12.886807] loop: module loaded[ 12.952711] kjournald starting. Commit interval 15 seconds[ 12.953380] EXT3 FS on sda1, internal journal[ 12.953396] EXT3-fs: mounted filesystem with ordered data mode.[ 13.018802] kjournald starting. Commit interval 15 seconds[ 13.019924] EXT3 FS on sda6, internal journal[ 13.019939] EXT3-fs: mounted filesystem with ordered data mode.[ 13.762629] fuse init (API version 7.12)[ 15.936339] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x208[ 15.936375] platform microcode: firmware: requesting intel-ucode/06-1c-02[ 15.954673] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x208[ 15.954710] platform microcode: firmware: requesting intel-ucode/06-1c-02[ 15.981347] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba[ 16.126013] microcode: CPU0 updated to revision 0x20a, date = 2008-06-04 [ 16.137458] microcode: CPU1 updated to revision 0x20a, date = 2008-06-04 [ 19.089091] powernow: This module only works with AMD K7 CPUs[ 20.345505] [drm] Initialized drm 1.1.0 20060810[ 20.421489] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 20.421532] pci 0000:00:02.0: setting latency timer to 64[ 20.438125] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0[ 21.957969] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found[ 22.690436] Bluetooth: L2CAP ver 2.13[ 22.690459] Bluetooth: L2CAP socket layer initialized[ 22.891444] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[ 22.891479] Bluetooth: BNEP filters: protocol multicast[ 23.144953] Bridge firewalling registered[ 23.264293] Bluetooth: SCO (Voice Link) ver 0.6[ 23.264325] Bluetooth: SCO socket layer initialized[ 23.580723] Bluetooth: RFCOMM TTY layer initialized[ 23.580767] Bluetooth: RFCOMM socket layer initialized[ 23.580796] Bluetooth: RFCOMM ver 1.11[ 27.500086] Clocksource tsc unstable (delta = -71766271 ns)[ 299.378749] NET: Registered protocol family 17[ 397.000096] CE: hpet increasing min_delta_ns to 15000 nsec[ 2389.801539] npviewer.bin[5632]: segfault at ff999ea8 ip ff999ea8 sp bfe5954c error 14[ 3126.942355] PM: Syncing filesystems ... done.[ 3127.132512] PM: Preparing system for mem sleep[ 3127.133519] Freezing user space processes ... (elapsed 0.00 seconds) done.[ 3127.135959] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[ 3127.136108] PM: Entering mem sleep[ 3127.136139] Suspending console(s) (use no_console_suspend to debug)[ 3127.136871] pci 0000:00:02.0: PCI INT A disabled[ 3127.149369] btusb_bulk_complete: hci0 urb f443e440 failed to resubmit (1)[ 3127.150373] btusb_bulk_complete: hci0 urb f48d8e40 failed to resubmit (1)[ 3127.151375] btusb_intr_complete: hci0 urb f48d8c40 failed to resubmit (1)[ 3127.174219] sd 0:0:0:0: [sda] Synchronizing SCSI cache[ 3127.221346] sd 0:0:0:0: [sda] Stopping disk[ 3128.236211] ACPI handle has no context![ 3128.237191] sky2 0000:20:00.0: PME# disabled[ 3128.248375] wl 0000:08:00.0: PCI INT A disabled[ 3128.281363] ata6: port disabled. ignoring.[ 3128.281462] ata_piix 0000:00:1f.1: PCI INT A disabled[ 3128.281489] ehci_hcd 0000:00:1d.7: PCI INT A disabled[ 3128.281507] uhci_hcd 0000:00:1d.3: PCI INT D disabled[ 3128.281522] uhci_hcd 0000:00:1d.2: PCI INT C disabled[ 3128.281538] uhci_hcd 0000:00:1d.1: PCI INT B disabled[ 3128.281554] uhci_hcd 0000:00:1d.0: PCI INT A disabled[ 3128.281593] HDA Intel 0000:00:1b.0: PCI INT A disabled[ 3128.302500] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3[ 3128.328163] ehci_hcd 0000:00:1d.7: PME# disabled[ 3128.339607] ACPI: Preparing to enter system sleep state S3[ 3128.340477] Disabling non-boot CPUs ...[ 3128.341673] Unmapping cpu 1 from all nodes[ 3128.343093] CPU 1 is now offline[ 3128.343102] SMP alternatives: switching to UP code[ 3128.351790] CPU0 attaching NULL sched-domain.[ 3128.351800] CPU1 attaching NULL sched-domain.[ 3128.351898] CPU0 attaching NULL sched-domain.[ 3128.352786] CPU1 is down[ 3128.352876] Extended CMOS year: 2000[ 3128.352876] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106[ 3128.352876] Back to C![ 3128.352876] microcode: CPU0 updated to revision 0x20a, date = 2008-06-04 [ 3128.352876] CPU0: Thermal monitoring enabled (TM1)[ 3128.352876] Extended CMOS year: 2000[ 3128.352876] Enabling non-boot CPUs ...[ 3128.355407] SMP alternatives: switching to SMP code[ 3128.363035] Booting processor 1 APIC 0x1 ip 0x6000[ 3128.351135] Initializing CPU#1[ 3128.351135] Mapping cpu 1 to node 0[ 3128.351135] Calibrating delay using timer specific routine.. 3192.00 BogoMIPS (lpj=1596004)[ 3128.351135] CPU: L1 I cache: 32K, L1 D cache: 24K[ 3128.351135] CPU: L2 cache: 512K[ 3128.351135] CPU: Physical Processor ID: 0[ 3128.351135] CPU: Processor Core ID: 0[ 3128.351135] mce: CPU supports 5 MCE banks[ 3128.351135] CPU1: Thermal monitoring enabled (TM1)[ 3128.351135] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106[ 3128.435129] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02[ 3128.435230] CPU0 attaching NULL sched-domain.[ 3128.436277] Switched to high resolution mode on CPU 1[ 3128.438206] CPU0 attaching sched-domain:[ 3128.438217] domain 0: span 0-1 level SIBLING[ 3128.438228] groups: 0 1[ 3128.438246] domain 1: span 0-1 level NODE[ 3128.438256] groups: 0-1[ 3128.438273] CPU1 attaching sched-domain:[ 3128.438283] domain 0: span 0-1 level SIBLING[ 3128.438293] groups: 1 0[ 3128.438310] domain 1: span 0-1 level NODE[ 3128.438320] groups: 0-1[ 3128.440784] microcode: CPU1 updated to revision 0x20a, date = 2008-06-04 [ 3128.446308] CPU1 is up[ 3128.446318] ACPI: Waking up from system sleep state S3[ 3128.657122] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[ 3128.657195] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xe8200000)[ 3128.657216] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)[ 3128.657287] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[ 3128.657331] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[ 3128.657352] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)[ 3128.657417] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)[ 3128.657448] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[ 3128.657471] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0)[ 3128.657497] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[ 3128.657519] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[ 3128.657611] pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x4030b)[ 3128.657641] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[ 3128.657662] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xe7f0e400)[ 3128.657681] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x5040)[ 3128.657709] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[ 3128.657731] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[ 3128.657820] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x4040a)[ 3128.657851] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0x40014001)[ 3128.657872] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xe3f0e000)[ 3128.657891] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020)[ 3128.657917] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[ 3128.657939] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[ 3128.658014] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[ 3128.658046] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x6021)[ 3128.658081] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[ 3128.658309] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)[ 3128.658343] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x6041)[ 3128.658376] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[ 3128.658411] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)[ 3128.658445] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x6061)[ 3128.658477] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[ 3128.658650] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40a)[ 3128.658684] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x6081)[ 3128.658716] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[ 3128.658761] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a)[ 3128.658802] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xe8284000)[ 3128.658825] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)[ 3128.658865] ehci_hcd 0000:00:1d.7: PME# disabled[ 3128.658905] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[ 3128.658923] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)[ 3128.658954] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)[ 3128.659060] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)[ 3128.659092] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x60a1)[ 3128.659161] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xe8285000)[ 3128.659180] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x60d1)[ 3128.659212] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)[ 3128.659354] wl 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)[ 3128.659416] wl 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe8000004)[ 3128.659437] wl 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[ 3128.659463] wl 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)[ 3128.659809] sky2 0000:20:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[ 3128.659950] sky2 0000:20:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001)[ 3128.660008] sky2 0000:20:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe0000004)[ 3128.660059] sky2 0000:20:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[ 3128.660117] sky2 0000:20:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[ 3128.958341] pci 0000:00:02.0: PME# disabled[ 3128.958359] pci 0000:00:02.1: PME# disabled[ 3128.958383] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21[ 3128.958405] HDA Intel 0000:00:1b.0: setting latency timer to 64[ 3128.958469] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20[ 3128.958484] uhci_hcd 0000:00:1d.0: setting latency timer to 64[ 3128.958518] usb usb2: root hub lost power or was reset[ 3128.958550] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21[ 3128.958564] uhci_hcd 0000:00:1d.1: setting latency timer to 64[ 3128.958597] usb usb3: root hub lost power or was reset[ 3128.958627] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18[ 3128.958641] uhci_hcd 0000:00:1d.2: setting latency timer to 64[ 3128.958674] usb usb4: root hub lost power or was reset[ 3128.958723] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19[ 3128.958737] uhci_hcd 0000:00:1d.3: setting latency timer to 64[ 3128.958770] usb usb5: root hub lost power or was reset[ 3128.958799] ehci_hcd 0000:00:1d.7: PME# disabled[ 3128.958811] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20[ 3128.958825] ehci_hcd 0000:00:1d.7: setting latency timer to 64[ 3128.958869] pci 0000:00:1e.0: setting latency timer to 64[ 3128.958893] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 3128.958905] ata_piix 0000:00:1f.1: setting latency timer to 64[ 3128.960383] ata6: port disabled. ignoring.