rendered paste body[root@happy root]# rmmod ivtv
[root@happy root]# depmod -a
[root@happy root]# service mythbackend stop
Stopping mythbackend: [ OK ]
[root@happy root]# depmod -a
[root@happy root]# rmmod ivtv tuner msp3400 saa7115 ivtv-fb tveeprom
ERROR: Module ivtv does not exist in /proc/modules
ERROR: Module ivtv_fb does not exist in /proc/modules
[root@happy root]# modprobe ivtv
[root@happy root]# service mythbackend start
Starting mythbackend: [ OK ]
[root@happy root]# dmesg
ivtv: Removing Card #0.
ivtv: Stopping all streams.
ivtv: Stopping decoding.
ivtv: Disabling interrupts.
ivtv: Flushing Work Queues.
ivtv: Cancel Work Queues.
ivtv: Destroy Work Queues.
ivtv: Stopping Threads.
ivtv: Stopping Firmware.
ivtv: Removed WinTV PVR 250, card #0
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (0.2.0-54_rc1h.rhfc2.at) loading
ivtv: Linux version: 2.6.8-1.521 686 REGPARM 4KSTACKS gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC16 based chip
PCI: Found IRQ 11 for device 0000:00:09.0
ivtv: VIA PCI device: 0x0691 vendor: 0x1106
tveeprom: Hauppauge: model = 32032, rev = B310, serial# = 6983981
tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type = 2)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3440 (type = 11)
ivtv: i2c attach [client=tveeprom[0],ok]
ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x00893450, Revision 0x00000000
ivtv: NTSC tuner detected
ivtv: Radio detected
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
saa7115: status: (1E) 0x81, (1F) 0xb1
msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio mode=simpler
ivtv: i2c attach [client=MSP3448W-A2,ok]
ivtv: Encoder revision: 0x02040024
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Create DMA stream 0 using 32 131072 byte buffers 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1 using 16 131072 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 16 131072 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Setting Tuner 2
ivtv: ivtv_enc_thread: pid = 5097, itv = 0x32d1d920
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #0
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: Initialized WinTV PVR 250, card #0
ivtv: ==================== END INIT IVTV ====================
saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder disable output
ivtv: v4l2 ioctl: set frequency 980
saa7115: decoder enable output
ivtv: Finished with reset in 100 ms
ivtv: Finished with Mute