root

smartctl 5.40 2010-02-03 r3060 [x86_64-unknown-linux-gnu] (local build)Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net=== START OF INFORMATION SECTION ===Model Family:     Hitachi Deskstar 7K80 seriesDevice Model:     HDS728080PLA380      39M3701 26K5308IBMSerial Number:    PFDB32S7UN2JLNFirmware Version: PF2OA65AUser Capacity:    80,032,038,912 bytesDevice is:        In smartctl database [for details use: -P show]ATA Version is:   7ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 1Local Time is:    Wed Mar 24 14:11:41 2010 CETSMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:Offline data collection status:  (0x80)	Offline data collection activity					was never started.					Auto Offline Data Collection: Enabled.Self-test execution status:      (   0)	The previous self-test routine completed					without error or no self-test has ever 					been run.Total time to complete Offline data collection: 		 (1828) seconds.Offline data collectioncapabilities: 			 (0x5b) SMART execute Offline immediate.					Auto Offline data collection on/off support.					Suspend Offline collection upon new					command.					Offline surface scan supported.					Self-test supported.					No Conveyance Self-test supported.					Selective Self-test supported.SMART capabilities:            (0x0003)	Saves SMART data before entering					power-saving mode.					Supports SMART auto save timer.Error logging capability:        (0x01)	Error logging supported.					General Purpose Logging supported.Short self-test routine recommended polling time: 	 (   1) minutes.Extended self-test routinerecommended polling time: 	 (  31) minutes.SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0  2 Throughput_Performance  0x0005   158   158   050    Pre-fail  Offline      -       213  3 Spin_Up_Time            0x0007   101   101   024    Pre-fail  Always       -       197 (Average 197)  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       61  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0  8 Seek_Time_Performance   0x0005   142   142   020    Pre-fail  Offline      -       28  9 Power_On_Hours          0x0012   096   096   000    Old_age   Always       -       29797 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       61192 Power-Off_Retract_Count 0x0032   100   100   050    Old_age   Always       -       344193 Load_Cycle_Count        0x0012   100   100   050    Old_age   Always       -       344194 Temperature_Celsius     0x0002   161   161   000    Old_age   Always       -       34 (Lifetime Min/Max 12/37)196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       0SMART Error Log Version: 1No Errors LoggedSMART Self-test log structure revision number 1Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error# 1  Extended offline    Completed without error       00%     29797         -Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.SMART Selective self-test log data structure revision number 1 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS    1        0        0  Not_testing    2        0        0  Not_testing    3        0        0  Not_testing    4        0        0  Not_testing    5        0        0  Not_testingSelective self-test flags (0x0):  After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.