rendered paste bodyignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[ 0.144388] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.144396] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.144403] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.144410] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.144417] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.144424] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.144431] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[ 0.144524] pci 0000:00:02.0: reg 10: [mem 0xde000000-0xde07ffff]
[ 0.144534] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.144544] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[ 0.144553] pci 0000:00:02.0: reg 1c: [mem 0xde100000-0xde13ffff]
[ 0.144607] pci 0000:00:02.1: reg 10: [mem 0xde080000-0xde0fffff]
[ 0.144741] pci 0000:00:1b.0: reg 10: [mem 0xde340000-0xde343fff 64bit]
[ 0.144819] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.144827] pci 0000:00:1b.0: PME# disabled
[ 0.144954] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.144962] pci 0000:00:1c.0: PME# disabled
[ 0.145099] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.145108] pci 0000:00:1c.2: PME# disabled
[ 0.145236] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.145245] pci 0000:00:1c.3: PME# disabled
[ 0.145332] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.145417] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.145502] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.145587] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.145668] pci 0000:00:1d.7: reg 10: [mem 0xde344000-0xde3443ff]
[ 0.145747] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.145756] pci 0000:00:1d.7: PME# disabled
[ 0.145952] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.145976] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.145994] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.146006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0360 (mask 0003)
[ 0.146088] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.146101] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.146113] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.146126] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.146139] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.146215] pci 0000:00:1f.2: reg 10: [io 0x18d0-0x18d7]
[ 0.146228] pci 0000:00:1f.2: reg 14: [io 0x18c4-0x18c7]
[ 0.146240] pci 0000:00:1f.2: reg 18: [io 0x18c8-0x18cf]
[ 0.146253] pci 0000:00:1f.2: reg 1c: [io 0x18c0-0x18c3]
[ 0.146266] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.146279] pci 0000:00:1f.2: reg 24: [mem 0xde344400-0xde3447ff]
[ 0.146318] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.146326] pci 0000:00:1f.2: PME# disabled
[ 0.146397] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
[ 0.146506] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.146591] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.146625] pci 0000:03:00.0: reg 18: [mem 0xd4000000-0xd4000fff 64bit pref]
[ 0.146650] pci 0000:03:00.0: reg 20: [mem 0xd2000000-0xd200ffff 64bit pref]
[ 0.146666] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.146729] pci 0000:03:00.0: supports D1 D2
[ 0.146734] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.146744] pci 0000:03:00.0: PME# disabled
[ 0.148083] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
[ 0.148101] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.148111] pci 0000:00:1c.2: bridge window [mem 0xda000000-0xdbffffff]
[ 0.148124] pci 0000:00:1c.2: bridge window [mem 0xd2000000-0xd5ffffff 64bit pref]
[ 0.148196] pci 0000:00:1c.3: PCI bridge to [bus 05-06]
[ 0.148212] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.148222] pci 0000:00:1c.3: bridge window [mem 0xdc000000-0xddffffff]
[ 0.148235] pci 0000:00:1c.3: bridge window [mem 0xd6000000-0xd7ffffff 64bit pref]
[ 0.148310] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.148367] pci_bus 0000:00: on NUMA node 0
[ 0.148378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.148762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.148926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.149091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.149300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.160607] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.160831] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.161078] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.161295] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.161513] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.161734] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.161962] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.162188] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.164193] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.164233] vgaarb: loaded
[ 0.164936] SCSI subsystem initialized
[ 0.165052] libata version 3.00 loaded.
