[root@asterisk1 asterisk]# cat zapata-auto.conf
; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;
; Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
signalling=fxo_ks
; Note: this is an extension. Create a ZAP extension in AMP for Channel 1
context=from-internal
group=1
channel => 1
signalling=fxo_ks
; Note: this is an extension. Create a ZAP extension in AMP for Channel 2
context=from-internal
group=1
channel => 2
signalling=fxs_ks
; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 3
context=from-pstn
group=0
channel => 3
signalling=fxs_ks
; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 4
context=from-pstn
group=0
channel => 4
[root@asterisk1 asterisk]# cat zapata_additional.conf
;;;;;;[200]
signalling=fxo_ks
record_out=On-Demand
record_in=On-Demand
mailbox=200@default
echotraining=800
echocancelwhenbridge=no
echocancel=yes
context=from-internal
callprogress=no
callerid="Josh Quintus" <200>
busydetect=no
busycount=7
channel=>1
;;;;;;[201]
signalling=fxo_ks
record_out=On-Demand
record_in=On-Demand
mailbox=201@default
echotraining=800
echocancelwhenbridge=no
echocancel=yes
context=from-internal
callprogress=no
callerid="Test Phone" <201>
busydetect=no
busycount=7
channel=>2
[root@asterisk1 asterisk]# cat zapata.conf
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include AMP configs
#include zapata_additional.conf
;Include genzaptelconf configs
#include zapata-auto.conf