rendered paste body[ 0.000000] Linux version 2.6.33-00001-gf27154d (alex@varda) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #115 SMP PREEMPT Sat Mar 6 13:02:15 CET 2010[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.33-00001-gf27154d root=UUID=22b22080-8f07-4864-9b26-a62f2e8c96f7 ro quiet splash[ 0.000000] BIOS-provided physical RAM map:[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)[ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffc0000 (ACPI data)[ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bfff0000 (ACPI NVS)[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)[ 0.000000] NX (Execute Disable) protection: active[ 0.000000] DMI present.[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)[ 0.000000] No AGP bridge found[ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x400000000[ 0.000000] MTRR default type: uncachable[ 0.000000] MTRR fixed ranges enabled:[ 0.000000] 00000-9FFFF write-back[ 0.000000] A0000-EFFFF uncachable[ 0.000000] F0000-FFFFF write-protect[ 0.000000] MTRR variable ranges enabled:[ 0.000000] 0 base 0000000000 mask FF80000000 write-back[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back[ 0.000000] 2 disabled[ 0.000000] 3 disabled[ 0.000000] 4 disabled[ 0.000000] 5 disabled[ 0.000000] 6 disabled[ 0.000000] 7 disabled[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106[ 0.000000] initial memory mapped : 0 - 20000000[ 0.000000] init_memory_mapping: 0000000000000000-00000000bffb0000[ 0.000000] 0000000000 - 00bfe00000 page 2M[ 0.000000] 00bfe00000 - 00bffb0000 page 4k[ 0.000000] kernel direct mapping tables up to bffb0000 @ 16000-1b000[ 0.000000] RAMDISK: 37c58000 - 37fef0e4[ 0.000000] ACPI: RSDP 00000000000f90f0 00014 (v00 ACPIAM)[ 0.000000] ACPI: RSDT 00000000bffb0000 00040 (v01 A M I OEMRSDT 03000715 MSFT 00000097)[ 0.000000] ACPI: FACP 00000000bffb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)[ 0.000000] ACPI: DSDT 00000000bffb0440 04B5A (v01 AM2ES AM2ES136 00000136 INTL 02002026)[ 0.000000] ACPI: FACS 00000000bffc0000 00040[ 0.000000] ACPI: APIC 00000000bffb0390 00068 (v01 A M I OEMAPIC 03000715 MSFT 00000097)[ 0.000000] ACPI: MCFG 00000000bffb0400 0003C (v01 A M I OEMMCFG 03000715 MSFT 00000097)[ 0.000000] ACPI: SSDT 00000000bffb4fa0 0002B (v01 OEM_ID OEMTBLID 00000001 INTL 02002026)[ 0.000000] ACPI: OEMB 00000000bffc0040 00056 (v01 A M I AMI_OEM 03000715 MSFT 00000097)[ 0.000000] ACPI: HPET 00000000bffb4fd0 00038 (v01 A M I OEMHPET 03000715 MSFT 00000097)[ 0.000000] ACPI: SSDT 00000000bffb5010 001C4 (v01 A M I POWERNOW 00000001 AMD 00000001)[ 0.000000] ACPI: Local APIC address 0xfee00000[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00bffb0000][ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000][ 0.000000] #1 [0001000000 - 000173a9c4] TEXT DATA BSS ==> [0001000000 - 000173a9c4][ 0.000000] #2 [0037c58000 - 0037fef0e4] RAMDISK ==> [0037c58000 - 0037fef0e4][ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000][ 0.000000] #4 [000173b000 - 000173b123] BRK ==> [000173b000 - 000173b123][ 0.000000] #5 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000][ 0.000000] #6 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000][ 0.000000] #7 [0000016000 - 0000019000] PGTABLE ==> [0000016000 - 0000019000][ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001c00000-ffff8800045fffff] on node 0[ 0.000000] Zone PFN ranges:[ 0.000000] DMA 0x00000010 -> 0x00001000[ 0.000000] DMA32 0x00001000 -> 0x00100000[ 0.000000] Normal 0x00100000 -> 0x00100000[ 0.000000] Movable zone start PFN for each node[ 0.000000] early_node_map[2] active PFN ranges[ 0.000000] 0: 0x00000010 -> 0x0000009f[ 0.000000] 0: 0x00000100 -> 0x000bffb0[ 0.000000] On node 0 totalpages: 786239[ 0.000000] DMA zone: 56 pages used for memmap[ 0.000000] DMA zone: 106 pages reserved[ 0.000000] DMA zone: 3821 pages, LIFO batch:0[ 0.000000] DMA32 zone: 10695 pages used for memmap[ 0.000000] DMA32 zone: 771561 pages, LIFO batch:31[ 0.000000] Detected use of extended apic ids on hypertransport bus[ 0.000000] ACPI: PM-Timer IO Port: 0x4008[ 0.000000] ACPI: Local APIC address 0xfee00000[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])[ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfec10000, GSI 24-44[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)[ 0.000000] ACPI: IRQ0 used by override.[ 0.000000] ACPI: IRQ2 used by override.[ 0.000000] ACPI: IRQ9 used by override.