rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.33-0.slh.5-sidux-amd64 (Debian 2.6.33-5) (s.l-h@gmx.de) (gcc version 4.4.3 (Debian 4.4.3-3) ) #1 SMP PREEMPT Fri Mar 5 22:39:32 UTC 2010
[ 0.000000] Command line: root=UUID=391a78de-7ae9-48d3-a0a8-cc2a75cbe757 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 write-through
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000f5400] f5400
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fee0000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fee0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fee0000 @ 8000-c000
[ 0.000000] RAMDISK: 3750a000 - 37fef7ca
[ 0.000000] ACPI: RSDP 00000000000f6da0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 000000007fee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 000000007fee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 000000007fee3180 05222 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 000000007fee0000 00040
[ 0.000000] ACPI: HPET 000000007fee8500 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 000000007fee8580 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 000000007fee8400 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 000000007fee8600 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.000000] ACPI: SSDT 000000007fee8a90 00275 (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fee0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fee0000
[ 0.000000] NODE_DATA [000000000000a000 - 000000000000efff]
[ 0.000000] bootmap [000000000000f000 - 000000000001efdf] pages 10
[ 0.000000] (12 early reservations) ==> bootmem [0000000000 - 007fee0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001000000 - 00016862f8] TEXT DATA BSS ==> [0001000000 - 00016862f8]
[ 0.000000] #2 [003750a000 - 0037fef7ca] RAMDISK ==> [003750a000 - 0037fef7ca]
[ 0.000000] #3 [0001687000 - 00016870b6] BRK ==> [0001687000 - 00016870b6]
[ 0.000000] #4 [00000f5410 - 0000100000] BIOS reserved ==> [00000f5410 - 0000100000]
[ 0.000000] #5 [00000f5400 - 00000f5410] MP-table mpf ==> [00000f5400 - 00000f5410]
[ 0.000000] #6 [000009e800 - 00000f0d00] BIOS reserved ==> [000009e800 - 00000f0d00]
[ 0.000000] #7 [00000f0e9c - 00000f5400] BIOS reserved ==> [00000f0e9c - 00000f5400]
[ 0.000000] #8 [00000f0d00 - 00000f0e9c] MP-table mpc ==> [00000f0d00 - 00000f0e9c]
[ 0.000000] #9 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
[ 0.000000] #10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
[ 0.000000] #11 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007fee0
[ 0.000000] On node 0 totalpages: 523902
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 105 pages reserved
[ 0.000000] DMA zone: 3837 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7109 pages used for memmap
[ 0.000000] DMA32 zone: 512795 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:50100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001800000 s89432 r8192 d21160 u524288
[ 0.000000] pcpu-alloc: s89432 r8192 d21160 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516632
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=391a78de-7ae9-48d3-a0a8-cc2a75cbe757 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2048448k/2096000k available (3561k kernel code, 392k absent, 47160k reserved, 1728k data, 664k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Experimental preemptable hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1866.779 MHz processor.
[ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.55 BogoMIPS (lpj=1866779)
[ 0.001029] Security Framework initialized
[ 0.001037] SELinux: Disabled at boot.
[ 0.001234] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002558] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.003039] Mount-cache hash table entries: 256
[ 0.003185] Initializing cgroup subsys ns
[ 0.003189] Initializing cgroup subsys cpuacct
[ 0.003193] Initializing cgroup subsys devices
[ 0.003195] Initializing cgroup subsys freezer
[ 0.003197] Initializing cgroup subsys net_cls
[ 0.003199] Initializing cgroup subsys blkio
[ 0.003229] CPU: Physical Processor ID: 0
[ 0.003230] CPU: Processor Core ID: 0
[ 0.003234] mce: CPU supports 6 MCE banks
[ 0.003243] CPU0: Thermal monitoring enabled (TM2)
[ 0.003247] using mwait in idle threads.
[ 0.003248] Performance Events: Core2 events, Intel PMU driver.
[ 0.003254] ... version: 2
[ 0.003255] ... bit width: 40
[ 0.003257] ... generic registers: 2
[ 0.003258] ... value mask: 000000ffffffffff
[ 0.003260] ... max period: 000000007fffffff
[ 0.003262] ... fixed-purpose events: 3
[ 0.003263] ... event mask: 0000000700000003
[ 0.004364] ACPI: Core revision 20091214
[ 0.011880] Setting APIC routing to flat
[ 0.012199] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.022213] CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 0.026022] Booting Node 0, Processors #1
[ 0.098022] Brought up 2 CPUs
[ 0.098025] Total of 2 processors activated (7466.78 BogoMIPS).
