rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.12-0.1-default (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP 2010-01-27 08:20:11 +0100
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004ffae000 (usable)
[ 0.000000] BIOS-e820: 000000004ffae000 - 0000000050000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x4ffae max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FF0000000 write-back
[ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 write-through
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000004ffae000 (usable)
[ 0.000000] modified: 000000004ffae000 - 0000000050000000 (reserved)
[ 0.000000] modified: 00000000feda0000 - 00000000fee00000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 378e5000 - 37fefe3f
[ 0.000000] Allocated new RAMDISK: 00a1d000 - 01127e3f
[ 0.000000] Move RAMDISK from 00000000378e5000 - 0000000037fefe3e to 00a1d000 - 01127e3e
[ 0.000000] ACPI: RSDP 000fdf00 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 4fff0000 00028 (v01 DELL CPi R 27D3091E ASL 00000061)
[ 0.000000] ACPI: FACP 4fff0400 00074 (v01 DELL CPi R 27D3091E ASL 00000061)
[ 0.000000] ACPI: DSDT 4fff0c00 02CF6 (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 4ffff800 00040
[ 0.000000] 395MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000200000 - 0000a183a8] TEXT DATA BSS ==> [0000200000 - 0000a183a8]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [0000a19000 - 0000a1c1a4] BRK ==> [0000a19000 - 0000a1c1a4]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000a1d000 - 0001127e3f] NEW RAMDISK ==> [0000a1d000 - 0001127e3f]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0004ffae
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0004ffae
[ 0.000000] On node 0 totalpages: 327497
[ 0.000000] free_area_init_node: node 0, pgdat c08a1040, node_mem_map c1128000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 792 pages used for memmap
[ 0.000000] HighMem zone: 100504 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:aeda0000)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1b2d000, static data 33148 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 324937
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-Hitachi_HTS541040G9AT00_MPB2PAXHC9V4ZM-part7 resume=/dev/disk/by-id/ata-Hitachi_HTS541040G9AT00_MPB2PAXHC9V4ZM-part5 splash=silent quiet showopts vga=0x31a
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0004ffae)
[ 0.000000] Memory: 1282508k/1310392k available (4132k kernel code, 26660k reserved, 2701k data, 460k init, 405184k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd34000 - 0xfffff000 (2860 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc08ad000 - 0xc0920000 ( 460 kB)
[ 0.000000] .data : 0xc06091b6 - 0xc08ac768 (2701 kB)
[ 0.000000] .text : 0xc0200000 - 0xc06091b6 (4132 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1398.746 MHz processor.
[ 0.000108] Console: colour dummy device 80x25
[ 0.000116] console [tty0] enabled
[ 0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 2797.49 BogoMIPS (lpj=5594984)
[ 0.004897] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[ 0.005022] Security Framework initialized
[ 0.005063] AppArmor: AppArmor initialized
[ 0.005094] Mount-cache hash table entries: 512
[ 0.005321] Initializing cgroup subsys ns
[ 0.005330] Initializing cgroup subsys cpuacct
[ 0.005336] Initializing cgroup subsys memory
[ 0.005348] Initializing cgroup subsys devices
[ 0.005352] Initializing cgroup subsys freezer
[ 0.005356] Initializing cgroup subsys net_cls
[ 0.005393] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.005398] CPU: L2 cache: 1024K
[ 0.005405] mce: CPU supports 5 MCE banks
[ 0.005417] ------------[ cut here ]------------
[ 0.005434] WARNING: at /usr/src/packages/BUILD/kernel-default-2.6.31.12/linux-2.6.31/arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x53/0x70()
[ 0.005440] Hardware name: Inspiron 8600
[ 0.005444] Modules linked in:
[ 0.005451] Pid: 0, comm: swapper Not tainted 2.6.31.12-0.1-default #1
[ 0.005455] Call Trace:
[ 0.005483] [<c02082aa>] try_stack_unwind+0x17a/0x1a0
[ 0.005493] [<c020706c>] dump_trace+0x6c/0x130
[ 0.005502] [<c0207e58>] show_trace_log_lvl+0x58/0x80
[ 0.005510] [<c0207ea6>] show_trace+0x26/0x40
[ 0.005520] [<c060035f>] dump_stack+0x79/0x91
[ 0.005530] [<c024f238>] warn_slowpath_common+0x78/0xc0
[ 0.005539] [<c024f2a1>] warn_slowpath_null+0x21/0x40
[ 0.005547] [<c021d883>] native_apic_write_dummy+0x53/0x70
[ 0.005556] [<c0216dcb>] intel_init_thermal+0x7b/0x220
[ 0.005565] [<c0216177>] mce_intel_feature_init+0x17/0x70
[ 0.005576] [<c0213a3f>] mce_cpu_features+0x1f/0x60
[ 0.005584] [<c05fc108>] mcheck_init+0x155/0x1a5
[ 0.005598] [<c05f9d72>] identify_cpu+0x239/0x248
[ 0.005608] [<c08b514d>] identify_boot_cpu+0xd/0x23
[ 0.005617] [<c08b5343>] check_bugs+0x16/0x139
[ 0.005628] [<c08adcb1>] start_kernel+0x35a/0x37b
[ 0.005637] [<c08ad087>] i386_start_kernel+0x87/0x9f
[ 0.005654] ---[ end trace a7919e7f17c0a725 ]---
[ 0.005660] CPU0: Thermal monitoring enabled (TM1)
[ 0.005678] Performance Counters:
[ 0.005682] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.005686] no hardware sampling interrupt available.
[ 0.005689] p6 PMU driver.
[ 0.005699] ... version: 0
[ 0.005702] ... bit width: 32
[ 0.005705] ... generic counters: 2
[ 0.005708] ... value mask: 00000000ffffffff
[ 0.005712] ... max period: 000000007fffffff
[ 0.005715] ... fixed-purpose counters: 0
[ 0.005718] ... counter mask: 0000000000000003
[ 0.005733] Checking 'hlt' instruction... OK.
[ 0.020818] SMP alternatives: switching to UP code
[ 0.027888] Freeing SMP alternatives: 15k freed
[ 0.027901] ACPI: Core revision 20090521
[ 0.034622] ACPI: setting ELCR to 0200 (from 0800)
[ 0.036100] weird, boot CPU (#0) not listed by the BIOS.
[ 0.036104] SMP motherboard not detected.
[ 0.036108] Local APIC not detected. Using dummy APIC emulation.
[ 0.036111] SMP disabled
[ 0.036305] Brought up 1 CPUs
[ 0.036310] Total of 1 processors activated (2797.49 BogoMIPS).
[ 0.036327] CPU0 attaching NULL sched-domain.