[ 0.000000] Using ACPI (MADT) for SMP configuration information[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs[ 0.000000] nr_irqs_gsi: 45[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3f380000)[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001800000 s77976 r8192 d24424 u1048576[ 0.000000] pcpu-alloc: s77976 r8192 d24424 u1048576 alloc=1*2097152[ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775382[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.33-00001-gf27154d root=UUID=22b22080-8f07-4864-9b26-a62f2e8c96f7 ro quiet splash[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)[ 0.000000] Checking aperture...[ 0.000000] No AGP bridge found[ 0.000000] Node 0: aperture @ b56a000000 size 32 MB[ 0.000000] Aperture beyond 4GB. Ignoring.[ 0.000000] Memory: 3083660k/3145408k available (3621k kernel code, 452k absent, 60660k reserved, 2912k data, 428k init)[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1[ 0.000000] Experimental preemptable hierarchical RCU implementation.[ 0.000000] NR_IRQS:320[ 0.000000] spurious 8259A interrupt: IRQ7.[ 0.000000] Console: colour VGA+ 80x25[ 0.000000] console [tty0] enabled[ 0.000000] hpet clockevent registered[ 0.000000] Fast TSC calibration using PIT[ 0.000000] Detected 1999.766 MHz processor.[ 0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.53 BogoMIPS (lpj=1999766)[ 0.001039] Mount-cache hash table entries: 256[ 0.001183] tseg: 0000000000[ 0.001195] CPU: Physical Processor ID: 0[ 0.001197] CPU: Processor Core ID: 0[ 0.001200] mce: CPU supports 5 MCE banks[ 0.001210] using C1E aware idle routine[ 0.001212] Performance Events: AMD PMU driver.[ 0.001217] ... version: 0[ 0.001219] ... bit width: 48[ 0.001220] ... generic registers: 4[ 0.001222] ... value mask: 0000ffffffffffff[ 0.001224] ... max period: 00007fffffffffff[ 0.001226] ... fixed-purpose events: 0[ 0.001228] ... event mask: 000000000000000f[ 0.001242] ACPI: Core revision 20091214[ 0.007834] Setting APIC routing to flat[ 0.008531] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1[ 0.018541] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02[ 0.024022] Booting Node 0, Processors #1 Ok.[ 0.095083] Brought up 2 CPUs[ 0.095085] Total of 2 processors activated (7999.28 BogoMIPS).[ 0.095347] NET: Registered protocol family 16[ 0.096038] node 0 link 0: io port [1000, ffffff][ 0.096038] TOM: 00000000c0000000 aka 3072M[ 0.096038] node 0 link 0: mmio [e0000000, efffffff][ 0.096038] node 0 link 0: mmio [a0000, bffff][ 0.096038] node 0 link 0: mmio [c0000000, ffffffff][ 0.096038] bus: [00, ff] on node 0 link 0[ 0.096040] bus: 00 index 0 io port: [0, ffff][ 0.096043] bus: 00 index 1 mmio: [c0000000, fcffffffff][ 0.096045] bus: 00 index 2 mmio: [a0000, bffff][ 0.096052] ACPI: bus type pci registered[ 0.096066] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)[ 0.096066] PCI: not using MMCONFIG[ 0.096066] PCI: Using configuration type 1 for base access[ 0.100127] bio: create slab <bio-0> at 0[ 0.101308] ACPI: EC: Look up EC in DSDT[ 0.104375] ACPI: Executed 1 blocks of module-level executable AML code[ 0.110159] ACPI: Interpreter enabled[ 0.110164] ACPI: (supports S0 S1 S3 S5)[ 0.110184] ACPI: Using IOAPIC for interrupt routing[ 0.110244] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)[ 0.114427] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources[ 0.131131] ACPI Warning: Incorrect checksum in table [OEMB] - 52, should be 2D (20091214/tbutils-314)[ 0.131238] ACPI: No dock devices found.[ 0.132193] ACPI: PCI Root Bridge [PCI0] (0000:00)[ 0.132239] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them[ 0.132239] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)[ 0.132239] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)[ 0.132239] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)[ 0.132239] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)[ 0.132239] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)[ 0.132309] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold[ 0.132313] pci 0000:00:01.0: PME# disabled[ 0.132353] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold[ 0.132356] pci 0000:00:02.0: PME# disabled[ 0.132395] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold[ 0.132399] pci 0000:00:03.0: PME# disabled[ 0.132438] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold[ 0.132441] pci 0000:00:04.0: PME# disabled[ 0.132498] pci 0000:00:12.0: reg 10: [io 0xc800-0xc8ff][ 0.132504] pci 0000:00:12.0: reg 14: [mem 0xdbfefc00-0xdbfefcff][ 0.132531] pci 0000:00:12.0: PME# supported from D3hot D3cold[ 0.132534] pci 