rendered paste bodyInitializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-0.52.rc8.git6.fc13.i686 (mockbuild@x86-02.phx2.fedoraproject.org) (gcc version 4.4.3 20100211 (Red Hat 4.4.3-6) (GCC) ) #1 SMP Tue Feb 23 05:11:28 UTC 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.3 present.
last_pfn = 0x3fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00f4f80] f4f80
init_memory_mapping: 0000000000000000-00000000373fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 7000-d000
RAMDISK: 3e3dc000 - 3ffee37f
Allocated new RAMDISK: 0129c000 - 02eae37f
Move RAMDISK from 000000003e3dc000 - 000000003ffee37e to 0129c000 - 02eae37e
ACPI: RSDP 000f6a10 00014 (v00 GBT )
ACPI: RSDT 3fff3000 00034 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: FACP 3fff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: DSDT 3fff30c0 04B39 (v01 GBT NVDAACPI 00001000 MSFT 0100000C)
ACPI: FACS 3fff0000 00040
ACPI: SSDT 3fff7c80 00188 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: MCFG 3fff7e40 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: APIC 3fff7c00 0007C (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: Local APIC address 0xfee00000
139MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 0000a000 - 00010e80
(14 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000400000 - 000129452c] TEXT DATA BSS ==> [0000400000 - 000129452c]
#3 [0001295000 - 000129b092] BRK ==> [0001295000 - 000129b092]
#4 [00000f4f90 - 0000100000] BIOS reserved ==> [00000f4f90 - 0000100000]
#5 [00000f4f80 - 00000f4f90] MP-table mpf ==> [00000f4f80 - 00000f4f90]
#6 [000009f800 - 00000f0d00] BIOS reserved ==> [000009f800 - 00000f0d00]
#7 [00000f0e64 - 00000f4f80] BIOS reserved ==> [00000f0e64 - 00000f4f80]
#8 [00000f0d00 - 00000f0e64] MP-table mpc ==> [00000f0d00 - 00000f0e64]
#9 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000]
#10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
#11 [0000007000 - 000000a000] PGTABLE ==> [0000007000 - 000000a000]
#12 [000129c000 - 0002eae37f] NEW RAMDISK ==> [000129c000 - 0002eae37f]
#13 [000000a000 - 0000011000] BOOTMAP ==> [000000a000 - 0000011000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0003fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0003fff0
On node 0 totalpages: 262031
free_area_init_node: node 0, pgdat c0a10840, node_mem_map c2eb0000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 280 pages used for memmap
HighMem zone: 35546 pages, LIFO batch:7
Using APIC driver default
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:90000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 334 pages/cpu @c3800000 s1346136 r0 d21928 u2097152
pcpu-alloc: s1346136 r0 d21928 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259983
Kernel command line: initrd=/fedora.initrd waitusb=5 stage2=hd:UUID=a156bc69-cb1e-4fca-99f2-12b96a69fb86 BOOT_IMAGE=fedora
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 5242560 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000373fe:0003fff0)
Memory: 987024k/1048512k available (3808k kernel code, 60588k reserved, 2536k data, 1844k init, 143304k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc0a33000 - 0xc0c00000 (1844 kB)
.data : 0xc07b814c - 0xc0a32430 (2536 kB)
.text : 0xc0400000 - 0xc07b814c (3808 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 3823 kB
per task-struct memory footprint: 1920 bytes
ODEBUG: 11 of 11 active objects replaced
Fast TSC calibration using PIT
Detected 2010.071 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.14 BogoMIPS (lpj=2010071)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Checking 'hlt' instruction... OK.
ACPI: Core revision 20091214
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20875 entries in 41 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
lockdep: fixing up alternatives.
