rendered paste bodyInitializing cgroup subsys cpusetInitializing cgroup subsys cpuLinux version 2.6.31.12-server-3mnb (qateam@titan.mandriva.com) (gcc version 4.4.1 (GCC) ) #1 SMP Thu Mar 25 13:52:25 EDT 2010KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMCBIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cff80000 (usable) BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data) BIOS-e820: 00000000cff8e000 - 00000000cffd0000 (ACPI NVS) BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable)DMI present.AMI BIOS detected: BIOS may corrupt low RAM, working around it.e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)last_pfn = 0x130000 max_arch_pfn = 0x1000000MTRR default type: uncachableMTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-protect E0000-EFFFF write-through F0000-FFFFF write-protectMTRR variable ranges enabled: 0 base 000000000 mask F00000000 write-back 1 base 100000000 mask FE0000000 write-back 2 base 120000000 mask FF0000000 write-back 3 base 0D0000000 mask FF0000000 uncachable 4 base 0E0000000 mask FE0000000 uncachable 5 disabled 6 disabled 7 disabledx86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)initial memory mapped : 0 - 00c00000init_memory_mapping: 0000000000000000-00000000377fe000NX (Execute Disable) protection: active 0000000000 - 0000200000 page 4k 0000200000 - 0037600000 page 2M 0037600000 - 00377fe000 page 4kkernel direct mapping tables up to 377fe000 @ 10000-17000RAMDISK: 379f0000 - 37fefb3dAllocated new RAMDISK: 0074f000 - 00d4eb3dMove RAMDISK from 00000000379f0000 - 0000000037fefb3c to 0074f000 - 00d4eb3cACPI: RSDP 000fbb10 00024 (v02 ACPIAM)ACPI: XSDT cff80100 0005C (v01 A_M_I_ OEMXSDT 07000901 MSFT 00000097)ACPI: FACP cff80290 000F4 (v03 A_M_I_ OEMFACP 07000901 MSFT 00000097)ACPI: DSDT cff80440 08888 (v01 A1014 A1014001 00000001 INTL 20060113)ACPI: FACS cff8e000 00040ACPI: APIC cff80390 0006C (v01 A_M_I_ OEMAPIC 07000901 MSFT 00000097)ACPI: MCFG cff80400 0003C (v01 A_M_I_ OEMMCFG 07000901 MSFT 00000097)ACPI: OEMB cff8e040 00081 (v01 A_M_I_ AMI_OEM 07000901 MSFT 00000097)ACPI: HPET cff88cd0 00038 (v01 A_M_I_ OEMHPET 07000901 MSFT 00000097)ACPI: OSFR cff88d10 000B0 (v01 A_M_I_ OEMOSFR 07000901 MSFT 00000097)ACPI: SSDT cff8e650 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)ACPI: Local APIC address 0xfee000003976MB HIGHMEM available.887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00014000 - 0001af00(9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00007475a4] TEXT DATA BSS ==> [0000100000 - 00007475a4] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #5 [0000748000 - 000074e21c] BRK ==> [0000748000 - 000074e21c] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] #7 [000074f000 - 0000d4eb3d] NEW RAMDISK ==> [000074f000 - 0000d4eb3d] #8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000]found SMP MP-table at [c00ff780] ff780Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x00130000Movable zone start PFN for each nodeearly_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x000cff80 0: 0x00100000 -> 0x00130000On node 0 totalpages: 1048333free_area_init_node: node 0, pgdat c0605120, node_mem_map c1000200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3949 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 7953 pages used for memmap HighMem zone: 813169 pages, LIFO batch:31Using APIC driver defaultACPI: PM-Timer IO Port: 0x808ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Enabling APIC mode: Flat. Using 1 I/O APICsUsing ACPI (MADT) for SMP configuration informationACPI: HPET id: 0x8086a301 base: 0xfed00000SMP: Allowing 4 CPUs, 2 hotplug CPUsnr_irqs_gsi: 24PM: Registered nosave memory: 000000000009d000 - 000000000009e000PM: Registered nosave memory: 000000000009e000 - 00000000000a0000PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000PM: Registered nosave memory: 00000000000e4000 - 0000000000100000Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1PERCPU: Embedded 15 pages at c3610000, static data 38332 bytesBuilt 1 zonelists in Zone order, mobility grouping on. Total pages: 1038604Kernel command line: BOOT_IMAGE=linux