[ 0.036513] tmpfs: No value for mount option 'mode'
[ 0.036527] devtmpfs: initialized
[ 0.036760] Booting paravirtualized kernel on bare hardware
[ 0.037155] regulator: core version 0.5
[ 0.037181] Time: 15:25:45 Date: 04/14/10
[ 0.037281] NET: Registered protocol family 16
[ 0.037447] ACPI: bus type pci registered
[ 0.072119] PCI: PCI BIOS revision 2.10 entry at 0xfc97e, last bus=2
[ 0.072123] PCI: Using configuration type 1 for base access
[ 0.073220] bio: create slab <bio-0> at 0
[ 0.074298] ACPI: EC: Look up EC in DSDT
[ 0.088687] ACPI: Interpreter enabled
[ 0.088708] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.088749] ACPI: Using PIC for interrupt routing
[ 0.114545] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.122090] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.122157] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
[ 0.122291] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
[ 0.122351] pci 0000:00:1d.1: reg 20 io port: [0xbf40-0xbf5f]
[ 0.122410] pci 0000:00:1d.2: reg 20 io port: [0xbf20-0xbf3f]
[ 0.122477] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4fffc00-0xf4ffffff]
[ 0.122540] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.122548] pci 0000:00:1d.7: PME# disabled
[ 0.122652] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.122658] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
[ 0.122687] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.122696] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.122705] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.122714] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.122723] pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf]
[ 0.122733] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.122782] pci 0000:00:1f.5: reg 10 io port: [0xb800-0xb8ff]
[ 0.122790] pci 0000:00:1f.5: reg 14 io port: [0xbc40-0xbc7f]
[ 0.122799] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf4fff800-0xf4fff9ff]
[ 0.122808] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf4fff400-0xf4fff4ff]
[ 0.122842] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.122848] pci 0000:00:1f.5: PME# disabled
[ 0.122893] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
[ 0.122901] pci 0000:01:00.0: reg 14 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.122922] pci 0000:01:00.0: reg 30 32bit mmio: [0x80000000-0x8001ffff]
[ 0.122981] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.122986] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
[ 0.122992] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.123030] pci 0000:02:00.0: reg 10 32bit mmio: [0xfaffe000-0xfaffffff]
[ 0.123075] pci 0000:02:00.0: supports D1 D2
[ 0.123079] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.123085] pci 0000:02:00.0: PME# disabled
[ 0.123123] pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.123145] pci 0000:02:01.0: supports D1 D2
[ 0.123149] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.123155] pci 0000:02:01.0: PME# disabled
[ 0.123192] pci 0000:02:01.1: reg 10 32bit mmio: [0xfaffd800-0xfaffdfff]
[ 0.123201] pci 0000:02:01.1: reg 14 32bit mmio: [0xfaff8000-0xfaffbfff]
[ 0.123246] pci 0000:02:01.1: supports D1 D2
[ 0.123250] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot
[ 0.123256] pci 0000:02:01.1: PME# disabled
[ 0.123308] pci 0000:00:1e.0: transparent bridge
[ 0.123315] pci 0000:00:1e.0: bridge io port: [0xd000-0xefff]
[ 0.123321] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6000000-0xfbffffff]
[ 0.123354] pci_bus 0000:00: on NUMA node 0
[ 0.123362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.123722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.123815] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.141058] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.141262] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
[ 0.141462] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[ 0.141662] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[ 0.141833] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.142042] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.142344] SCSI subsystem initialized
[ 0.142484] usbcore: registered new interface driver usbfs
[ 0.142509] usbcore: registered new interface driver hub
[ 0.142553] usbcore: registered new device driver usb
[ 0.142630] PCI: Using ACPI for IRQ routing
[ 0.144499] AppArmor: AppArmor Filesystem Enabled
[ 0.144524] pnp: PnP ACPI init
[ 0.144547] ACPI: bus type pnp registered
[ 0.159629] pnp 00:02: io resource (0x800-0x805) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.159636] pnp 00:02: io resource (0x808-0x80f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.159747] pnp 00:03: io resource (0x806-0x807) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.159754] pnp 00:03: io resource (0x810-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.159760] pnp 00:03: io resource (0x860-0x87f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.186748] pnp: PnP ACPI: found 13 devices
[ 0.186753] ACPI: ACPI bus type pnp unregistered
[ 0.186760] PnPBIOS: Disabled by ACPI PNP
[ 0.186782] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 0.186788] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 0.186793] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 0.186798] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.186804] system 00:00: iomem range 0x100000-0x4ffeffff could not be reserved
[ 0.186809] system 00:00: iomem range 0x4fff0000-0x4fffffff has been reserved
[ 0.186815] system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved
[ 0.186820] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.186830] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.186840] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 0.186845] system 00:03: ioport range 0x880-0x8bf has been reserved
[ 0.186850] system 00:03: ioport range 0x8c0-0x8df has been reserved
[ 0.186855] system 00:03: ioport range 0x8e0-0x8ff has been reserved
[ 0.186866] system 00:08: ioport range 0x900-0x97f has been reserved
[ 0.221732] pci 0000:01:00.0: BAR 6: no parent found for of device [0x80000000-0x8001ffff]
[ 0.221774] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.221779] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.221786] pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff
[ 0.221792] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xdfffffff
[ 0.221804] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
[ 0.221808] pci 0000:02:01.0: IO window: 0x00d000-0x00d0ff
[ 0.221814] pci 0000:02:01.0: IO window: 0x00d400-0x00d4ff
[ 0.221820] pci 0000:02:01.0: PREFETCH window: 0x50000000-0x53ffffff
[ 0.221827] pci 0000:02:01.0: MEM window: 0x58000000-0x5bffffff
[ 0.221833] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.221838] pci 0000:00:1e.0: IO window: 0xd000-0xefff
[ 0.221846] pci 0000:00:1e.0: MEM window: 0xf6000000-0xfbffffff
[ 0.221852] pci 0000:00:1e.0: PREFETCH window: 0x50000000-0x53ffffff
[ 0.221873] pci 0000:00:1e.0: setting latency timer to 64
[ 0.221883] pci 0000:02:01.0: enabling device (0000 -> 0003)
[ 0.222178] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.222183] PCI: setting IRQ 11 as level-triggered
[ 0.222190] pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.222201] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.222205] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.222210] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.222215] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff]
[ 0.222220] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.222225] pci_bus 0000:02: resource 0 io: [0xd000-0xefff]
[ 0.222229] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xfbffffff]
[ 0.222234] pci_bus 0000:02: resource 2 pref mem [0x50000000-0x53ffffff]
[ 0.222239] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.222243] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.222248] pci_bus 0000:03: resource 0 io: [0xd000-0xd0ff]
[ 0.222252] pci_bus 0000:03: resource 1 io: [0xd400-0xd4ff]
[ 0.222257] pci_bus 0000:03: resource 2 pref mem [0x50000000-0x53ffffff]
[ 0.222262] pci_bus 0000:03: resource 3 mem: [0x58000000-0x5bffffff]
[ 0.222360] NET: Registered protocol family 2
[ 0.222537] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.223156] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.224683] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.225672] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.225678] TCP reno registered
[ 0.225933] NET: Registered protocol family 1
[ 0.226050] Unpacking initramfs...
[ 0.501366] Freeing initrd memory: 7211k freed
[ 0.511985] Scanning for low memory corruption every 60 seconds
[ 0.512333] audit: initializing netlink socket (disabled)
[ 0.512378] type=2000 audit(1271258745.512:1): initialized
[ 0.523331] highmem bounce pool size: 64 pages
[ 0.523342] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.523500] VFS: Disk quotas dquot_6.5.2
[ 0.523563] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.523782] msgmni has been set to 432
[ 0.523951] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.523957] io scheduler noop registered
[ 0.523961] io scheduler anticipatory registered
[ 0.523964] io scheduler deadline registered
[ 0.523993] io scheduler cfq registered (default)
[ 0.524213] pci 0000:01:00.0: Boot video device
[ 0.524363] pci-stub: invalid id string ""
[ 0.524526] vesafb: framebuffer at 0xd0000000, mapped to 0xf7c80000, using 6144k, total 32768k
[ 0.524532] vesafb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.524536] vesafb: protected mode interface info at c000:e3c0
[ 0.524540] vesafb: pmi: set display start = c00ce3f6, set palette = c00ce460
[ 0.524543] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 0.524564] vesafb: scrolling: redraw
[ 0.524569] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.525197] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.547761] bootsplash: silentjpeg size 100573 bytes
[ 0.577507] bootsplash: ...found (1024x768, 27393 bytes, v3).
[ 0.685627] Console: switching to colour frame buffer device 124x44
[ 0.724083] Switched to high resolution mode on CPU 0
[ 0.793647] fb0: VESA VGA frame buffer device
[ 0.793776] isapnp: Scanning for PnP cards...
[ 1.103143] isapnp: No Plug & Play device found
[ 1.105332] Non-volatile memory driver v1.3
[ 1.105337] Linux agpgart interface v0.103
[ 1.105382] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.105488] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.106179] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.106401] Fixed MDIO Bus: probed
[ 1.106477] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.111949] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.111959] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.112078] mice: PS/2 mouse device common for all mice
[ 1.112258] cpuidle: using governor ladder
[ 1.112262] cpuidle: using governor menu
[ 1.208820] TCP cubic registered
[ 1.208865] Using IPI No-Shortcut mode
[ 1.208991] PM: Checking image partition /dev/disk/by-id/ata-Hitachi_HTS541040G9AT00_MPB2PAXHC9V4ZM-part5
[ 1.210971] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.808417] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input1
[ 1.829987] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input2
[ 1.834330] PM: Resume from disk failed.
[ 1.834349] registered taskstats version 1
[ 1.834495] Magic number: 6:5:437
[ 1.834695] Freeing unused kernel memory: 460k freed
[ 1.835101] Write protecting the kernel text: 4136k
[ 1.835203] Write protecting the kernel read-only data: 2484k
[ 1.889680] Marking TSC unstable due to TSC halts in idle
[ 1.889780] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 1.889826] processor LNXCPU:00: registered as cooling_device0
[ 1.889832] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.899796] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.899819] ACPI: Thermal Zone [THM] (54 C)
[ 1.911483] udev: starting version 146
[ 1.945787] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.081520] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 2.081531] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 2.081562] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.081568] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.081620] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.085552] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.085561] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.085576] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00
[ 2.142646] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.142719] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.142725] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.142730] usb usb1: Product: EHCI Host Controller
[ 2.142733] usb usb1: Manufacturer: Linux 2.6.31.12-0.1-default ehci_hcd
[ 2.142737] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.142894] usb usb1: configuration #1 chosen from 1 choice
[ 2.142943] hub 1-0:1.0: USB hub found
[ 2.142959] hub 1-0:1.0: 6 ports detected
[ 2.150665] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.150690] rtc0: alarms up to one day, 114 bytes nvram
[ 2.151748] libata version 3.00 loaded.