[ 0.098488] devtmpfs: initialized
[ 0.099044] regulator: core version 0.5
[ 0.099050] NET: Registered protocol family 16
[ 0.099069] ACPI: bus type pci registered
[ 0.099069] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
[ 0.099069] PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
[ 0.102464] PCI: Using configuration type 1 for base access
[ 0.102478] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.102478] mtrr: probably your BIOS does not setup all CPUs.
[ 0.102478] mtrr: corrected configuration.
[ 0.104040] bio: create slab <bio-0> at 0
[ 0.105192] ACPI: EC: Look up EC in DSDT
[ 0.111468] ACPI: Interpreter enabled
[ 0.111474] ACPI: (supports S0 S3 S4 S5)
[ 0.111498] ACPI: Using IOAPIC for interrupt routing
[ 0.119256] ACPI: No dock devices found.
[ 0.119360] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.119394] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[ 0.120135] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.120139] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.120141] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.120144] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.120147] pci_root PNP0A03:00: host bridge window [mem 0x7ff00000-0xfebfffff] (ignored)
[ 0.120221] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.120224] pci 0000:00:01.0: PME# disabled
[ 0.120284] pci 0000:00:1a.0: reg 20: [io 0xd000-0xd01f]
[ 0.120328] pci 0000:00:1a.1: reg 20: [io 0xc000-0xc01f]
[ 0.120369] pci 0000:00:1a.7: reg 10: [mem 0xf6105000-0xf61053ff]
[ 0.120439] pci 0000:00:1b.0: reg 10: [mem 0xf6100000-0xf6103fff 64bit]
[ 0.120478] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.120482] pci 0000:00:1b.0: PME# disabled
[ 0.120542] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.120546] pci 0000:00:1c.0: PME# disabled
[ 0.120610] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.120614] pci 0000:00:1c.3: PME# disabled
[ 0.120679] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.120683] pci 0000:00:1c.4: PME# disabled
[ 0.120725] pci 0000:00:1d.0: reg 20: [io 0xc400-0xc41f]
[ 0.120770] pci 0000:00:1d.1: reg 20: [io 0xc800-0xc81f]
[ 0.120814] pci 0000:00:1d.2: reg 20: [io 0xcc00-0xcc1f]
[ 0.120854] pci 0000:00:1d.7: reg 10: [mem 0xf6104000-0xf61043ff]
[ 0.121038] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.121042] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.121046] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.121049] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.121099] pci 0000:00:1f.2: reg 10: [io 0xd400-0xd407]
[ 0.121105] pci 0000:00:1f.2: reg 14: [io 0xd800-0xd803]
[ 0.121110] pci 0000:00:1f.2: reg 18: [io 0xdc00-0xdc07]
[ 0.121115] pci 0000:00:1f.2: reg 1c: [io 0xe000-0xe003]
[ 0.121121] pci 0000:00:1f.2: reg 20: [io 0xe400-0xe41f]
[ 0.121126] pci 0000:00:1f.2: reg 24: [mem 0xf6106000-0xf61067ff]
[ 0.121153] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.121156] pci 0000:00:1f.2: PME# disabled
[ 0.121179] pci 0000:00:1f.3: reg 10: [mem 0xf6107000-0xf61070ff]
[ 0.121195] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.121237] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.121246] pci 0000:01:00.0: reg 18: [mem 0xf1000000-0xf100ffff 64bit]
[ 0.121251] pci 0000:01:00.0: reg 20: [io 0x7000-0x70ff]
[ 0.121260] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.121278] pci 0000:01:00.0: supports D1 D2
[ 0.121305] pci 0000:01:00.1: reg 10: [mem 0xf1010000-0xf1013fff 64bit]
[ 0.121338] pci 0000:01:00.1: supports D1 D2
[ 0.121398] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.121401] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 0.121405] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.121409] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.121447] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.121451] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.121534] pci 0000:03:00.0: reg 24: [mem 0xf6000000-0xf6001fff]
[ 0.121572] pci 0000:03:00.0: PME# supported from D3hot
[ 0.121578] pci 0000:03:00.0: PME# disabled
[ 0.121623] pci 0000:03:00.1: reg 10: [io 0x8000-0x8007]
[ 0.121632] pci 0000:03:00.1: reg 14: [io 0x8400-0x8403]
[ 0.121640] pci 0000:03:00.1: reg 18: [io 0x8800-0x8807]
[ 0.121649] pci 0000:03:00.1: reg 1c: [io 0x8c00-0x8c03]
[ 0.121658] pci 0000:03:00.1: reg 20: [io 0x9000-0x900f]
[ 0.121718] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.121760] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.121764] pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff]
[ 0.121768] pci 0000:00:1c.3: bridge window [mem 0xf6000000-0xf60fffff]
[ 0.121815] pci 0000:04:00.0: reg 10: [mem 0xf3000000-0xf3003fff 64bit]
[ 0.121823] pci 0000:04:00.0: reg 18: [io 0xa000-0xa0ff]
[ 0.121848] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.121887] pci 0000:04:00.0: supports D1 D2
[ 0.121889] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.121894] pci 0000:04:00.0: PME# disabled
[ 0.121907] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.121946] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.121949] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
[ 0.121953] pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf3ffffff]
[ 0.121985] pci 0000:05:00.0: reg 10: [io 0xb000-0xb0ff]
[ 0.121992] pci 0000:05:00.0: reg 14: [mem 0xf5000000-0xf50000ff]
[ 0.122050] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.122069] pci 0000:05:00.0: supports D1 D2
[ 0.122071] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.122075] pci 0000:05:00.0: PME# disabled