[ 3128.960468] ahci 0000:00:1f.2: setting latency timer to 64[ 3128.960719] wl 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 3128.960742] wl 0000:08:00.0: setting latency timer to 64[ 3128.965050] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object 20090521 exoparg2-445[ 3128.965084] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C1F7] (Node f604bdec), AE_AML_PACKAGE_LIMIT[ 3128.965206] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DC.C306._STM] (Node f604ee00), AE_AML_PACKAGE_LIMIT[ 3128.965346] ata5: ACPI set timing mode failed (status=0x300b)[ 3128.979399] sky2 0000:20:00.0: PME# disabled[ 3129.503007] sd 0:0:0:0: [sda] Starting disk[ 3129.843174] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[ 3129.851041] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[ 3129.851053] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[ 3129.851152] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[ 3129.851162] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[ 3129.859943] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[ 3129.859956] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[ 3129.860123] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[ 3129.860144] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[ 3129.860896] ata1.00: configured for UDMA/100[ 3129.862645] ata1.00: configured for UDMA/100[ 3129.862664] ata1: EH complete[ 3129.976207] usb 1-6: reset high speed USB device using ehci_hcd and address 4[ 3130.193208] usb 4-1: reset full speed USB device using uhci_hcd and address 2[ 3130.333295] btusb 4-1:1.0: no reset_resume for driver btusb?[ 3130.333314] btusb 4-1:1.1: no reset_resume for driver btusb?[ 3130.583951] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 3130.583966] pci 0000:00:02.0: setting latency timer to 64[ 3130.586751] PM: Finishing wakeup.[ 3130.586760] Restarting tasks ... done.[ 3280.227408] process `skype' is using obsolete setsockopt SO_BSDCOMPAT[ 3437.435023] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.12/linux-2.6.31/sound/pci/hda/hda_intel.c:698: azx_get_response timeout, switching to polling mode: last cmd=0x013f0c00[ 4040.820221] PM: Syncing filesystems ... done.[ 4041.025506] PM: Preparing system for mem sleep[ 4041.026591] Freezing user space processes ... (elapsed 0.00 seconds) done.[ 4041.028527] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[ 4041.028663] PM: Entering mem sleep[ 4041.028695] Suspending console(s) (use no_console_suspend to debug)[ 4041.029448] pci 0000:00:02.0: PCI INT A disabled[ 4041.042381] btusb_bulk_complete: hci0 urb f48d8e40 failed to resubmit (1)[ 4041.043370] btusb_bulk_complete: hci0 urb f443e440 failed to resubmit (1)[ 4041.044378] btusb_intr_complete: hci0 urb f5570240 failed to resubmit (1)[ 4041.067223] sd 0:0:0:0: [sda] Synchronizing SCSI cache[ 4041.114059] sd 0:0:0:0: [sda] Stopping disk[ 4042.141214] ACPI handle has no context![ 4042.142195] sky2 0000:20:00.0: PME# disabled[ 4042.153365] wl 0000:08:00.0: PCI INT A disabled[ 4042.186405] ata6: port disabled. ignoring.[ 4042.186513] ata_piix 0000:00:1f.1: PCI INT A disabled[ 4042.186543] ehci_hcd 0000:00:1d.7: PCI INT A disabled[ 4042.186560] uhci_hcd 0000:00:1d.3: PCI INT D disabled[ 4042.186576] uhci_hcd 0000:00:1d.2: PCI INT C disabled[ 4042.186591] uhci_hcd 0000:00:1d.1: PCI INT B disabled[ 4042.186607] uhci_hcd 0000:00:1d.0: PCI INT A disabled[ 4042.186647] HDA Intel 0000:00:1b.0: PCI INT A disabled[ 4042.197420] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3[ 4042.222777] ehci_hcd 0000:00:1d.7: PME# disabled[ 4042.233609] ACPI: Preparing to enter system sleep state S3[ 4042.234476] Disabling non-boot CPUs ...[ 4042.235671] Unmapping cpu 1 from all nodes[ 4042.237080] CPU 1 is now offline[ 4042.237090] SMP alternatives: switching to UP code[ 4042.245740] CPU0 attaching NULL sched-domain.[ 4042.245751] CPU1 attaching NULL sched-domain.[ 4042.245848] CPU0 attaching NULL sched-domain.[ 4042.246581] CPU1 is down[ 4042.246670] Extended CMOS year: 2000[ 4042.246670] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106[ 4042.246670] Back to C![ 4042.246670] microcode: CPU0 updated to revision 0x20a, date = 2008-06-04 [ 4042.246670] CPU0: Thermal monitoring enabled (TM1)[ 4042.246670] Extended CMOS year: 2000[ 4042.246670] Enabling non-boot CPUs ...[ 4042.249415] SMP alternatives: switching to SMP code[ 4042.257086] Booting processor 1 APIC 0x1 ip 0x6000[ 4042.245117] Initializing CPU#1[ 4042.245117] Mapping cpu 1 to node 0[ 4042.245117] Calibrating delay using timer specific routine.. 3192.03 BogoMIPS (lpj=1596016)[ 4042.245117] CPU: L1 I cache: 32K, L1 D cache: 24K[ 4042.245117] CPU: L2 cache: 512K[ 4042.245117] CPU: Physical Processor ID: 0[ 4042.245117] CPU: Processor Core ID: 0[ 4042.245117] mce: CPU supports 5 MCE banks[ 4042.245117] CPU1: Thermal monitoring enabled (TM1)[ 4042.245117] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106[ 4042.329126] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02[ 4042.329227] CPU0 attaching NULL sched-domain.[ 4042.330276] Switched to high resolution mode on CPU 1[ 4042.332207] CPU0 attaching sched-domain:[ 4042.332218] domain 0: span 0-1 level SIBLING[ 4042.332229] groups: 0 1[ 4042.332247] domain 1: span 0-1 level NODE[ 4042.332257] groups: 0-1[ 4042.332273] CPU1 attaching sched-domain:[ 4042.332282] domain 0: span 0-1 level SIBLING[ 4042.332293] groups: 1 0[ 4042.332309] domain 1: span 0-1 level NODE[ 4042.332319] groups: 0-1[ 4042.334758] microcode: CPU1 updated to revision 0x20a, date = 2008-06-04 [ 4042.340309] CPU1 is up[ 4042.340320] ACPI: Waking up from system sleep state S3[ 4042.567694] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[ 4042.567764] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xe8200000)[ 4042.567784] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)[ 4042.567834] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[ 4042.567876] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[ 4042.567897] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)[ 4042.567959] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)[ 4042.567989] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[ 4042.568032] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0)[ 4042.568058] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[ 4042.568079] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[ 4042.568167] pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x4030b)[ 4042.568198] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[ 4042.568217] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xe7f0e400)[ 4042.568236] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005040)[ 4042.568264] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[ 4042.568286] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[ 4042.568373] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x4040a)[ 4042.568404] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0x40014001)[ 4042.568423] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xe3f0e000)[ 4042.568442] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020)[ 4042.568467] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[ 4042.568488] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[ 4042.568561] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[ 4042.568592] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x6021)[ 4042.568624] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[ 4042.568658] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)[ 4042.568689] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x6041)[ 4042.568721] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[ 4042.568753] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)[ 4042.568785] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x6061)[ 4042.568816] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[ 4042.568849] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40a)[ 4042.568880] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x6081)[ 4042.568912] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[ 4042.568956] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a)[ 4042.568996] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xe8284000)[ 4042.569039] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)[ 4042.569080] ehci_hcd 0000:00:1d.7: PME# disabled[ 4042.569119] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[ 4042.569138] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)[ 4042.569169] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)[ 4042.569276] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)[ 4042.569308] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x60a1)[ 4042.569377] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xe8285000)[ 4042.569396] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x60d1)[ 