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (8040.05 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=652 bytes
sizeof(dentry)=164 bytes
sizeof(ext3inode)=920 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=5484 bytes
devtmpfs: initialized
regulator: core version 0.5
Time: 17:01:54 Date: 03/09/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:01.1: reg 10: [io 0xec00-0xec1f]
pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xf6002000-0xf6002fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 10: [io 0xb800-0xb8ff]
pci 0000:00:04.0: reg 14: [io 0xbc00-0xbcff]
pci 0000:00:04.0: reg 18: [mem 0xf6005000-0xf6005fff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:07.0: reg 10: [io 0x09f0-0x09f7]
pci 0000:00:07.0: reg 14: [io 0x0bf0-0x0bf3]
pci 0000:00:07.0: reg 18: [io 0x0970-0x0977]
pci 0000:00:07.0: reg 1c: [io 0x0b70-0x0b73]
pci 0000:00:07.0: reg 20: [io 0xd000-0xd00f]
pci 0000:00:07.0: reg 24: [mem 0xf6000000-0xf6000fff]
pci 0000:00:08.0: reg 10: [io 0x09e0-0x09e7]
pci 0000:00:08.0: reg 14: [io 0x0be0-0x0be3]
pci 0000:00:08.0: reg 18: [io 0x0960-0x0967]
pci 0000:00:08.0: reg 1c: [io 0x0b60-0x0b63]
pci 0000:00:08.0: reg 20: [io 0xe400-0xe40f]
pci 0000:00:08.0: reg 24: [mem 0xf6001000-0xf6001fff]
pci 0000:00:0a.0: reg 10: [mem 0xf6003000-0xf6003fff]
pci 0000:00:0a.0: reg 14: [io 0xe800-0xe807]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:01:07.0: reg 10: [mem 0xf2000000-0xf2ffffff]
pci 0000:01:07.1: reg 10: [mem 0xf3000000-0xf3ffffff]
pci 0000:01:07.2: reg 10: [mem 0xf4000000-0xf4ffffff]
pci 0000:01:0a.0: reg 10: [mem 0xf5004000-0xf50047ff]
pci 0000:01:0a.0: reg 14: [mem 0xf5000000-0xf5003fff]
pci 0000:01:0a.0: supports D1 D2
pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:0a.0: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0xf2000000-0xf5ffffff]
pci 0000:00:0b.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:0c.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:0d.0: PCI bridge to [bus 04-04]
pci 0000:00:0d.0: bridge window [io 0x7000-0x7fff]
pci 0000:05:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:05:00.0: reg 18: [mem 0xf1000000-0xf100ffff 64bit]
pci 0000:05:00.0: reg 20: [io 0xa000-0xa0ff]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.1: reg 10: [mem 0xf1010000-0xf101ffff 64bit]
pci 0000:05:00.1: supports D1 D2
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0e.0: PCI bridge to [bus 05-05]
pci 0000:00:0e.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0e.0: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:0e.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource jiffies
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1080-0x10ff] has been reserved
system 00:01: [io 0x1400-0x147f] has been reserved
system 00:01: [io 0x1480-0x14ff] has been reserved
system 00:01: [io 0x1800-0x187f] has been reserved
system 00:01: [io 0x1880-0x18ff] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: [io 0x0295-0x0314] has been reserved
system 00:02: [io 0x0290-0x0294] has been reserved
system 00:02: [io 0x0294-0x0297] could not be reserved
system 00:0c: [mem 0xd0000000-0xdfffffff] has been reserved
system 00:0d: [mem 0x000d5800-0x000d7fff] has been reserved
system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0d: [mem 0x3fff0000-0x3fffffff] could not be reserved
system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x00100000-0x3ffeffff] could not be reserved
system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
Switching to clocksource acpi_pm
kstop/0 used greatest stack depth: 7288 bytes left
pci 0000:00:09.0: PCI bridge to [bus 01-01]
pci 0000:00:09.0: bridge window [io disabled]
pci 0000:00:09.0: bridge window [mem 0xf2000000-0xf5ffffff]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:00:0b.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:0b.0: bridge window [mem disabled]
pci 0000:00:0b.0: bridge window [mem pref disabled]
pci 0000:00:0c.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:0c.0: bridge window [mem disabled]
pci 0000:00:0c.0: bridge window [mem pref disabled]
pci 0000:00:0d.0: PCI bridge to [bus 04-04]
pci 0000:00:0d.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:0d.0: bridge window [mem disabled]
pci 0000:00:0d.0: bridge window [mem pref disabled]
pci 0000:05:00.0: BAR 6: assigned [mem 0xf0000000-0xf001ffff pref]
pci 0000:00:0e.0: PCI bridge to [bus 05-05]
pci 0000:00:0e.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0e.0: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:0e.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf5ffffff]
pci_bus 0000:01: resource 3 [io 0x0000-0xffff]
pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffff]
pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
pci_bus 0000:05: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2621440 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 3, 49152 bytes)
UDP-Lite hash table entries: 512 (order: 3, 49152 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Linking AER extended capability
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Linking AER extended capability
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Linking AER extended capability
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Linking AER extended capability
pci 0000:05:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28744k freed
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1268154116.118:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1705
SELinux: Registering netfilter hooks
cryptomgr_test used greatest stack depth: 6928 bytes left
cryptomgr_test used greatest stack depth: 6852 bytes left
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:0d.0: setting latency timer to 64
pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
pcieport 0000:00:0e.0: setting latency timer to 64
pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
ehci_hcd 0000:00:02.1: irq 23, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33-0.52.rc8.git6.fc13.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xf6002000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33-0.52.rc8.git6.fc13.i686 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (15879 buckets, 63516 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 2:421:36
bdi 7:1: hash matches
rtc_cmos 00:04: setting system clock to 2010-03-09 17:01:57 UTC (1268154117)
Initalizing network drop monitor service
Freeing unused kernel memory: 1844k freed
Write protecting the kernel text: 3812k
Write protecting the kernel read-only data: 1852k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
udevd used greatest stack depth: 6636 bytes left
modprobe used greatest stack depth: 6596 bytes left
dbus-uuidgen used greatest stack depth: 6580 bytes left
psmouse serio1: ID: 10 00 64
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: New USB device found, idVendor=1976, idProduct=4082
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: USB Reader
usb 1-2: Manufacturer: ChipsBnk
usb 1-2: SerialNumber: 110074973765
Initializing USB Mass Storage driver...