[ 0.122103] pci 0000:05:01.0: reg 10: [io 0xb400-0xb41f]
[ 0.122147] pci 0000:05:01.0: supports D1 D2
[ 0.122174] pci 0000:05:01.1: reg 10: [io 0xb800-0xb807]
[ 0.122218] pci 0000:05:01.1: supports D1 D2
[ 0.122253] pci 0000:05:02.0: reg 10: [mem 0xf5001000-0xf50013ff]
[ 0.122298] pci 0000:05:02.0: supports D1 D2
[ 0.122342] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.122346] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.122349] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.122375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.122538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.122599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.122666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.122722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.140099] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.140205] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.140313] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.140415] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.140518] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.141041] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
[ 0.141144] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.141247] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.141300] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.141300] vgaarb: loaded
[ 0.141300] PCI: Using ACPI for IRQ routing
[ 0.141300] PCI: pci_cache_line_size set to 64 bytes
[ 0.142038] NetLabel: Initializing
[ 0.142040] NetLabel: domain hash size = 128
[ 0.142041] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.142054] NetLabel: unlabeled traffic allowed by default
[ 0.142059] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.142063] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.142068] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.145008] Switching to clocksource tsc
[ 0.146330] pnp: PnP ACPI init
[ 0.146343] ACPI: bus type pnp registered
[ 0.149119] pnp: PnP ACPI: found 12 devices
[ 0.149122] ACPI: ACPI bus type pnp unregistered
[ 0.149133] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.149136] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.149139] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.149141] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.149144] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.149152] system 00:08: [io 0x0400-0x04bf] could not be reserved
[ 0.149158] system 00:09: [mem 0xd0000000-0xdfffffff] has been reserved
[ 0.149163] system 00:0a: [mem 0x000d5000-0x000d7fff] has been reserved
[ 0.149166] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.149169] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.149172] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.149175] system 00:0a: [mem 0x7fee0000-0x7fefffff] could not be reserved
[ 0.149178] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.149181] system 00:0a: [mem 0x00100000-0x7fedffff] could not be reserved
[ 0.149184] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.149187] system 00:0a: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.149189] system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.149192] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.149195] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.149198] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.149201] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved
[ 0.154246] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[ 0.154250] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.154253] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.154256] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80600000-0x807fffff pref]
[ 0.154259] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80800000-0x808fffff pref]
[ 0.154263] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0000000-0xf001ffff pref]
[ 0.154266] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.154269] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 0.154272] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.154276] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.154280] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.154283] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.154288] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.154292] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.154298] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.154301] pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff]
[ 0.154305] pci 0000:00:1c.3: bridge window [mem 0xf6000000-0xf60fffff]
[ 0.154309] pci 0000:00:1c.3: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.154316] pci 0000:04:00.0: BAR 6: assigned [mem 0x80600000-0x8061ffff pref]
[ 0.154318] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.154321] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
[ 0.154326] pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf3ffffff]
[ 0.154330] pci 0000:00:1c.4: bridge window [mem 0x80600000-0x807fffff pref]
[ 0.154336] pci 0000:05:00.0: BAR 6: assigned [mem 0x80800000-0x8080ffff pref]
[ 0.154339] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.154341] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.154346] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.154350] pci 0000:00:1e.0: bridge window [mem 0x80800000-0x808fffff pref]
[ 0.154361] alloc irq_desc for 16 on node -1
[ 0.154363] alloc kstat_irqs on node -1
[ 0.154368] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.154372] pci 0000:00:01.0: setting latency timer to 64