[ 0.165637] PCI: Using ACPI for IRQ routing
[ 0.165655] PCI: pci_cache_line_size set to 64 bytes
[ 0.166115] NetLabel: Initializing
[ 0.166134] NetLabel: domain hash size = 128
[ 0.166147] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.166179] NetLabel: unlabeled traffic allowed by default
[ 0.166198] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.166218] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.166238] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.169142] Switching to clocksource tsc
[ 0.169993] pnp: PnP ACPI init
[ 0.169993] ACPI: bus type pnp registered
[ 0.174576] pnp: PnP ACPI: found 10 devices
[ 0.174593] ACPI: ACPI bus type pnp unregistered
[ 0.174607] PnPBIOS: Disabled by ACPI PNP
[ 0.174639] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.174655] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.174670] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.174686] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.174701] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.174716] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.174732] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.174747] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.174772] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.174806] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.174821] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.174836] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.174850] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.174865] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.174897] system 00:06: [io 0x0360-0x0361] has been reserved
[ 0.209739] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
[ 0.209763] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.209787] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.209801] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.209816] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.209835] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
[ 0.209853] pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.209885] pci 0000:03:00.0: BAR 6: assigned [mem 0xd2020000-0xd203ffff pref]
[ 0.209902] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
[ 0.209917] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.209935] pci 0000:00:1c.2: bridge window [mem 0xda000000-0xdbffffff]
[ 0.209954] pci 0000:00:1c.2: bridge window [mem 0xd2000000-0xd5ffffff 64bit pref]
[ 0.209978] pci 0000:00:1c.3: PCI bridge to [bus 05-06]
[ 0.209992] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.210011] pci 0000:00:1c.3: bridge window [mem 0xdc000000-0xddffffff]
[ 0.210029] pci 0000:00:1c.3: bridge window [mem 0xd6000000-0xd7ffffff 64bit pref]
[ 0.210053] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
[ 0.210065] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.210082] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.210097] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.210141] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.210159] pci 0000:00:1c.0: setting latency timer to 64
[ 0.210180] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.210198] pci 0000:00:1c.2: setting latency timer to 64
[ 0.210217] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.210235] pci 0000:00:1c.3: setting latency timer to 64
[ 0.210248] pci 0000:00:1e.0: setting latency timer to 64
[ 0.210257] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.210264] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.210271] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.210277] pci_bus 0000:02: resource 1 [mem 0x40000000-0x401fffff]
[ 0.210284] pci_bus 0000:02: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.210290] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.210297] pci_bus 0000:03: resource 1 [mem 0xda000000-0xdbffffff]
[ 0.210303] pci_bus 0000:03: resource 2 [mem 0xd2000000-0xd5ffffff 64bit pref]
[ 0.210310] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.210316] pci_bus 0000:05: resource 1 [mem 0xdc000000-0xddffffff]
[ 0.210323] pci_bus 0000:05: resource 2 [mem 0xd6000000-0xd7ffffff 64bit pref]
[ 0.210330] pci_bus 0000:07: resource 3 [io 0x0000-0xffff]
[ 0.210336] pci_bus 0000:07: resource 4 [mem 0x00000000-0xffffffffffffffff]
[ 0.210395] NET: Registered protocol family 2
[ 0.210535] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.211115] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.212121] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.212609] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.212627] TCP reno registered
[ 0.212642] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.212672] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.212917] NET: Registered protocol family 1
[ 0.212969] pci 0000:00:02.0: Boot video device
[ 0.213146] PCI: CLS 64 bytes, default 64
[ 0.213259] Trying to unpack rootfs image as initramfs...
[ 0.551215] Freeing initrd memory: 5932k freed
[ 0.557355] Simple Boot Flag at 0x36 set to 0x1
[ 0.559115] audit: initializing netlink socket (disabled)
[ 0.559154] type=2000 audit(1268819895.558:1): initialized
[ 0.559457] highmem bounce pool size: 64 pages
[ 0.559476] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.565355] VFS: Disk quotas dquot_6.5.2
[ 0.565541] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.565752] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[ 0.568188] NTFS driver 2.1.29 [Flags: R/O].
[ 0.568859] JFS: nTxBlock = 7992, nTxLock = 63937
[ 0.573883] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.575248] SGI XFS Quota Management subsystem
[ 0.575283] msgmni has been set to 1748
[ 0.577852] alg: No test for lzf (lzf-generic)
[ 0.577993] alg: No test for stdrng (krng)
[ 0.578320] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.578343] io scheduler noop registered
[ 0.578631] io scheduler cfq registered (default)
[ 0.579028] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.579103] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.579439] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.579507] pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X
[ 0.579877] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.579945] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 0.588266] vesafb: framebuffer at 0xc0000000, mapped to 0xf8800000, using 3750k, total 7872k
[ 0.588292] vesafb: mode is 800x600x32, linelength=3200, pages=3
[ 0.588304] vesafb: scrolling: redraw
[ 0.588317] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.608758] Console: switching to colour frame buffer device 100x37
[ 0.628552] fb0: VESA VGA frame buffer device
[ 0.628997] isapnp: Scanning for PnP cards...
[ 0.942023] isapnp: No Plug & Play device found
[ 0.946178] brd: module loaded
[ 0.946537] Uniform Multi-Platform E-IDE driver
[ 0.948590] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
[ 0.949066] PIIX_IDE 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.949527] piix 0000:00:1f.1: IDE port disabled
[ 0.949838] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 0.950275] ide0: BM-DMA at 0x1810-0x1817
[ 0.961220] Probing IDE interface ide0...