[ 2.160159] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.162965] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 2.162975] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.162991] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.162997] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.163021] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.163055] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
[ 2.163124] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.163129] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.163133] usb usb2: Product: UHCI Host Controller
[ 2.163137] usb usb2: Manufacturer: Linux 2.6.31.12-0.1-default uhci_hcd
[ 2.163141] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.163311] usb usb2: configuration #1 chosen from 1 choice
[ 2.163360] hub 2-0:1.0: USB hub found
[ 2.163372] hub 2-0:1.0: 2 ports detected
[ 2.163450] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 2.163458] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.163464] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.163475] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.163499] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
[ 2.163563] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.163568] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.163572] usb usb3: Product: UHCI Host Controller
[ 2.163576] usb usb3: Manufacturer: Linux 2.6.31.12-0.1-default uhci_hcd
[ 2.163580] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.163676] usb usb3: configuration #1 chosen from 1 choice
[ 2.163717] hub 3-0:1.0: USB hub found
[ 2.163728] hub 3-0:1.0: 2 ports detected
[ 2.164366] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 2.164373] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 2.164383] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.164388] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.164404] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.164430] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
[ 2.164484] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.164488] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.164493] usb usb4: Product: UHCI Host Controller
[ 2.164497] usb usb4: Manufacturer: Linux 2.6.31.12-0.1-default uhci_hcd
[ 2.164501] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.164610] usb usb4: configuration #1 chosen from 1 choice
[ 2.164653] hub 4-0:1.0: USB hub found
[ 2.164663] hub 4-0:1.0: 2 ports detected
[ 2.192743] ata_piix 0000:00:1f.1: version 2.13
[ 2.192766] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 2.192778] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.192841] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.193182] scsi0 : ata_piix
[ 2.193395] scsi1 : ata_piix
[ 2.194776] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 2.194782] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 2.348180] ata1: clearing spurious IRQ
[ 2.348370] ata2: clearing spurious IRQ
[ 2.356673] ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4241N, A101, max UDMA/33
[ 2.356805] ata2: clearing spurious IRQ
[ 2.356890] ata1.00: ATA-6: Hitachi HTS541040G9AT00, MB2OA61A, max UDMA/100
[ 2.356895] ata1.00: 78140160 sectors, multi 8: LBA
[ 2.357014] ata1: clearing spurious IRQ
[ 2.364176] ata1: clearing spurious IRQ
[ 2.364311] ata2: clearing spurious IRQ
[ 2.372468] ata2.00: configured for UDMA/33
[ 2.372684] ata1.00: configured for UDMA/100
[ 2.372862] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54104 MB2O PQ: 0 ANSI: 5
[ 2.373309] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 2.373385] sd 0:0:0:0: [sda] Write Protect is off
[ 2.373390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.373429] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.373654] sda:
[ 2.378801] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4241N A101 PQ: 0 ANSI: 5
[ 2.389968] sda2 < sda5 sda6 sda7 sda8 >
[ 2.431432] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.836223] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
[ 2.836231] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2.836237] PM: Basic memory bitmaps created
[ 2.852186] PM: Basic memory bitmaps freed
[ 2.864390] PM: Starting manual resume from disk
[ 2.864396] PM: Resume from partition 8:5
[ 2.864399] PM: Checking hibernation image.
[ 2.864671] PM: Resume from disk failed.
[ 2.872097] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 3.005679] EXT4-fs (sda7): barriers enabled
[ 3.022715] kjournald2 starting: pid 232, dev sda7:8, commit interval 5 seconds
[ 3.023315] EXT4-fs (sda7): internal journal on sda7:8
[ 3.023322] EXT4-fs (sda7): delayed allocation enabled
[ 3.023327] EXT4-fs: file extents enabled
[ 3.023445] EXT4-fs: mballoc enabled
[ 3.023469] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 3.078160] usb 2-1: New USB device found, idVendor=03f0, idProduct=4f11
[ 3.078166] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.078171] usb 2-1: Product: Officejet 5600 series
[ 3.078175] usb 2-1: Manufacturer: HP
[ 3.078178] usb 2-1: SerialNumber: CN78PF305W04CY
[ 3.078355] usb 2-1: configuration #1 chosen from 1 choice
[ 5.273433] preloadtrace: systemtap: 0.9.9/0.142, base: f8505000, memory: 34544+77420+11080+13600 data+text+ctx+net, probes: 34
[ 7.468666] udev: starting version 146
[ 7.511020] ACPI: AC Adapter [AC] (on-line)
[ 7.537833] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.545610] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[ 7.554598] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 7.561564] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 7.600522] ACPI: Lid Switch [LID]
[ 7.692611] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.704944] intel_rng: FWH not detected
[ 7.756096] iTCO_vendor_support: vendor-support=0
[ 7.803791] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.803848] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.822778] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 7.878829] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 7.887764] ACPI: Battery Slot [BAT0] (battery present)
[ 7.887984] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 7.888100] ACPI: Power Button [PBTN]
[ 7.888187] ACPI: Battery Slot [BAT1] (battery absent)
[ 7.888351] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 7.888393] ACPI: Sleep Button [SBTN]
[ 7.965194] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 7.965295] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0860)
[ 7.965392] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.983067] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/device:1f/input/input7
[ 7.983166] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 7.993428] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 7.993437] Uniform CD-ROM driver Revision: 3.20
[ 7.993603] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 8.039117] parport_pc 00:0c: reported by Plug and Play ACPI
[ 8.039167] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 8.058257] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:016a]
[ 8.058279] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
[ 8.058284] yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
[ 8.058291] yenta_cardbus 0000:02:01.0: TI: mfunc 0x012c1202, devctl 0x64
[ 8.152771] ppdev: user-space parallel port driver
[ 8.180402] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 8.180409] PCI: setting IRQ 5 as level-triggered
[ 8.180417] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 8.180483] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 8.292571] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0458, PCI irq 11
[ 8.292579] yenta_cardbus 0000:02:01.0: Socket status: 30000020
[ 8.292586] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 8.292599] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
[ 8.292605] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xefff: clean.
[ 8.293222] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
[ 8.293227] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 8.548263] ohci1394 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 8.554959] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 8.556001] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 8.556726] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 8.556817] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 8.557468] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 8.604081] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[faffd800-faffdfff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 8.604868] b44 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 8.664293] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[ 8.664331] b44.c:v2.0
[ 8.684756] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0d:56:aa:1d:ba
[ 9.008048] intel8x0_measure_ac97_clock: measured 55335 usecs (2666 samples)
[ 9.008055] intel8x0: clocking to 48000
[ 9.091515] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4F11
[ 9.091549] usbcore: registered new interface driver usblp
[ 9.184059] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 9.184134] pci 0000:03:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 9.221986] cfg80211: Calling CRDA to update world regulatory domain
[ 9.278523] ath5k 0000:03:00.0: enabling device (0000 -> 0002)
[ 9.278544] ath5k 0000:03:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 9.278610] ath5k 0000:03:00.0: registered as 'phy0'
[ 9.867031] ath: EEPROM regdomain: 0x10
[ 9.867034] ath: EEPROM indicates we should expect a direct regpair map
[ 9.867040] ath: Country alpha2 being used: CO
[ 9.867043] ath: Regpair used: 0x10
[ 10.010060] phy0: Selected rate control algorithm 'minstrel'
[ 10.010815] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[ 10.011517] cfg80211: Calling CRDA for country: CO
[ 10.144236] ieee1394: Host added: ID:BUS[0-00:1023] GUID[474fc000024de861]
[ 10.332727] NET: Registered protocol family 10
[ 10.333654] lo: Disabled Privacy Extensions
[ 10.411243] Adding 1132540k swap on /dev/sda5. Priority:-1 extents:1 across:1132540k
[ 11.083547] device-mapper: uevent: version 1.0.3
[ 11.091038] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 11.734170] loop: module loaded
[ 11.805175] EXT4-fs (sda6): barriers enabled
[ 11.811994] kjournald2 starting: pid 662, dev sda6:8, commit interval 5 seconds
[ 11.812410] EXT4-fs (sda6): internal journal on sda6:8
[ 11.812416] EXT4-fs (sda6): delayed allocation enabled
[ 11.812519] EXT4-fs: mballoc enabled
[ 11.812543] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 12.216300] fuse init (API version 7.12)
[ 14.035408] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.235869] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.294670] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 21.768389] powernow: This module only works with AMD K7 CPUs
[ 22.220027] Clocksource tsc unstable (delta = -159992219 ns)
[ 25.829598] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 32.005125] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.107583] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 32.160783] NET: Registered protocol family 17
[ 37.763501] bootsplash: status on console 0 changed to on
[ 39.107457] wlan0: authenticate with AP 00:22:a4:45:ab:89
[ 39.109466] wlan0: authenticated
[ 39.109470] wlan0: associate with AP 00:22:a4:45:ab:89
[ 39.113683] wlan0: RX AssocResp from 00:22:a4:45:ab:89 (capab=0x431 status=0 aid=1)
[ 39.113689] wlan0: associated
[ 39.114663] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 39.152091] cfg80211: Calling CRDA for country: US
[ 41.140497] martian source 255.255.255.255 from 192.168.1.254, on dev wlan0
[ 41.140524] ll header: ff:ff:ff:ff:ff:ff:00:22:a4:45:ab:89:08:00
[ 48.528345] RPC: Registered udp transport module.