[ 0.154379] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.154383] pci 0000:00:1c.0: setting latency timer to 64
[ 0.154390] alloc irq_desc for 19 on node -1
[ 0.154392] alloc kstat_irqs on node -1
[ 0.154395] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.154399] pci 0000:00:1c.3: setting latency timer to 64
[ 0.154406] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.154410] pci 0000:00:1c.4: setting latency timer to 64
[ 0.154416] pci 0000:00:1e.0: setting latency timer to 64
[ 0.154420] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.154422] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.154425] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
[ 0.154427] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.154429] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.154432] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
[ 0.154434] pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
[ 0.154436] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.154439] pci_bus 0000:03: resource 0 [io 0x8000-0x9fff]
[ 0.154441] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf60fffff]
[ 0.154443] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.154445] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 0.154448] pci_bus 0000:04: resource 1 [mem 0xf2000000-0xf3ffffff]
[ 0.154450] pci_bus 0000:04: resource 2 [mem 0x80600000-0x807fffff pref]
[ 0.154452] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.154455] pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.154457] pci_bus 0000:05: resource 2 [mem 0x80800000-0x808fffff pref]
[ 0.154459] pci_bus 0000:05: resource 3 [io 0x0000-0xffff]
[ 0.154461] pci_bus 0000:05: resource 4 [mem 0x00000000-0xffffffffffffffff]
[ 0.154488] NET: Registered protocol family 2
[ 0.154595] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.155252] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.157043] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.157503] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.157505] TCP reno registered
[ 0.157515] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.157536] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.157659] NET: Registered protocol family 1
[ 0.157800] pci 0000:01:00.0: Boot video device
[ 0.157838] PCI: CLS 32 bytes, default 64
[ 0.157896] Unpacking initramfs...
[ 0.442570] Freeing initrd memory: 11157k freed
[ 0.448015] audit: initializing netlink socket (disabled)
[ 0.448033] type=2000 audit(1268047660.447:1): initialized
[ 0.448222] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.451207] VFS: Disk quotas dquot_6.5.2
[ 0.451284] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.451402] msgmni has been set to 4022
[ 0.451614] alg: No test for stdrng (krng)
[ 0.451719] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.451722] io scheduler noop registered
[ 0.451724] io scheduler deadline registered
[ 0.451907] io scheduler cfq registered (default)
[ 0.452025] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.452048] alloc irq_desc for 24 on node -1
[ 0.452050] alloc kstat_irqs on node -1
[ 0.452059] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.452174] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.452203] alloc irq_desc for 25 on node -1
[ 0.452205] alloc kstat_irqs on node -1
[ 0.452211] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.452370] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.452399] alloc irq_desc for 26 on node -1
[ 0.452401] alloc kstat_irqs on node -1
[ 0.452407] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 0.452567] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.452596] alloc irq_desc for 27 on node -1
[ 0.452598] alloc kstat_irqs on node -1
[ 0.452604] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
[ 0.456693] Linux agpgart interface v0.103
[ 0.456696] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.457379] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.457478] Fixed MDIO Bus: probed
[ 0.457576] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.457578] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.457721] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.457992] mice: PS/2 mouse device common for all mice
[ 0.458036] cpuidle: using governor ladder
[ 0.458039] cpuidle: using governor menu
[ 0.458279] TCP cubic registered
[ 0.458480] registered taskstats version 1
[ 0.458834] Initalizing network drop monitor service
[ 0.458864] Freeing unused kernel memory: 664k freed
[ 0.473371] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.684726] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.684733] ACPI: Power Button [PWRB]
[ 0.684827] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.684830] ACPI: Power Button [PWRF]
[ 0.685813] usbcore: registered new interface driver usbfs
[ 0.685847] usbcore: registered new interface driver hub
[ 0.685884] usbcore: registered new device driver usb
[ 0.698086] SCSI subsystem initialized
[ 0.698953] sky2 driver version 1.26
[ 0.698994] sky2 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.699009] sky2 0000:04:00.0: setting latency timer to 64
[ 0.699038] sky2 0000:04:00.0: Yukon-2 EC chip revision 2
[ 0.699118] alloc irq_desc for 28 on node -1
[ 0.699121] alloc kstat_irqs on node -1
[ 0.699136] sky2 0000:04:00.0: irq 28 for MSI/MSI-X
[ 0.699437] sky2 eth0: addr 00:16:e6:8c:6f:01
[ 0.715866] Floppy drive(s): fd0 is 1.44M
[ 0.717326] libata version 3.00 loaded.