[ 1.480409] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.492260] ide-gd driver 1.18
[ 1.502931] ide-cd driver 5.00
[ 1.513469] ata_piix 0000:00:1f.2: version 2.13
[ 1.513500] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.524001] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 1.685027] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.685133] scsi0 : ata_piix
[ 1.695310] scsi1 : ata_piix
[ 1.706935] ata1: SATA max UDMA/133 cmd 0x18d0 ctl 0x18c4 bmdma 0x18b0 irq 19
[ 1.717023] ata2: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b8 irq 19
[ 1.733447] Fixed MDIO Bus: probed
[ 1.743237] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.760325] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.770261] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.780349] mice: PS/2 mouse device common for all mice
[ 1.790380] cpuidle: using governor ladder
[ 1.800896] TCP bic registered
[ 1.810360] NET: Registered protocol family 17
[ 1.819985] Using IPI No-Shortcut mode
[ 1.829814] TuxOnIce 3.0.99.49 (http://tuxonice.net)
[ 1.839389] Scanning swap devices for TuxOnIce signature...
[ 1.840033] TuxOnIce scan: No image found.
[ 1.840790] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.926849] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 1.936558] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.953348] ata1.00: configured for UDMA/133
[ 1.963215] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
[ 1.973657] Scanning swap devices for TuxOnIce signature...
[ 1.974290] TuxOnIce scan: No image found.
[ 1.974310] TuxOnIce: Can't translate "" into a device id yet.
[ 1.984310] TuxOnIce: No matching enabled allocator found. Resuming disabled.
[ 1.995196] Freeing unused kernel memory: 392k freed
[ 2.005911] Write protecting the kernel text: 3844k
[ 2.016438] Write protecting the kernel read-only data: 1724k
[ 2.026827] BFS CPU scheduler v0.315 by Con Kolivas.
[ 2.305130] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.325661] ACPI: Thermal Zone [TZ00] (27 C)
[ 2.336609] ACPI: Invalid active0 threshold
[ 2.347375] thermal LNXTHERM:02: registered as thermal_zone1
[ 2.358290] ACPI: Thermal Zone [TZ01] (27 C)
[ 3.247185] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.259090] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.270438] r8169 0000:03:00.0: setting latency timer to 64
[ 3.270531] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[ 3.271254] eth0: RTL8102e at 0xf8724000, 00:12:40:a0:77:1c, XID 04c00000 IRQ 27
[ 4.897914] usbcore: registered new interface driver usbfs
[ 4.942973] usbcore: registered new interface driver hub
[ 4.954846] usbcore: registered new device driver usb
[ 5.000117] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.011586] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.023041] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.023054] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.034597] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 5.064093] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 5.076121] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.088137] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.100970] usb usb1: Product: UHCI Host Controller
[ 5.112831] usb usb1: Manufacturer: Linux 2.6.33-oshirix uhci_hcd
[ 5.124670] usb usb1: SerialNumber: 0000:00:1d.0
[ 5.150315] hub 1-0:1.0: USB hub found
[ 5.161580] hub 1-0:1.0: 2 ports detected
[ 5.173612] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.174238] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.174244] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 5.207953] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.207965] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.219092] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 5.230628] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 5.263012] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.275107] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.286928] usb usb2: Product: UHCI Host Controller
[ 5.298457] usb usb2: Manufacturer: Linux 2.6.33-oshirix uhci_hcd
[ 5.310043] usb usb2: SerialNumber: 0000:00:1d.1
[ 5.321544] hub 2-0:1.0: USB hub found
[ 5.352295] hub 2-0:1.0: 2 ports detected
[ 5.363704] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.375000] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.375023] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.385973] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 5.396756] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 5.425050] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 5.432035] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.435946] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 5.435971] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xde344000
[ 5.474277] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.485427] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.496371] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.503998] sd 0:0:0:0: [sda] Write Protect is off
[ 5.504008] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.504099] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.504505] sda:
[ 5.542158] usb usb3: Product: EHCI Host Controller
[ 5.565182] sda1 sda2 <
[ 5.565624] usb usb3: Manufacturer: Linux 2.6.33-oshirix ehci_hcd
[ 5.581315] sda5 sda6
[ 5.597231] usb usb3: SerialNumber: 0000:00:1d.7
[ 5.621743] hub 3-0:1.0: USB hub found
[ 5.633486] hub 3-0:1.0: 8 ports detected
[ 5.635939] sda7 >
[ 5.640983] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.641025] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.641034] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.641064] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 5.641133] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 5.641238] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.641246] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.641252] usb usb4: Product: UHCI Host Controller
[ 5.641257] usb usb4: Manufacturer: Linux 2.6.33-oshirix uhci_hcd
[ 5.641263] usb usb4: SerialNumber: 0000:00:1d.2
[ 5.641507] hub 4-0:1.0: USB hub found
[ 5.641519] hub 4-0:1.0: 2 ports detected
[ 5.641698] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 5.641714] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.641722] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.641741] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 5.641797] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 5.641890] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.641897] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.641903] usb usb5: Product: UHCI Host Controller
[ 5.641909] usb usb5: Manufacturer: Linux 2.6.33-oshirix uhci_hcd
[ 5.641914] usb usb5: SerialNumber: 0000:00:1d.3
[ 5.642130] hub 5-0:1.0: USB hub found
[ 5.642142] hub 5-0:1.0: 2 ports detected
[ 5.677288] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.964476] udev: renamed network interface eth0 to eth1
[ 6.037294] usb 3-4: new high speed USB device using ehci_hcd and address 3
[ 6.203494] usb 3-4: New USB device found, idVendor=0bda, idProduct=0156
[ 6.242272] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.252389] usb 3-4: Product: USB2.0-CRW
[ 6.262371] usb 3-4: Manufacturer: Generic
[ 6.272145] usb 3-4: SerialNumber: 20060413092100000
[ 6.385289] usb 3-6: new high speed USB device using ehci_hcd and address 4
[ 6.390120] usbcore: registered new interface driver libusual
[ 6.430512] Initializing USB Mass Storage driver...
[ 6.440599] scsi2 : usb-storage 3-4:1.0
[ 6.450919] usbcore: registered new interface driver usb-storage
[ 6.461714] USB Mass Storage support registered.
[ 6.530550] usb 3-6: New USB device found, idVendor=0bda, idProduct=8187
[ 6.540374] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.550024] usb 3-6: Product: RTL8187_Wireless
[ 6.559488] usb 3-6: Manufacturer: Manufacturer_Realtek_RTL8187_
[ 6.569070] usb 3-6: SerialNumber: 0025D3154B75
[ 6.688048] usb 3-7: new high speed USB device using ehci_hcd and address 5
[ 6.777569] kjournald starting. Commit interval 5 seconds
[ 6.777599] EXT3-fs (sda7): mounted filesystem with writeback data mode
[ 6.830237] usb 3-7: New USB device found, idVendor=0ac8, idProduct=3420
[ 6.852667] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.863813] usb 3-7: Product: Sirius USB2.0 Camera
[ 6.875264] usb 3-7: Manufacturer: Vimicro Corp.
[ 7.093277] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 7.262554] usb 2-1: New USB device found, idVendor=058f, idProduct=9254
[ 7.274392] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.286271] usb 2-1: Product: Generic USB Hub
[ 7.297869] usb 2-1: Manufacturer: ALCOR
[ 7.311599] hub 2-1:1.0: USB hub found
[ 7.324538] hub 2-1:1.0: 4 ports detected
[ 7.613473] usb 2-1.1: new low speed USB device using uhci_hcd and address 3
[ 7.742445] usb 2-1.1: New USB device found, idVendor=1b1a, idProduct=0000
[ 7.753784] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7.765183] usb 2-1.1: Product: USB Mouse
[ 7.845425] usb 2-1.3: new low speed USB device using uhci_hcd and address 4
[ 8.061385] usb 2-1.3: New USB device found, idVendor=1241, idProduct=1503
[ 8.072812] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.084419] usb 2-1.3: Product: USB Keyboard
[ 8.096074] usb 2-1.3: Manufacturer:
[ 11.456884] scsi 2:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 11.486371] scsi 2:0:0:1: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 11.501713] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 11.502467] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 12.619407] udevd version 125 started
[ 16.303083] Linux agpgart interface v0.103
[ 16.540295] ACPI: SSDT 3f6e79c6 001E5 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 16.595344] ACPI: SSDT 3f6e7839 00108 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 16.730150] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input1
[ 16.792030] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 16.820028] Marking TSC unstable due to TSC halts in idle
[ 16.873510] ACPI: SSDT 3f6e7bab 00094 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 16.964049] ACPI: SSDT 3f6e7941 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 17.015018] Switching to clocksource hpet
[ 17.599507] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 17.690385] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[ 17.690450] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.828392] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 17.841380] ACPI: Lid Switch [LID0]
[ 17.854369] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 17.867670] ACPI: Power Button [PWRB]
[ 17.950252] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 17.963842] ACPI: Sleep Button [SLPB]
[ 17.977525] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 18.060281] ACPI: Power Button [PWRF]
[ 18.928140] iTCO_vendor_support: vendor-support=0
[ 19.371907] ACPI: WMI: Mapper loaded
[ 19.691958] Linux video capture interface: v2.00
[ 20.103408] usbcore: registered new interface driver hiddev
[ 20.175391] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 20.260259] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 20.274225] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 20.341040] input: USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1/2-1.1:1.0/input/input6
[ 20.367982] generic-usb 0003:1B1A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.1-1.1/input0
[ 20.567855] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input7
[ 20.596664] generic-usb 0003:1241:1503.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.1-1.3/input0
[ 20.919268] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.1/input/input8
[ 20.949523] generic-usb 0003:1241:1503.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.1-1.3/input1
[ 20.980480] usbcore: registered new interface driver usbhid
[ 20.995717] usbhid: USB HID core driver
[ 21.913084] [drm] Initialized drm 1.1.0 20060810
[ 23.197693] uvcvideo: Found UVC 1.00 device Sirius USB2.0 Camera (0ac8:3420)
[ 23.446336] input: Sirius USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb3/3-7/3-7:1.0/input/input9
[ 23.476958] usbcore: registered new interface driver uvcvideo
[ 23.492285] USB Video Class driver (v0.1.0)
[ 24.476450] hda_codec: ALC269: BIOS auto-probing.
[ 24.491923] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 24.637059] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 24.722926] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 24.740325] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 24.820325] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 24.905281] i915 0000:00:02.0: setting latency timer to 64
[ 25.191006] [drm] set up 7M of stolen space
[ 25.243994] cfg80211: Using static regulatory domain info
[ 25.250359] cfg80211: Regulatory domain: 00
[ 25.296025] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 25.302537] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 25.308892] (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 25.314941] (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 25.320376] (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 25.377275] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 25.487272] cfg80211: Calling CRDA to update world regulatory domain
[ 25.533419] [drm] initialized overlay support
[ 25.689277] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 25.742480] leds_ss4200: no LED devices found
[ 26.412865] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 26.418505] Console: switching to colour dummy device 80x25
[ 26.419072] Console: switching to colour frame buffer device 128x37
[ 26.656523] ACPI: AC Adapter [AC0] (on-line)
[ 26.853793] fb0: inteldrmfb frame buffer device
[ 26.853939] registered panic notifier
[ 26.853957] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 26.898666] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 26.898901] ACPI: I/O resource 0000:00:1f.3 [0x18e0-0x18ff] conflicts with ACPI region SMBI [0x18e0-0x18ef]
[ 26.899192] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 27.637304] intel_rng: FWH not detected
[ 28.501346] rtc_cmos 00:07: RTC can wake from S4
[ 28.501647] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 28.501886] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 29.260193] ACPI: Battery Slot [BAT0] (battery present)
[ 32.944278] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x25c0b1, caps: 0xa04711/0xa00000
[ 33.094254] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 34.554949] phy0: Selected rate control algorithm 'minstrel'
[ 34.555714] phy0: hwaddr 00:25:d3:15:4b:75, RTL8187vB (default) V1 + rtl8225, rfkill mask 2
[ 34.580953] rtl8187: Customer ID is 0x00
[ 34.585114] Registered led device: rtl8187-phy0::radio
[ 34.589882] Registered led device: rtl8187-phy0::tx
[ 34.594598] Registered led device: rtl8187-phy0::rx
[ 34.599808] rtl8187: wireless switch is off
[ 34.603746] usbcore: registered new interface driver rtl8187
[ 34.617024] udev: renamed network interface wlan0 to wlan1
[ 34.943766] Adding 128480k swap on /dev/sda6. Priority:-1 extents:1 across:128480k
[ 35.428277] EXT3-fs (sda7): using internal journal
[ 37.495032] device-mapper: uevent: version 1.0.3
[ 37.501343] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
[ 37.932314] fuse init (API version 7.13)
[ 39.940855] NET: Registered protocol family 10
[ 39.952763] lo: Disabled Privacy Extensions
[ 42.701140] lp: driver loaded but no devices found
[ 42.921583] ppdev: user-space parallel port driver
[ 47.611635] [drm:i915_initialize] *ERROR* Client tried to initialize ringbuffer in GEM mode
[ 49.364168] r8169: eth1: link up
[ 49.364181] r8169: eth1: link up
[ 60.059298] eth1: no IPv6 routers present
[ 75.737305] CE: hpet increasing min_delta_ns to 15000 nsec