rendered paste body/*
*
* linux/arch/arm/mach-s3c2410/mach-amlm5900.c
*
* Copyright (c) 2006 American Microsystems Limited
* David Anders <danders@amltd.com>
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* @History:
* derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
* Ben Dooks <ben@simtec.co.uk>
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include "devs.h"
#include "cpu.h"
#ifdef CONFIG_MTD_PARTITIONS
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
static struct resource amlm5900_nor_resource = {
.start = 0x00000000,
.end = 0x01000000 - 1,
.flags = IORESOURCE_MEM,
};
static struct mtd_partition amlm5900_mtd_partitions[] = {
{
.name = "System",
.size = 0x240000,
.offset = 0,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "Kernel",
.size = 0x100000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "Ramdisk",
.size = 0x300000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "JFFS2",
.size = 0x9A0000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "Settings",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
},
};
static struct physmap_flash_data amlm5900_flash_data = {
.width = 2,
.parts = amlm5900_mtd_partitions,
.nr_parts = ARRAY_SIZE(amlm5900_mtd_partitions),
};
static struct platform_device amlm5900_device_nor = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &amlm5900_flash_data,
},
.num_resources = 1,
.resource = &amlm5900_nor_resource,
};
#endif
static struct map_desc amlm5900_iodesc[] __initdata = {
{
.virtual = (u32)S3C24XX_VA_SPI,
.pfn = __phys_to_pfn(S3C2410_PA_SPI),
.length = SZ_1M,
.type = MT_DEVICE,
},
};
#define UCON S3C2410_UCON_DEFAULT
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg amlm5900_uartcfgs[] = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
};
static struct platform_device *amlm5900_devices[] __initdata = {
#ifdef CONFIG_FB_S3C2410
&s3c_device_lcd,
#endif
&s3c_device_adc,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_usb,
&s3c_device_rtc,
&s3c_device_usbgadget,
&s3c_device_sdi,
#ifdef CONFIG_MTD_PARTITIONS
&amlm5900_device_nor,
#endif
};
static struct s3c24xx_board amlm5900_board __initdata = {
.devices = amlm5900_devices,
.devices_count = ARRAY_SIZE(amlm5900_devices),
};
void __init amlm5900_map_io(void)
{
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
s3c24xx_set_board(&amlm5900_board);
}
#ifdef CONFIG_FB_S3C2410
#include <asm/arch/fb.h>
#include <asm/arch/regs-lcd.h>
static struct s3c2410fb_mach_info __initdata amlm5900_lcd_info = {
.width = 160,
.height = 160,
/* commented out until stn patch is submitted
* .type = S3C2410_LCDCON1_STN4,
*/
.gpccon = 0xaaaaaaaa,
.gpccon_mask = 0xffffffff,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
.gpdcon = 0xaaaaaaaa,
.gpdcon_mask = 0xffffffff,
.gpdup = 0x0000ffff,
.gpdup_mask = 0xffffffff,
.xres = {
.min = 160,
.max = 160,
.defval = 160,
},
.yres = {
.min = 160,
.max = 160,
.defval = 160,
},
.bpp = {
.min = 4,
.max = 4,
.defval = 4,
},
.regs = {
.lcdcon1 = 0x00008225,
.lcdcon2 = 0x0027c000,
.lcdcon3 = 0x00182708,
.lcdcon4 = 0x00000002,
.lcdcon5 = 0x00000001,
},
};
static void amlm5900_init_lcd(void)
{
s3c24xx_fb_set_platdata(&amlm5900_lcd_info);
}
#else
#define amlm5900_init_lcd NULL
#endif
#ifdef CONFIG_PM
static irqreturn_t
amlm5900_wake_interrupt(int irq, void *ignored, struct pt_regs *regs)
{
return IRQ_HANDLED;
}
static void amlm5900_init_pm(void)
{
int ret = 0;
ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt,
IRQF_TRIGGER_RISING | IRQF_SHARED,
"amlm5900_wakeup", &amlm5900_wake_interrupt);
if (ret != 0) {
printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret);
} else {
enable_irq_wake(IRQ_EINT9);
/* configure the suspend/resume status pin */
s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
s3c2410_gpio_pullup(S3C2410_GPF2, 0);
}
}
#else
#define amlm5900_init_pm NULL
#endif
static void __init amlm5900_init(void)
{
amlm5900_init_pm();
amlm5900_init_lcd();
}
MACHINE_START(AML_M5900, "AML_M5900")
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = amlm5900_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = amlm5900_init,
.timer = &s3c24xx_timer,
MACHINE_END