[ 48.528357] RPC: Registered tcp transport module.
[ 48.556437] Slow work thread pool: Starting up
[ 48.556990] Slow work thread pool: Ready
[ 48.557129] FS-Cache: Loaded
[ 48.602648] FS-Cache: Netfs 'nfs' registered for caching
[ 49.364041] wlan0: no IPv6 routers present
[ 210.085210] usblp0: removed
[ 346.872114] usb 2-1: USB disconnect, address 2
[ 348.672073] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 348.868339] usb 2-1: New USB device found, idVendor=03f0, idProduct=4f11
[ 348.868376] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 348.868403] usb 2-1: Product: Officejet 5600 series
[ 348.868423] usb 2-1: Manufacturer: HP
[ 348.868441] usb 2-1: SerialNumber: CN78PF305W04CY
[ 348.868753] usb 2-1: configuration #1 chosen from 1 choice
[ 348.875534] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4F11
[ 351.336114] usb 2-1: USB disconnect, address 3
[ 351.336707] usblp0: removed
[ 352.270361] lp0: using parport0 (interrupt-driven).
[ 355.400085] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 355.604140] usb 3-1: New USB device found, idVendor=03f0, idProduct=4f11
[ 355.604167] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 355.604179] usb 3-1: Product: Officejet 5600 series
[ 355.604188] usb 3-1: Manufacturer: HP
[ 355.604195] usb 3-1: SerialNumber: CN78PF305W04CY
[ 355.604410] usb 3-1: configuration #1 chosen from 1 choice
[ 355.611291] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4F11
[ 358.589454] usblp0: removed
[ 514.561478] usb 3-1: usbfs: process 7025 (hp) did not claim interface 0 before use
[ 514.768100] usb 3-1: USB disconnect, address 2
[ 2551.799087] EXT4-fs (sda8): barriers enabled
[ 2551.815711] kjournald2 starting: pid 11186, dev sda8:8, commit interval 5 seconds
[ 2551.816158] EXT4-fs (sda8): internal journal on sda8:8
[ 2551.816173] EXT4-fs (sda8): delayed allocation enabled
[ 2551.816184] EXT4-fs: file extents enabled
[ 2551.816291] EXT4-fs: mballoc enabled
[ 2551.816324] EXT4-fs (sda8): mounted filesystem with ordered data mode
[ 2955.276980] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33603 DF PROTO=TCP SPT=50552 DPT=80 WINDOW=885 RES=0x00 ACK FIN URGP=0 OPT (0101080A000A210B052E80A5)
[ 2955.948050] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33604 DF PROTO=TCP SPT=50552 DPT=80 WINDOW=885 RES=0x00 ACK FIN URGP=0 OPT (0101080A000A21B3052E80A5)
[ 2957.292073] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33605 DF PROTO=TCP SPT=50552 DPT=80 WINDOW=885 RES=0x00 ACK FIN URGP=0 OPT (0101080A000A2303052E80A5)
[ 2959.980074] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33606 DF PROTO=TCP SPT=50552 DPT=80 WINDOW=885 RES=0x00 ACK FIN URGP=0 OPT (0101080A000A25A3052E80A5)
[ 2965.356261] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33607 DF PROTO=TCP SPT=50552 DPT=80 WINDOW=885 RES=0x00 ACK FIN URGP=0 OPT (0101080A000A2AE3052E80A5)
[ 2976.108252] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33608 DF PROTO=TCP SPT=50552 DPT=80 WINDOW=885 RES=0x00 ACK FIN URGP=0 OPT (0101080A000A3563052E80A5)
[ 2997.612098] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33609 DF PROTO=TCP SPT=50552 DPT=80 WINDOW=885 RES=0x00 ACK FIN URGP=0 OPT (0101080A000A4A63052E80A5)
[ 3040.620084] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33610 DF PROTO=TCP SPT=50552 DPT=80 WINDOW=885 RES=0x00 ACK FIN URGP=0 OPT (0101080A000A7463052E80A5)
[ 3126.636255] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33611 DF PROTO=TCP SPT=50552 DPT=80 WINDOW=885 RES=0x00 ACK FIN URGP=0 OPT (0101080A000AC863052E80A5)
[ 3253.048079] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=216.196.97.140 LEN=58 TOS=0x00 PREC=0x00 TTL=64 ID=20576 DF PROTO=TCP SPT=57237 DPT=119 WINDOW=5535 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A000B43D600FA1A85)
[ 3336.760094] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=216.196.97.140 LEN=58 TOS=0x00 PREC=0x00 TTL=64 ID=20577 DF PROTO=TCP SPT=57237 DPT=119 WINDOW=5535 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A000B959600FA1A85)
[12318.177392] ath5k phy0: unsupported jumbo
[16765.556850] b44: eth0: powering down PHY
[16765.777490] wlan0: disassociating by local choice (reason=3)
[16765.906355] wlan0: deauthenticating by local choice (reason=3)
[16766.031760] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[16766.320461] ath5k 0000:03:00.0: PCI INT A disabled
[16768.536514] PM: Syncing filesystems ... done.
[16768.789657] PM: Preparing system for mem sleep
[16768.790224] Freezing user space processes ... (elapsed 0.00 seconds) done.
[16768.791891] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[16768.791972] PM: Entering mem sleep
[16768.791999] Suspending console(s) (use no_console_suspend to debug)
[16768.792294] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[16768.853315] sd 0:0:0:0: [sda] Stopping disk
[16769.850121] parport_pc 00:0c: disabled
[16769.851688] serial 00:0b: disabled
[16769.864089] b44 0000:02:00.0: PCI INT A disabled
[16769.864096] ACPI handle has no context!
[16769.880428] Intel ICH 0000:00:1f.5: PCI INT B disabled
[16769.880592] ata_piix 0000:00:1f.1: PCI INT A disabled
[16769.880606] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[16769.880616] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[16769.880625] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[16769.880634] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[16769.880867] ehci_hcd 0000:00:1d.7: PME# disabled
[16769.900479] ACPI: Preparing to enter system sleep state S3
[16769.901088] Disabling non-boot CPUs ...
[16769.901115] Back to C!