4042.569428] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)[ 4042.569541] wl 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)[ 4042.569602] wl 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe8000004)[ 4042.569623] wl 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[ 4042.569649] wl 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)[ 4042.569992] sky2 0000:20:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[ 4042.570144] sky2 0000:20:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001)[ 4042.570203] sky2 0000:20:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe0000004)[ 4042.570241] sky2 0000:20:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[ 4042.570299] sky2 0000:20:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[ 4042.866076] pci 0000:00:02.0: PME# disabled[ 4042.866090] pci 0000:00:02.1: PME# disabled[ 4042.866110] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21[ 4042.866125] HDA Intel 0000:00:1b.0: setting latency timer to 64[ 4042.866186] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20[ 4042.866201] uhci_hcd 0000:00:1d.0: setting latency timer to 64[ 4042.866236] usb usb2: root hub lost power or was reset[ 4042.866284] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21[ 4042.866302] uhci_hcd 0000:00:1d.1: setting latency timer to 64[ 4042.866343] usb usb3: root hub lost power or was reset[ 4042.866375] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18[ 4042.866389] uhci_hcd 0000:00:1d.2: setting latency timer to 64[ 4042.866422] usb usb4: root hub lost power or was reset[ 4042.866469] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19[ 4042.866484] uhci_hcd 0000:00:1d.3: setting latency timer to 64[ 4042.866517] usb usb5: root hub lost power or was reset[ 4042.866546] ehci_hcd 0000:00:1d.7: PME# disabled[ 4042.866558] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20[ 4042.866572] ehci_hcd 0000:00:1d.7: setting latency timer to 64[ 4042.866617] pci 0000:00:1e.0: setting latency timer to 64[ 4042.866640] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 4042.866653] ata_piix 0000:00:1f.1: setting latency timer to 64[ 4042.870378] ata6: port disabled. ignoring.[ 4042.870462] ahci 0000:00:1f.2: setting latency timer to 64[ 4042.870717] wl 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 4042.870739] wl 0000:08:00.0: setting latency timer to 64[ 4042.872397] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object 20090521 exoparg2-445[ 4042.872433] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C1F7] (Node f604bdec), AE_AML_PACKAGE_LIMIT[ 4042.872560] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DC.C306._STM] (Node f604ee00), AE_AML_PACKAGE_LIMIT[ 4042.872702] ata5: ACPI set timing mode failed (status=0x300b)[ 4042.889341] sky2 0000:20:00.0: PME# disabled[ 4043.412719] sd 0:0:0:0: [sda] Starting disk[ 4043.752203] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[ 4043.760085] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[ 4043.760097] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[ 4043.760156] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[ 4043.760166] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[ 4043.768935] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[ 4043.768948] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[ 4043.769036] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[ 4043.769047] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[ 4043.769764] ata1.00: configured for UDMA/100[ 4043.771483] ata1.00: configured for UDMA/100[ 4043.771503] ata1: EH complete[ 4043.884224] usb 1-6: reset high speed USB device using ehci_hcd and address 4[ 4044.101209] usb 4-1: reset full speed USB device using uhci_hcd and address 2[ 4044.241296] btusb 4-1:1.0: no reset_resume for driver btusb?[ 4044.241316] btusb 4-1:1.1: no reset_resume for driver btusb?[ 4044.491941] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 4044.491956] pci 0000:00:02.0: setting latency timer to 64[ 4044.494746] PM: Finishing wakeup.[ 4044.494755] Restarting tasks ... done.[13105.315664] npviewer.bin[5252]: segfault at ff999ea8 ip ff999ea8 sp bfad01cc error 14[16024.392294] npviewer.bin[8650]: segfault at ff999ea8 ip ff999ea8 sp bfdac98c error 14[16032.592203] npviewer.bin[8912]: segfault at ff999ea8 ip ff999ea8 sp bfc1712c error 14[16939.720551] npviewer.bin[8936]: segfault at ff999ea8 ip ff999ea8 sp bfad96cc error 14[21757.421654] PM: Syncing filesystems ... done.[21757.623082] PM: Preparing system for mem sleep[21757.623874] Freezing user space processes ... (elapsed 0.00 seconds) done.[21757.632632] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[21757.632769] PM: Entering mem sleep[21757.632798] Suspending console(s) (use no_console_suspend to debug)[21757.633542] pci 0000:00:02.0: PCI INT A disabled[21757.646512] btusb_bulk_complete: hci0 urb f443e440 failed to resubmit (1)[21757.647512] btusb_bulk_complete: hci0 urb f48d8e40 failed to resubmit (1)[21757.648502] btusb_intr_complete: hci0 urb f5570240 failed to resubmit (1)[21757.671216] sd 0:0:0:0: [sda] Synchronizing SCSI cache[21757.671384] sd 0:0:0:0: [sda] Stopping disk[21758.689208] ACPI handle has no context![21758.690179] sky2 0000:20:00.0: PME# disabled[21758.709528] wl 0000:08:00.0: PCI INT A disabled[21758.742403] ata6: port disabled. ignoring.[21758.742518] ata_piix 0000:00:1f.1: PCI INT A disabled[21758.742547] ehci_hcd 0000:00:1d.7: PCI INT A disabled[21758.742564] uhci_hcd 0000:00:1d.3: PCI INT D disabled[21758.742580] uhci_hcd 0000:00:1d.2: PCI INT C disabled[21758.742596] uhci_hcd 0000:00:1d.1: PCI INT B disabled[21758.742612] uhci_hcd 0000:00:1d.0: PCI INT A disabled[21758.742651] HDA Intel 0000:00:1b.0: PCI INT A disabled[21758.753440] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3[21758.778789] ehci_hcd 0000:00:1d.7: PME# disabled[21758.789611] ACPI: Preparing to enter system sleep state S3[21758.790510] Disabling non-boot CPUs ...[21758.791701] Unmapping cpu 1 from all nodes[21758.793081] CPU 1 is now offline[21758.793090] SMP alternatives: switching to UP code[21758.801828] CPU0 attaching NULL sched-domain.[21758.801839] CPU1 attaching NULL sched-domain.[21758.801937] CPU0 attaching NULL sched-domain.[21758.802785] CPU1 is down[21758.802874] Extended CMOS year: 2000[21758.802874] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106[21758.802874] Back to C![21758.802874] microcode: CPU0 updated to revision 0x20a, date = 2008-06-04 [21758.802874] CPU0: Thermal monitoring enabled (TM1)[21758.802874] Extended CMOS year: 2000[21758.802874] Enabling non-boot CPUs ...[21758.805406] SMP alternatives: switching to SMP code[21758.813078] Booting processor 1 APIC 0x1 ip 0x6000[21758.801115] Initializing CPU#1[21758.801115] Mapping cpu 1 to node 0[21758.801115] Calibrating delay using timer specific routine.. 3192.01 BogoMIPS (lpj=1596007)[21758.801115] CPU: L1 I cache: 32K, L1 D cache: 24K[21758.801115] CPU: L2 cache: 512K[21758.801115] CPU: Physical Processor ID: 0[21758.801115] CPU: Processor Core ID: 0[21758.801115] mce: CPU supports 5 MCE banks[21758.801115] CPU1: Thermal monitoring enabled (TM1)[21758.801115] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106[21758.885163] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02[21758.885265] CPU0 attaching NULL sched-domain.[21758.886276] Switched to high resolution mode on CPU 1[21758.888206] CPU0 attaching sched-domain:[21758.888217] domain 0: span 0-1 level SIBLING[21758.888229] groups: 0 1[21758.888247] domain 1: span 0-1 level NODE[21758.888256] groups: 0-1[21758.888273] CPU1 attaching sched-domain:[21758.888283] domain 0: span 0-1 level SIBLING[21758.888293] groups: 1 0[21758.888310] domain 1: span 0-1 level NODE[21758.888320] groups: 0-1[21758.890771] microcode: CPU1 updated to revision 0x20a, date = 2008-06-04 [21758.896308] CPU1 is up[21758.896318] ACPI: Waking up from system sleep state S3[21759.127788] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[21759.127857] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xe8200000)[21759.127877] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)[21759.127927] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[21759.127969] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[21759.127990] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)[21759.128074] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)[21759.128104] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[21759.128126] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0)[21759.128151] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[21759.128172] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[21759.128261] pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x4030b)[21759.128291] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[21759.128310] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xe7f0e400)[21759.128330] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x5040)[21759.128355] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[21759.128377] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[21759.128464] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x4040a)[21759.128494] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0x40014001)[21759.128513] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xe3f0e000)[21759.128532] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020)[21759.128557] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[21759.128578] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[21759.128649] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[21759.128681] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x6021)[21759.128712] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[21759.128746] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)[21759.128777] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x6041)[21759.128809] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[21759.128841] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)[21759.128873] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x6061)[21759.128904] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[21759.128936] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40a)[21759.128967] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x6081)[21759.128999] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[21759.129064] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a)[21759.129104] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xe8284000)[21759.129127] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)[21759.129166] ehci_hcd 