[ 0.718432] 8139too Fast Ethernet driver 0.9.28
[ 0.718729] alloc irq_desc for 20 on node -1
[ 0.718731] alloc kstat_irqs on node -1
[ 0.718738] 8139too 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.719229] eth1: RealTek RTL8139 at 0xffffc90010b2c000, 00:50:fc:95:a1:c8, IRQ 20
[ 0.722124] ahci 0000:00:1f.2: version 3.0
[ 0.722142] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.722181] alloc irq_desc for 29 on node -1
[ 0.722183] alloc kstat_irqs on node -1
[ 0.722191] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 0.722234] ahci: SSS flag set, parallel bus scan disabled
[ 0.722263] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.722266] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems
[ 0.722271] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.724605] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 0.726754] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.727976] scsi0 : ahci
[ 0.728086] scsi1 : ahci
[ 0.728156] scsi2 : ahci
[ 0.728223] scsi3 : ahci
[ 0.728285] scsi4 : ahci
[ 0.728354] scsi5 : ahci
[ 0.728523] ata1: SATA max UDMA/133 abar m2048@0xf6106000 port 0xf6106100 irq 29
[ 0.728526] ata2: SATA max UDMA/133 abar m2048@0xf6106000 port 0xf6106180 irq 29
[ 0.728528] ata3: DUMMY
[ 0.728530] ata4: DUMMY
[ 0.728532] ata5: SATA max UDMA/133 abar m2048@0xf6106000 port 0xf6106300 irq 29
[ 0.728535] ata6: SATA max UDMA/133 abar m2048@0xf6106000 port 0xf6106380 irq 29
[ 0.728575] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.728579] alloc irq_desc for 18 on node -1
[ 0.728582] alloc kstat_irqs on node -1
[ 0.728590] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.728607] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.728612] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.728640] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.732549] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.732562] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf6105000
[ 0.735467] FDC 0 is a post-1991 82077
[ 0.738954] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.738960] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.738967] ahci 0000:03:00.0: setting latency timer to 64
[ 0.739129] scsi6 : ahci
[ 0.739205] scsi7 : ahci
[ 0.739299] ata7: SATA max UDMA/133 abar m8192@0xf6000000 port 0xf6000100 irq 19
[ 0.739303] ata8: SATA max UDMA/133 abar m8192@0xf6000000 port 0xf6000180 irq 19
[ 0.741860] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.741896] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.741899] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.741902] usb usb1: Product: EHCI Host Controller
[ 0.741905] usb usb1: Manufacturer: Linux 2.6.33-0.slh.5-sidux-amd64 ehci_hcd
[ 0.741907] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.742023] hub 1-0:1.0: USB hub found
[ 0.742028] hub 1-0:1.0: 4 ports detected
[ 0.742130] alloc irq_desc for 23 on node -1
[ 0.742132] alloc kstat_irqs on node -1
[ 0.742138] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.742157] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.742160] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.742168] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.746069] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.746082] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6104000
[ 0.755978] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.756003] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.756007] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.756009] usb usb2: Product: EHCI Host Controller
[ 0.756012] usb usb2: Manufacturer: Linux 2.6.33-0.slh.5-sidux-amd64 ehci_hcd
[ 0.756014] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.756109] hub 2-0:1.0: USB hub found
[ 0.756114] hub 2-0:1.0: 6 ports detected
[ 0.792247] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.792338] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.792348] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.792351] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.792363] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.792399] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d000
[ 0.792439] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.792442] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.792444] usb usb3: Product: UHCI Host Controller
[ 0.792446] usb usb3: Manufacturer: Linux 2.6.33-0.slh.5-sidux-amd64 uhci_hcd
[ 0.792448] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.792553] hub 3-0:1.0: USB hub found
[ 0.792558] hub 3-0:1.0: 2 ports detected
[ 0.792629] alloc irq_desc for 21 on node -1
[ 0.792632] alloc kstat_irqs on node -1
[ 0.792637] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.792643] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.792646] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.792653] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.792685] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c000
[ 0.792717] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.792720] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.792722] usb usb4: Product: UHCI Host Controller
[ 0.792724] usb usb4: Manufacturer: Linux 2.6.33-0.slh.5-sidux-amd64 uhci_hcd
[ 0.792726] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.792811] hub 4-0:1.0: USB hub found
[ 0.792815] hub 4-0:1.0: 2 ports detected
[ 0.792889] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.792894] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.792897] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.792907] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.792930] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