scsi0 : usb-storage 1-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
modprobe used greatest stack depth: 6528 bytes left
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
input: PC Speaker as /devices/platform/pcspkr/input/input5
No iBFT detected.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
modprobe used greatest stack depth: 6516 bytes left
modprobe used greatest stack depth: 6388 bytes left
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi1 : pata_amd
scsi2 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
sata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:07.0: setting latency timer to 64
scsi3 : sata_nv
scsi4 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd000 irq 21
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd008 irq 21
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20
forcedeth 0000:00:0a.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
ata3: SATA link down (SStatus 0 SControl 300)
ata1.01: ATAPI: LITE-ON DVDRW SHW-1635S, YS0Y, max UDMA/66
ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (600:30:0x1c)
ata1.01: configured for UDMA/66
scsi 1:0:1:0: CD-ROM LITE-ON DVDRW SHW-1635S YS0Y PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sr 1:0:1:0: Attached scsi generic sg0 type 5
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x3f1 @ 7, addr 00:14:85:35:a4:8a
forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:08.0: setting latency timer to 64
scsi5 : sata_nv
scsi6 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 23
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 23
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATA-8: ST3750330AS, SD15, max UDMA/133
ata6.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata6.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI: 5
sd 6:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 6:0:0:0: [sda] Attached SCSI disk
modprobe used greatest stack depth: 6252 bytes left
[drm] Initialized drm 1.1.0 20060810
modprobe used greatest stack depth: 6196 bytes left
scsi_id used greatest stack depth: 5980 bytes left
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
firewire_ohci 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
firewire_ohci: Added fw-ohci device 0000:01:0a.0, OHCI version 1.10
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
radeon 0000:05:00.0: setting latency timer to 64
[drm] radeon: Initializing kernel modesetting.
[drm] register mmio base: 0xF1000000
[drm] register mmio size: 65536
ATOM BIOS: GV
[drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[drm] Generation 2 PCI interface, using max accessible memory
[drm] radeon: VRAM 256M
[drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF
[drm] radeon: GTT 512M
[drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
radeon 0000:05:00.0: irq 28 for MSI/MSI-X
[drm] radeon: using MSI.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 437410 kiB.
[TTM] Zone highmem: Available graphics memory: 509062 kiB.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[drm] radeon: 1 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x00040000).
[drm] radeon: cp idle (0x10000C03)
[drm] Loading R500 Microcode
platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
[drm] radeon: ring at 0x0000000020000000
[drm] ring test succeeded in 6 usecs
firmware[309]: segfault at 46 ip 00170007 sp bfcfcc10 error 4 in libc.so.6[110000+178000]
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Default TV standard: NTSC
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I
[drm] HPD2
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP3: INTERNAL_LVTM1
[drm] Connector 1:
[drm] S-video
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] VGA
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] fb mappable at 0xE00C0000
[drm] vram apper at 0xE0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] Initialized radeon 2.0.0 20080528 for 0000:05:00.0 on minor 0
modprobe used greatest stack depth: 4656 bytes left
firewire_core: created device fw0: GUID 00148556003672eb, S800
scsi 0:0:0:0: Direct-Access ChipsBnk Multi-Reader 4082 PQ: 0 ANSI: 2
sd 0:0:0:0: Attached scsi generic sg2 type 0
sd 0:0:0:0: [sdb] 3995648 512-byte logical blocks: (2.04 GB/1.90 GiB)
sd 0:0:0:0: [sdb] Write Protect is off
sd 0:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 0:0:0:0: [sdb] Assuming drive cache: write through
sd 0:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 0:0:0:0: [sdb] Assuming drive cache: write through
sd 0:0:0:0: [sdb] Attached SCSI removable disk
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: 8192 avtab hash slots, 155270 rules.
SELinux: 8192 avtab hash slots, 155270 rules.
SELinux: 8 users, 11 roles, 3076 types, 153 bools, 1 sens, 1024 cats
SELinux: 77 classes, 155270 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev loop0, type squashfs), not configured for labeling
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1268154185.122:2): policy loaded auid=4294967295 ses=4294967295
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
async_tx: api initialized (async)
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 6072.000 MB/sec
xor: using function: pIII_sse (6072.000 MB/sec)
raid6: int32x1 835 MB/s
raid6: int32x2 1015 MB/s
raid6: int32x4 582 MB/s
raid6: int32x8 417 MB/s
raid6: mmxx1 1613 MB/s
raid6: mmxx2 2667 MB/s
raid6: sse1x1 746 MB/s
raid6: sse1x2 1164 MB/s
raid6: sse2x1 1183 MB/s
raid6: sse2x2 1761 MB/s
raid6: using algorithm sse2x2 (1761 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
md: linear personality registered for level -1
device-mapper: multipath: version 1.1.1 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
REISERFS (device dm-9): found reiserfs format "3.6" with standard journal
REISERFS (device dm-9): using ordered data mode
REISERFS (device dm-9): journal params: device dm-9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device dm-9): checking transaction log (dm-9)
REISERFS (device dm-9): Using r5 hash to sort names
SELinux: initialized (dev dm-9, type reiserfs), uses genfs_contexts