root=UUID=17676e27-82f1-44b9-bb43-0b2ee810c3f9 splash=silent vga=788PID hash table entries: 4096 (order: 12, 16384 bytes)Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240Initializing HighMem for node 0 (000377fe:00130000)Memory: 4139788k/4980736k available (3235k kernel code, 52652k reserved, 1955k data, 448k init, 3284488k highmem)virtual kernel memory layout: fixmap : 0xffd55000 - 0xfffff000 (2728 kB) pkmap : 0xff800000 - 0xffa00000 (2048 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0612000 - 0xc0682000 ( 448 kB) .data : 0xc0428dd6 - 0xc0611da8 (1955 kB) .text : 0xc0100000 - 0xc0428dd6 (3235 kB)Checking if this processor honours the WP bit even in supervisor mode...Ok.SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1NR_IRQS:1280Extended CMOS year: 2000Fast TSC calibration using PITDetected 2793.455 MHz processor.Console: colour dummy device 80x25console [tty0] enabledhpet clockevent registeredHPET: 4 timers in total, 0 timers will be used for per-cpu timerCalibrating delay loop (skipped), value calculated using timer frequency.. 5586.91 BogoMIPS (lpj=27934550)Security Framework initializedTOMOYO Linux initializedMount-cache hash table entries: 512Initializing cgroup subsys nsInitializing cgroup subsys cpuacctInitializing cgroup subsys devicesInitializing cgroup subsys freezerInitializing cgroup subsys net_clsCPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 3072KCPU: Physical Processor ID: 0CPU: Processor Core ID: 0mce: CPU supports 6 MCE banksCPU0: Thermal monitoring enabled (TM2)using mwait in idle threads.Performance Counters: Core2 events, Intel PMU driver.... version: 2... bit width: 40... generic counters: 2... value mask: 000000ffffffffff... max period: 000000007fffffff... fixed-purpose counters: 3... counter mask: 0000000700000003Checking 'hlt' instruction... OK.ACPI: Checking initramfs for custom DSDTACPI: Core revision 20090521ftrace: converting mcount calls to 0f 1f 44 00 00ftrace: allocating 14879 entries in 30 pages..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1CPU0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping 0aBooting processor 1 APIC 0x1 ip 0x6000Initializing CPU#1Calibrating delay using timer specific routine.. 5585.99 BogoMIPS (lpj=27929997)CPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 3072KCPU: Physical Processor ID: 0CPU: Processor Core ID: 1mce: CPU supports 6 MCE banksCPU1: Thermal monitoring enabled (TM2)x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106CPU1: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping 0achecking TSC synchronization [CPU#0 -> CPU#1]: passed.Brought up 2 CPUsTotal of 2 processors activated (11172.90 BogoMIPS).CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0tmpfs: No value for mount option 'mode'devtmpfs: initializedBooting paravirtualized kernel on bare hardwareTime: 11:39:57 Date: 04/16/10NET: Registered protocol family 16ACPI: bus type pci registeredPCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255PCI: Not using MMCONFIG.PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5PCI: Using configuration type 1 for base accessbio: create slab <bio-0> at 0ACPI: EC: Look up EC in DSDTACPI: Interpreter enabledACPI: (supports S0 S1 S3 S4 S5)ACPI: Using IOAPIC for interrupt routingPCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255PCI: MCFG area at e0000000 reserved in ACPI motherboard resourcesPCI: Using MMCONFIG for extended config spaceACPI Warning: Incorrect checksum in table [OEMB] - D1, should be C8 20090521 tbutils-246ACPI: No dock devices found.ACPI: PCI Root Bridge [PCI0] (0000:00)pci 0000:00:01.0: PME# supported from D0 D3hot D3coldpci 0000:00:01.0: PME# disabledpci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f]pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f]pci 0000:00:1a.7: reg 10 32bit mmio: [0xfbfffc00-0xfbffffff]pci 0000:00:1a.7: PME# supported from D0 D3hot D3coldpci 0000:00:1a.7: PME# disabledpci 0000:00:1b.0: reg 10 64bit mmio: [0xfbff8000-0xfbffbfff]pci 0000:00:1b.0: PME# supported from D0 D3hot D3coldpci 0000:00:1b.0: PME# disabledpci 0000:00:1c.0: PME# supported from