[ 0.792962] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.792965] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.792967] usb usb5: Product: UHCI Host Controller
[ 0.792969] usb usb5: Manufacturer: Linux 2.6.33-0.slh.5-sidux-amd64 uhci_hcd
[ 0.792971] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.793055] hub 5-0:1.0: USB hub found
[ 0.793059] hub 5-0:1.0: 2 ports detected
[ 0.793125] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.793130] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.793133] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.793140] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.793162] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.793194] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.793196] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.793198] usb usb6: Product: UHCI Host Controller
[ 0.793200] usb usb6: Manufacturer: Linux 2.6.33-0.slh.5-sidux-amd64 uhci_hcd
[ 0.793202] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.793286] hub 6-0:1.0: USB hub found
[ 0.793291] hub 6-0:1.0: 2 ports detected
[ 0.793355] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.793361] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.793364] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.793371] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.793392] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000cc00
[ 0.793424] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.793427] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.793429] usb usb7: Product: UHCI Host Controller
[ 0.793431] usb usb7: Manufacturer: Linux 2.6.33-0.slh.5-sidux-amd64 uhci_hcd
[ 0.793433] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.793521] hub 7-0:1.0: USB hub found
[ 0.793525] hub 7-0:1.0: 2 ports detected
[ 0.815878] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.815908] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.815966] scsi8 : pata_jmicron
[ 0.816047] scsi9 : pata_jmicron
[ 0.816731] ata9: PATA max UDMA/100 cmd 0x8000 ctl 0x8400 bmdma 0x9000 irq 16
[ 0.816734] ata10: PATA max UDMA/100 cmd 0x8800 ctl 0x8c00 bmdma 0x9008 irq 16
[ 0.970528] ata9.00: ATAPI: SAMSUNG DVD-ROM SD-616T, F303, max UDMA/33
[ 0.973554] ata9.00: configured for UDMA/33
[ 1.037057] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.044046] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.044076] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.055084] ata1.00: HPA detected: current 625140335, native 625142448
[ 1.055237] ata1.00: ATA-7: Hitachi HDT725032VLA360, V54OA52A, max UDMA/133
[ 1.055241] ata1.00: 625140335 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.056256] ata1.00: configured for UDMA/133
[ 1.067125] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 1.095118] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 1.210370] usb 2-5: New USB device found, idVendor=05e3, idProduct=0608
[ 1.210373] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.210376] usb 2-5: Product: USB2.0 Hub
[ 1.210741] hub 2-5:1.0: USB hub found
[ 1.210996] hub 2-5:1.0: 4 ports detected
[ 1.418157] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 1.581410] usb 3-2: New USB device found, idVendor=046d, idProduct=c045
[ 1.581413] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.581416] usb 3-2: Product: USB-PS/2 Optical Mouse
[ 1.581419] usb 3-2: Manufacturer: Logitech
[ 1.790041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.790761] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100, ATAPI AN
[ 1.791728] ata2.00: configured for UDMA/100
[ 1.802547] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB00 PQ: 0 ANSI: 5
[ 2.525039] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.539538] ata5.00: ATA-7: Hitachi HDT725032VLA360, V54OA7EA, max UDMA/133
[ 2.539541] ata5.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.540517] ata5.00: configured for UDMA/133
[ 2.551136] scsi 4:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 3.274037] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.300988] ata6.00: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 3.300991] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.340503] ata6.00: configured for UDMA/133
[ 3.351226] scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
[ 3.351820] scsi 8:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616T F303 PQ: 0 ANSI: 5
[ 3.538532] usbcore: registered new interface driver hiddev
[ 3.544546] sd 0:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 3.544604] sd 0:0:0:0: [sda] Write Protect is off
[ 3.544607] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.544632] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.544954] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.545180] Uniform CD-ROM driver Revision: 3.20
[ 3.545279] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.545418] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.545483] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.545487] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.545524] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.545654] sdb:
[ 3.545737] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.545790] sd 5:0:0:0: [sdc] Write Protect is off
[ 3.545793] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.545817] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.545940] sdc:sr1: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
[ 3.547186] sr 8:0:0:0: Attached scsi CD-ROM sr1
[ 3.552679] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input4