0000:00:1d.7: PME# disabled[21759.129205] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[21759.129223] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)[21759.129254] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)[21759.129359] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)[21759.129391] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x60a1)[21759.129460] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xe8285000)[21759.129479] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x60d1)[21759.129510] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)[21759.129623] wl 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)[21759.129684] wl 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe8000004)[21759.129705] wl 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[21759.129731] wl 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)[21759.130085] sky2 0000:20:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[21759.130222] sky2 0000:20:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001)[21759.130278] sky2 0000:20:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe0000004)[21759.130315] sky2 0000:20:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[21759.130373] sky2 0000:20:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[21759.410211] pci 0000:00:02.0: PME# disabled[21759.410227] pci 0000:00:02.1: PME# disabled[21759.410247] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21[21759.410278] HDA Intel 0000:00:1b.0: setting latency timer to 64[21759.410350] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20[21759.410365] uhci_hcd 0000:00:1d.0: setting latency timer to 64[21759.410400] usb usb2: root hub lost power or was reset[21759.410432] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21[21759.410446] uhci_hcd 0000:00:1d.1: setting latency timer to 64[21759.410478] usb usb3: root hub lost power or was reset[21759.410508] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18[21759.410522] uhci_hcd 0000:00:1d.2: setting latency timer to 64[21759.410555] usb usb4: root hub lost power or was reset[21759.410602] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19[21759.410617] uhci_hcd 0000:00:1d.3: setting latency timer to 64[21759.410649] usb usb5: root hub lost power or was reset[21759.410678] ehci_hcd 0000:00:1d.7: PME# disabled[21759.410690] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20[21759.410704] ehci_hcd 0000:00:1d.7: setting latency timer to 64[21759.410749] pci 0000:00:1e.0: setting latency timer to 64[21759.410773] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16[21759.410785] ata_piix 0000:00:1f.1: setting latency timer to 64[21759.414381] ata6: port disabled. ignoring.[21759.414465] ahci 0000:00:1f.2: setting latency timer to 64[21759.414709] wl 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[21759.414732] wl 0000:08:00.0: setting latency timer to 64[21759.416578] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object 20090521 exoparg2-445[21759.416616] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C1F7] (Node f604bdec), AE_AML_PACKAGE_LIMIT[21759.416742] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DC.C306._STM] (Node f604ee00), AE_AML_PACKAGE_LIMIT[21759.416883] ata5: ACPI set timing mode failed (status=0x300b)[21759.433214] sky2 0000:20:00.0: PME# disabled[21759.953746] sd 0:0:0:0: [sda] Starting disk[21760.194202] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[21760.202118] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[21760.202130] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[21760.202248] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[21760.202269] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[21760.211098] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[21760.211110] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[21760.211228] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[21760.211250] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[21760.212140] ata1.00: configured for UDMA/100[21760.214067] ata1.00: configured for UDMA/100[21760.214092] ata1: EH complete[21760.327217] usb 1-6: reset high speed USB device using ehci_hcd and address 4[21760.544213] usb 4-1: reset full speed USB device using uhci_hcd and address 2[21760.684279] btusb 4-1:1.0: no reset_resume for driver btusb?[21760.684290] btusb 4-1:1.1: no reset_resume for driver btusb?[21760.934966] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[21760.934981] pci 0000:00:02.0: setting latency timer to 64[21760.937778] PM: Finishing wakeup.[21760.937789] Restarting tasks ... done.[21771.810367] PM: Syncing filesystems ... done.[21772.026985] PM: Preparing system for mem sleep[21772.028224] Freezing user space processes ... (elapsed 0.00 seconds) done.[21772.030310] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[21772.030446] PM: Entering mem sleep[21772.030476] Suspending console(s) (use no_console_suspend to debug)[21772.031220] pci 0000:00:02.0: PCI INT A disabled[21772.044262] btusb_bulk_complete: hci0 urb f5570240 failed to resubmit (1)[21772.045267] btusb_bulk_complete: hci0 urb f48d8e40 failed to resubmit (1)[21772.046252] btusb_intr_complete: hci0 urb e8c5f5c0 failed to resubmit (1)[21772.069225] sd 0:0:0:0: [sda] Synchronizing SCSI cache[21772.100111] sd 0:0:0:0: [sda] Stopping disk[21773.112185] ACPI handle has no context![21773.113160] sky2 0000:20:00.0: PME# disabled[21773.124376] wl 0000:08:00.0: PCI INT A disabled[21773.157404] ata6: port disabled. ignoring.[21773.157512] ata_piix 0000:00:1f.1: PCI INT A disabled[21773.157541] ehci_hcd 0000:00:1d.7: PCI INT A disabled[21773.157558] uhci_hcd 0000:00:1d.3: PCI INT D disabled[21773.157574] uhci_hcd 0000:00:1d.2: PCI INT C disabled[21773.157589] uhci_hcd 0000:00:1d.1: PCI INT B disabled[21773.157605] uhci_hcd 0000:00:1d.0: PCI INT A disabled[21773.157645] HDA Intel 0000:00:1b.0: PCI INT A disabled[21773.168423] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3[21773.194185] ehci_hcd 0000:00:1d.7: PME# disabled[21773.205607] ACPI: Preparing to enter system sleep state S3[21773.206474] Disabling non-boot CPUs ...[21773.207672] Unmapping cpu 1 from all nodes[21773.209069] CPU 1 is now offline[21773.209079] SMP alternatives: switching to UP code[21773.217745] CPU0 attaching NULL sched-domain.[21773.217756] CPU1 attaching NULL sched-domain.[21773.217854] CPU0 attaching NULL sched-domain.[21773.218605] CPU1 is down[21773.218692] Extended CMOS year: 2000[21773.218692] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106[21773.218692] Back to C![21773.218692] microcode: CPU0 updated to revision 0x20a, date = 2008-06-04 [21773.218692] CPU0: Thermal monitoring enabled (TM1)[21773.218692] Extended CMOS year: 2000[21773.218692] Enabling non-boot CPUs ...[21773.221405] SMP alternatives: switching to SMP code[21773.229066] Booting processor 1 APIC 0x1 ip 0x6000[21773.217073] Initializing CPU#1[21773.217073] Mapping cpu 1 to node 0[21773.217073] Calibrating delay using timer specific routine.. 3192.03 BogoMIPS (lpj=1596018)[21773.217073] CPU: L1 I cache: 32K, L1 D cache: 24K[21773.217073] CPU: L2 cache: 512K[21773.217073] CPU: Physical Processor ID: 0[21773.217073] CPU: Processor Core ID: 0[21773.217073] mce: CPU supports 5 MCE banks[21773.217073] CPU1: Thermal monitoring enabled (TM1)[21773.217073] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106[21773.301161] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02[21773.301263] CPU0 attaching NULL sched-domain.[21773.302277] Switched to high resolution mode on CPU 1[21773.304208] CPU0 attaching sched-domain:[21773.304219] domain 0: span 0-1 level SIBLING[21773.304230] groups: 0 1[21773.304248] domain 1: span 0-1 level NODE[21773.304258] groups: 0-1[21773.304275] CPU1 attaching sched-domain:[21773.304284] domain 0: span 0-1 level SIBLING[21773.304294] groups: 1 0[21773.304311] domain 1: span 0-1 level NODE[21773.304321] groups: 0-1[21773.306771] microcode: CPU1 updated to revision 0x20a, date = 2008-06-04 [21773.312310] CPU1 is up[21773.312320] ACPI: Waking up from system sleep state