rendered paste bodyLinux version 2.6.32-ARCH (thomas@evey) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Mon Mar 15 20:44:03 CET 2010
Command line: root=/dev/disk/by-uuid/4e569747-3482-4f49-aa31-f3707463ce6d ro i915.modesetting=1
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f670000 (usable)
BIOS-e820: 000000003f670000 - 000000003f700000 (ACPI NVS)
BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x3f670 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03F700000 mask FFFF00000 uncachable
2 base 03F800000 mask FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (usable)
modified: 0000000000001000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003f670000 (usable)
modified: 000000003f670000 - 000000003f700000 (ACPI NVS)
modified: 000000003f700000 - 0000000040000000 (reserved)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed00000 - 00000000fed00400 (reserved)
modified: 00000000fed14000 - 00000000fed1a000 (reserved)
modified: 00000000fed1c000 - 00000000fed90000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000003f670000
0000000000 - 003f600000 page 2M
003f600000 - 003f670000 page 4k
kernel direct mapping tables up to 3f670000 @ 8000-b000
RAMDISK: 37de0000 - 37fef01b
ACPI: RSDP 00000000000f7c60 00024 (v02 HP )
ACPI: XSDT 000000003f67a9c6 00084 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
ACPI: FACP 000000003f683d6e 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
ACPI: DSDT 000000003f67c75d 0759D (v01 HP 30BB 06040000 MSFT 0100000E)
ACPI: FACS 000000003f684fc0 00040
ACPI: APIC 000000003f683e62 00068 (v01 HP 30BB 06040000 LOHR 0000005A)
ACPI: HPET 000000003f683eca 00038 (v01 HP 30BB 06040000 LOHR 0000005A)
ACPI: MCFG 000000003f683f02 0003C (v01 HP 30BB 06040000 LOHR 0000005A)
ACPI: TCPA 000000003f683f3e 00032 (v01 HP 30BB 06040000 PTL 00000001)
ACPI: APIC 000000003f683f70 00068 (v01 HP 30BB 06040000 LTP 00000000)
ACPI: BOOT 000000003f683fd8 00028 (v01 HP 30BB 06040000 LTP 00000001)
ACPI: SSDT 000000003f67c10e 0064F (v01 HP 30BB 00001000 INTL 20050624)
ACPI: SSDT 000000003f67ba7c 00692 (v01 HP 30BB 00001000 INTL 20050624)
ACPI: SSDT 000000003f67afd6 0025F (v01 HP 30BB 00003000 INTL 20050624)
ACPI: SSDT 000000003f67af30 000A6 (v01 HP 30BB 00003000 INTL 20050624)
ACPI: SSDT 000000003f67aa4a 004E6 (v01 HP 30BB 00003000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 003f670000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000169f898] TEXT DATA BSS ==> [0001000000 - 000169f898]
#3 [0037de0000 - 0037fef01b] RAMDISK ==> [0037de0000 - 0037fef01b]
#4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#5 [00016a0000 - 00016a0160] BRK ==> [00016a0000 - 00016a0160]
#6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
found SMP MP-table at [ffff8800000f7d10] f7d10
[ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001c00000-ffff8800029fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000001
0: 0x00000006 -> 0x0000009f
0: 0x00000100 -> 0x0003f670
On node 0 totalpages: 259594
DMA zone: 56 pages used for memmap
DMA zone: 100 pages reserved
DMA zone: 3838 pages, LIFO batch:0
DMA32 zone: 3495 pages used for memmap
DMA32 zone: 252105 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000001000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88984 r8192 d21608 u1048576
pcpu-alloc: s88984 r8192 d21608 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255943
Kernel command line: root=/dev/disk/by-uuid/4e569747-3482-4f49-aa31-f3707463ce6d ro i915.modesetting=1
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1012412k/1038784k available (3315k kernel code, 408k absent, 25296k reserved, 1757k data, 476k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:768
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration failed
TSC: PIT calibration matches HPET. 1 loops
Detected 1729.534 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3460.19 BogoMIPS (lpj=5765113)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU T5300 @ 1.73GHz stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring handled by SMI
CPU1: Intel(R) Core(TM)2 CPU T5300 @ 1.73GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6920.35 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI Error (psargs-0359): [Z012] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f014040), AE_NOT_FOUND
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xd8100000-0xd817ffff]
pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
pci 0000:00:02.0: reg 18 32bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xd8200000-0xd823ffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xd8180000-0xd81fffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xd8240000-0xd8243fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xd8444000-0xd84443ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x18c0-0x18df]
pci 0000:02:00.0: reg 10 64bit mmio: [0xd6000000-0xd6003fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xd6000000-0xd7ffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd2000000-0xd3ffffff]
pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xd4000000-0xd5ffffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd0000000-0xd1ffffff]
pci 0000:05:05.0: reg 10 32bit mmio: [0xd8001000-0xd80017ff]
pci 0000:05:05.0: supports D1 D2
pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:05.0: PME# disabled
pci 0000:05:05.1: reg 10 32bit mmio: [0xd8001800-0xd80018ff]
pci 0000:05:05.1: supports D1 D2
pci 0000:05:05.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:05.1: PME# disabled
pci 0000:05:05.2: reg 10 32bit mmio: [0xd8001c00-0xd8001cff]
pci 0000:05:05.2: supports D1 D2
pci 0000:05:05.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:05.2: PME# disabled
pci 0000:05:05.3: reg 10 32bit mmio: [0xd8002000-0xd80020ff]
pci 0000:05:05.3: supports D1 D2
pci 0000:05:05.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:05.3: PME# disabled
pci 0000:05:05.4: reg 10 32bit mmio: [0xd8002400-0xd80024ff]
pci 0000:05:05.4: supports D1 D2
pci 0000:05:05.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:05.4: PME# disabled
pci 0000:05:08.0: reg 10 32bit mmio: [0xd8000000-0xd8000fff]
pci 0000:05:08.0: reg 14 io port: [0x4000-0x403f]
pci 0000:05:08.0: supports D1 D2
pci 0000:05:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:08.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x4000-0x4fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xd8000000-0xd80fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI Error (psargs-0359): [Z012] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f014040), AE_NOT_FOUND
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:02: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:02: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:02: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:06: ioport range 0x380-0x383 has been reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:07: ioport range 0x6a0-0x6af has been reserved
system 00:07: ioport range 0x6b0-0x6ff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x2000-0x2fff
pci 0000:00:1c.0: MEM window: 0xd6000000-0xd7ffffff
pci 0000:00:1c.0: PREFETCH window: 0x000000d2000000-0x000000d3ffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0x3000-0x3fff
pci 0000:00:1c.1: MEM window: 0xd4000000-0xd5ffffff
pci 0000:00:1c.1: PREFETCH window: 0x000000d0000000-0x000000d1ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: IO window: 0x4000-0x4fff
pci 0000:00:1e.0: MEM window: 0xd8000000-0xd80fffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: enabling device (0004 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:02: resource 1 mem: [0xd6000000-0xd7ffffff]
pci_bus 0000:02: resource 2 pref mem [0xd2000000-0xd3ffffff]
pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:03: resource 1 mem: [0xd4000000-0xd5ffffff]
pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xd1ffffff]
pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:05: resource 1 mem: [0xd8000000-0xd80fffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:05:08.0: Firmware left e100 interrupts enabled; disabling
Unpacking initramfs...
Freeing initrd memory: 2108k freed
Simple Boot Flag at 0x35 set to 0x1
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1270256561.289:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1982
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 476k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
acpi device:08: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input2
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
i915: Unknown parameter `modesetting'
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
i915: Unknown parameter `modesetting'
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8444000
SCSI subsystem initialized
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
usb 1-3: new high speed USB device using ehci_hcd and address 2
ata1.00: ATA-7: ST9120821AS, 7.24, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48
ata2.00: ATAPI: Optiarc DVD RW AD-7530A, EH31, max MWDMA2
ata1.00: configured for UDMA/100
ata2.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA ST9120821AS 7.24 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7530A EH31 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
usb 1-3: configuration #1 chosen from 1 choice
sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: [sda] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
udev: starting version 151
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
i915: Unknown parameter `modesetting'
intel_rng: FWH not detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x18c0-0x18df] conflicts with ACPI region SMBI [0x18c0-0x18cf]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
b43-pci-bridge 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
b43-pci-bridge 0000:02:00.0: setting latency timer to 64
ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THR1] (38 C)
ACPI: SSDT 000000003f67b77c 00238 (v01 HP 30BB 00003000 INTL 20050624)
ACPI: SSDT 000000003f67b235 004C2 (v01 HP 30BB 00003001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
processor LNXCPU:00: registered as cooling_device1
ACPI: SSDT 000000003f67b9b4 000C8 (v01 HP 30BB 00003000 INTL 20050624)
ACPI: SSDT 000000003f67b6f7 00085 (v01 HP 30BB 00003000 INTL 20050624)
Initializing USB Mass Storage driver...
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:05:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e100 0000:05:08.0: setting latency timer to 64
ACPI: WMI: Mapper loaded
Switching to clocksource hpet
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
scsi2 : SCSI emulation for USB Mass Storage devices
processor LNXCPU:01: registered as cooling_device2
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
i915: Unknown parameter `modesetting'
ACPI: AC Adapter [ACAD] (on-line)
e100 0000:05:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xd8000000, irq 20, MAC addr 00:1b:24:4b:8b:71
ricoh-mmc: Ricoh MMC controller found at 0000:05:05.2 [1180:0843] (rev 1)
ricoh-mmc: Controller is now disabled.
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
ACPI: Battery Slot [BAT0] (battery present)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:05:05.1: SDHCI controller found [1180:0822] (rev 19)
sdhci-pci 0000:05:05.1: enabling device (0000 -> 0002)
sdhci-pci 0000:05:05.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
sdhci-pci 0000:05:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:05:05.1: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:05:05.1] using DMA
firewire_ohci 0000:05:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
firewire_ohci 0000:05:05.0: setting latency timer to 64
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
firewire_ohci: Added fw-ohci device 0000:05:05.0, OHCI version 1.10
cfg80211: Calling CRDA to update world regulatory domain
firewire_core: created device fw0: GUID 00241b00f87d2400, S400
b43-phy0: Broadcom 4311 WLAN found (core revision 13)
phy0: Selected rate control algorithm 'minstrel'
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
EXT3 FS on sda8, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 1534168k swap on /dev/sda7. Priority:-1 extents:1 across:1534168k
e100: eth0 NIC Link is Up 100 Mbps Full Duplex
scsi 2:0:0:0: Direct-Access USB Flash Memory PMAP PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 2:0:0:0: [sdb] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
i915: Unknown parameter `modesetting'
PPP generic driver version 2.4.2
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
PPP BSD Compression module registered
eth0: no IPv6 routers present