neurosuser

smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce AllenHome page is http://smartmontools.sourceforge.net/=== START OF INFORMATION SECTION ===Model Family:     Toshiba 2.5" HDD series (80 GB and above)Device Model:     TOSHIBA MK8032GAXSerial Number:    96FC9978TFirmware Version: AD001AUser Capacity:    80,026,361,856 bytesDevice is:        In smartctl database [for details use: -P show]ATA Version is:   6ATA Standard is:  Exact ATA specification draft version not indicatedLocal Time is:    Sun Mar 14 15:58:58 2010 CDTSMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:Offline data collection status:  (0x00)	Offline data collection activity					was never started.					Auto Offline Data Collection: Disabled.Self-test execution status:      (   0)	The previous self-test routine completed					without error or no self-test has ever 					been run.Total time to complete Offline data collection: 		 ( 331) seconds.Offline data collectioncapabilities: 			 (0x5b) SMART execute Offline immediate.					Auto Offline data collection on/off support.					Suspend Offline collection upon new					command.					Offline surface scan supported.					Self-test supported.					No Conveyance Self-test supported.					Selective Self-test supported.SMART capabilities:            (0x0003)	Saves SMART data before entering					power-saving mode.					Supports SMART auto save timer.Error logging capability:        (0x01)	Error logging supported.					General Purpose Logging supported.Short self-test routine recommended polling time: 	 (   2) minutes.Extended self-test routinerecommended polling time: 	 (  65) minutes.SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       1587  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       18  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       15 10 Spin_Retry_Count        0x0033   100   100   030    Pre-fail  Always       -       0 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       18192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       3193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       55194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       41 (Lifetime Min/Max 18/41)196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       80222 Loaded_Hours            0x0032   100   100   000    Old_age   Always       -       15223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       292240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0SMART Error Log Version: 1No Errors LoggedSMART Self-test log structure revision number 1No self-tests have been logged.  [To run self-tests, use: smartctl -t]SMART Selective self-test log data structure revision number 1 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS    1        0        0  Not_testing    2        0        0  Not_testing    3        0        0  Not_testing    4        0        0  Not_testing    5        0        0  Not_testingSelective self-test flags (0x0):  After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.