0000:00:12.0: PME# disabled[ 0.132551] pci 0000:00:13.0: reg 10: [mem 0xdbfee000-0xdbfeefff][ 0.132586] pci 0000:00:13.1: reg 10: [mem 0xdbfed000-0xdbfedfff][ 0.132621] pci 0000:00:13.2: reg 10: [mem 0xdbfec000-0xdbfecfff][ 0.132664] pci 0000:00:13.3: reg 10: [mem 0xdbfef800-0xdbfef8ff][ 0.132696] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold[ 0.132700] pci 0000:00:13.3: PME# disabled[ 0.132730] pci 0000:00:14.0: reg 10: [mem 0xdbfd4000-0xdbfd7fff 64bit][ 0.133010] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold[ 0.133014] pci 0000:00:14.0: PME# disabled[ 0.133106] pci 0000:00:15.1: quirk: [io 0x4000-0x403f] claimed by ali7101 ACPI[ 0.133149] pci 0000:00:16.0: reg 20: [io 0xff00-0xff0f][ 0.133187] pci 0000:00:16.1: reg 10: [io 0xc400-0xc407][ 0.133192] pci 0000:00:16.1: reg 14: [io 0xc000-0xc003][ 0.133198] pci 0000:00:16.1: reg 18: [io 0xb800-0xb807][ 0.133203] pci 0000:00:16.1: reg 1c: [io 0xb400-0xb403][ 0.133209] pci 0000:00:16.1: reg 20: [io 0xb000-0xb00f][ 0.133215] pci 0000:00:16.1: reg 24: [mem 0xdbfef400-0xdbfef7ff][ 0.133231] pci 0000:00:16.1: PME# supported from D3hot[ 0.133234] pci 0000:00:16.1: PME# disabled[ 0.133338] pci 0000:01:00.0: reg 10: [mem 0xdd000000-0xddffffff][ 0.133348] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref][ 0.133356] pci 0000:01:00.0: reg 1c: [mem 0xdc000000-0xdcffffff 64bit][ 0.133362] pci 0000:01:00.0: reg 24: [io 0xd800-0xd87f][ 0.133368] pci 0000:01:00.0: reg 30: [mem 0xdeee0000-0xdeefffff pref][ 0.133412] pci 0000:00:01.0: PCI bridge to [bus 01-01][ 0.133416] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff][ 0.133420] pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdeefffff][ 0.133424] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref][ 0.133447] pci 0000:00:02.0: PCI bridge to [bus 02-02][ 0.133453] pci 0000:00:02.0: bridge window [mem 0xdad00000-0xdadfffff pref][ 0.133476] pci 0000:00:03.0: PCI bridge to [bus 03-03][ 0.133481] pci 0000:00:03.0: bridge window [mem 0xdae00000-0xdaefffff pref][ 0.133504] pci 0000:00:04.0: PCI bridge to [bus 04-04][ 0.133510] pci 0000:00:04.0: bridge window [mem 0xdaf00000-0xdaffffff pref][ 0.133549] pci 0000:05:0a.0: reg 10: [mem 0xdeffe000-0xdeffffff][ 0.133618] pci 0000:05:0b.0: reg 10: [io 0xe800-0xe8ff][ 0.133625] pci 0000:05:0b.0: reg 14: [mem 0xdeffdc00-0xdeffdcff][ 0.133648] pci 0000:05:0b.0: reg 30: [mem 0xdefc0000-0xdefdffff pref][ 0.133666] pci 0000:05:0b.0: supports D1 D2[ 0.133668] pci 0000:05:0b.0: PME# supported from D1 D2 D3hot D3cold[ 0.133673] pci 0000:05:0b.0: PME# disabled[ 0.133699] pci 0000:05:0c.0: reg 10: [mem 0xdeffc000-0xdeffcfff][ 0.133739] pci 0000:05:0c.0: PME# supported from D0 D1 D3hot D3cold[ 0.133744] pci 0000:05:0c.0: PME# disabled[ 0.133770] pci 0000:05:0c.1: reg 10: [mem 0xdeff3000-0xdeff3fff][ 0.133810] pci 0000:05:0c.1: PME# supported from D0 D1 D3hot D3cold[ 0.133814] pci 0000:05:0c.1: PME# disabled[ 0.133840] pci 0000:05:0c.2: reg 10: [mem 0xdeff2000-0xdeff2fff][ 0.133880] pci 0000:05:0c.2: PME# supported from D0 D1 D3hot D3cold[ 0.133884] pci 0000:05:0c.2: PME# disabled[ 0.133914] pci 0000:05:0c.3: reg 10: [mem 0xdeffd800-0xdeffd8ff][ 0.133958] pci 0000:05:0c.3: PME# supported from D0 D3hot D3cold[ 0.133962] pci 0000:05:0c.3: PME# disabled[ 0.133997] pci 0000:00:11.0: PCI bridge to [bus 05-05][ 0.134003] pci 0000:00:11.0: bridge window [io 0xe000-0xefff][ 0.134007] pci 0000:00:11.0: bridge window [mem 0xdef00000-0xdeffffff][ 0.134022] pci_bus 0000:00: on NUMA node 0[ 0.134026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT][ 0.134114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT][ 0.134245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT][ 0.134304] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT][ 0.134362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB3._PRT][ 0.134419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB4._PRT][ 0.146164] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)[ 0.147158] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)[ 0.147334] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)[ 0.147505] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)[ 0.147677] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)[ 0.147849] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 *10 11 12 14 15)[ 0.148021] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)[ 0.148192] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)[ 0.148363] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 *10 11 12 14 15)[ 0.148420] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none[ 0.148420] vgaarb: loaded[ 0.148420] SCSI subsystem initialized[ 0.150043] libata version 3.00 loaded.