D0 D3hot D3coldpci 0000:00:1c.0: PME# disabledpci 0000:00:1c.4: PME# supported from D0 D3hot D3coldpci 0000:00:1c.4: PME# disabledpci 0000:00:1c.5: PME# supported from D0 D3hot D3coldpci 0000:00:1c.5: PME# disabledpci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f]pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f]pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbfff800-0xfbfffbff]pci 0000:00:1d.7: PME# supported from D0 D3hot D3coldpci 0000:00:1d.7: PME# disabledpci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007]pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03]pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887]pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f]pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f]pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbfff400-0xfbfff4ff]pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007]pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03]pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887]pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803]pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f]pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f]pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]pci 0000:01:00.0: reg 14 32bit mmio: [0xd0000000-0xdfffffff]pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfcffffff]pci 0000:01:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9fffff]pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfe9fffff]pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfaf00000-0xfaffffff]pci 0000:03:00.0: reg 10 io port: [0xdc00-0xdc07]pci 0000:03:00.0: reg 14 io port: [0xd880-0xd883]pci 0000:03:00.0: reg 18 io port: [0xd800-0xd807]pci 0000:03:00.0: reg 1c io port: [0xd480-0xd483]pci 0000:03:00.0: reg 20 io port: [0xd400-0xd40f]pci 0000:03:00.0: reg 24 32bit mmio: [0xfebffc00-0xfebffdff]pci 0000:03:00.0: supports D1pci 0000:03:00.0: PME# supported from D0 D1 D3hotpci 0000:03:00.0: PME# disabledpci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]pci 0000:00:1c.4: bridge 32bit mmio: [0xfeb00000-0xfebfffff]pci 0000:02:00.0: reg 10 64bit mmio: [0xfeac0000-0xfeafffff]pci 0000:02:00.0: reg 18 io port: [0xcc00-0xcc7f]pci 0000:02:00.0: PME# supported from D3hot D3coldpci 0000:02:00.0: PME# disabledpci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff]pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff]pci 0000:05:02.0: reg 10 io port: [0xe880-0xe89f]pci 0000:05:02.1: reg 10 io port: [0xec00-0xec07]pci 0000:00:1e.0: transparent bridgepci 0000:00:1e.0: bridge io port: [0xe000-0xefff]pci_bus 0000:00: on NUMA node 0ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)PCI: Using ACPI for IRQ routingNetLabel: InitializingNetLabel: domain hash size = 128NetLabel: protocols = UNLABELED CIPSOv4NetLabel: unlabeled traffic allowed by defaulthpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0hpet0: 4 comparators, 64-bit 14.318180 MHz counterSwitched to high resolution mode on CPU 1Switched to high resolution mode on CPU 0pnp: PnP ACPI initACPI: bus type pnp registeredpnp: PnP ACPI: found 16 devicesACPI: ACPI bus type pnp unregisteredPnPBIOS: Disabledsystem 00:01: iomem range 0xfed14000-0xfed19fff has been reservedsystem 00:07: ioport range 0x290-0x29f has been reservedsystem 00:08: ioport range 0x4d0-0x4d1 has been reservedsystem 00:08: ioport range 0x800-0x87f has been reservedsystem 00:08: ioport range 0x500-0x57f has been reservedsystem 00:08: iomem range 0xfed08000-0xfed08fff has been reservedsystem 00:08: iomem range 0xfed1c000-0xfed1ffff has been reservedsystem 00:08: iomem range 0xfed20000-0xfed3ffff has been reservedsystem 00:08: iomem range 0xfed50000-0xfed8ffff has been reservedsystem 00:0b: iomem range 0xffc00000-0xffefffff has been reservedsystem 00:0c: iomem range 0xfec00000-0xfec00fff could not be reservedsystem 00:0c: iomem range 0xfee00000-0xfee00fff has been reservedsystem 00:0e: iomem range 0xe0000000-0xefffffff has been reservedsystem 00:0f: iomem range 0x0-0x9ffff could not be reservedsystem 00:0f: iomem range 0xc0000-0xcffff could not be reservedsystem 