[16769.901115] CPU0: Thermal monitoring enabled (TM1)
[16769.901115] ACPI: Waking up from system sleep state S3
[16769.908596] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[16769.908612] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[16769.908627] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0xbf41)
[16769.908641] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[16769.908654] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[16769.908668] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0xbf21)
[16769.908682] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[16769.908723] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[16769.908743] ehci_hcd 0000:00:1d.7: PME# disabled
[16769.908758] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x53f05000)
[16769.908768] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20020200, writing 0x20060200)
[16769.908817] ata_piix 0000:00:1f.1: restoring config space at offset 0x9 (was 0x0, writing 0x54000000)
[16769.908826] ata_piix 0000:00:1f.1: restoring config space at offset 0x7 (was 0x1, writing 0x375)
[16769.908833] ata_piix 0000:00:1f.1: restoring config space at offset 0x6 (was 0x1, writing 0x171)
[16769.908839] ata_piix 0000:00:1f.1: restoring config space at offset 0x5 (was 0x1, writing 0x3f5)
[16769.908846] ata_piix 0000:00:1f.1: restoring config space at offset 0x4 (was 0x1, writing 0x1f1)
[16769.908856] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800007)
[16769.908881] Intel ICH 0000:00:1f.5: restoring config space at offset 0x7 (was 0x0, writing 0xf4fff400)
[16769.908888] Intel ICH 0000:00:1f.5: restoring config space at offset 0x6 (was 0x0, writing 0xf4fff800)
[16769.924054] pci 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0x80000000)
[16769.924091] b44 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[16769.924108] b44 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfaffe000)
[16769.924115] b44 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x2000)
[16769.924123] b44 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
[16769.924142] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xf (was 0x7c001ff, writing 0x54001ff)
[16769.924150] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xe (was 0x0, writing 0xd4fc)
[16769.924156] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xd (was 0x0, writing 0xd400)
[16769.924163] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xc (was 0x0, writing 0xd0fc)
[16769.924170] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xb (was 0x0, writing 0xd000)
[16769.924177] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xa (was 0x0, writing 0x5bfff000)
[16769.924184] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x9 (was 0x0, writing 0x58000000)
[16769.924192] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x8 (was 0x0, writing 0x53fff000)
[16769.924199] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x7 (was 0x0, writing 0x50000000)
[16769.924206] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x6 (was 0x20000000, writing 0xb0060302)
[16769.924214] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6000000)
[16769.924221] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a808)
[16769.940051] ohci1394 0000:02:01.1: restoring config space at offset 0xf (was 0x4020100, writing 0x402010b)
[16769.940071] ohci1394 0000:02:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802008)
[16769.940079] ohci1394 0000:02:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116)
[16770.228312] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[16770.228321] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[16770.228342] usb usb2: root hub lost power or was reset
[16770.228364] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[16770.228371] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[16770.228390] usb usb3: root hub lost power or was reset
[16770.228408] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[16770.228416] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[16770.228435] usb usb4: root hub lost power or was reset
[16770.228451] ehci_hcd 0000:00:1d.7: PME# disabled
[16770.228459] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[16770.228467] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[16770.228473] usb usb1: root hub lost power or was reset
[16770.232368] ehci_hcd 0000:00:1d.7: debug port 1
[16770.232376] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[16770.232388] pci 0000:00:1e.0: setting latency timer to 64
[16770.232402] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[16770.232408] ata_piix 0000:00:1f.1: setting latency timer to 64
[16770.232432] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[16770.232440] Intel ICH 0000:00:1f.5: setting latency timer to 64
[16771.004344] ata2: clearing spurious IRQ
[16771.012655] ata2: clearing spurious IRQ
[16771.020318] ata2: clearing spurious IRQ
[16771.028426] ata2.00: configured for UDMA/33
[16771.245769] pci 0000:01:00.0: PME# disabled
[16771.245780] b44 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[16771.876235] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[16771.876284] pci 0000:03:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[16771.876487] ath5k 0000:03:00.0: enabling device (0000 -> 0002)
[16771.876497] ath5k 0000:03:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[16771.876638] ath5k 0000:03:00.0: registered as 'phy1'
[16772.465143] ath: EEPROM regdomain: 0x10
[16772.465146] ath: EEPROM indicates we should expect a direct regpair map
[16772.465151] ath: Country alpha2 being used: CO
[16772.465154] ath: Regpair used: 0x10
[16772.466322] phy1: Selected rate control algorithm 'minstrel'
[16772.467687] ath5k phy1: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[16772.467718] cfg80211: Calling CRDA for country: CO
[16772.520255] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[faffd800-faffdfff] Max Packet=[2048] IR/IT contexts=[4/8]
[16772.543243] serial 00:0b: activated
[16772.578649] parport_pc 00:0c: activated
[16772.620368] ata1: clearing spurious IRQ
[16772.629263] ata1: clearing spurious IRQ
[16772.636322] ata1: clearing spurious IRQ
[16772.645000] ata1.00: configured for UDMA/100
[16772.828264] sd 0:0:0:0: [sda] Starting disk
[16772.864636] PM: Finishing wakeup.
[16772.864639] Restarting tasks ... done.
[16778.265254] ADDRCONF(NETDEV_UP): eth0: link is not ready
[16783.032468] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16789.999401] wlan0: authenticate with AP 00:22:a4:45:ab:89
[16790.001205] wlan0: authenticated
[16790.001210] wlan0: associate with AP 00:22:a4:45:ab:89
[16790.003862] wlan0: RX AssocResp from 00:22:a4:45:ab:89 (capab=0x431 status=0 aid=1)
[16790.003868] wlan0: associated
[16790.004922] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[16800.948047] wlan0: no IPv6 routers present
[20792.608316] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=216.168.3.50 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=26298 DF PROTO=TCP SPT=55630 DPT=119 WINDOW=452 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A004E2C50415FC071)
[20923.726738] ath5k phy1: unsupported jumbo
[26673.137148] ath5k phy1: unsupported jumbo
[29404.342302] ath5k phy1: noise floor calibration timeout (2412MHz)
[32579.718250] b44: eth0: powering down PHY
[32579.928907] wlan0: disassociating by local choice (reason=3)
[32580.045775] wlan0: deauthenticating by local choice (reason=3)
[32580.059018] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[32580.356496] ath5k 0000:03:00.0: PCI INT A disabled
[32582.814922] PM: Syncing filesystems ... done.
[32583.066473] PM: Preparing system for mem sleep
[32583.067118] Freezing user space processes ... (elapsed 0.00 seconds) done.
[32583.073541] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[32583.073632] PM: Entering mem sleep
[32583.073664] Suspending console(s) (use no_console_suspend to debug)
[32583.073969] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[32583.120207] sd 0:0:0:0: [sda] Stopping disk
[32584.110203] parport_pc 00:0c: disabled
[32584.111836] serial 00:0b: disabled
[32584.124092] b44 0000:02:00.0: PCI INT A disabled
[32584.124100] ACPI handle has no context!
[32584.140431] Intel ICH 0000:00:1f.5: PCI INT B disabled
[32584.140605] ata_piix 0000:00:1f.1: PCI INT A disabled
[32584.140620] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[32584.140631] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[32584.140640] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[32584.140648] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[32584.140895] ehci_hcd 0000:00:1d.7: PME# disabled
[32584.160778] ACPI: Preparing to enter system sleep state S3
[32584.161256] Disabling non-boot CPUs ...
[32584.161287] Back to C!
[32584.161287] CPU0: Thermal monitoring enabled (TM1)
[32584.161287] ACPI: Waking up from system sleep state S3
[32584.168950] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[32584.168966] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[32584.168980] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0xbf41)
[32584.168994] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[32584.169007] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[32584.169021] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0xbf21)
[32584.169036] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[32584.169076] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[32584.169096] ehci_hcd 0000:00:1d.7: PME# disabled
[32584.169111] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x53f05000)
[32584.169121] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20020200, writing 0x20060200)
[32584.169171] ata_piix 0000:00:1f.1: restoring config space at offset 0x9 (was 0x0, writing 0x54000000)
[32584.169179] ata_piix 0000:00:1f.1: restoring config space at offset 0x7 (was 0x1, writing 0x375)
[32584.169186] ata_piix 0000:00:1f.1: restoring config space at offset 0x6 (was 0x1, writing 0x171)
[32584.169193] ata_piix 0000:00:1f.1: restoring config space at offset 0x5 (was 0x1, writing 0x3f5)
[32584.169199] ata_piix 0000:00:1f.1: restoring config space at offset 0x4 (was 0x1, writing 0x1f1)
[32584.169209] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800007)
[32584.169234] Intel ICH 0000:00:1f.5: restoring config space at offset 0x7 (was 0x0, writing 0xf4fff400)
[32584.169241] Intel ICH 0000:00:1f.5: restoring config space at offset 0x6 (was 0x0, writing 0xf4fff800)
[32584.184054] pci 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0x80000000)
[32584.184091] b44 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[32584.184109] b44 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfaffe000)
[32584.184115] b44 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x2000)
[32584.184123] b44 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
[32584.184143] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xf (was 0x7c001ff, writing 0x54001ff)
[32584.184150] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xe (was 0x0, writing 0xd4fc)
[32584.184157] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xd (was 0x0, writing 0xd400)
[32584.184164] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xc (was 0x0, writing 0xd0fc)
[32584.184171] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xb (was 0x0, writing 0xd000)
[32584.184178] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xa (was 0x0, writing 0x5bfff000)
[32584.184185] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x9 (was 0x0, writing 0x58000000)
[32584.184192] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x8 (was 0x0, writing 0x53fff000)
[32584.184199] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x7 (was 0x0, writing 0x50000000)
[32584.184206] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x6 (was 0x20000000, writing 0xb0060302)
[32584.184215] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6000000)
[32584.184222] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a808)
[32584.200050] ohci1394 0000:02:01.1: restoring config space at offset 0xf (was 0x4020100, writing 0x402010b)
[32584.200070] ohci1394 0000:02:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802008)
[32584.200079] ohci1394 0000:02:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116)
[32584.488260] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[32584.488269] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[32584.488290] usb usb2: root hub lost power or was reset
[32584.488311] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[32584.488318] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[32584.488337] usb usb3: root hub lost power or was reset
[32584.488355] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[32584.488363] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[32584.488381] usb usb4: root hub lost power or was reset
[32584.488398] ehci_hcd 0000:00:1d.7: PME# disabled
[32584.488406] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[32584.488414] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[32584.488420] usb usb1: root hub lost power or was reset
[32584.492308] ehci_hcd 0000:00:1d.7: debug port 1
[32584.492316] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[32584.492329] pci 0000:00:1e.0: setting latency timer to 64
[32584.492343] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[32584.492349] ata_piix 0000:00:1f.1: setting latency timer to 64
[32584.492373] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[32584.492381] Intel ICH 0000:00:1f.5: setting latency timer to 64
[32585.264346] ata2: clearing spurious IRQ
[32585.272653] ata2: clearing spurious IRQ
[32585.280319] ata2: clearing spurious IRQ
[32585.288426] ata2.00: configured for UDMA/33
[32585.505773] pci 0000:01:00.0: PME# disabled
[32585.505784] b44 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[32586.136231] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[32586.136280] pci 0000:03:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[32586.136485] ath5k 0000:03:00.0: enabling device (0000 -> 0002)
[32586.136494] ath5k 0000:03:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[32586.136646] ath5k 0000:03:00.0: registered as 'phy2'
[32586.725249] ath: EEPROM regdomain: 0x10
[32586.725252] ath: EEPROM indicates we should expect a direct regpair map
[32586.725257] ath: Country alpha2 being used: CO
[32586.725259] ath: Regpair used: 0x10
[32586.726292] phy2: Selected rate control algorithm 'minstrel'
[32586.727647] ath5k phy2: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[32586.727676] cfg80211: Calling CRDA for country: CO
[32586.780255] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[faffd800-faffdfff] Max Packet=[2048] IR/IT contexts=[4/8]
[32586.803249] serial 00:0b: activated
[32586.838658] parport_pc 00:0c: activated
[32586.880370] ata1: clearing spurious IRQ
[32586.905249] ata1: clearing spurious IRQ
[32586.912321] ata1: clearing spurious IRQ
[32586.921019] ata1.00: configured for UDMA/100
[32586.968262] sd 0:0:0:0: [sda] Starting disk
[32587.004626] PM: Finishing wakeup.
[32587.004630] Restarting tasks ... done.
[32592.575054] ADDRCONF(NETDEV_UP): eth0: link is not ready
[32597.030072] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[32603.981897] wlan0: authenticate with AP 00:22:a4:45:ab:89
[32603.983245] wlan0: authenticated
[32603.983250] wlan0: associate with AP 00:22:a4:45:ab:89
[32603.985948] wlan0: RX AssocResp from 00:22:a4:45:ab:89 (capab=0x431 status=0 aid=1)
[32603.985955] wlan0: associated
[32603.986895] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[32614.876231] wlan0: no IPv6 routers present
[41075.854896] ath5k phy2: unsupported jumbo
[70797.049502] ath5k phy2: unsupported jumbo
[81817.342436] ath5k phy2: noise floor calibration timeout (2412MHz)
[81838.342437] ath5k phy2: noise floor calibration timeout (2412MHz)
[84804.087360] b44: eth0: powering down PHY
[84804.327891] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[84804.360596] wlan0: deauthenticating by local choice (reason=3)
[84804.401279] ath5k phy2: failed to wakeup the MAC Chip
[84804.740509] ath5k 0000:03:00.0: PCI INT A disabled
[84807.726552] PM: Syncing filesystems ... done.
[84807.988901] PM: Preparing system for mem sleep
[84807.989579] Freezing user space processes ... (elapsed 0.00 seconds) done.
[84807.998609] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[84807.998702] PM: Entering mem sleep
[84807.998734] Suspending console(s) (use no_console_suspend to debug)
[84807.999038] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[84808.044527] sd 0:0:0:0: [sda] Stopping disk
[84809.030027] parport_pc 00:0c: disabled
[84809.031666] serial 00:0b: disabled
[84809.044091] b44 0000:02:00.0: PCI INT A disabled
[84809.044099] ACPI handle has no context!
[84809.060429] Intel ICH 0000:00:1f.5: PCI INT B disabled
[84809.060607] ata_piix 0000:00:1f.1: PCI INT A disabled
[84809.060623] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[84809.060633] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[84809.060642] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[84809.060651] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[84809.060900] ehci_hcd 0000:00:1d.7: PME# disabled
[84809.080771] ACPI: Preparing to enter system sleep state S3
[84809.081281] Disabling non-boot CPUs ...
[84809.081313] Back to C!
[84809.081313] CPU0: Thermal monitoring enabled (TM1)
[84809.081313] ACPI: Waking up from system sleep state S3
[84809.088770] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[84809.088787] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[84809.088801] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0xbf41)
[84809.088815] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[84809.088828] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[84809.088842] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0xbf21)
[84809.088856] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[84809.088897] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[84809.088916] ehci_hcd 0000:00:1d.7: PME# disabled
[84809.088931] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x53f05000)
[84809.088941] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20020200, writing 0x20060200)
[84809.088991] ata_piix 0000:00:1f.1: restoring config space at offset 0x9 (was 0x0, writing 0x54000000)
[84809.088999] ata_piix 0000:00:1f.1: restoring config space at offset 0x7 (was 0x1, writing 0x375)
[84809.089006] ata_piix 0000:00:1f.1: restoring config space at offset 0x6 (was 0x1, writing 0x171)
[84809.089013] ata_piix 0000:00:1f.1: restoring config space at offset 0x5 (was 0x1, writing 0x3f5)
[84809.089019] ata_piix 0000:00:1f.1: restoring config space at offset 0x4 (was 0x1, writing 0x1f1)
[84809.089029] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800007)
[84809.089054] Intel ICH 0000:00:1f.5: restoring config space at offset 0x7 (was 0x0, writing 0xf4fff400)
[84809.089061] Intel ICH 0000:00:1f.5: restoring config space at offset 0x6 (was 0x0, writing 0xf4fff800)
[84809.104053] pci 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0x80000000)
[84809.104090] b44 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[84809.104108] b44 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfaffe000)
[84809.104114] b44 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x2000)
[84809.104122] b44 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
[84809.104142] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xf (was 0x7c001ff, writing 0x54001ff)
[84809.104149] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xe (was 0x0, writing 0xd4fc)
[84809.104156] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xd (was 0x0, writing 0xd400)
[84809.104163] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xc (was 0x0, writing 0xd0fc)
[84809.104170] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xb (was 0x0, writing 0xd000)
[84809.104177] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xa (was 0x0, writing 0x5bfff000)
[84809.104184] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x9 (was 0x0, writing 0x58000000)
[84809.104191] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x8 (was 0x0, writing 0x53fff000)
[84809.104198] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x7 (was 0x0, writing 0x50000000)
[84809.104205] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x6 (was 0x20000000, writing 0xb0060302)
[84809.104213] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6000000)
[84809.104220] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a808)
[84809.120050] ohci1394 0000:02:01.1: restoring config space at offset 0xf (was 0x4020100, writing 0x402010b)
[84809.120070] ohci1394 0000:02:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802008)
[84809.120079] ohci1394 0000:02:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116)
[84809.408403] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[84809.408411] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[84809.408432] usb usb2: root hub lost power or was reset
[84809.408453] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[84809.408460] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[84809.408479] usb usb3: root hub lost power or was reset
[84809.408497] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[84809.408505] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[84809.408523] usb usb4: root hub lost power or was reset
[84809.408540] ehci_hcd 0000:00:1d.7: PME# disabled
[84809.408548] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[84809.408556] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[84809.408563] usb usb1: root hub lost power or was reset
[84809.412457] ehci_hcd 0000:00:1d.7: debug port 1
[84809.412465] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[84809.412478] pci 0000:00:1e.0: setting latency timer to 64
[84809.412491] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[84809.412497] ata_piix 0000:00:1f.1: setting latency timer to 64
[84809.412521] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[84809.412529] Intel ICH 0000:00:1f.5: setting latency timer to 64
[84810.184345] ata2: clearing spurious IRQ
[84810.192653] ata2: clearing spurious IRQ
[84810.200319] ata2: clearing spurious IRQ
[84810.208424] ata2.00: configured for UDMA/33
[84810.425775] pci 0000:01:00.0: PME# disabled
[84810.425786] b44 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[84811.056232] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[84811.056282] pci 0000:03:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[84811.056491] ath5k 0000:03:00.0: enabling device (0000 -> 0002)
[84811.056501] ath5k 0000:03:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[84811.056656] ath5k 0000:03:00.0: registered as 'phy3'
[84811.645008] ath: EEPROM regdomain: 0x10
[84811.645012] ath: EEPROM indicates we should expect a direct regpair map
[84811.645017] ath: Country alpha2 being used: CO
[84811.645019] ath: Regpair used: 0x10
[84811.646044] phy3: Selected rate control algorithm 'minstrel'
[84811.647406] ath5k phy3: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[84811.647435] cfg80211: Calling CRDA for country: CO
[84811.700254] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[faffd800-faffdfff] Max Packet=[2048] IR/IT contexts=[4/8]
[84811.723231] serial 00:0b: activated
[84811.758650] parport_pc 00:0c: activated
[84811.800369] ata1: clearing spurious IRQ
[84811.825262] ata1: clearing spurious IRQ
[84811.832322] ata1: clearing spurious IRQ
[84811.841013] ata1.00: configured for UDMA/100
[84811.888265] sd 0:0:0:0: [sda] Starting disk
[84811.928637] PM: Finishing wakeup.
[84811.928640] Restarting tasks ... done.
[84817.350619] ADDRCONF(NETDEV_UP): eth0: link is not ready
[84822.033098] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[84828.990195] wlan0: authenticate with AP 00:22:a4:45:ab:89
[84828.991453] wlan0: authenticated
[84828.991458] wlan0: associate with AP 00:22:a4:45:ab:89
[84828.993596] wlan0: RX AssocResp from 00:22:a4:45:ab:89 (capab=0x431 status=0 aid=1)
[84828.993602] wlan0: associated
[84828.994558] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[84839.632045] wlan0: no IPv6 routers present
[84964.925930] ath5k phy3: unsupported jumbo
[86083.053363] ath5k phy3: noise floor calibration timeout (2452MHz)
[92083.013349] ath5k phy3: noise floor calibration timeout (2452MHz)
[120333.893149] ath5k phy3: unsupported jumbo
[120483.913032] ath5k phy3: unsupported jumbo
[123965.408097] ath5k phy3: unsupported jumbo
[142660.728243] ath5k phy3: unsupported jumbo
[149128.897787] ath5k phy3: unsupported jumbo
[157777.296291] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=216.168.3.50 LEN=82 TOS=0x00 PREC=0x00 TTL=64 ID=38222 DF PROTO=TCP SPT=35309 DPT=119 WINDOW=20610 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A0258BA6C4725E078)
[158341.796881] ath5k phy3: unsupported jumbo
[159108.831766] ath5k phy3: unsupported jumbo
[159977.264123] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=216.168.3.50 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=38093 DF PROTO=TCP SPT=39946 DPT=119 WINDOW=182 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A02611ED44D20B6A7)
[160188.743613] ath5k phy3: unsupported jumbo
[162066.295125] ath5k phy3: unsupported jumbo
[167793.804308] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=153.106.6.25 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=48526 DF PROTO=TCP SPT=45158 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A027EF02B06214109)
[167796.864101] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=153.106.6.25 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=40092 DF PROTO=TCP SPT=45159 DPT=80 WINDOW=2251 RES=0x00 ACK FIN URGP=0 OPT (0101080A027EF328062140BE)
[167804.004104] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=153.106.6.25 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=54796 DF PROTO=TCP SPT=45160 DPT=80 WINDOW=494 RES=0x00 ACK FIN URGP=0 OPT (0101080A027EFA21062140EF)
[167814.204292] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=153.106.6.25 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=59781 DF PROTO=TCP SPT=45162 DPT=80 WINDOW=144 RES=0x00 ACK FIN URGP=0 OPT (0101080A027F041706214084)
[167819.304279] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=153.106.6.25 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33307 DF PROTO=TCP SPT=45161 DPT=80 WINDOW=902 RES=0x00 ACK FIN URGP=0 OPT (0101080A027F0912062140E4)
[175963.342061] ath5k phy3: noise floor calibration timeout (2452MHz)
[175963.351351] ath5k phy3: noise floor calibration timeout (2452MHz)
[175963.749246] ath5k phy3: noise floor calibration timeout (2457MHz)
[176082.989210] ath5k phy3: noise floor calibration timeout (2452MHz)
[176083.389241] ath5k phy3: noise floor calibration timeout (2457MHz)
[176202.989022] ath5k phy3: noise floor calibration timeout (2452MHz)
[176203.389224] ath5k phy3: noise floor calibration timeout (2457MHz)
[176323.377413] ath5k phy3: noise floor calibration timeout (2457MHz)
[176443.385209] ath5k phy3: noise floor calibration timeout (2457MHz)
[176562.989226] ath5k phy3: noise floor calibration timeout (2452MHz)
[176563.389223] ath5k phy3: noise floor calibration timeout (2457MHz)
[205758.428287] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=216.168.3.50 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=26624 DF PROTO=TCP SPT=37703 DPT=119 WINDOW=20610 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A030FC2FF4F03489A)
[205843.009604] ath5k phy3: noise floor calibration timeout (2452MHz)
[205843.409224] ath5k phy3: noise floor calibration timeout (2457MHz)
[205962.989228] ath5k phy3: noise floor calibration timeout (2452MHz)
[205963.397465] ath5k phy3: noise floor calibration timeout (2457MHz)
[207403.366287] ath5k phy3: noise floor calibration timeout (2457MHz)
[208880.780296] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=216.168.3.50 LEN=74 TOS=0x00 PREC=0x00 TTL=64 ID=10886 DF PROTO=TCP SPT=52626 DPT=119 WINDOW=20611 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A031BAC2B52D325B8)
[209203.313433] ath5k phy3: noise floor calibration timeout (2457MHz)
[210763.209399] ath5k phy3: noise floor calibration timeout (2457MHz)
[211003.173364] ath5k phy3: noise floor calibration timeout (2457MHz)
[211962.993228] ath5k phy3: noise floor calibration timeout (2452MHz)
[212203.009383] ath5k phy3: noise floor calibration timeout (2452MHz)
[212323.069380] ath5k phy3: noise floor calibration timeout (2457MHz)
[212398.047210] ath5k phy3: unsupported jumbo
[225981.214108] ath5k phy3: unsupported jumbo
[235813.786323] ath5k phy3: unsupported jumbo
[237320.104089] usb 3-1: new full speed USB device using uhci_hcd and address 3
[237320.300315] usb 3-1: New USB device found, idVendor=03f0, idProduct=4f11
[237320.300376] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[237320.300403] usb 3-1: Product: Officejet 5600 series
[237320.300424] usb 3-1: Manufacturer: HP
[237320.300442] usb 3-1: SerialNumber: CN78PF305W04CY
[237320.300801] usb 3-1: configuration #1 chosen from 1 choice
[237320.307541] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4F11
[237325.019821] usblp0: removed
[237348.838394] usb 3-1: usbfs: process 28121 (hp) did not claim interface 0 before use
[237349.064113] usb 3-1: USB disconnect, address 3
[237382.944089] usb 3-1: new full speed USB device using uhci_hcd and address 4
[237383.155112] usb 3-1: New USB device found, idVendor=03f0, idProduct=4f11
[237383.155140] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[237383.155152] usb 3-1: Product: Officejet 5600 series
[237383.155161] usb 3-1: Manufacturer: HP
[237383.155169] usb 3-1: SerialNumber: CN78PF305W04CY
[237383.155401] usb 3-1: configuration #1 chosen from 1 choice
[237383.162264] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4F11
[237386.057579] usblp0: removed
[237921.444686] ath5k phy3: unsupported jumbo
[238237.400121] usb 3-1: USB disconnect, address 4
[242028.456266] usb 1-1: new high speed USB device using ehci_hcd and address 5
[242028.590653] usb 1-1: New USB device found, idVendor=0dbf, idProduct=0301
[242028.590695] usb 1-1: New USB device strings: Mfr=56, Product=65, SerialNumber=87
[242028.590722] usb 1-1: Product: USB2.0 Storage Device
[242028.590743] usb 1-1: Manufacturer: Pocketec
[242028.590762] usb 1-1: SerialNumber: DEF10D9A080E
[242028.591127] usb 1-1: configuration #1 chosen from 1 choice
[242081.742637] usb 1-1: USB disconnect, address 5
[242089.624265] usb 1-3: new high speed USB device using ehci_hcd and address 6
[242089.758688] usb 1-3: New USB device found, idVendor=0dbf, idProduct=0301
[242089.758724] usb 1-3: New USB device strings: Mfr=56, Product=65, SerialNumber=87
[242089.758752] usb 1-3: Product: USB2.0 Storage Device
[242089.758772] usb 1-3: Manufacturer: Pocketec
[242089.758792] usb 1-3: SerialNumber: DEF10D9A080E
[242089.759158] usb 1-3: configuration #1 chosen from 1 choice
[246723.099637] usb 1-3: USB disconnect, address 6
[246734.288103] usb 1-3: new high speed USB device using ehci_hcd and address 7
[246734.422739] usb 1-3: New USB device found, idVendor=0dbf, idProduct=0301
[246734.422776] usb 1-3: New USB device strings: Mfr=56, Product=65, SerialNumber=87
[246734.422803] usb 1-3: Product: USB2.0 Storage Device
[246734.422824] usb 1-3: Manufacturer: Pocketec
[246734.422843] usb 1-3: SerialNumber: DEF10D9A080E
[246734.423207] usb 1-3: configuration #1 chosen from 1 choice
[248095.342542] ath5k phy3: noise floor calibration timeout (2412MHz)
[248204.286517] usb 1-3: USB disconnect, address 7
[248218.788091] usb 1-1: new high speed USB device using ehci_hcd and address 8
[248218.922718] usb 1-1: New USB device found, idVendor=0dbf, idProduct=0301
[248218.922758] usb 1-1: New USB device strings: Mfr=56, Product=65, SerialNumber=87
[248218.922785] usb 1-1: Product: USB2.0 Storage Device