[ 0.150043] PCI: Using ACPI for IRQ routing[ 0.150043] PCI: pci_cache_line_size set to 64 bytes[ 0.150130] cfg80211: Calling CRDA to update world regulatory domain[ 0.150130] HPET: 3 timers in total, 0 timers will be used for per-cpu timer[ 0.150130] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0[ 0.150130] hpet0: 3 comparators, 64-bit 14.318180 MHz counter[ 0.153007] Switching to clocksource hpet[ 0.155066] pnp: PnP ACPI init[ 0.155074] ACPI: bus type pnp registered[ 0.160069] pnp: PnP ACPI: found 15 devices[ 0.160072] ACPI: ACPI bus type pnp unregistered[ 0.160088] system 00:07: [io 0x04d0-0x04d1] has been reserved[ 0.160092] system 00:07: [io 0x4000-0x40bf] could not be reserved[ 0.160095] system 00:07: [io 0x40c0-0x40df] has been reserved[ 0.160098] system 00:07: [io 0x0400-0x040f] has been reserved[ 0.160102] system 00:07: [io 0x0480-0x048f] has been reserved[ 0.160106] system 00:07: [mem 0xfff80000-0xffffffff] has been reserved[ 0.160109] system 00:07: [mem 0xfec10000-0xfec10fff] could not be reserved[ 0.160113] system 00:07: [mem 0xfe000000-0xfe0000ff] has been reserved[ 0.160120] system 00:09: [mem 0xff380000-0xffffffff] could not be reserved[ 0.160123] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved[ 0.160127] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved[ 0.160133] system 00:0c: [io 0x0290-0x029f] has been reserved[ 0.160139] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved[ 0.160145] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved[ 0.160149] system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved[ 0.160153] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved[ 0.160156] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved[ 0.165235] pci 0000:00:01.0: PCI bridge to [bus 01-01][ 0.165239] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff][ 0.165244] pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdeefffff][ 0.165248] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref][ 0.165259] pci 0000:00:02.0: PCI bridge to [bus 02-02][ 0.165261] pci 0000:00:02.0: bridge window [io disabled][ 0.165265] pci 0000:00:02.0: bridge window [mem disabled][ 0.165268] pci 0000:00:02.0: bridge window [mem 0xdad00000-0xdadfffff pref][ 0.165273] pci 0000:00:03.0: PCI bridge to [bus 03-03][ 0.165275] pci 0000:00:03.0: bridge window [io disabled][ 0.165278] pci 0000:00:03.0: bridge window [mem disabled][ 0.165282] pci 0000:00:03.0: bridge window [mem 0xdae00000-0xdaefffff pref][ 0.165286] pci 0000:00:04.0: PCI bridge to [bus 04-04][ 0.165289] pci 0000:00:04.0: bridge window [io disabled][ 0.165292] pci 0000:00:04.0: bridge window [mem disabled][ 0.165296] pci 0000:00:04.0: bridge window [mem 0xdaf00000-0xdaffffff pref][ 0.165301] pci 0000:00:11.0: PCI bridge to [bus 05-05][ 0.165304] pci 0000:00:11.0: bridge window [io 0xe000-0xefff][ 0.165309] pci 0000:00:11.0: bridge window [mem 0xdef00000-0xdeffffff][ 0.165312] pci 0000:00:11.0: bridge window [mem pref disabled][ 0.165327] pci 0000:00:01.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29[ 0.165332] pci 0000:00:01.0: setting latency timer to 64[ 0.165339] pci 0000:00:02.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34[ 0.165343] pci 0000:00:02.0: setting latency timer to 64[ 0.165350] pci 0000:00:03.0: PCI INT A -> GSI 39 (level, low) -> IRQ 39[ 0.165353] pci 0000:00:03.0: setting latency timer to 64[ 0.165360] pci 0000:00:04.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44[ 0.165364] pci 0000:00:04.0: setting latency timer to 64[ 0.165369] pci 0000:00:11.0: setting latency timer to 64[ 0.165374] pci_bus 0000:00: resource 0 [io 0x0000-0xffff][ 0.165377] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff][ 0.165380] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff][ 0.165383] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdeefffff][ 0.165386] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref][ 0.165390] pci_bus 0000:02: resource 2 [mem 0xdad00000-0xdadfffff pref][ 0.165393] pci_bus 0000:03: resource 2 [mem 0xdae00000-0xdaefffff pref][ 0.165397] pci_bus 0000:04: resource 2 [mem 0xdaf00000-0xdaffffff pref][ 0.165400] pci_bus 0000:05: resource 0 [io 0xe000-0xefff][ 0.165403] pci_bus 0000:05: resource 1 [mem 0xdef00000-0xdeffffff][ 0.165433] NET: Registered protocol family 2[ 