00:0f: iomem range 0xe0000-0xfffff could not be reservedsystem 00:0f: iomem range 0x100000-0xcfffffff could not be reservedpci 0000:00:01.0: PCI bridge, secondary bus 0000:01pci 0000:00:01.0: IO window: disabledpci 0000:00:01.0: MEM window: 0xfc000000-0xfe9fffffpci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffffpci 0000:00:1c.0: PCI bridge, secondary bus 0000:04pci 0000:00:1c.0: IO window: disabledpci 0000:00:1c.0: MEM window: disabledpci 0000:00:1c.0: PREFETCH window: 0x000000faf00000-0x000000faffffffpci 0000:00:1c.4: PCI bridge, secondary bus 0000:03pci 0000:00:1c.4: IO window: 0xd000-0xdfffpci 0000:00:1c.4: MEM window: 0xfeb00000-0xfebfffffpci 0000:00:1c.4: PREFETCH window: disabledpci 0000:00:1c.5: PCI bridge, secondary bus 0000:02pci 0000:00:1c.5: IO window: 0xc000-0xcfffpci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffffpci 0000:00:1c.5: PREFETCH window: disabledpci 0000:00:1e.0: PCI bridge, secondary bus 0000:05pci 0000:00:1e.0: IO window: 0xe000-0xefffpci 0000:00:1e.0: MEM window: disabledpci 0000:00:1e.0: PREFETCH window: disabledpci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16pci 0000:00:01.0: setting latency timer to 64pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17pci 0000:00:1c.0: setting latency timer to 64pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17pci 0000:00:1c.4: setting latency timer to 64pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16pci 0000:00:1c.5: setting latency timer to 64pci 0000:00:1e.0: setting latency timer to 64pci_bus 0000:00: resource 0 io: [0x00-0xffff]pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfe9fffff]pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]pci_bus 0000:04: resource 2 pref mem [0xfaf00000-0xfaffffff]pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]pci_bus 0000:05: resource 0 io: [0xe000-0xefff]pci_bus 0000:05: resource 3 io: [0x00-0xffff]pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072 (order: 8, 1048576 bytes)TCP bind hash table entries: 65536 (order: 7, 524288 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredNET: Registered protocol family 1Trying to unpack rootfs image as initramfs...Freeing initrd memory: 6142k freedapm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)apm: disabled - APM is not SMP safe.audit: initializing netlink socket (disabled)type=2000 audit(1271417996.630:1): initializedhighmem bounce pool size: 64 pagesHugeTLB registered 2 MB page size, pre-allocated 0 pagesVFS: Disk quotas dquot_6.5.2Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)msgmni has been set to 1684alg: No test for stdrng (krng)Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)io scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registered (default)pci 0000:01:00.0: Boot video devicepcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-Xpcieport-driver 0000:00:01.0: setting latency timer to 64pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-Xpcieport-driver 0000:00:1c.0: setting latency timer to 64pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-Xpcieport-driver 0000:00:1c.4: setting latency timer to 64pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-Xpcieport-driver 0000:00:1c.5: setting latency timer to 64vesafb: cannot reserve video memory at 0xd0000000vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 1875k, total 524288kvesafb: mode is 800x600x16, linelength=1600, pages=2vesafb: protected mode interface info at c000:d2f0vesafb: pmi: set display start = c00cd326, set palette = c00cd390vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redrawvesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0Console: switching to colour frame buffer device 100x37fb0: VESA VGA frame buffer deviceisapnp: Scanning for PnP cards...isapnp: No Plug & Play device foundLinux agpgart interface v0.103Serial: 8250/16550 driver, 4 ports, IRQ sharing enabledserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550Abrd: module loadedPNP: No PS/2 controller found. Probing ports directly.serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all micertc_cmos 00:03: RTC can wake from S4rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqscpuidle: using governor laddercpuidle: using governor menuTCP cubic registeredUsing IPI No-Shortcut modePM: Resume from disk failed.registered taskstats version 1 Magic number: 6:487:681rtc_cmos 00:03: setting system clock to 2010-04-16 11:39:57 UTC (1271417997)BIOS EDD facility v0.16 2004-Jun-25, 2 devices foundFreeing unused kernel memory: 448k freedusbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbusbcore: registered new interface driver hiddevusbcore: registered new interface driver usbhidusbhid: v2.6:USB HID core driverehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driverehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18ehci_hcd 0000:00:1a.7: setting latency timer to 64ehci_hcd 0000:00:1a.7: EHCI Host Controllerehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:1a.7: debug port 1ehci_hcd 0000:00:1a.7: cache line size of 32 is not supportedehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00usb usb1: New USB device found, idVendor=1d6b, idProduct=0002usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb1: Product: EHCI Host Controllerusb usb1: Manufacturer: Linux 2.6.31.12-server-3mnb ehci_hcdusb usb1: SerialNumber: 0000:00:1a.7usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 6 ports detectedehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23ehci_hcd 0000:00:1d.7: setting latency timer to 64ehci_hcd 0000:00:1d.7: EHCI Host Controllerehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2ehci_hcd 0000:00:1d.7: debug port 1ehci_hcd 0000:00:1d.7: cache line size of 32 is not supportedehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00usb usb2: New USB device found, idVendor=1d6b, idProduct=0002usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb2: Product: EHCI Host Controllerusb usb2: Manufacturer: Linux 2.6.31.12-server-3mnb ehci_hcdusb usb2: SerialNumber: 0000:00:1d.7usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 6 ports detectedohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driveruhci_hcd: USB Universal Host Controller Interface driveruhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16uhci_hcd 0000:00:1a.0: setting latency timer to 64uhci_hcd 0000:00:1a.0: UHCI Host Controlleruhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800usb usb3: New USB device found, idVendor=1d6b, idProduct=0001usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb3: Product: UHCI Host Controllerusb usb3: Manufacturer: Linux 2.6.31.12-server-3mnb uhci_hcdusb usb3: SerialNumber: 0000:00:1a.0usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 2 ports detecteduhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21uhci_hcd 0000:00:1a.1: setting latency timer to 64uhci_hcd 0000:00:1a.1: UHCI Host Controlleruhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880usb usb4: New USB device found, idVendor=1d6b, idProduct=0001usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb4: Product: UHCI Host Controllerusb usb4: Manufacturer: Linux 2.6.31.12-server-3mnb uhci_hcdusb usb4: SerialNumber: 0000:00:1a.1usb usb4: configuration #1 chosen from 1 choicehub 4-0:1.0: USB hub foundhub 4-0:1.0: 2 ports detecteduhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18uhci_hcd 0000:00:1a.2: setting latency timer to 64uhci_hcd 0000:00:1a.2: UHCI Host Controlleruhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00usb usb5: New USB device found, idVendor=1d6b, idProduct=0001usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb5: Product: UHCI Host Controllerusb usb5: Manufacturer: Linux 2.6.31.12-server-3mnb uhci_hcdusb usb5: SerialNumber: 0000:00:1a.2usb usb5: configuration #1 chosen from 1 choicehub 5-0:1.0: USB hub foundhub 5-0:1.0: 2 ports detecteduhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23uhci_hcd 0000:00:1d.0: setting latency timer to 64uhci_hcd 0000:00:1d.0: UHCI Host Controlleruhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080usb usb6: New USB device found, idVendor=1d6b, idProduct=0001usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb6: Product: UHCI Host Controllerusb usb6: Manufacturer: Linux 2.6.31.12-server-3mnb uhci_hcdusb usb6: SerialNumber: 0000:00:1d.0usb usb6: configuration #1 chosen from 1 choicehub 6-0:1.0: USB hub foundhub 6-0:1.0: 2 ports detecteduhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19uhci_hcd 0000:00:1d.1: setting latency timer to 64uhci_hcd 0000:00:1d.1: UHCI Host Controlleruhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400usb usb7: New USB device found, idVendor=1d6b, idProduct=0001usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb7: Product: UHCI Host Controllerusb usb7: Manufacturer: Linux 2.6.31.12-server-3mnb uhci_hcdusb usb7: SerialNumber: 0000:00:1d.1usb usb7: configuration #1 chosen from 1 choicehub 7-0:1.0: USB hub foundhub 7-0:1.0: 2 ports detecteduhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18uhci_hcd 0000:00:1d.2: setting latency timer to 64uhci_hcd 0000:00:1d.2: UHCI Host Controlleruhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480usb usb8: New USB device found, idVendor=1d6b, idProduct=0001usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb8: Product: UHCI Host Controllerusb usb8: Manufacturer: Linux 2.6.31.12-server-3mnb uhci_hcdusb usb8: SerialNumber: 0000:00:1d.2usb usb8: configuration #1 chosen from 1 choicehub 8-0:1.0: USB hub foundhub 8-0:1.0: 2 ports detectedSCSI subsystem initializedlibata version 3.00 loaded.ata_piix 0000:00:1f.2: version 2.13ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]ata_piix 0000:00:1f.2: setting latency timer to 64scsi0 : ata_piixscsi1 : ata_piixata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]ata_piix 0000:00:1f.5: setting latency timer to 64scsi2 : ata_piixscsi3 : ata_piixata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19ata3: SATA link down (SStatus 0 SControl 300)ata4: SATA link down (SStatus 0 SControl 300)usb 7-1: new full speed USB device using uhci_hcd and address 2ata2.00: SATA link down (SStatus 0 SControl 300)ata2.01: SATA link down (SStatus 0 SControl 300)usb 7-1: New USB device found, idVendor=045e, idProduct=0724usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0usb 7-1: Product: SideWinder™ Mouseusb 7-1: Manufacturer: Microsoftusb 7-1: configuration #1 chosen from 1 choiceinput: Microsoft SideWinder™ Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input0generic-usb 0003:045E:0724.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft SideWinder™ Mouse] on usb-0000:00:1d.1-1/input0ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)ata1.00: ATA-8: ST31000333AS, CC1F, max UDMA/133ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)ata1.01: ATA-7: HDS728080PLA380, PF2OA60A, max UDMA/133ata1.01: 160836480 sectors, multi 16: LBA48 NCQ (depth 0/32)ata1.00: configured for UDMA/133ata1.01: configured for UDMA/133scsi 0:0:0:0: Direct-Access ATA ST31000333AS CC1F PQ: 0 ANSI: 5scsi 0:0:1:0: Direct-Access ATA HDS728080PLA380 PF2O PQ: 0 ANSI: 5sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:sd 0:0:1:0: [sdb] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB)sd 0:0:1:0: [sdb] Write Protect is offsd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sda1 sda2 sda3 <usb 8-1: new low speed USB device using uhci_hcd and address 2 sdb1 sdb2 sda5 sda6 > sda4sd 0:0:1:0: [sdb] Attached SCSI disksd 0:0:0:0: [sda] Attached SCSI diskpata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16pata_acpi 0000:03:00.0: setting latency timer to 64pata_acpi 0000:03:00.0: PCI INT A disabledUniform Multi-Platform E-IDE driveride-gd driver 1.18pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16pata_marvell 0000:03:00.0: setting latency timer to 64scsi4 : pata_marvellscsi5 : pata_marvellata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16ata6: DUMMYusb 8-1: New USB device found, idVendor=045e, idProduct=071dusb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0usb 8-1: Product: Microsoft® 2.4GHz Transceiver V1.0usb 8-1: Manufacturer: Microsoftusb 8-1: configuration #1 chosen from 1 choiceinput: Microsoft Microsoft® 2.4GHz Transceiver V1.0 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1generic-usb 0003:045E:071D.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver V1.0] on usb-0000:00:1d.2-1/input0ata5.00: ATAPI: HL-DT-ST RW/DVD GCC-4521B, 1.05, max UDMA/33ata5.00: configured for UDMA/33scsi 4:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4521B 1.05 PQ: 0 ANSI: 5input: Microsoft Microsoft® 2.4GHz Transceiver V1.0 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input2generic-usb 0003:045E:071D.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver V1.0] on usb-0000:00:1d.2-1/input1EXT4-fs (sda6): INFO: recovery required on readonly filesystemEXT4-fs (sda6): write access will be enabled during recoveryEXT4-fs (sda6): barriers enabledkjournald2 starting: pid 75, dev sda6:8, commit interval 5 secondsEXT4-fs (sda6): delayed allocation enabledEXT4-fs: file extents enabledEXT4-fs: mballoc enabledEXT4-fs (sda6): orphan cleanup on readonly fsEXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 131103EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 131093EXT4-fs (sda6): 2 orphan inodes deletedEXT4-fs (sda6): recovery completeEXT4-fs (sda6): mounted filesystem with ordered data modeTomoyo security MAC extension available but disabled by default. If you want toenable and use it, ccs-tools package must be installed.udev: starting version 146sd 0:0:0:0: Attached scsi generic sg0 type 0sd 0:0:1:0: Attached scsi generic sg1 type 0scsi 4:0:0:0: Attached scsi generic sg2 type 5input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3ACPI: Power Button [PWRF]input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4ACPI: Power Button [PWRB]sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda trayUniform CD-ROM driver Revision: 3.20sr 4:0:0:0: Attached scsi CD-ROM sr0i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]ACPI: If an ACPI driver is available for this device, you should use it instead of the native driverinput: PC Speaker as /devices/platform/pcspkr/input/input5ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17ATL1E 0000:02:00.0: setting latency timer to 64iTCO_vendor_support: vendor-support=0ACPI: SSDT cff8e0d0 002B9 (v01 DpgPmm P001Ist 00000011 INTL 20060113)processor LNXCPU:00: registered as cooling_device0ACPI: SSDT cff8e390 002B9 (v01 DpgPmm P002Ist 00000012 INTL 20060113)processor LNXCPU:01: registered as cooling_device1iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)Floppy drive(s): fd0 is 1.44MFDC 0 is a post-1991 82077gameport: EMU10K1 is pci0000:05:02.1/gameport0, io 0xec00, speed 1065kHzHDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22HDA Intel 0000:00:1b.0: setting latency timer to 64EMU10K1_Audigy 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6device-mapper: uevent: version 1.0.3device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.comdevice-mapper: table: 252:0: linear: dm-linear: Device lookup faileddevice-mapper: ioctl: error adding target to tableEXT4-fs (sda6): internal journal on sda6:8loop: module loadedNET: Registered protocol family 10lo: Disabled Privacy ExtensionsATL1E 0000:02:00.0: irq 28 for MSI/MSI-XATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>ADDRCONF(NETDEV_UP): eth0: link is not readyADDRCONF(NETDEV_CHANGE): eth0: link becomes readynvidia: module license 'NVIDIA' taints kernel.Disabling lock debugging due to kernel taintNET: Registered protocol family 17nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16nvidia 0000:01:00.0: setting latency timer to 64NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009ip_tables: (C) 2000-2006 Netfilter Core TeamNetfilter messages via NETLINK v0.30.nf_conntrack version 0.5.0 (16384 buckets, 65536 max)CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please usenf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option orsysctl net.netfilter.nf_conntrack_acct=1 to enable it.ctnetlink v0.93: registering with nfnetlink.ClusterIP Version 0.8 loaded successfullyxt_time: kernel timezone is +0100netfilter PSD loaded - (c) astaro AGIFWLOG: register targeteth0: no IPv6 routers presentCPU0 attaching NULL sched-domain.CPU1 attaching NULL sched-domain.CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0fuse init (API version 7.12)