S3[21773.543733] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[21773.543802] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xe8200000)[21773.543822] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)[21773.543871] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[21773.543913] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[21773.543934] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)[21773.543995] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)[21773.544047] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[21773.544069] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0)[21773.544094] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[21773.544116] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[21773.544204] pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x4030b)[21773.544234] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[21773.544253] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xe7f0e400)[21773.544272] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005040)[21773.544298] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[21773.544319] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[21773.544406] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x4040a)[21773.544436] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0x40014001)[21773.544455] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xe3f0e000)[21773.544474] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020)[21773.544500] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[21773.544521] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[21773.544593] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[21773.544625] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x6021)[21773.544656] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[21773.544690] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)[21773.544722] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x6041)[21773.544753] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[21773.544786] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)[21773.544817] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x6061)[21773.544849] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[21773.544881] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40a)[21773.544912] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x6081)[21773.544944] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[21773.544988] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a)[21773.545048] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xe8284000)[21773.545071] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)[21773.545112] ehci_hcd 0000:00:1d.7: PME# disabled[21773.545151] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[21773.545169] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)[21773.545200] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)[21773.545308] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)[21773.545340] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x60a1)[21773.545409] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xe8285000)[21773.545428] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x60d1)[21773.545460] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)[21773.545572] wl 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)[21773.545633] wl 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe8000004)[21773.545655] wl 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[21773.545680] wl 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)[21773.546045] sky2 0000:20:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[21773.546178] sky2 0000:20:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001)[21773.546237] sky2 0000:20:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe0000004)[21773.546292] sky2 0000:20:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[21773.546352] sky2 0000:20:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[21773.845114] pci 0000:00:02.0: PME# disabled[21773.845129] pci 0000:00:02.1: PME# disabled[21773.845149] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21[21773.845164] HDA Intel 0000:00:1b.0: setting latency timer to 64[21773.845226] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20[21773.845240] uhci_hcd 0000:00:1d.0: setting latency timer to 64[21773.845275] usb usb2: root hub lost power or was reset[21773.845323] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21[21773.845341] uhci_hcd 0000:00:1d.1: setting latency timer to 64[21773.845383] usb usb3: root hub lost power or was reset[21773.845416] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18[21773.845430] uhci_hcd 0000:00:1d.2: setting latency timer to 64[21773.845462] usb usb4: root hub lost power or was reset[21773.845510] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19[21773.845524] uhci_hcd 0000:00:1d.3: setting latency timer to 64[21773.845557] usb usb5: root hub lost power or was reset[21773.845586] ehci_hcd 0000:00:1d.7: PME# disabled[21773.845598] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20[21773.845612] ehci_hcd 0000:00:1d.7: setting latency timer to 64[21773.845657] pci 0000:00:1e.0: setting latency timer to 64[21773.845681] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16[21773.845693] ata_piix 0000:00:1f.1: setting latency timer to 64[21773.849381] ata6: port disabled. ignoring.[21773.849464] ahci 0000:00:1f.2: setting latency timer to 64[21773.849715] wl 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[21773.849738] wl 0000:08:00.0: setting latency timer to 64[21773.851445] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object 20090521 exoparg2-445[21773.851481] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C1F7] (Node f604bdec), AE_AML_PACKAGE_LIMIT[21773.851607] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DC.C306._STM] (Node f604ee00), AE_AML_PACKAGE_LIMIT[21773.851748] ata5: ACPI set timing mode failed (status=0x300b)[21773.868439] sky2 0000:20:00.0: PME# disabled[21774.388669] sd 0:0:0:0: [sda] Starting disk[21774.681171] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[21774.689039] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[21774.689050] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[21774.689110] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[21774.689121] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[21774.697962] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[21774.697974] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[21774.698051] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[21774.698061] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[21774.698855] ata1.00: configured for UDMA/100[21774.700617] ata1.00: configured for UDMA/100[21774.700656] ata1: EH complete[21774.813217] usb 1-6: reset high speed USB device using ehci_hcd and address 4[21775.030236] usb 4-1: reset full speed USB device using uhci_hcd and address 2[21775.171298] btusb 4-1:1.0: no reset_resume for driver btusb?[21775.171317] btusb 4-1:1.1: no reset_resume for driver btusb?[21775.421970] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[21775.421985] pci 0000:00:02.0: setting latency timer to 64[21775.424785] PM: Finishing wakeup.[21775.424795] Restarting tasks ... done.[23577.118132] PM: Syncing filesystems ... done.[23577.335561] PM: Preparing system for mem sleep[23577.336888] Freezing user space processes ... (elapsed 0.00 seconds) done.[23577.338861] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[23577.339001] PM: Entering mem sleep[23577.339037] Suspending console(s) (use no_console_suspend to debug)[23577.339781] pci 0000:00:02.0: PCI INT A disabled[23577.352487] btusb_bulk_complete: hci0 urb d0d2c4c0 failed to resubmit (1)[23577.353492] btusb_bulk_complete: hci0 urb f4cd1340 failed to resubmit (1)[23577.354484] btusb_intr_complete: hci0 urb d0d0b7c0 failed to resubmit (1)[23577.377215] sd 0:0:0:0: [sda] Synchronizing SCSI cache[23577.396861] sd 0:0:0:0: [sda] Stopping disk[23578.399264] ACPI handle has no context![23578.400218] sky2 0000:20:00.0: PME# disabled[23578.411399] wl 0000:08:00.0: PCI INT A disabled[23578.444381] ata6: port disabled. ignoring.[23578.444488] ata_piix 0000:00:1f.1: PCI INT A disabled[23578.444518] ehci_hcd 0000:00:1d.7: PCI INT A disabled[23578.444535] uhci_hcd 0000:00:1d.3: PCI INT D disabled[23578.444551] uhci_hcd 0000:00:1d.2: PCI INT C disabled[23578.444566] uhci_hcd 0000:00:1d.1: PCI INT B disabled[23578.444582] uhci_hcd 0000:00:1d.0: PCI INT A disabled[23578.444621] HDA Intel 0000:00:1b.0: PCI INT A disabled[23578.455423] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3[23578.480972] ehci_hcd 0000:00:1d.7: PME# disabled[23578.491607] ACPI: Preparing to enter system sleep state S3[23578.492473] Disabling non-boot CPUs ...[23578.493673] Unmapping cpu 1 from all nodes[23578.495070] CPU 1 is now offline[23578.495080] SMP alternatives: switching to UP code[23578.503767] CPU0 attaching NULL sched-domain.[23578.503777] CPU1 attaching NULL sched-domain.[23578.503875] CPU0 attaching NULL sched-domain.[23578.504639] CPU1 is down[23578.504728] Extended CMOS year: 2000[23578.504728] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106[23578.504728] Back to C![23578.504728] microcode: CPU0 updated to revision 0x20a, date = 2008-06-04 [23578.504728] CPU0: Thermal monitoring enabled (TM1)[23578.504728] Extended CMOS year: 2000[23578.504728] Enabling non-boot CPUs ...[23578.507411] SMP alternatives: switching to SMP code[23578.515072] Booting processor 1 APIC 0x1 ip 0x6000[23578.503138] Initializing CPU#1[23578.503138] Mapping cpu 1 to node 0[23578.503138] Calibrating delay using timer specific routine.. 3192.04 BogoMIPS (lpj=1596021)[23578.503138] CPU: L1 I cache: 32K, L1 D cache: 24K[23578.503138] CPU: L2 cache: 512K[23578.503138] CPU: Physical Processor ID: 0[23578.503138] CPU: Processor Core ID: 0[23578.503138] mce: CPU supports 5 MCE banks[23578.503138] CPU1: Thermal monitoring enabled (TM1)[23578.503138] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106[23578.587138] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02[23578.587240] CPU0 attaching NULL sched-domain.[23578.588276] Switched to high resolution mode on CPU 1[23578.590207] CPU0 attaching sched-domain:[23578.590219] domain 0: span 0-1 level SIBLING[23578.590230] groups: 0 1[23578.590248] domain 1: span 0-1 level NODE[23578.590258] groups: 0-1[23578.590274] CPU1 attaching sched-domain:[23578.590284] domain 0: span 0-1 level SIBLING[23578.590294] groups: 1 0[23578.590311] domain 1: span 0-1 level NODE[23578.590321] groups: 0-1[23578.592767] microcode: CPU1 updated to revision 0x20a, date = 2008-06-04 [23578.598309] CPU1 is up[23578.598318] ACPI: Waking up from system sleep state S3[23578.825684] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[23578.825753] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xe8200000)[23578.825773] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)[23578.825822] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[23578.825865] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[23578.825885] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)[23578.825946] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)[23578.825977] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[23578.825998] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0)[23578.826044] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[23578.826066] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[23578.826155] pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x4030b)[23578.826185] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[23578.826204] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xe7f0e400)[23578.826223] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x5040)[23578.826249] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[23578.826270] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[23578.826357] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x4040a)[23578.826387] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0x40014001)[23578.826406] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xe3f0e000)[23578.826425] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020)[23578.826451] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[23578.826472] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[23578.826544] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[23578.826575] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x6021)[23578.826607] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[23578.826641] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)[23578.826672] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x6041)[23578.826704] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[23578.826736] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)[23578.826768] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x6061)[23578.826799] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[23578.826831] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40a)[23578.826863] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x6081)[23578.826894] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[23578.826938] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a)[23578.826979] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xe8284000)[23578.827002] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)[23578.827062] ehci_hcd 0000:00:1d.7: PME# disabled[23578.827101] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[23578.827119] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)[23578.827150] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)[23578.827254] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)[23578.827287] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x60a1)[23578.827357] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xe8285000)[23578.827376] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x60d1)[23578.827408] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)[23578.827521] wl 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)[23578.827581] wl 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe8000004)[23578.827602] wl 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[23578.827627] wl 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)[23578.827973] sky2 0000:20:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[23578.828145] sky2 0000:20:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001)[23578.828206] sky2 0000:20:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe0000004)[23578.828245] sky2 0000:20:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[23578.828301] sky2 0000:20:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[23579.121062] pci 0000:00:02.0: PME# disabled[23579.121076] pci 0000:00:02.1: PME# disabled[23579.121096] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21[23579.121111] HDA Intel 0000:00:1b.0: setting latency timer to 64[23579.121173] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20[23579.121188] uhci_hcd 0000:00:1d.0: setting latency timer to 64[23579.121222] usb usb2: root hub lost power or was reset[23579.121254] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21[23579.121280] uhci_hcd 0000:00:1d.1: setting latency timer to 64[23579.121320] usb usb3: root hub lost power or was reset[23579.121359] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18[23579.121373] uhci_hcd 0000:00:1d.2: setting latency timer to 64[23579.121406] usb usb4: root hub lost power or was reset[23579.121452] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19[23579.121467] uhci_hcd 0000:00:1d.3: setting latency timer to 64[23579.121499] usb usb5: root hub lost power or was reset[23579.121529] ehci_hcd 0000:00:1d.7: PME# disabled[23579.121540] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20[23579.121554] ehci_hcd 0000:00:1d.7: setting latency timer to 64[23579.121599] pci 0000:00:1e.0: setting latency timer to 64[23579.121623] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16[23579.121635] ata_piix 0000:00:1f.1: setting latency timer to 64[23579.125379] ata6: port disabled. ignoring.[23579.125462] ahci 0000:00:1f.2: setting latency timer to 64[23579.125715] wl 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[23579.125737] wl 0000:08:00.0: setting latency timer to 64[23579.127347] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object 20090521 exoparg2-445[23579.127382] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C1F7] (Node f604bdec), AE_AML_PACKAGE_LIMIT[23579.127510] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DC.C306._STM] (Node f604ee00), AE_AML_PACKAGE_LIMIT[23579.127652] ata5: ACPI set timing mode failed (status=0x300b)[23579.144402] sky2 0000:20:00.0: PME# disabled[23579.667900] sd 0:0:0:0: [sda] Starting disk[23580.008173] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[23580.016031] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[23580.016043] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[23580.016102] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[23580.016112] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[23580.024926] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[23580.024938] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[23580.025028] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[23580.025039] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[23580.025770] ata1.00: configured for UDMA/100[23580.027486] ata1.00: configured for UDMA/100[23580.027506] ata1: EH complete[23580.140206] usb 1-6: reset high speed USB device using ehci_hcd and address 4[23580.357211] usb 4-1: reset full speed USB device using uhci_hcd and address 2[23580.496306] btusb 4-1:1.0: no reset_resume for driver btusb?[23580.496325] btusb 4-1:1.1: no reset_resume for driver btusb?[23580.746933] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[23580.746948] pci 0000:00:02.0: setting latency timer to 64[23580.749720] PM: Finishing wakeup.[23580.749729] Restarting tasks ... done.[25524.036592] PM: Syncing filesystems ... done.[25524.255110] PM: Preparing system for mem sleep[25524.255924] Freezing user space processes ... (elapsed 0.00 seconds) done.[25524.257800] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[25524.257940] PM: Entering mem sleep[25524.257972] Suspending console(s) (use no_console_suspend to debug)[25524.258737] pci 0000:00:02.0: PCI INT A disabled[25524.271511] btusb_bulk_complete: hci0 urb f4cd1340 failed to resubmit (1)[25524.272501] btusb_bulk_complete: hci0 urb d0d2c4c0 failed to resubmit (1)[25524.273491] btusb_intr_complete: hci0 urb f48d8c40 failed to resubmit (1)[25524.296226] sd 0:0:0:0: [sda] Synchronizing SCSI cache[25524.319602] sd 0:0:0:0: [sda] Stopping disk[25525.336234] ACPI handle has no context![25525.337212] sky2 0000:20:00.0: PME# disabled[25525.348401] wl 0000:08:00.0: PCI INT A disabled[25525.381380] ata6: port disabled. ignoring.[25525.381487] ata_piix 0000:00:1f.1: PCI INT A disabled[25525.381516] ehci_hcd 0000:00:1d.7: PCI INT A disabled[25525.381533] uhci_hcd 0000:00:1d.3: PCI INT D disabled[25525.381549] uhci_hcd 0000:00:1d.2: PCI INT C disabled[25525.381565] uhci_hcd 0000:00:1d.1: PCI INT B disabled[25525.381580] uhci_hcd 0000:00:1d.0: PCI INT A disabled[25525.381620] HDA Intel 0000:00:1b.0: PCI INT A disabled[25525.392423] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3[25525.424369] ehci_hcd 0000:00:1d.7: PME# disabled[25525.435606] ACPI: Preparing to enter system sleep state S3[25525.436474] Disabling non-boot CPUs ...[25525.437673] Unmapping cpu 1 from all nodes[25525.439071] CPU 1 is now offline[25525.439081] SMP alternatives: switching to UP code[25525.447825] CPU0 attaching NULL sched-domain.[25525.447836] CPU1 attaching NULL sched-domain.[25525.447934] CPU0 attaching NULL sched-domain.[25525.448683] CPU1 is down[25525.448772] Extended CMOS year: 2000[25525.448772] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106[25525.448772] Back to C![25525.448772] microcode: CPU0 updated to revision 0x20a, date = 2008-06-04 [25525.448772] CPU0: Thermal monitoring enabled (TM1)[25525.448772] Extended CMOS year: 2000[25525.448772] Enabling non-boot CPUs ...[25525.451420] SMP alternatives: switching to SMP code[25525.459092] Booting processor 1 APIC 0x1 ip 0x6000[25525.447115] Initializing CPU#1[25525.447115] Mapping cpu 1 to node 0[25525.447115] Calibrating delay using timer specific routine.. 3192.01 BogoMIPS (lpj=1596005)[25525.447115] CPU: L1 I cache: 32K, L1 D cache: 24K[25525.447115] CPU: L2 cache: 512K[25525.447115] CPU: Physical Processor ID: 0[25525.447115] CPU: Processor Core ID: 0[25525.447115] mce: CPU supports 5 MCE banks[25525.447115] CPU1: Thermal monitoring enabled (TM1)[25525.447115] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106[25525.531126] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02[25525.531230] CPU0 attaching NULL sched-domain.[25525.531279] Switched to high resolution mode on CPU 1[25525.533206] CPU0 attaching sched-domain:[25525.533218] domain 0: span 0-1 level SIBLING[25525.533229] groups: 0 1[25525.533247] domain 1: span 0-1 level NODE[25525.533257] groups: 0-1[25525.533273] CPU1 attaching sched-domain:[25525.533283] domain 0: span 0-1 level SIBLING[25525.533293] groups: 1 0[25525.533310] domain 1: span 0-1 level NODE[25525.533320] groups: 0-1[25525.535765] microcode: CPU1 updated to revision 0x20a, date = 2008-06-04 [25525.541303] CPU1 is up[25525.541312] ACPI: Waking up from system sleep state S3[25525.772722] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[25525.772792] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xe8200000)[25525.772812] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)[25525.772861] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[25525.772903] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[25525.772924] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)[25525.772985] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)[25525.773037] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[25525.773058] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0)[25525.773083] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[25525.773105] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[25525.773193] pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x4030b)[25525.773223] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[25525.773242] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xe7f0e400)[25525.773262] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x20005040)[25525.773288] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[25525.773310] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[25525.773397] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x4040a)[25525.773427] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0x40014001)[25525.773446] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xe3f0e000)[25525.773465] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020)[25525.773490] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[25525.773512] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[25525.773584] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[25525.773615] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x6021)[25525.773646] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[25525.773680] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)[25525.773711] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x6041)[25525.773742] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[25525.773775] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)[25525.773806] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x6061)[25525.773837] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[25525.773869] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40a)[25525.773901] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x6081)[25525.773932] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[25525.773976] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a)[25525.774035] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xe8284000)[25525.774059] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)[25525.774099] ehci_hcd 0000:00:1d.7: PME# disabled[25525.774138] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[25525.774156] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)[25525.774187] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)[25525.774295] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)[25525.774327] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x60a1)[25525.774396] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xe8285000)[25525.774415] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x60d1)[25525.774446] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)[25525.774559] wl 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)[25525.774620] wl 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe8000004)[25525.774642] wl 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[25525.774667] wl 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)[25525.775031] sky2 0000:20:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[25525.775169] sky2 0000:20:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001)[25525.775228] sky2 0000:20:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe0000004)[25525.775289] sky2 0000:20:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[25525.775347] sky2 0000:20:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[25526.071167] pci 0000:00:02.0: PME# disabled[25526.071182] pci 0000:00:02.1: PME# disabled[25526.071202] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21[25526.071218] HDA Intel 0000:00:1b.0: setting latency timer to 64[25526.071297] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20[25526.071316] uhci_hcd 0000:00:1d.0: setting latency timer to 64[25526.071358] usb usb2: root hub lost power or was reset[25526.071391] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21[25526.071405] uhci_hcd 0000:00:1d.1: setting latency timer to 64[25526.071438] usb usb3: root hub lost power or was reset[25526.071468] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18[25526.071482] uhci_hcd 0000:00:1d.2: setting latency timer to 64[25526.071514] usb usb4: root hub lost power or was reset[25526.071561] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19[25526.071576] uhci_hcd 0000:00:1d.3: setting latency timer to 64[25526.071608] usb usb5: root hub lost power or was reset[25526.071637] ehci_hcd 0000:00:1d.7: PME# disabled[25526.071649] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20[25526.071663] ehci_hcd 0000:00:1d.7: setting latency timer to 64[25526.071707] pci 0000:00:1e.0: setting latency timer to 64[25526.071730] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16[25526.071743] ata_piix 0000:00:1f.1: setting latency timer to 64[25526.075381] ata6: port disabled. ignoring.[25526.075466] ahci 0000:00:1f.2: setting latency timer to 64[25526.075716] wl 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[25526.075738] wl 0000:08:00.0: setting latency timer to 64[25526.077488] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object 20090521 exoparg2-445[25526.077524] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C1F7] (Node f604bdec), AE_AML_PACKAGE_LIMIT[25526.077647] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DC.C306._STM] (Node f604ee00), AE_AML_PACKAGE_LIMIT[25526.077787] ata5: ACPI set timing mode failed (status=0x300b)[25526.094356] sky2 0000:20:00.0: PME# disabled[25526.617993] sd 0:0:0:0: [sda] Starting disk[25526.958200] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[25526.966109] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[25526.966121] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[25526.966193] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[25526.966204] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[25526.975048] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[25526.975061] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[25526.975164] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[25526.975175] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[25526.975953] ata1.00: configured for UDMA/100[25526.977697] ata1.00: configured for UDMA/100[25526.977726] ata1: EH complete[25527.092218] usb 1-6: reset high speed USB device using ehci_hcd and address 4[25527.309209] usb 4-1: reset full speed USB device using uhci_hcd and address 2[25527.451295] btusb 4-1:1.0: no reset_resume for driver btusb?[25527.451314] btusb 4-1:1.1: no reset_resume for driver btusb?[25527.701956] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[25527.701972] pci 0000:00:02.0: setting latency timer to 64[25527.704768] PM: Finishing wakeup.[25527.704778] Restarting tasks ... done.[25816.864085] usbcore: deregistering interface driver btusb[25830.049967] sky2 eth0: enabling interface[25831.714689] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both[26083.140141] usb 5-2: new low speed USB device using uhci_hcd and address 2[26083.312206] usb 5-2: New USB device found, idVendor=045e, idProduct=0040[26083.312266] usb 5-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0[26083.312317] usb 5-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)[26083.312364] usb 5-2: Manufacturer: Microsoft[26083.312922] usb 5-2: configuration #1 chosen from 1 choice[26083.332063] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input10[26083.333100] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.3-2/input0[29412.192421] npviewer.bin[12157]: segfault at ff999ea8 ip ff999ea8 sp bfdf1b7c error 14[29542.216218] npviewer.bin[12657]: segfault at ff999ea8 ip ff999ea8 sp bffbfeac error 14[55821.380964] npviewer.bin[4863]: segfault at ff999ea8 ip ff999ea8 sp bfdebe4c error 14[59541.356140] sky2 eth0: Link is down.[59560.500197] usb 5-2: USB disconnect, address 2[59598.355512] PM: Syncing filesystems ... done.[59598.521201] PM: Preparing system for mem sleep[59598.522206] Freezing user space processes ... (elapsed 0.00 seconds) done.[59598.523999] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[59598.524138] PM: Entering mem sleep[59598.524169] Suspending console(s) (use no_console_suspend to debug)[59598.524906] pci 0000:00:02.0: PCI INT A disabled[59598.559224] sd 0:0:0:0: [sda] Synchronizing SCSI cache[59598.559391] sd 0:0:0:0: [sda] Stopping disk[59599.571212] ACPI handle has no context![59599.571596] sky2 eth0: disabling interface[59599.573196] sky2 0000:20:00.0: PME# disabled[59599.584377] wl 0000:08:00.0: PCI INT A disabled[59599.617404] ata6: port disabled. ignoring.[59599.617513] ata_piix 0000:00:1f.1: PCI INT A disabled[59599.617542] ehci_hcd 0000:00:1d.7: PCI INT A disabled[59599.617559] uhci_hcd 0000:00:1d.3: PCI INT D disabled[59599.617575] uhci_hcd 0000:00:1d.2: PCI INT C disabled[59599.617590] uhci_hcd 0000:00:1d.1: PCI INT B disabled[59599.617606] uhci_hcd 0000:00:1d.0: PCI INT A disabled[59599.617646] HDA Intel 0000:00:1b.0: PCI INT A disabled[59599.628423] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3[59599.653535] ehci_hcd 0000:00:1d.7: PME# disabled[59599.664609] ACPI: Preparing to enter system sleep state S3[59599.665474] Disabling non-boot CPUs ...[59599.666747] Unmapping cpu 1 from all nodes[59599.769040] CPU 1 is now offline[59599.769048] SMP alternatives: switching to UP code[59599.777630] CPU0 attaching NULL sched-domain.[59599.777641] CPU1 attaching NULL sched-domain.[59599.777739] CPU0 attaching NULL sched-domain.[59599.778915] CPU1 is down[59599.779005] Extended CMOS year: 2000[59599.779005] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106[59599.779005] Back to C![59599.779005] microcode: CPU0 updated to revision 0x20a, date = 2008-06-04 [59599.779005] CPU0: Thermal monitoring enabled (TM1)[59599.779005] Extended CMOS year: 2000[59599.779191] Enabling non-boot CPUs ...[59599.781408] SMP alternatives: switching to SMP code[59599.788969] Booting processor 1 APIC 0x1 ip 0x6000[59599.776927] Initializing CPU#1[59599.776927] Mapping cpu 1 to node 0[59599.776927] Calibrating delay using timer specific routine.. 3192.03 BogoMIPS (lpj=1596018)[59599.776927] CPU: L1 I cache: 32K, L1 D cache: 24K[59599.776927] CPU: L2 cache: 512K[59599.776927] CPU: Physical Processor ID: 0[59599.776927] CPU: Processor Core ID: 0[59599.776927] mce: CPU supports 5 MCE banks[59599.776927] CPU1: Thermal monitoring enabled (TM1)[59599.776927] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106[59599.861136] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02[59599.861239] CPU0 attaching NULL sched-domain.[59599.861277] Switched to high resolution mode on CPU 1[59599.863206] CPU0 attaching sched-domain:[59599.863217] domain 0: span 0-1 level SIBLING[59599.863228] groups: 0 1[59599.863245] domain 1: span 0-1 level NODE[59599.863255] groups: 0-1[59599.863272] CPU1 attaching sched-domain:[59599.863281] domain 0: span 0-1 level SIBLING[59599.863291] groups: 1 0[59599.863308] domain 1: span 0-1 level NODE[59599.863318] groups: 0-1[59599.865732] microcode: CPU1 updated to revision 0x20a, date = 2008-06-04 [59599.871304] CPU1 is up[59599.871314] ACPI: Waking up from system sleep state S3[59600.102879] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[59600.102950] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xe8200000)[59600.102970] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)[59600.103040] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[59600.103083] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[59600.103103] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)[59600.103165] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)[59600.103195] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[59600.103217] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0)[59600.103242] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[59600.103265] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[59600.103353] pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x4030b)[59600.103383] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[59600.103403] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xe7f0e400)[59600.103422] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x5040)[59600.103448] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[59600.103469] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[59600.103556] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x4040a)[59600.103586] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0x40014001)[59600.103605] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xe3f0e000)[59600.103624] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020)[59600.103650] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)[59600.103671] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[59600.103743] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[59600.103775] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x6021)[59600.103806] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[59600.103840] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)[59600.103871] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x6041)[59600.103903] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[59600.103935] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)[59600.103967] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x6061)[59600.103998] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[59600.104051] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40a)[59600.104083] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x6081)[59600.104115] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)[59600.104159] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a)[59600.104199] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xe8284000)[59600.104222] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)[59600.104262] ehci_hcd 0000:00:1d.7: PME# disabled[59600.104302] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)[59600.104321] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)[59600.104352] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)[59600.104457] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10a)[59600.104488] ata_piix 0000:00:1f.1: restoring config space at offset 0x8 (was 0xc01, writing 0x60a1)[59600.104558] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xfec01000, writing 0xe8285000)[59600.104577] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0x1301, writing 0x60d1)[59600.104608] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)[59600.104722] wl 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)[59600.104783] wl 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe8000004)[59600.104804] wl 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[59600.104830] wl 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)[59600.105181] sky2 0000:20:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)[59600.105337] sky2 0000:20:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001)[59600.105398] sky2 0000:20:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xe0000004)[59600.105436] sky2 0000:20:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)[59600.105495] sky2 0000:20:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)[59600.401576] pci 0000:00:02.0: PME# disabled[59600.401592] pci 0000:00:02.1: PME# disabled[59600.401612] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21[59600.401627] HDA Intel 0000:00:1b.0: setting latency timer to 64[59600.401693] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20[59600.401708] uhci_hcd 0000:00:1d.0: setting latency timer to 64[59600.401743] usb usb2: root hub lost power or was reset[59600.401774] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21[59600.401789] uhci_hcd 0000:00:1d.1: setting latency timer to 64[59600.401821] usb usb3: root hub lost power or was reset[59600.401851] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18[59600.401865] uhci_hcd 0000:00:1d.2: setting latency timer to 64[59600.401898] usb usb4: root hub lost power or was reset[59600.401947] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19[59600.401962] uhci_hcd 0000:00:1d.3: setting latency timer to 64[59600.401994] usb usb5: root hub lost power or was reset[59600.402055] ehci_hcd 0000:00:1d.7: PME# disabled[59600.402069] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20[59600.402083] ehci_hcd 0000:00:1d.7: setting latency timer to 64[59600.402128] pci 0000:00:1e.0: setting latency timer to 64[59600.402152] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16[59600.402164] ata_piix 0000:00:1f.1: setting latency timer to 64[59600.405379] ata6: port disabled. ignoring.[59600.405465] ahci 0000:00:1f.2: setting latency timer to 64[59600.405720] wl 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[59600.405743] wl 0000:08:00.0: setting latency timer to 64[59600.405907] sky2 0000:20:00.0: PME# disabled[59600.408377] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object 20090521 exoparg2-445[59600.408418] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C1F7] (Node f604bdec), AE_AML_PACKAGE_LIMIT[59600.408542] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C002.C0DC.C306._STM] (Node f604ee00), AE_AML_PACKAGE_LIMIT[59600.408681] ata5: ACPI set timing mode failed (status=0x300b)[59600.409675] sky2 eth0: enabling interface[59600.930788] sd 0:0:0:0: [sda] Starting disk[59601.272224] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[59601.280123] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[59601.280135] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[59601.280239] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[59601.280249] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[59601.289069] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out[59601.289081] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out[59601.289142] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded[59601.289152] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out[59601.289923] ata1.00: configured for UDMA/100[59601.291730] ata1.00: configured for UDMA/100[59601.291769] ata1: EH complete[59601.405216] usb 1-6: reset high speed USB device using ehci_hcd and address 4[59601.622209] usb 4-1: reset full speed USB device using uhci_hcd and address 2[59601.761992] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16[59601.762007] pci 0000:00:02.0: setting latency timer to 64[59601.764463] PM: Finishing wakeup.[59601.764474] Restarting tasks ... done.[59850.217373] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both