[ 3.552760] generic-usb 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0
[ 3.552805] usbcore: registered new interface driver usbhid
[ 3.552808] usbhid: USB HID core driver
[ 3.555502] sdc1
[ 3.555712] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 3.562289] sda1 sda2 sda3 sda4
[ 3.563564] sdb1 sdb2
[ 3.563905] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 3.571826] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.577470] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.577534] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.577851] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.578184] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 3.578542] sr 8:0:0:0: Attached scsi generic sg4 type 5
[ 3.819264] device-mapper: uevent: version 1.0.3
[ 3.819388] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
[ 3.889199] PM: Starting manual resume from disk
[ 3.917718] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 4.987666] udev: starting version 151
[ 5.111835] ACPI: SSDT 000000007fee8a00 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 5.299185] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.360359] udev: renamed network interface eth1 to eth0
[ 5.369364] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.394367] udev: renamed network interface eth0_rename to eth1
[ 5.474116] gameport: EMU10K1 is pci0000:05:01.1/gameport0, io 0xb800, speed 981kHz
[ 5.593607] Linux video capture interface: v2.00
[ 5.631670] rtc_cmos 00:03: RTC can wake from S4
[ 5.631740] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 5.631767] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 5.670600] [drm] Initialized drm 1.1.0 20060810
[ 5.708381] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 5.708441] saa7134 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.708448] saa7134[0]: found at 0000:05:02.0, rev: 1, irq: 18, latency: 32, mmio: 0xf5001000
[ 5.708455] saa7134[0]: subsystem: 1461:a70b, board: AverMedia M156 / Medion 2819 [card=22,autodetected]
[ 5.708487] saa7134[0]: board init: gpio is 400
[ 5.708556] input: saa7134 IR (AverMedia M156 / Me as /devices/pci0000:00/0000:00:1e.0/0000:05:02.0/input/input6
[ 5.708611] IRQ 18/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 5.852135] saa7134[0]: i2c eeprom 00: 61 14 0b a7 ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852147] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852156] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852165] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852174] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852182] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852191] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852200] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852209] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852217] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852226] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852235] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852243] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852252] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852261] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.852269] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.859947] [drm] radeon defaulting to kernel modesetting.
[ 5.859950] [drm] radeon kernel modesetting enabled.
[ 5.860024] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.860029] radeon 0000:01:00.0: setting latency timer to 64
[ 5.862394] [drm] radeon: Initializing kernel modesetting.
[ 5.862492] [drm] register mmio base: 0xF1000000
[ 5.862494] [drm] register mmio size: 65536
[ 5.862571] ATOM BIOS: RV730
[ 5.862588] [drm] Clocks initialized !
[ 5.863209] [drm] Detected VRAM RAM=256M, BAR=256M
[ 5.863213] [drm] RAM width 128bits DDR
[ 5.863270] [TTM] Zone kernel: Available graphics memory: 1030136 kiB.
[ 5.863288] [drm] radeon: 256M of VRAM memory ready
[ 5.863290] [drm] radeon: 512M of GTT memory ready.
[ 5.863332] alloc irq_desc for 30 on node -1
[ 5.863334] alloc kstat_irqs on node -1
[ 5.863343] radeon 0000:01:00.0: irq 30 for MSI/MSI-X
[ 5.863348] [drm] radeon: using MSI.
[ 5.863378] [drm] radeon: irq initialized.
[ 5.863381] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.863780] [drm] Loading RV730 Microcode
[ 5.863786] platform radeon_cp.0: firmware: requesting radeon/RV730_pfp.bin
[ 5.904138] alloc irq_desc for 22 on node -1
[ 5.904142] alloc kstat_irqs on node -1
[ 5.904149] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.904217] alloc irq_desc for 31 on node -1
[ 5.904220] alloc kstat_irqs on node -1
[ 5.904229] HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X
[ 5.904254] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.073088] tuner 1-0043: chip found @ 0x86 (saa7134[0])
[ 6.307775] tda9887 1-0043: creating new instance
[ 6.307778] tda9887 1-0043: tda988[5/6/7] found
[ 6.313070] tuner 1-0061: chip found @ 0xc2 (saa7134[0])
[ 6.315217] platform radeon_cp.0: firmware: requesting radeon/RV730_me.bin
[ 6.326367] platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin
[ 6.344034] tuner-simple 1-0061: creating new instance
[ 6.344038] tuner-simple 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
[ 6.369080] saa7134[0]: registered device video0 [v4l2]
[ 6.369112] saa7134[0]: registered device vbi0
[ 6.369139] saa7134[0]: registered device radio0
[ 6.369186] EMU10K1_Audigy 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.409300] [drm] ring test succeeded in 1 usecs
[ 6.409428] [drm] radeon: ib pool ready.