[248218.922806] usb 1-1: Manufacturer: Pocketec
[248218.922825] usb 1-1: SerialNumber: DEF10D9A080E
[248218.923190] usb 1-1: configuration #1 chosen from 1 choice
[249594.192221] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11795 PROTO=TCP SPT=59002 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03B6FB5C20380408)
[249594.596127] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11796 PROTO=TCP SPT=59002 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03B6FBC120380408)
[249595.404290] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11797 PROTO=TCP SPT=59002 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03B6FC8B20380408)
[249597.020286] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11798 PROTO=TCP SPT=59002 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03B6FE1F20380408)
[249600.252293] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11799 PROTO=TCP SPT=59002 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03B7014720380408)
[249619.644102] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11801 PROTO=TCP SPT=59002 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03B7143720380408)
[249645.500292] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11802 PROTO=TCP SPT=59002 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03B72D7720380408)
[249697.212282] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11803 PROTO=TCP SPT=59002 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03B75FF720380408)
[249899.448261] usb 1-1: USB disconnect, address 8
[250223.104061] usb 1-1: new high speed USB device using ehci_hcd and address 9
[250223.393814] usb 1-1: New USB device found, idVendor=059b, idProduct=0178
[250223.393861] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[250223.393888] usb 1-1: Product: Desktop Hard Drive
[250223.393908] usb 1-1: Manufacturer: IOMEGA
[250223.393927] usb 1-1: SerialNumber: 78000000000354E4
[250223.394296] usb 1-1: configuration #1 chosen from 1 choice
[250434.994114] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11809 PROTO=TCP SPT=33561 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03BA3074203B22B8)
[250435.288098] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11810 PROTO=TCP SPT=33561 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03BA30BE203B22B8)
[250435.880290] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11811 PROTO=TCP SPT=33561 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03BA3152203B22B8)
[250437.064098] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11812 PROTO=TCP SPT=33561 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03BA327A203B22B8)
[250439.432289] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11813 PROTO=TCP SPT=33561 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03BA34CA203B22B8)
[250472.584111] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11816 PROTO=TCP SPT=33561 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03BA552A203B22B8)
[250510.472109] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11817 PROTO=TCP SPT=33561 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A03BA7A2A203B22B8)
[250969.169302] usb 1-1: USB disconnect, address 9
[250977.984293] usb 1-3: new high speed USB device using ehci_hcd and address 10
[250978.273835] usb 1-3: New USB device found, idVendor=059b, idProduct=0178
[250978.273880] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[250978.273908] usb 1-3: Product: Desktop Hard Drive
[250978.273928] usb 1-3: Manufacturer: IOMEGA
[250978.273947] usb 1-3: SerialNumber: 78000000000354E4
[250978.274316] usb 1-3: configuration #1 chosen from 1 choice
[251543.912266] usb 1-1: new high speed USB device using ehci_hcd and address 11
[251544.046695] usb 1-1: New USB device found, idVendor=0dbf, idProduct=0301
[251544.046739] usb 1-1: New USB device strings: Mfr=56, Product=65, SerialNumber=87
[251544.046766] usb 1-1: Product: USB2.0 Storage Device
[251544.046787] usb 1-1: Manufacturer: Pocketec
[251544.046806] usb 1-1: SerialNumber: DEF10D9A080E
[251544.047170] usb 1-1: configuration #1 chosen from 1 choice
[251641.715308] usb 1-1: USB disconnect, address 11
[251642.330827] usb 1-3: USB disconnect, address 10
[253128.342594] ath5k phy3: noise floor calibration timeout (2412MHz)
[287799.027303] usb 1-1: new high speed USB device using ehci_hcd and address 12
[287799.159662] usb 1-1: New USB device found, idVendor=0dbf, idProduct=0301
[287799.159709] usb 1-1: New USB device strings: Mfr=56, Product=65, SerialNumber=87
[287799.159736] usb 1-1: Product: USB2.0 Storage Device
[287799.159757] usb 1-1: Manufacturer: Pocketec
[287799.159776] usb 1-1: SerialNumber: DEF10D9A080E
[287799.160189] usb 1-1: configuration #1 chosen from 1 choice
[287919.370333] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11823 PROTO=TCP SPT=50498 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A04492E4A20CA4DB1)
[287919.648288] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11824 PROTO=TCP SPT=50498 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A04492E9020CA4DB1)
[287920.208287] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11825 PROTO=TCP SPT=50498 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A04492F1C20CA4DB1)
[287921.328289] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11826 PROTO=TCP SPT=50498 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A0449303420CA4DB1)
[287923.568101] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11827 PROTO=TCP SPT=50498 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A0449326420CA4DB1)
[287954.928085] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11830 PROTO=TCP SPT=50498 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A0449510420CA4DB1)
[287990.768296] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11831 PROTO=TCP SPT=50498 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A0449740420CA4DB1)
[288529.405650] usb 1-1: USB disconnect, address 12
[288562.379720] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11832 PROTO=TCP SPT=56681 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A044BA23A2033F1CF)
[288562.656057] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11833 PROTO=TCP SPT=56681 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A044BA2802033F1CF)
[288563.216074] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11834 PROTO=TCP SPT=56681 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A044BA30C2033F1CF)
[288564.336080] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11835 PROTO=TCP SPT=56681 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A044BA4242033F1CF)
[288566.576088] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11836 PROTO=TCP SPT=56681 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A044BA6542033F1CF)
[288597.936104] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11839 PROTO=TCP SPT=56681 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A044BC4F42033F1CF)
[288633.776104] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.162 DST=208.68.18.97 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11840 PROTO=TCP SPT=56681 DPT=80 WINDOW=114 RES=0x00 ACK FIN URGP=0 OPT (0101080A044BE7F42033F1CF)
[288665.932077] usb 1-1: new high speed USB device using ehci_hcd and address 13
[288666.066674] usb 1-1: New USB device found, idVendor=0dbf, idProduct=0301
[288666.066709] usb 1-1: New USB device strings: Mfr=56, Product=65, SerialNumber=87
[288666.066736] usb 1-1: Product: USB2.0 Storage Device
[288666.066757] usb 1-1: Manufacturer: Pocketec
[288666.066776] usb 1-1: SerialNumber: DEF10D9A080E
[288666.067132] usb 1-1: configuration #1 chosen from 1 choice
[289096.388973] usb 1-1: USB disconnect, address 13
[289117.244261] usb 1-1: new high speed USB device using ehci_hcd and address 14
[289117.378718] usb 1-1: New USB device found, idVendor=0dbf, idProduct=0301
[289117.378757] usb 1-1: New USB device strings: Mfr=56, Product=65, SerialNumber=87
[289117.378785] usb 1-1: Product: USB2.0 Storage Device
[289117.378806] usb 1-1: Manufacturer: Pocketec
[289117.378825] usb 1-1: SerialNumber: DEF10D9A080E
[289117.379176] usb 1-1: configuration #1 chosen from 1 choice
[289126.348851] ath5k phy3: unsupported jumbo
[291763.189890] ath5k phy3: unsupported jumbo