rendered paste body[ 0.000000] Linux version 2.6.34 (andrea@mizar) (gcc version 4.3.3 (GCC) ) #1 Fri Jun 4 18:02:02 CEST 2010
[ 0.000000] CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), cr=0000397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: SHARP Husky
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat c0291c98, node_mem_map c02a3000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16256 pages, LIFO batch:3
[ 0.000000] Memory clock: 99.53MHz (*27)
[ 0.000000] Run Mode clock: 199.07MHz (*2)
[ 0.000000] Turbo Mode clock: 398.13MHz (*2.0, active)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: console=tty1 console=ttyS0,115200n8 debug
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Memory: 64MB = 64MB total
[ 0.000000] Memory: 62276k/62276k available, 3260k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xc4800000 - 0xe8000000 ( 568 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc007c000 ( 464 kB)
[ 0.000000] .text : 0xc007c000 - 0xc0279000 (2036 kB)
[ 0.000000] .data : 0xc027a000 - 0xc02922c0 ( 97 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:288
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 4.465717] Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560)
[ 4.684946] Mount-cache hash table entries: 512
[ 4.685962] CPU: Testing write buffer coherency: ok
[ 4.687632] devtmpfs: initialized
[ 4.702539] Sharp Scoop Device found at 0x10800000 -> 0xc4814000
[ 4.709476] bio: create slab <bio-0> at 0
[ 4.716713] I2C: i2c-0: PXA I2C adapter
[ 4.718748] Switching to clocksource oscr0
[ 4.725434] Switched to NOHz mode on CPU #0
[ 4.963594] JFFS2 version 2.2. (NAND) (SUMMARY) 2001-2006 Red Hat, Inc.
[ 4.966666] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 4.966819] io scheduler noop registered
[ 4.966868] io scheduler deadline registered (default)
[ 4.999949] Found w100 at 0x08000000.
[ 5.240478] Console: switching to colour frame buffer device 80x30
[ 5.292906] fb0: w100fb frame buffer device
[ 5.345059] pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
[ 5.685218] console [ttyS0] enabled
[ 5.690655] pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
[ 5.701947] pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
[ 5.736043] loop: module loaded
[ 5.740249] Uniform Multi-Platform E-IDE driver
[ 5.746360] ide-gd driver 1.18
[ 5.757363] physmap platform flash device: 00800000 at 00000000
[ 5.765379] RedBoot partition parsing not available
[ 5.771819] Using physmap partition information
[ 5.777488] Creating 1 MTD partitions on "physmap-flash":
[ 5.784270] 0x000000120000-0x000000800000 : "Boot PROM Filesystem"
[ 5.798700] NAND device: Manufacturer ID: 0xec, Chip ID: 0x79 (Samsung NAND 128MiB 3,3V 8-bit)
[ 5.809809] Scanning device for bad blocks
[ 5.816073] Bad eraseblock 32 at 0x000000080000
[ 5.867888] Bad eraseblock 1440 at 0x000001680000
[ 6.092511] Creating 3 MTD partitions on "sharpsl-nand":
[ 6.099330] 0x000000000000-0x000000700000 : "System Area"
[ 6.112599] 0x000000700000-0x000003c00000 : "Root Filesystem"
[ 6.129530] 0x000003c00000-0x000008000000 : "Home Filesystem"
[ 6.148118] mice: PS/2 mouse device common for all mice
[ 6.158436] input: matrix-keypad as /devices/platform/matrix-keypad/input/input0
[ 6.173586] ads7846 spi1.0: touchscreen, irq 101
[ 6.181339] input: ADS7846 Touchscreen as /devices/platform/pxa2xx-spi.1/spi1.0/input/input1
[ 6.195788] APM Battery Driver
[ 6.206483] Registered led device: corgi:amber:charge
[ 6.215678] Registered led device: corgi:green:mail
[ 6.222309] XScale DSP coprocessor detected.
[ 6.236740] Freeing init memory: 464K
kexecboot 0.5 starting
I'm the init-process!
Unknown keyword: 'DEBUG'
Can't parse keyword debug!
FB angle is 0, tty is /dev/tty1
Start: 60004, End: 24
Offset: 664004
Total MTD size: 8000000
SMF offset: 700000
Root offset: 3C00000
Root[2] offset: 3C00000
Home size: 4400000
Got device '/dev/mtdblock0' (31, 0) of size 6Mb
Probing /dev/mtdblock0
FS could not be identified
Can't detect FS type
Got device '/dev/mtdblock1' (31, 1) of size 7Mb
Probing /dev/mtdblock1
FS could not be identified
Can't detect FS type
Got device '/dev/mtdblock2' (31, 2) of size 53Mb
Probing /dev/mtdblock2
FS could not be identified
Can't detect FS type
Got device '/dev/mtdblock3' (31, 3) of size 68Mb
Probing /dev/mtdblock3
FS could not be identified
Can't detect FS type
Can't read next device line
Found 0 items
Can't allocate markers array
+ found evdev: event0
Supported event types:
Event type 0x00 (Unknown event type: 0x0000)
Event type 0x01 (Keys or Buttons)
Event type 0x04 (Something miscellaneous)
Event type 0x14 (Repeat)
+ found evdev: event6
Can't open evdev device '/dev/event6'+ found evdev: event7
Can't open evdev device '/dev/event7'+ found evdev: event5
Can't open evdev device '/dev/event5'+ found evdev: event2
Can't open evdev device '/dev/event2'+ found evdev: event1
Supported event types:
Event type 0x00 (Unknown event type: 0x0000)
Event type 0x01 (Keys or Buttons)
Event type 0x03 (Absolute Axes)
+ found evdev: event4
Can't open evdev device '/dev/event4'+ found evdev: event3
Can't open evdev device '/dev/event3'+ opened event device '/dev/event0', fd: 7
+ opened event device '/dev/event1', fd: 8