[ 6.409508] [drm] ib test succeeded in 0 usecs
[ 6.409608] [drm] Default TV standard: PAL
[ 6.409678] [drm] Radeon Display Connectors
[ 6.409680] [drm] Connector 0:
[ 6.409681] [drm] DVI-I
[ 6.409683] [drm] HPD2
[ 6.409685] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 6.409687] [drm] Encoders:
[ 6.409689] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 6.409690] [drm] DFP2: INTERNAL_UNIPHY1
[ 6.409692] [drm] Connector 1:
[ 6.409693] [drm] DIN
[ 6.409694] [drm] Encoders:
[ 6.409696] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 6.409697] [drm] Connector 2:
[ 6.409699] [drm] DVI-I
[ 6.409700] [drm] HPD1
[ 6.409702] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 6.409704] [drm] Encoders:
[ 6.409705] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.409707] [drm] DFP1: INTERNAL_UNIPHY
[ 6.478583] saa7134 ALSA driver for DMA sound loaded
[ 6.478596] IRQ 18/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 6.478618] saa7134[0]/alsa: saa7134[0] at 0xf5001000 irq 18 registered as card -1
[ 6.741563] [drm] fb mappable at 0xE0141000
[ 6.741566] [drm] vram apper at 0xE0000000
[ 6.741568] [drm] size 9216000
[ 6.741570] [drm] fb depth is 24
[ 6.741572] [drm] pitch is 7680
[ 6.751821] Console: switching to colour frame buffer device 240x75
[ 6.758721] fb0: radeondrmfb frame buffer device
[ 6.758723] registered panic notifier
[ 6.758728] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 6.758764] alloc irq_desc for 17 on node -1
[ 6.758766] alloc kstat_irqs on node -1
[ 6.758773] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.758812] alloc irq_desc for 32 on node -1
[ 6.758814] alloc kstat_irqs on node -1
[ 6.758822] HDA Intel 0000:01:00.1: irq 32 for MSI/MSI-X
[ 6.758845] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 7.151944] Adding 979956k swap on /dev/sda3. Priority:-1 extents:1 across:979956k
[ 47.015637] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 47.051366] EXT4-fs (sdc1): mounted filesystem with ordered data mode
[ 47.076646] EXT4-fs (dm-3): mounted filesystem with ordered data mode
[ 47.095550] EXT4-fs (dm-1): mounted filesystem with ordered data mode
[ 47.128192] EXT4-fs (dm-2): mounted filesystem with ordered data mode
[ 47.174345] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 48.174759] sky2 eth1: enabling interface
[ 48.455677] NET: Registered protocol family 10
[ 48.456081] lo: Disabled Privacy Extensions
[ 48.456441] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 48.845870] fuse init (API version 7.13)
[ 49.976591] sky2 eth1: Link is up at 100 Mbps, full duplex, flow control both
[ 49.976591] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 50.945905] lp: driver loaded but no devices found
[ 50.952358] ppdev: user-space parallel port driver
[ 51.692540] Bluetooth: Core ver 2.15
[ 51.692595] NET: Registered protocol family 31
[ 51.692598] Bluetooth: HCI device and connection manager initialized
[ 51.692601] Bluetooth: HCI socket layer initialized
[ 51.762949] Bluetooth: L2CAP ver 2.14
[ 51.762953] Bluetooth: L2CAP socket layer initialized
[ 51.767299] Bluetooth: RFCOMM TTY layer initialized
[ 51.767303] Bluetooth: RFCOMM socket layer initialized
[ 51.767305] Bluetooth: RFCOMM ver 1.11
[ 51.965963] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 51.965967] Bluetooth: BNEP filters: protocol multicast
[ 52.001956] Bridge firewalling registered
[ 52.130277] Bluetooth: SCO (Voice Link) ver 0.6
[ 52.130280] Bluetooth: SCO socket layer initialized
[ 60.382006] eth1: no IPv6 routers present
[ 172.885072] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold