rendered paste body[ 0.000000] BIOS EBDA/lowmem at: 00000000/000a0000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-17-linuxice2 (root@linuxice2) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #58 SMP Sat Jan 9 11:58:41 PST 2010 (Ubuntu 2.6.28-17.58-linuxice2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000093000 (usable)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000010000000 (usable)
[ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 10000000 @ 10000-15000
[ 0.000000] RAMDISK: 0f7c1000 - 0ffeff6d
[ 0.000000] ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080926]
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 10000000
[ 0.000000] low ram: 00000000 - 10000000
[ 0.000000] bootmap 00011000 - 00013000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0010000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008989ac] TEXT DATA BSS ==> [0000100000 - 00008989ac]
[ 0.000000] #4 [000f7c1000 - 000ffeff6d] RAMDISK ==> [000f7c1000 - 000ffeff6d]
[ 0.000000] #5 [0000899000 - 000089d000] INIT_PG_TABLE ==> [0000899000 - 000089d000]
[ 0.000000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 - 0000013000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00010000
[ 0.000000] HighMem 0x00010000 -> 0x00010000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000093
[ 0.000000] 0: 0x00000100 -> 0x00010000
[ 0.000000] On node 0 totalpages: 65414
[ 0.000000] free_area_init_node: node 0, pgdat c06ea800, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3942 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60960 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000093000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64902
[ 0.000000] Kernel command line: root=UUID=36d4593e-989f-41c9-bcb7-4673a6fc55cb ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 997.517 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.004000] allocated 1310720 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 241664k/262144k available (4190k kernel code, 19796k reserved, 2249k data, 536k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xd0800000 - 0xff3fe000 ( 747 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.004000] .init : 0xc0751000 - 0xc07d7000 ( 536 kB)
[ 0.004000] .data : 0xc05178cd - 0xc0749e60 (2249 kB)
[ 0.004000] .text : 0xc0100000 - 0xc05178cd (4190 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004026] Calibrating delay loop (skipped), value calculated using timer frequency.. 1995.03 BogoMIPS (lpj=3990068)
[ 0.004081] Security Framework initialized
[ 0.004114] SELinux: Disabled at boot.
[ 0.004175] AppArmor: AppArmor initialized
[ 0.004198] Mount-cache hash table entries: 512
[ 0.004584] Initializing cgroup subsys ns
[ 0.004596] Initializing cgroup subsys cpuacct
[ 0.004603] Initializing cgroup subsys memory
[ 0.004614] Initializing cgroup subsys freezer
[ 0.004657] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.004663] CPU: L2 cache: 256K
[ 0.004672] CPU serial number disabled.
[ 0.004713] Checking 'hlt' instruction... OK.
[ 0.021056] SMP alternatives: switching to UP code
[ 0.277170] Freeing SMP alternatives: 19k freed
[ 0.277577] weird, boot CPU (#0) not listedby the BIOS.
[ 0.277585] SMP motherboard not detected.
[ 0.277595] Local APIC not detected. Using dummy APIC emulation.
[ 0.277601] SMP disabled
[ 0.279139] Brought up 1 CPUs
[ 0.279165] Total of 1 processors activated (1995.03 BogoMIPS).
[ 0.279260] CPU0 attaching NULL sched-domain.
[ 0.280785] net_namespace: 776 bytes
[ 0.280814] Booting paravirtualized kernel on bare hardware
[ 0.281574] Time: 14:39:31 Date: 03/21/10
[ 0.281595] regulator: core version 0.5
[ 0.281744] NET: Registered protocol family 16
[ 0.282184] EISA bus registered
[ 0.314810] PCI: PCI BIOS revision 2.10 entry at 0xfaea0, last bus=1
[ 0.314818] PCI: Using configuration type 1 for base access
[ 0.317765] ACPI: Interpreter disabled.
[ 0.318317] SCSI subsystem initialized
[ 0.318468] libata version 3.00 loaded.
