# sensors-detect revision 5822 (2010-02-04 09:14:10 +0100)# System: NVIDIA MCP7AThis program will help you determine which kernel modules you needto load to use lm_sensors most effectively. It is generally safeand recommended to accept the default answers to all questions,unless you know what you're doing.Some south bridges, CPUs or memory controllers contain embedded sensors.Do you want to scan for them? This is totally safe. (YES/no): Silicon Integrated Systems SIS5595... NoVIA VT82C686 Integrated Sensors... NoVIA VT8231 Integrated Sensors... NoAMD K8 thermal sensors... NoAMD Family 10h thermal sensors... NoAMD Family 11h thermal sensors... NoIntel Core family thermal sensor... Success! (driver `coretemp')Intel Atom thermal sensor... NoIntel AMB FB-DIMM thermal sensor... NoVIA C7 thermal sensor... NoVIA Nano thermal sensor... NoSome Super I/O chips contain embedded sensors. We have to write tostandard I/O ports to probe them. This is usually safe.Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2fTrying family `National Semiconductor'... NoTrying family `SMSC'... NoTrying family `VIA/Winbond/Nuvoton/Fintek'... NoTrying family `ITE'... NoProbing for Super-I/O at 0x4e/0x4fTrying family `National Semiconductor'... NoTrying family `SMSC'... NoTrying family `VIA/Winbond/Nuvoton/Fintek'... NoTrying family `ITE'... NoSome systems (mainly servers) implement IPMI, a set of common interfacesthrough which system health data may be retrieved, amongst other things.We first try to get the information from SMBIOS. If we don't find itthere, we have to read from arbitrary I/O ports to probe for suchinterfaces. This is normally safe. Do you want to scan for IPMIinterfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... NoProbing for `IPMI BMC SMIC' at 0xca8... NoSome hardware monitoring chips are accessible through the ISA I/O ports.We have to write to arbitrary I/O ports to probe them. This is usuallysafe though. Yes, you do have ISA I/O ports even if you do not have anyISA slots! Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... NoProbing for `National Semiconductor LM79' at 0x290... NoProbing for `Winbond W83781D' at 0x290... NoProbing for `Winbond W83782D' at 0x290... NoLastly, we can probe the I2C/SMBus adapters for connected hardwaremonitoring devices. This is the most risky part, and while it worksreasonably well on most systems, it has been reported to cause troubleon some systems.Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-nforce2' for device 0000:00:03.2: nVidia Corporation nForce SMBus (MCP79)Module i2c-dev loaded successfully.Next adapter: SMBus nForce2 adapter at 1c00 (i2c-0)Do you want to scan it? (YES/no/selectively): Client found at address 0x50Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip)Probing for `EDID EEPROM'... NoNext adapter: NVIDIA i2c adapter (i2c-1)Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-2)Do you want to scan it? (YES/no/selectively): Next adapter: NVIDIA i2c adapter (i2c-3)Do you want to scan it? (YES/no/selectively): Client found at address 0x50Probing for `Analog Devices ADM1033'... NoProbing for `Analog Devices ADM1034'... NoProbing for `SPD EEPROM'... NoProbing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip)Now follows a summary of the probes I have just done.Just press ENTER to continue: Driver `coretemp': * Chip `Intel Core family thermal sensor' (confidence: 9)Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensorsfor initialization at boot time.You should now start the lm_sensors service to load the requiredkernel modules.Unloading i2c-dev... OKxbmc-live stop/waitingReading package lists...Building dependency tree...Reading state information...Reading extended state information...Initialising package states...Del linux-source-2.6.31 2.6.31-19.56 [62.2MB]Del nvidia-glx-195-dev 195.36.03-0ubuntu1~karmic~nvidiavdpauppa2 [182kB]Del nvidia-195-kernel-source 195.36.03-0ubuntu1~karmic~nvidiavdpauppa2 [12.9MB]Del linux-source 2.6.31.19.32 [3,366B]Del nvidia-glx-195 195.36.03-0ubuntu1~karmic~nvidiavdpauppa2 [19.8MB]Del linux-libc-dev 2.6.31-19.56 [743kB]Freed 95.8MB of disk spaceReading package lists...make: *** No rule to make target `install'. Stop.mv: cannot stat `/usr/local/share/xbmc': No such file or directorymake: *** No rule to make target `install'. Stop.--2010-03-21 19:16:21-- http://dl.dropbox.com/u/4953107/XCI/custom-actions.pklaResolving dl.dropbox.com... 75.101.142.97, 75.101.148.191, 174.129.33.139, ...Connecting to dl.dropbox.com|75.101.142.97|:80... connected.HTTP request sent, awaiting response... 200 OKLength: 215 [application/octet-stream]Saving to: `custom-actions.pkla' 0K 100% 19.4M=0s2010-03-21 19:16:22 (19.4 MB/s) - `custom-actions.pkla' saved [215/215]xbmc-live start/running, process 23553