0.165506] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)[ 0.166555] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)[ 0.169155] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)[ 0.169801] TCP: Hash tables configured (established 262144 bind 65536)[ 0.169804] TCP reno registered[ 0.169809] UDP hash table entries: 2048 (order: 4, 65536 bytes)[ 0.169858] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)[ 0.169992] NET: Registered protocol family 1[ 0.170019] pci 0000:00:00.0: Enabling HT MSI Mapping[ 0.170043] pci 0000:00:01.0: Enabling HT MSI Mapping[ 0.170063] pci 0000:00:02.0: Enabling HT MSI Mapping[ 0.170082] pci 0000:00:03.0: Enabling HT MSI Mapping[ 0.170102] pci 0000:00:04.0: Enabling HT MSI Mapping[ 0.203299] PCI: CLS mismatch (64 != 32), using 64 bytes[ 0.203316] pci 0000:01:00.0: Boot video device[ 0.203419] Trying to unpack rootfs image as initramfs...[ 0.308759] Freeing initrd memory: 3676k freed[ 0.311426] kvm: Nested Virtualization enabled[ 0.312946] microcode: microcode: CPU0: AMD CPU family 0xf not supported[ 0.312953] microcode: microcode: CPU1: AMD CPU family 0xf not supported[ 0.313011] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba[ 0.319364] VFS: Disk quotas dquot_6.5.2[ 0.319471] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[ 0.319990] EXT4-fs: Unable to register as ext3 (-16)[ 0.320428] JFS: nTxBlock = 8192, nTxLock = 65536[ 0.324370] Btrfs loaded[ 0.324377] msgmni has been set to 6031[ 0.326485] alg: No test for stdrng (krng)[ 0.326621] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)[ 0.326624] io scheduler noop registered[ 0.326768] io scheduler cfq registered (default)[ 0.326916] pcieport 0000:00:01.0: setting latency timer to 64[ 0.326941] pcieport 0000:00:01.0: irq 45 for MSI/MSI-X[ 0.327123] pcieport 0000:00:02.0: setting latency timer to 64[ 0.327143] pcieport 0000:00:02.0: irq 46 for MSI/MSI-X[ 0.327322] pcieport 0000:00:03.0: setting latency timer to 64[ 0.327342] pcieport 0000:00:03.0: irq 47 for MSI/MSI-X[ 0.327511] pcieport 0000:00:04.0: setting latency timer to 64[ 0.327531] pcieport 0000:00:04.0: irq 48 for MSI/MSI-X[ 0.327985] aer 0000:00:01.0:pcie02: service driver aer loaded[ 0.328010] aer 0000:00:02.0:pcie02: service driver aer loaded[ 0.328033] aer 0000:00:03.0:pcie02: service driver aer loaded[ 0.328056] aer 0000:00:04.0:pcie02: service driver aer loaded[ 0.328370] vga16fb: initializing[ 0.328373] vga16fb: mapped to 0xffff8800000a0000[ 0.328441] fb0: VGA16 VGA frame buffer device[ 0.328674] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0[ 0.328678] ACPI: Power Button [PWRB][ 0.328784] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1[ 0.328787] ACPI: Power Button [PWRF][ 0.329115] ACPI: duty_cycle spans bit 4[ 0.336792] Linux agpgart interface v0.103[ 0.339224] brd: module loaded[ 0.339384] ahci 0000:00:16.1: version 3.0[ 0.339403] ahci 0000:00:16.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21[ 0.339511] ahci 0000:00:16.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode[ 0.339516] ahci 0000:00:16.1: flags: ncq sntf ilck pm led clo pmp pio slum part [ 0.339975] scsi0 : ahci[ 0.340196] scsi1 : ahci[ 0.340354] scsi2 : ahci[ 0.340501] scsi3 : ahci[ 0.340702] ata1: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef500 irq 21[ 0.340706] ata2: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef580 irq 21[ 0.340709] ata3: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef600 irq 21[ 0.340713] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 21[ 0.340834] pata_ali 0000:00:16.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21[ 0.340972] scsi4 : pata_ali[ 0.341216] scsi5 : pata_ali[ 0.343118] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14[ 0.343121] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15[ 0.343334] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1[ 0.343337] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp[ 0.343876] serio: i8042 KBD port at 0x60,0x64 irq 1[ 0.344118] mice: PS/2 mouse device common for all mice[ 0.344280] rtc_cmos 00:02: RTC can wake from S4[ 0.344361] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0[ 0.344393] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs[ 0.344443] i2c /dev entries driver[ 0.344565] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141[ 0.344695] w83627ehf: Found W83627EHG chip at 0x290[ 0.347265] cpuidle: using governor ladder[ 0.347267] cpuidle: using governor menu[ 0.347705] TCP cubic registered[ 0.347982] NET: Registered protocol family 10[ 0.348511] lo: Disabled Privacy Extensions[ 0.348794] NET: Registered protocol family 17[ 0.348814] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)[ 0.348861] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa[ 0.348864] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc[ 0.348866] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12[ 0.349192] registered taskstats version 1[ 0.349496] rtc_cmos 00:02: setting system clock to 2010-03-13 11:30:08 UTC (1268479808)[ 0.371332] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2[ 0.497456] ata5.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133[ 0.497460] ata5.01: 160086528 sectors, multi 16: LBA [ 0.503363] ata5.01: configured for UDMA/133[ 0.646025] ata3: SATA link down (SStatus 0 SControl 300)[ 0.646042] ata2: SATA link down (SStatus 0 SControl 300)[ 0.798046] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[ 0.839494] ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133[ 0.839497] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)[ 0.897820] ata1.00: configured for UDMA/133[ 0.908136] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5[ 0.908526] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)[ 0.908584] sd 0:0:0:0: [sda] Write Protect is off[ 0.908588] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[ 0.908610] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[ 0.908740] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >[ 0.968405] sd 0:0:0:0: [sda] Attached SCSI disk[ 1.217046] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)[ 1.243972] ata4.00: ATA-8: ST3500418AS, CC34, max UDMA/133[ 1.243975] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)[ 1.283432] ata4.00: configured for UDMA/133[ 1.294087] scsi 3:0:0:0: Direct-Access ATA ST3500418AS CC34 PQ: 0 ANSI: 5[ 1.294367] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)[ 1.294423] sd 3:0:0:0: [sdb] Write Protect is off[ 1.294426] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00[ 1.294449] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[ 1.294643] sdb:[ 1.294764] scsi 4:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5[ 1.295062] sd 4:0:1:0: [sdc] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)[ 1.295129] sd 4:0:1:0: [sdc] Write Protect is off[ 1.295132] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00[ 1.295155] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[ 1.295280] sdc: sdb1 sdb4 < sdc1 sdc2 sdc3[ 1.300501] sd 4:0:1:0: [sdc] Attached SCSI disk[ 1.308523] sdb5 >[ 1.308949] sd 3:0:0:0: [sdb] Attached SCSI disk[ 1.449310] ata6.00: ATAPI: _NEC DVD_RW ND-3540A, 1.01, max UDMA/33[ 1.449331] ata6.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled[ 1.449334] ata6.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.[ 1.455236] ata6.00: configured for UDMA/33[ 1.456569] scsi 5:0:0:0: CD-ROM _NEC DVD_RW ND-3540A 1.01 PQ: 0 ANSI: 5[ 1.456850] Freeing unused kernel memory: 428k freed[ 1.457058] Write protecting the kernel read-only data: 6144k[ 1.457202] Freeing unused kernel memory: 456k freed[ 1.457536] Freeing unused kernel memory: 340k freed[ 1.636488] sd 0:0:0:0: Attached scsi generic sg0 type 0[ 1.636521] sd 3:0:0:0: Attached scsi generic sg1 type 0[ 1.636554] sd 4:0:1:0: Attached scsi generic sg2 type 0[ 1.636589] scsi 5:0:0:0: Attached scsi generic sg3 type 5[ 1.671993] usbcore: registered new interface driver usbfs[ 1.672214] usbcore: registered new interface driver hub[ 1.672338] usbcore: registered new device driver usb[ 1.674123] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[ 1.674159] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17[ 1.674182] ohci_hcd 0000:00:13.0: OHCI Host Controller[ 1.674221] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1[ 1.674280] ohci_hcd 0000:00:13.0: irq 17, io mem 0xdbfee000[ 1.677173] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 1.677176] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after[ 1.687015] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded[ 1.687043] r8169 0000:05:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19[ 1.687074] r8169 0000:05:0b.0: no PCI Express capability[ 1.687836] eth0: RTL8110s at 0xffffc9001087ac00, 00:4f:63:00:a4:73, XID 04000000 IRQ 19[ 1.692951] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray[ 1.692955] Uniform CD-ROM driver Revision: 3.20[ 1.693220] sr 5:0:0:0: Attached scsi CD-ROM sr0[ 1.727511] hub 1-0:1.0: USB hub found[ 1.727519] hub 1-0:1.0: 3 ports detected[ 1.727642] ehci_hcd 0000:00:13.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23[ 1.727667] ehci_hcd 0000:00:13.3: EHCI Host Controller[ 1.727677] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 2[ 1.727707] ehci_hcd 0000:00:13.3: debug port 1[ 1.748318] ehci_hcd 0000:00:13.3: irq 23, io mem 0xdbfef800[ 1.754264] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00[ 1.754400] hub 2-0:1.0: USB hub found[ 1.754405] hub 2-0:1.0: 8 ports detected[ 1.754520] ehci_hcd 0000:05:0c.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20[ 1.754545] ehci_hcd 0000:05:0c.3: EHCI Host Controller[ 1.754562] ehci_hcd 0000:05:0c.3: new USB bus registered, assigned bus number 3[ 1.754595] ehci_hcd 0000:05:0c.3: debug port 1[ 1.754734] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18[ 1.754748] ohci_hcd 0000:00:13.1: OHCI Host Controller[ 1.754756] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4[ 1.754793] ohci_hcd 0000:00:13.1: irq 18, io mem 0xdbfed000[ 1.775303] ehci_hcd 0000:05:0c.3: irq 20, io mem 0xdeffd800[ 1.781265] ehci_hcd 0000:05:0c.3: USB 2.0 started, EHCI 1.00[ 1.781401] hub 3-0:1.0: USB hub found[ 1.781406] hub 3-0:1.0: 6 ports detected[ 1.807414] hub 4-0:1.0: USB hub found[ 1.807422] hub 4-0:1.0: 3 ports detected[ 1.807516] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19[ 1.807542] ohci_hcd 0000:00:13.2: OHCI Host Controller[ 1.807552] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 5[ 1.807594] ohci_hcd 0000:00:13.2: irq 19, io mem 0xdbfec000[ 1.860419] hub 5-0:1.0: USB hub found[ 1.860426] hub 5-0:1.0: 3 ports detected[ 1.860601] ohci_hcd 0000:05:0c.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21[ 1.860627] ohci_hcd 0000:05:0c.0: OHCI Host Controller[ 1.860638] ohci_hcd 0000:05:0c.0: new USB bus registered, assigned bus number 6[ 1.860664] ohci_hcd 0000:05:0c.0: irq 21, io mem 0xdeffc000[ 1.879137] Console: switching to colour frame buffer device 80x30[ 1.913520] hub 6-0:1.0: USB hub found[ 1.913530] hub 6-0:1.0: 2 ports detected[ 1.913651] ohci_hcd 0000:05:0c.1: PCI INT C -> GSI 22 (level, low) -> IRQ 22[ 1.913679] ohci_hcd 0000:05:0c.1: OHCI Host Controller[ 1.913689] ohci_hcd 0000:05:0c.1: new USB bus registered, assigned bus number 7[ 1.913734] ohci_hcd 0000:05:0c.1: irq 22, io mem 0xdeff3000[ 1.966485] hub 7-0:1.0: USB hub found[ 1.966494] hub 7-0:1.0: 2 ports detected[ 1.966609] ohci_hcd 0000:05:0c.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23[ 1.966636] ohci_hcd 0000:05:0c.2: OHCI Host Controller[ 1.966646] ohci_hcd 0000:05:0c.2: new USB bus registered, assigned bus number 8[ 1.966671] ohci_hcd 0000:05:0c.2: irq 23, io mem 0xdeff2000[ 1.991036] fuse init (API version 7.13)[ 2.009158] md: raid0 personality registered for level 0[ 2.014413] md: raid1 personality registered for level 1[ 2.019571] hub 8-0:1.0: USB hub found[ 2.019580] hub 8-0:1.0: 2 ports detected[ 2.020358] xor: automatically using best checksumming function: generic_sse[ 2.027257] generic_sse: 6060.000 MB/sec[ 2.027260] xor: using function: generic_sse (6060.000 MB/sec)[ 2.045358] raid6: int64x1 1769 MB/s[ 2.062289] raid6: int64x2 1992 MB/s[ 2.079295] raid6: int64x4 1531 MB/s[ 2.096272] raid6: int64x8 1148 MB/s[ 2.113278] raid6: sse2x1 2812 MB/s[ 2.130287] raid6: sse2x2 3644 MB/s[ 2.157838] raid6: sse2x4 3437 MB/s[ 2.157840] raid6: using algorithm sse2x2 (3644 MB/s)[ 2.164497] md: raid6 personality registered for level 6[ 2.164501] md: raid5 personality registered for level 5[ 2.164503] md: raid4 personality registered for level 4[ 2.174296] md: raid10 personality registered for level 10[ 2.253022] usb 1-2: new low speed USB device using ohci_hcd and address 2[ 2.417565] usbcore: registered new interface driver hiddev[ 2.423641] input: KYE NetScroll+ Traveler as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input3[ 2.423767] generic-usb 0003:0458:002E.0001: input,hidraw0: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0000:00:13.0-2/input0[ 2.423833] usbcore: registered new interface driver usbhid[ 2.423835] usbhid: USB HID core driver[ 2.478994] EXT3-fs (sda3): mounted filesystem with writeback data mode[ 2.479398] kjournald starting. Commit interval 5 seconds[ 2.511280] usb 3-6: new high speed USB device using ehci_hcd and address 2[ 3.680587] Adding 1020116k swap on /dev/sdc2. Priority:1 extents:1 across:1020116k [ 4.364008] udev: starting version 147[ 7.114328] nvidia: module license 'NVIDIA' taints kernel.[ 7.114333] Disabling lock debugging due to kernel taint[ 7.674518] ali1535_smbus 0000:00:15.1: ALI1535_smb region uninitialized - upgrade BIOS?[ 7.674522] ali1535_smbus 0000:00:15.1: ALI1535 not detected, module not inserted.[ 7.677332] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)[ 7.677369] uli526x 0000:00:12.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20[ 7.689325] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8904[ 7.689354] usbcore: registered new interface driver usblp[ 7.690799] lp: driver loaded but no devices found[ 7.715578] eth1: ULi M5263 at pci0000:00:12.0, 00:13:8f:b3:14:a4, irq 20.[ 7.715615] ali15x3_smbus 0000:00:15.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr[ 7.715621] ali15x3_smbus 0000:00:15.1: ALI15X3 not detected, module not inserted.[ 7.778871] ip_tables: (C) 2000-2006 Netfilter Core Team[ 7.924430] parport_pc 00:05: reported by Plug and Play ACPI[ 7.924486] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA][ 7.936503] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled[ 7.936628] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A[ 7.969588] nvidia 0000:01:00.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25[ 7.969599] nvidia 0000:01:00.0: setting latency timer to 64[ 7.969603] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem[ 7.969866] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.08 Thu Feb 25 04:10:13 PST 2010[ 8.007159] lp0: using parport0 (interrupt-driven).[ 8.010426] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A[ 8.079082] rt2500pci 0000:05:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18[ 8.095736] phy0: Selected rate control algorithm 'minstrel'[ 8.096628] Registered led device: rt2500pci-phy0::radio[ 8.096647] Registered led device: rt2500pci-phy0::quality[ 8.275570] EXT3-fs (sda3): using internal journal[ 8.676489] HDA Intel 0000:00:14.0: PCI INT C -> GSI 22 (level, low) -> IRQ 22[ 9.025285] hda_codec: ALC888: BIOS auto-probing.[ 9.284316] kjournald starting. Commit interval 5 seconds[ 9.284617] EXT3-fs (sda2): using internal journal[ 9.284622] EXT3-fs (sda2): mounted filesystem with writeback data mode[ 9.335862] EXT4-fs (sdb5): mounted filesystem with ordered data mode[ 9.440321] EXT4-fs (sdb1): mounted filesystem with ordered data mode[ 9.495335] device label btrfs devid 1 transid 8160 /dev/sdc1[ 14.718199] ADDRCONF(NETDEV_UP): wlan0: link is not ready[ 14.723394] r8169: eth0: link down[ 14.723420] r8169: eth0: link down[ 14.724087] ADDRCONF(NETDEV_UP): eth0: link is not ready[ 14.734717] ADDRCONF(NETDEV_UP): eth1: link is not ready[ 17.733660] uli526x: eth1 NIC Link is Down[ 18.364171] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)[ 18.364917] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use[ 18.364920] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or[ 18.364923] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.[ 22.001021] Clocksource tsc unstable (delta = -250061447 ns)[ 26.558333] virbr0: starting userspace STP failed, starting kernel STP[ 28.794902] libvirtd[2775]: segfault at 0 ip 00007f9380cb6346 sp 00007fff70619bf0 error 4 in libvirt.so.0.7.0[7f9380c91000+d8000][ 29.569139] usb 3-6: usbfs: interface 0 claimed by usblp while 'usb' sets config #1[ 91.906966] wlan0: direct probe to AP 00:80:5a:31:90:db (try 1)[ 91.908337] wlan0: direct probe responded[ 91.908345] wlan0: authenticate with AP 00:80:5a:31:90:db (try 1)[ 91.909806] wlan0: authenticated[ 91.909846] wlan0: associate with AP 00:80:5a:31:90:db (try 1)[ 91.912713] wlan0: RX AssocResp from 00:80:5a:31:90:db (capab=0x471 status=0 aid=1)[ 91.912723] wlan0: associated[ 91.914638] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready[ 102.749276] wlan0: no IPv6 routers present[ 661.429732] nautilus[3167]: segfault at 7f9d26ab0770 ip 00007f9d26ab0770 sp 00007fffb3d4a198 error 14[ 661.780040] wlan0: deauthenticating from 00:80:5a:31:90:db by local choice (reason=3)[ 2054.961505] wlan0: direct probe to AP 00:80:5a:31:90:db (try 1)[ 2055.161276] wlan0: direct probe to AP 00:80:5a:31:90:db (try 2)[ 2055.162562] wlan0: direct probe responded[ 2055.162568] wlan0: authenticate with AP 00:80:5a:31:90:db (try 1)[ 2055.164451] wlan0: authenticated[ 2055.164476] wlan0: associate with AP 00:80:5a:31:90:db (try 1)[ 2055.168071] wlan0: RX AssocResp from 00:80:5a:31:90:db (capab=0x471 status=0 aid=2)[ 2055.168076] wlan0: associated[ 5369.959134] hda-intel: Too big adjustment 32[ 5369.989200] hda-intel: Too big adjustment 32[ 5375.274771] hda-intel: Too big adjustment 32[ 5375.294130] hda-intel: Too big adjustment 32