[ 0.318628] usbcore: registered new interface driver usbfs
[ 0.318682] usbcore: registered new interface driver hub
[ 0.318768] usbcore: registered new device driver usb
[ 0.319121] PCI: Probing PCI hardware
[ 0.319132] PCI: Probing PCI hardware (bus 00)
[ 0.319249] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.319330] pci 0000:00:01.0: supports D1
[ 0.319447] pci 0000:00:07.1: reg 20 io port: [0xd000-0xd00f]
[ 0.319514] pci 0000:00:07.2: reg 20 io port: [0xd400-0xd41f]
[ 0.319587] pci 0000:00:07.3: reg 20 io port: [0xd800-0xd81f]
[ 0.319675] pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon
[ 0.319683] pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB
[ 0.319732] pci 0000:00:0e.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.319743] pci 0000:00:0e.0: reg 14 32bit mmio: [0xda000000-0xda0000ff]
[ 0.319775] pci 0000:00:0e.0: supports D1 D2
[ 0.319781] pci 0000:00:0e.0: PME# supported from D1 D2 D3hot D3cold
[ 0.319790] pci 0000:00:0e.0: PME# disabled
[ 0.319844] pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xd8ffffff]
[ 0.319874] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x03ffff]
[ 0.319920] pci 0000:00:01.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
[ 0.320710] pci 0000:00:07.0: VIA IRQ router [1106:0686]
[ 0.321007] Bluetooth: Core ver 2.13
[ 0.321007] NET: Registered protocol family 31
[ 0.321007] Bluetooth: HCI device and connection manager initialized
[ 0.321007] Bluetooth: HCI socket layer initialized
[ 0.321007] NET: Registered protocol family 8
[ 0.321007] NET: Registered protocol family 20
[ 0.321007] NetLabel: Initializing
[ 0.321007] NetLabel: domain hash size = 128
[ 0.321007] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.321007] NetLabel: unlabeled traffic allowed by default
[ 0.321007] AppArmor: AppArmor Filesystem Enabled
[ 0.321007] pnp: PnP ACPI: disabled
[ 0.321007] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.321007] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbab0
[ 0.321007] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbad8, dseg 0xf0000
[ 0.321620] PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by driver
[ 0.321660] system 00:07: iomem range 0x0-0x9ffff could not be reserved
[ 0.321669] system 00:07: iomem range 0xfffe0000-0xffffffff could not be reserved
[ 0.321676] system 00:07: iomem range 0x100000-0xfffffff could not be reserved
[ 0.321690] system 00:08: iomem range 0xf0000-0xf3fff could not be reserved
[ 0.321697] system 00:08: iomem range 0xf4000-0xf7fff could not be reserved
[ 0.321704] system 00:08: iomem range 0xf8000-0xfffff could not be reserved
[ 0.321710] system 00:08: iomem range 0xc9800-0xcbfff has been reserved
[ 0.322212] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.322219] pci 0000:00:01.0: IO window: disabled
[ 0.322230] pci 0000:00:01.0: MEM window: 0xd8000000-0xd9ffffff
[ 0.322238] pci 0000:00:01.0: PREFETCH window: 0x00000020000000-0x000000200fffff
[ 0.322267] pci 0000:00:01.0: setting latency timer to 64
[ 0.322277] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.322283] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.322288] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.322293] bus: 01 index 1 mmio: [0xd8000000-0xd9ffffff]
[ 0.322298] bus: 01 index 2 mmio: [0x20000000-0x200fffff]
[ 0.322303] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.322337] NET: Registered protocol family 2
[ 0.322495] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.324628] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.325009] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.325394] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.325402] TCP reno registered
[ 0.325766] NET: Registered protocol family 1
[ 0.326210] checking if image is initramfs... it is
[ 1.911517] Freeing initrd memory: 8379k freed
[ 1.911760] cpufreq: No nForce2 chipset.
[ 1.912423] audit: initializing netlink socket (disabled)
[ 1.912500] type=2000 audit(1269182371.911:1): initialized
[ 1.930409] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.933974] VFS: Disk quotas dquot_6.5.1
[ 1.934160] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.936054] fuse init (API version 7.10)
[ 1.936298] msgmni has been set to 488
[ 1.937214] alg: No test for stdrng (krng)
[ 1.937256] io scheduler noop registered
[ 1.937262] io scheduler anticipatory registered
[ 1.937267] io scheduler deadline registered
[ 1.937350] io scheduler cfq registered (default)
[ 1.937400] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.937411] pci 0000:00:07.0: Disabling VIA external APIC routing
[ 1.937470] pci 0000:01:00.0: Boot video device
[ 1.937682] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.937721] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.938635] fb0: Asiliant 69000 frame buffer (2048K RAM detected)
[ 1.938883] isapnp: Scanning for PnP cards...
[ 2.293215] isapnp: No Plug & Play device found
[ 2.296185] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.296362] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.296512] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.297208] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.297443] 00:0e: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.299450] brd: module loaded
[ 2.300446] loop: module loaded
[ 2.300757] Fixed MDIO Bus: probed
[ 2.300778] PPP generic driver version 2.4.2
[ 2.300936] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.301047] Driver 'sd' needs updating - please use bus_type methods
[ 2.301071] Driver 'sr' needs updating - please use bus_type methods
[ 2.302429] pata_via 0000:00:07.1: version 0.3.3
[ 2.303095] scsi0 : pata_via
[ 2.303509] scsi1 : pata_via
[ 2.303624] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 2.303632] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 2.628489] ata2.00: ATA-5: TOSHIBA MK4019GAXB, FB002B, max UDMA/100
[ 2.628497] ata2.00: 78140160 sectors, multi 16: LBA
[ 2.628554] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 2.636530] ata2.00: configured for UDMA/33
[ 2.636977] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK4019GA FB00 PQ: 0 ANSI: 5
[ 2.637297] sd 1:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.637348] sd 1:0:0:0: [sda] Write Protect is off
[ 2.637355] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.637428] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.637634] sd 1:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.637675] sd 1:0:0:0: [sda] Write Protect is off
[ 2.637681] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.637750] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.637762] sda: sda1 sda2 < sda5 >
[ 2.680758] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.680936] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.681443] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.681493] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.681530] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.681726] PCI: setting IRQ 10 as level-triggered
[ 2.681734] uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 10
[ 2.681757] uhci_hcd 0000:00:07.2: sharing IRQ 10 with 0000:00:07.3
[ 2.681768] uhci_hcd 0000:00:07.2: sharing IRQ 10 with 0000:00:0e.0
[ 2.681795] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 2.681974] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 2.682026] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400
[ 2.682320] usb usb1: configuration #1 chosen from 1 choice
[ 2.682394] hub 1-0:1.0: USB hub found
[ 2.682426] hub 1-0:1.0: 2 ports detected
[ 2.682692] uhci_hcd 0000:00:07.3: found PCI INT D -> IRQ 10
[ 2.682709] uhci_hcd 0000:00:07.3: sharing IRQ 10 with 0000:00:07.2
[ 2.682721] uhci_hcd 0000:00:07.3: sharing IRQ 10 with 0000:00:0e.0
[ 2.682739] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 2.682894] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[ 2.682927] uhci_hcd 0000:00:07.3: irq 10, io base 0x0000d800
[ 2.683141] usb usb2: configuration #1 chosen from 1 choice
[ 2.683206] hub 2-0:1.0: USB hub found
[ 2.683238] hub 2-0:1.0: 2 ports detected
[ 2.683590] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[ 2.683598] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.683725] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.684136] mice: PS/2 mouse device common for all mice
[ 2.684354] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.684396] rtc0: alarms up to one day, 114 bytes nvram
[ 2.684652] device-mapper: uevent: version 1.0.3
[ 2.685073] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.685239] device-mapper: multipath: version 1.0.5 loaded
[ 2.685249] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.685545] EISA: Probing bus 0 at eisa.0
[ 2.685587] Cannot allocate resource for EISA slot 5
[ 2.685592] Cannot allocate resource for EISA slot 6
[ 2.685607] EISA: Detected 0 cards.
[ 2.685704] cpuidle: using governor ladder
[ 2.685710] cpuidle: using governor menu
[ 2.687193] TCP cubic registered
[ 2.687531] NET: Registered protocol family 10
[ 2.688771] lo: Disabled Privacy Extensions
[ 2.689627] NET: Registered protocol family 17
[ 2.689708] Bluetooth: L2CAP ver 2.11
[ 2.689713] Bluetooth: L2CAP socket layer initialized
[ 2.689721] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.689726] Bluetooth: SCO socket layer initialized
[ 2.689929] Bluetooth: RFCOMM socket layer initialized
[ 2.689963] Bluetooth: RFCOMM TTY layer initialized
[ 2.689967] Bluetooth: RFCOMM ver 1.10
[ 2.690089] IO APIC resources could be not be allocated.
[ 2.690156] Using IPI No-Shortcut mode
[ 2.690460] TuxOnIce 3.0.99.44 (http://tuxonice.net)
[ 2.690648] Scanning swap devices for TuxOnIce signature...
[ 2.703180] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.718976] - Trying 8:5.
[ 2.719441] TuxOnIce scan: No image found.
[ 2.719826] TuxOnIce: No image found.
[ 2.720497] PM: Resume from partition 8:5
[ 2.720503] PM: Checking hibernation image.
[ 2.723181] PM: Resume from disk failed.
[ 2.723254] registered taskstats version 1
[ 2.723469] Magic number: 2:177:688
[ 2.723625] rtc_cmos 00:03: setting system clock to 2010-03-21 14:39:33 UTC (1269182373)
[ 2.723634] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.723639] EDD information not available.
[ 2.726067] Freeing unused kernel memory: 536k freed
[ 2.726461] Write protecting the kernel text: 4192k
[ 2.726559] Write protecting the kernel read-only data: 1568k
[ 3.181383] Console: switching to colour frame buffer device 80x30
[ 3.415800] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.416257] 8139cp 0000:00:0e.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 3.426626] 8139too Fast Ethernet driver 0.9.28
[ 3.426769] 8139too 0000:00:0e.0: found PCI INT A -> IRQ 10
[ 3.426795] 8139too 0000:00:0e.0: sharing IRQ 10 with 0000:00:07.2
[ 3.426803] 8139too 0000:00:0e.0: sharing IRQ 10 with 0000:00:07.3
[ 3.428719] eth0: RealTek RTL8139 at 0xe800, 00:0b:ab:00:ce:c4, IRQ 10
[ 3.428726] eth0: Identified 8139 chip type 'RTL-8139C'
[ 4.480515] PM: Starting manual resume from disk
[ 4.481883] PM: Resume from partition 8:5
[ 4.481889] PM: Checking hibernation image.
[ 4.482306] PM: Resume from disk failed.
[ 4.554352] kjournald starting. Commit interval 5 seconds
[ 4.554408] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.977076] udev: starting version 141
[ 7.211902] udev: renamed network interface eth0 to eth1
[ 7.523394] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 7.659449] Linux agpgart interface v0.103
[ 7.732309] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.756298] parport_pc: VIA 686A/8231 detected
[ 7.756310] parport_pc: probing current configuration
[ 7.756334] parport_pc: Current parallel port base: 0x0
[ 7.756341] parport_pc: VIA parallel port disabled in BIOS
[ 7.803259] agpgart: Detected VIA Apollo Pro 133 chipset
[ 7.811176] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 8.849997] ppdev: user-space parallel port driver
[ 9.157035] lp: driver loaded but no devices found
[ 9.663236] Adding 730916k swap on /dev/sda5. Priority:-1 extents:1 across:730916k
[ 10.141124] EXT3 FS on sda1, internal journal
[ 12.167805] type=1505 audit(1269182382.940:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1400
[ 12.168969] type=1505 audit(1269182382.944:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1400
[ 12.169424] type=1505 audit(1269182382.944:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1400
[ 12.169697] type=1505 audit(1269182382.944:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1400
[ 12.632046] type=1505 audit(1269182383.404:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1405
[ 12.633559] type=1505 audit(1269182383.408:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1405
[ 12.740969] type=1505 audit(1269182383.516:8): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1409
[ 20.039576] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.039588] Bluetooth: BNEP filters: protocol multicast
[ 20.089243] Bridge firewalling registered
[ 24.228919] eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 35.003796] eth1: no IPv6 routers present
Module Size Used by
bridge 56212 0
stp 10500 1 bridge
bnep 20224 2
lp 17156 0
ppdev 15620 0
via_agp 16256 1
via686a 20876 0
parport_pc 40100 0
shpchp 40212 0
i2c_viapro 15892 0
agpgart 42696 1 via_agp
parport 42220 3 lp,ppdev,parport_pc
pcspkr 10496 0
8139too 32128 0
8139cp 27776 0
mii 13312 2 8139too,8139cp
fbcon 46112 71
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit