rendered paste body [ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32myrinet (2.6.32) (root@gdx-208.orsay.grid5000.fr) (gcc version 4.4.3 20100108 (prerelease) (Debian 4.4.2-9) ) #1 SMP Fri Feb 12 14:14:08 CET 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32myrinet console=tty0 console=ttyS1,115200n8 root=/dev/sda3 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
[ 0.000000] BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff00000 (usable)
[ 0.000000] BIOS-e820: 00000000cff00000 - 00000000cff0c000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff0c000 - 00000000cff0d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cff0d000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x400000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff00000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] RAMDISK: 37873000 - 37fef840
[ 0.000000] ACPI: RSDP 00000000000f66d0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000cff05297 000A4 (v01 PTLTD ? XSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000cff0bc86 000F4 (v03 INTEL STOAKLEY 06040000 PTL 00000003)
[ 0.000000] ACPI: DSDT 00000000cff082a7 0396B (v01 Intel SEABURG 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000cff0cfc0 00040
[ 0.000000] ACPI: DMAR 00000000cff0bd7a 000D8 (v01 Intel OEMDMAR 06040000 LOHR 00000001)
[ 0.000000] ACPI: TCPA 00000000cff0be52 00032 (v01 Intel STOAKLEY 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 00000000cff0be84 000C8 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 00000000cff0bf4c 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000cff0bf88 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SPCR 00000000cff0bfb0 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000cff06bae 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000cff06b08 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000cff06a62 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000cff069bc 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000cff06916 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000cff06870 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000cff067ca 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000cff06724 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000cff0533b 013E9 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000019000 - 000000000001dfff]
[ 0.000000] bootmap [000000000001e000 - 0000000000063fff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00015ba494] TEXT DATA BSS ==> [0001000000 - 00015ba494]
[ 0.000000] #3 [0037873000 - 0037fef840] RAMDISK ==> [0037873000 - 0037fef840]
[ 0.000000] #4 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000]
[ 0.000000] #5 [00015bb000 - 00015bb1d0] BRK ==> [00015bb000 - 00015bb1d0]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #7 [0000014000 - 0000019000] PGTABLE ==> [0000014000 - 0000019000]
[ 0.000000] found SMP MP-table at [ffff8800000f6700] f6700
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x000cff00
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec89000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec89000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000cff0c000
[ 0.000000] PM: Registered nosave memory: 00000000cff0c000 - 00000000cff0d000
[ 0.000000] PM: Registered nosave memory: 00000000cff0d000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880028200000 s79576 r8192 d22824 u262144
[ 0.000000] pcpu-alloc: s79576 r8192 d22824 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065309
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32myrinet console=tty0 console=ttyS1,115200n8 root=/dev/sda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 8189692k/9175040k available (2746k kernel code, 787920k absent, 197428k reserved, 1697k data, 584k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS1] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2500.134 MHz processor.
[ 0.012006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.26 BogoMIPS (lpj=10000536)
[ 0.020038] Security Framework initialized
[ 0.024008] SELinux: Disabled at boot.
[ 0.028545] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.037689] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.041854] Mount-cache hash table entries: 256
[ 0.044134] Initializing cgroup subsys ns
[ 0.048005] Initializing cgroup subsys cpuacct
[ 0.052005] Initializing cgroup subsys devices
[ 0.056029] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.061729] CPU: L2 cache: 6144K
[ 0.064004] CPU 0/0x0 -> Node 0
[ 0.068003] CPU: Physical Processor ID: 0
[ 0.072002] CPU: Processor Core ID: 0
[ 0.076004] mce: CPU supports 6 MCE banks
[ 0.080008] CPU0: Thermal monitoring enabled (TM2)
[ 0.084005] using mwait in idle threads.
[ 0.088003] Performance Events: Core2 events, Intel PMU driver.
[ 0.095002] ... version: 2
[ 0.096003] ... bit width: 40
[ 0.100003] ... generic registers: 2
[ 0.104003] ... value mask: 000000ffffffffff
[ 0.108003] ... max period: 000000007fffffff
[ 0.112003] ... fixed-purpose events: 3
[ 0.116003] ... event mask: 0000000700000003
[ 0.124570] ACPI: Core revision 20090903
[ 0.136066] Setting APIC routing to flat
[ 0.140442] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.186388] CPU0: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
[ 0.196001] Booting processor 1 APIC 0x4 ip 0x6000
[ 0.016000] Initializing CPU#1
[ 0.016000] Calibrating delay using timer specific routine.. 5000.58 BogoMIPS (lpj=10001176)
[ 0.016000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.016000] CPU: L2 cache: 6144K
[ 0.016000] CPU 1/0x4 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 0
[ 0.016000] CPU1: Thermal monitoring enabled (TM2)
[ 0.284093] CPU1: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
[ 0.296005] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.300127] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.016000] Initializing CPU#2
[ 0.016000] Calibrating delay using timer specific routine.. 5000.56 BogoMIPS (lpj=10001129)
[ 0.016000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.016000] CPU: L2 cache: 6144K
[ 0.016000] CPU 2/0x1 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 1
[ 0.016000] CPU2: Thermal monitoring enabled (TM2)
[ 0.392122] CPU2: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
[ 0.401301] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.404199] Booting processor 3 APIC 0x5 ip 0x6000
[ 0.016000] Initializing CPU#3
[ 0.016000] Calibrating delay using timer specific routine.. 5000.57 BogoMIPS (lpj=10001158)
[ 0.016000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.016000] CPU: L2 cache: 6144K
[ 0.016000] CPU 3/0x5 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 1
[ 0.016000] CPU3: Thermal monitoring enabled (TM2)
[ 0.500091] CPU3: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
[ 0.509294] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.512130] Booting processor 4 APIC 0x2 ip 0x6000
[ 0.016000] Initializing CPU#4
[ 0.016000] Calibrating delay using timer specific routine.. 5000.55 BogoMIPS (lpj=10001102)
[ 0.016000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.016000] CPU: L2 cache: 6144K
[ 0.016000] CPU 4/0x2 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 2
[ 0.016000] CPU4: Thermal monitoring enabled (TM2)
[ 0.608095] CPU4: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
[ 0.617300] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.620132] Booting processor 5 APIC 0x6 ip 0x6000
[ 0.016000] Initializing CPU#5
[ 0.016000] Calibrating delay using timer specific routine.. 5000.57 BogoMIPS (lpj=10001149)
[ 0.016000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.016000] CPU: L2 cache: 6144K
[ 0.016000] CPU 5/0x6 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 2
[ 0.016000] CPU5: Thermal monitoring enabled (TM2)
[ 0.716091] CPU5: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
[ 0.725294] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.728130] Booting processor 6 APIC 0x3 ip 0x6000
[ 0.016000] Initializing CPU#6
[ 0.016000] Calibrating delay using timer specific routine.. 5000.54 BogoMIPS (lpj=10001091)
[ 0.016000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.016000] CPU: L2 cache: 6144K
[ 0.016000] CPU 6/0x3 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 3
[ 0.016000] CPU6: Thermal monitoring enabled (TM2)
[ 0.824094] CPU6: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
[ 0.833301] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.836135] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.016000] Initializing CPU#7
[ 0.016000] Calibrating delay using timer specific routine.. 5000.57 BogoMIPS (lpj=10001150)
[ 0.016000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.016000] CPU: L2 cache: 6144K
[ 0.016000] CPU 7/0x7 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 3
[ 0.016000] CPU7: Thermal monitoring enabled (TM2)
[ 0.932116] CPU7: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 06
[ 0.941301] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.944057] Brought up 8 CPUs
[ 0.948004] Total of 8 processors activated (40004.24 BogoMIPS).
[ 0.956625] NET: Registered protocol family 16
[ 0.960056] ACPI: bus type pci registered
[ 0.964051] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7
[ 0.968005] PCI: MCFG area at e0000000 reserved in E820
[ 0.972196] PCI: Using MMCONFIG at e0000000 - e07fffff
[ 0.976004] PCI: Using configuration type 1 for base access
[ 0.984125] bio: create slab <bio-0> at 0
[ 0.990491] ACPI: Interpreter enabled
[ 0.992007] ACPI: (supports S0 S1 S4 S5)
[ 0.997326] ACPI: Using IOAPIC for interrupt routing
[ 1.004368] ACPI: No dock devices found.
[ 1.008890] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.012057] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.016006] pci 0000:00:00.0: PME# disabled
[ 1.020049] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.024005] pci 0000:00:01.0: PME# disabled
[ 1.028047] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.032005] pci 0000:00:05.0: PME# disabled
[ 1.036046] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.040005] pci 0000:00:07.0: PME# disabled
[ 1.044496] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.048007] pci 0000:00:1d.7: PME# disabled
[ 1.052176] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.056005] pci 0000:00:1f.2: PME# disabled
[ 1.060456] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.064006] pci 0000:02:00.0: PME# disabled
[ 1.068050] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
[ 1.072005] pci 0000:02:00.3: PME# disabled
[ 1.076094] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.080006] pci 0000:03:00.0: PME# disabled
[ 1.084057] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
[ 1.088005] pci 0000:03:02.0: PME# disabled
[ 1.092173] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 1.096006] pci 0000:05:00.0: PME# disabled
[ 1.100104] pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
[ 1.104006] pci 0000:05:00.1: PME# disabled
[ 1.108268] pci 0000:00:1e.0: transparent bridge
[ 1.120295] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.127038] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.134811] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.142326] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.149868] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.157470] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 *5 6 7 10 11 14 15)
[ 1.165132] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15)
[ 1.172473] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 *11 14 15)
[ 1.180053] vgaarb: device added: PCI:0000:08:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.184005] vgaarb: loaded
[ 1.186816] usbcore: registered new interface driver usbfs
[ 1.188039] usbcore: registered new interface driver hub
[ 1.192038] usbcore: registered new device driver usb
[ 1.196048] PCI: Using ACPI for IRQ routing
[ 1.200149] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.204008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.212587] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.240008] Switching to clocksource tsc
[ 1.245467] pnp: PnP ACPI init
[ 1.248613] ACPI: bus type pnp registered
[ 1.255649] pnp: PnP ACPI: found 9 devices
[ 1.260196] ACPI: ACPI bus type pnp unregistered
[ 1.264887] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 1.271310] system 00:01: ioport range 0x295-0x296 has been reserved
[ 1.277731] system 00:01: ioport range 0xca2-0xca3 has been reserved
[ 1.284153] system 00:01: ioport range 0xca8-0xcaf has been reserved
[ 1.290576] system 00:01: ioport range 0x800-0x80f has been reserved
[ 1.296997] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 1.303593] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 1.310198] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 1.316792] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.323996] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 1.331559] system 00:01: iomem range 0xfec89000-0xfec89fff could not be reserved
[ 1.339125] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.346329] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved
[ 1.353530] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved
[ 1.360734] system 00:01: iomem range 0xfed20000-0xfed44fff has been reserved
[ 1.367944] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 1.380386] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.386374] pci 0000:00:01.0: IO window: disabled
[ 1.391323] pci 0000:00:01.0: MEM window: 0xd8800000-0xd89fffff
[ 1.397487] pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000d87fffff
[ 1.405139] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[ 1.411127] pci 0000:03:00.0: IO window: disabled
[ 1.416074] pci 0000:03:00.0: MEM window: disabled
[ 1.421109] pci 0000:03:00.0: PREFETCH window: disabled
[ 1.426581] pci 0000:03:02.0: PCI bridge, secondary bus 0000:05
[ 1.432566] pci 0000:03:02.0: IO window: 0x2000-0x2fff
[ 1.437949] pci 0000:03:02.0: MEM window: 0xd8a00000-0xd8afffff
[ 1.444113] pci 0000:03:02.0: PREFETCH window: 0xd8d00000-0xd8dfffff
[ 1.450708] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 1.456696] pci 0000:02:00.0: IO window: 0x2000-0x2fff
[ 1.462078] pci 0000:02:00.0: MEM window: 0xd8a00000-0xd8afffff
[ 1.468240] pci 0000:02:00.0: PREFETCH window: 0xd8d00000-0xd8dfffff
[ 1.474837] pci 0000:02:00.3: PCI bridge, secondary bus 0000:06
[ 1.480820] pci 0000:02:00.3: IO window: disabled
[ 1.485762] pci 0000:02:00.3: MEM window: disabled
[ 1.490798] pci 0000:02:00.3: PREFETCH window: disabled
[ 1.496266] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
[ 1.502264] pci 0000:00:05.0: IO window: 0x2000-0x2fff
[ 1.513997] pci 0000:00:05.0: MEM window: 0xd8a00000-0xd8bfffff
[ 1.520542] pci 0000:00:05.0: PREFETCH window: 0xd8d00000-0xd8dfffff
[ 1.527137] pci 0000:00:07.0: PCI bridge, secondary bus 0000:07
[ 1.533125] pci 0000:00:07.0: IO window: disabled
[ 1.538071] pci 0000:00:07.0: MEM window: disabled
[ 1.543099] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.548567] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[ 1.554559] pci 0000:00:1e.0: IO window: 0x3000-0x3fff
[ 1.559964] pci 0000:00:1e.0: MEM window: 0xd8c00000-0xd8cfffff
[ 1.566128] pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 1.573793] pci 0000:00:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 1.580566] pci 0000:00:05.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 1.587344] pci 0000:02:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 1.594119] pci 0000:03:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 1.600901] pci 0000:03:02.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
[ 1.607685] pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 1.614630] NET: Registered protocol family 2
[ 1.619318] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.627783] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.638730] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.645968] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.652646] TCP reno registered
[ 1.656061] NET: Registered protocol family 1
[ 1.660657] Trying to unpack rootfs image as initramfs...
[ 1.814498] Freeing initrd memory: 7666k freed
[ 1.821740] Simple Boot Flag at 0x41 set to 0x80
[ 1.829792] audit: initializing netlink socket (disabled)
[ 1.835292] type=2000 audit(1267439566.834:1): initialized
[ 1.841654] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.848503] VFS: Disk quotas dquot_6.5.2
[ 1.852542] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.859118] msgmni has been set to 16010
[ 1.863507] alg: No test for stdrng (krng)
[ 1.867750] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.875227] io scheduler noop registered
[ 1.879218] io scheduler anticipatory registered
[ 1.883898] io scheduler deadline registered
[ 1.888267] io scheduler cfq registered (default)
[ 1.899192] Linux agpgart interface v0.103
[ 1.903355] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.909824] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.916083] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.922635] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.928488] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.936799] brd: module loaded
[ 1.940035] input: Macintosh mouse button emulation as /class/input/input0
[ 1.947341] PNP: No PS/2 controller found. Probing ports directly.
[ 1.955928] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.960975] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.966434] mice: PS/2 mouse device common for all mice
[ 1.971803] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 1.978766] rtc_cmos 00:04: RTC can wake from S4
[ 1.983543] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.989724] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.996644] cpuidle: using governor ladder
[ 2.000811] cpuidle: using governor menu
[ 2.004800] No iBFT detected.
[ 2.008124] TCP cubic registered
[ 2.011418] NET: Registered protocol family 17
[ 2.016146] registered taskstats version 1
[ 2.020762] rtc_cmos 00:04: setting system clock to 2010-03-01 10:32:49 UTC (1267439569)
[ 2.028991] Freeing unused kernel memory: 584k freed
Loading, please wait...
Begin: Loading essential drivers ... [ 2.109779] Uniform Multi-Platform E-IDE driver
[ 2.117865] ide-gd driver 1.18
[ 2.122416] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 2.135258] ide0: no devices on the port
[ 2.139338] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.147025] ide1: no devices on the port
[ 2.151117] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.166942] SCSI subsystem initialized
[ 2.175284] Fusion MPT base driver 3.04.12
[ 2.179464] Copyright (c) 1999-2008 LSI Corporation
[ 2.189288] Fusion MPT SPI Host driver 3.04.12
[ 2.221923] Fusion MPT SAS Host driver 3.04.12
[ 2.228927] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 2.237875] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.245113] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.404084] scsi0 : ata_piix
[ 2.407212] scsi1 : ata_piix
[ 2.410243] ata1: SATA max UDMA/133 cmd 0x1880 ctl 0x1874 bmdma 0x1860 irq 17
[ 2.417467] ata2: SATA max UDMA/133 cmd 0x1878 ctl 0x1870 bmdma 0x1868 irq 17
[ 2.605427] ata1.00: ATA-7: WDC WD1600YS-01SHB1, 20.06C06, max UDMA/133
[ 2.612126] ata1.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.624683] ata1.00: configured for UDMA/133
[ 2.629150] scsi 0:0:0:0: Direct-Access ATA WDC WD1600YS-01S 20.0 PQ: 0 ANSI: 5
[ 2.640908] HP CISS Driver (v 3.6.20)
[ 2.648265] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 2.654304] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 2.660274] e1000e 0000:05:00.0: PCI INT A -> GSIuct: UHCI Host Controller
[ 3.196755] usb usb2: Manufacturer: Linux 2.6.32myrinet uhci_hcd
[ 3.202859] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.207620] usb usb2: configuration #1 chosen from 1 choice
[ 3.213307] hub 2-0:1.0: USB hub found
[ 3.217134] hub 2-0:1.0: 2 ports detected
[ 3.221284] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.228520] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.233858] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.241420] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
[ 3.247268] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.254148] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.261468] usb usb3: Product: UHCI Host Controller
[ 3.266424] usb usb3: Manufacturer: Linux 2.6.32myrinet uhci_hcd
[ 3.272502] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.277241] usb usb3: configuration #1 chosen from 1 choice
[ 3.282931] hub 3-0:1.0: USB hub found
[ 3.286760] hub 3-0:1.0: 2 ports detected
[ 3.290909] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 3.298163] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.303506] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.311032] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
[ 3.316883] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.323769] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.331095] usb usb4: Product: UHCI Host Controller
[ 3.336051] usb usb4: Manufacturer: Linux 2.6.32myrinet uhci_hcd
[ 3.342136] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.346859] usb usb4: configuration #1 chosen from 1 choice
[ 3.352544] hub 4-0:1.0: USB hub found
[ 3.356385] hub 4-0:1.0: 2 ports detected
[ 3.576015] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 3.712847] usb 1-6: New USB device found, idVendor=14dd, idProduct=0002
[ 3.719666] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.726894] usb 1-6: Product: Multidevice
[ 3.730983] usb 1-6: Manufacturer: Peppercon AG
[ 3.735594] usb 1-6: SerialNumber: 0513be016c46dfacDC636CEBF88C7E48
[ 3.742004] usb 1-6: configuration #1 chosen from 1 choice
[ 3.754839] usbcore: registered new interface driver hiddev
[ 3.761295] input: Peppercon AG Multidevice as /class/input/input3
[ 3.767626] generic-usb 0003:14DD:0002.0001: input,hidraw0: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:1d.7-6/input0
[ 3.780687] input: Peppercon AG Multidevice as /class/input/input4
[ 3.787031] generic-usb 0003:14DD:0002.0002: input,hidraw1: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:1d.7-6/input1
[ 3.799658] usbcore: registered new interface driver usbhid
[ 3.805310] usbhid: v2.6:USB HID core driver
[ 4.558719] mlx4_core 0000:01:00.0: Requested number of MACs is too much for port 1, reducing to 1.
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.[ 5.051752] PM: Starting manual resume from disk
Begin: Running /scripts/local-premount ... kinit: name_to_dev_t(/dev/sda1) = sda1(8,1)
kinit: trying to resume from /dev/sda1
kinit: No resume image, doing normal boot...
done.
[ 5.074373] kjournald starting. Commit interval 5 seconds
[ 5.079954] EXT3-fs: mounted filesystem with writeback data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd[ 5.745082] udev: starting version 150
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 5.938463] ACPI: SSDT 00000000cff076c8 001DD (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 5.947136] ACPI Error (psargs-0359): [\_SB_.BCMD] Namespace lookup failure, AE_NOT_FOUND
[ 5.955569] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0._OSC] (Node ffff88022f075750), AE_NOT_FOUND
[ 5.967199] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0._PDC] (Node ffff88022f075770), AE_NOT_FOUND
[ 5.980756] processor LNXCPU:00: registered as cooling_device0
[ 5.987441] ACPI: SSDT 00000000cff078a5 0016E (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 5.996274] ACPI: SSDT 00000000cff07325 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 6.005710] ACPI Error (psargs-0359): [\_PR_.CPU0._CST] Namespace lookup failure, AE_NOT_FOUND
[ 6.014666] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._CST] (Node ffff88022f075e50), AE_NOT_FOUND
[ 6.026252] processor LNXCPU:01: registered as cooling_device1
[ 6.032708] ACPI: SSDT 00000000cff07a13 0016E (v01 PmRef Cpu2Ist 00003000 INTL 20050228)
[ 6.041537] ACPI: SSDT 00000000cff073aa 00085 (v01 PmRef Cpu2Cst 00003000 INTL 20050228)
[ 6.050644] ACPI Error (psargs-0359): [\_PR_.CPU0._CST] Namespace lookup failure, AE_NOT_FOUND
[ 6.059541] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._CST] (Node ffff88022dbf8770), AE_NOT_FOUND
[ 6.071091] processor LNXCPU:02: registered as cooling_device2
[ 6.077563] ACPI: SSDT 00000000cff07b81 0016E (v01 PmRef Cpu3Ist 00003000 INTL 20050228)
[ 6.086398] ACPI: SSDT 00000000cff0742f 00085 (v01 PmRef Cpu3Cst 00003000 INTL 20050228)
[ 6.095564] ACPI Error (psargs-0359): [\_PR_.CPU0._CST] Namespace lookup failure, AE_NOT_FOUND
[ 6.104486] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU3._CST] (Node ffff88022dbf8ef0), AE_NOT_FOUND
[ 6.116217] processor LNXCPU:03: registered as cooling_device3
[ 6.122717] ACPI: SSDT 00000000cff07cef 0016E (v01 PmRef CPU4Ist 00003000 INTL 20050228)
[ 6.131531] ACPI: SSDT 00000000cff074b4 00085 (v01 PmRef CPU4Cst 00003000 INTL 20050228)
[ 6.140715] ACPI Error (psargs-0359): [\_PR_.CPU0._CST] Namespace lookup failure, AE_NOT_FOUND
[ 6.149586] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU4._CST] (Node ffff88022f075310), AE_NOT_FOUND
[ 6.161191] processor LNXCPU:04: registered as cooling_device4
[ 6.167723] ACPI: SSDT 00000000cff07e5d 0016E (v01 PmRef CPU5Ist 00003000 INTL 20050228)
[ 6.176621] ACPI: SSDT 00000000cff07539 00085 (v01 PmRef CPU5Cst 00003000 INTL 20050228)
[ 6.185815] ACPI Error (psargs-0359): [\_PR_.CPU0._CST] Namespace lookup failure, AE_NOT_FOUND
[ 6.194768] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU5._CST] (Node ffff88022d97ca70), AE_NOT_FOUND
[ 6.206359] processor LNXCPU:05: registered as cooling_device5
[ 6.212935] ACPI: SSDT 00000000cff07fcb 0016E (v01 PmRef Cpu6Ist 00003000 INTL 20050228)
[ 6.221742] ACPI: SSDT 00000000cff075be 00085 (v01 PmRef CPU6Cst 00003000 INTL 20050228)
[ 6.230966] ACPI Error (psargs-0359): [\_PR_.CPU0._CST]
[ 6.235313] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.235712] input: PC Speaker as /class/input/input5
[ 6.239563] dca service started, version 1.12.1
[ 6.251851] Namespace lookup failure, AE_NOT_FOUND
[ 6.252977] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.253654] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.271083] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU6._CST] (Node ffff88022f31e9f0), AE_NOT_FOUND
[ 6.282652] processor LNXCPU:06: registered as cooling_device6
[ 6.288613] intel_rng: FWH not detected
[ 6.293027] ACPI:
[ 6.293734] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 6.301113] SSDT 00000000cff08139 0016E (v01 PmRef Cpu7Ist 00003000 INTL 20050228)
[ 6.301128] ioatdma 0000:00:0f.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
[ 6.316165]
[ 6.316169] ioatdma 0000:00:0f.0: channel enumeration error
[ 6.316173] ioatdma 0000:00:0f.0: Intel(R) I/OAT DMA Engine init failed
[ 6.316177] ioatdma 0000:00:0f.0: PCI INT A disabled
[ 6.336552] ACPI: SSDT 00000000cff07643 00085 (v01 PmRef Cpu7Cst 00003000 INTL 20050228)
[ 6.345696] ACPI Error (psargs-0359): [\_PR_.CPU0._CST] Namespace lookup failure, AE_NOT_FOUND
[ 6.354584] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU7._CST] (Node ffff88022bb97310), AE_NOT_FOUND
[ 6.36619Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
ib1: unknown hardware address type 32
ib0:[ 10.299939] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPNAK from 172.16.16.247
Stopping NTP server: ntpd.
Starting NTP server: ntpd.
Stopping NTP server: ntpd.
[ 17.837079] NET: Registered protocol family 10
[ 17.842124] lo: Disabled Privacy Extensions
Starting NTP server: ntpd.
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
done.
Cleaning up temporary files....
Setting console screen modes and fonts.
cannot (un)set powersave mode
INIT: Entering runlevel: 2
Loading cpufreq kernel modules...done (acpi-cpufreq).
Starting system log daemon....
Starting kernel log daemon....
Starting ACPI services....
Starting OpenBSD Secure Shell server: sshd.
Starting CPU Frequency daemon: cpufreqd.
CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...CPU1...CPU2...CPU3...CPU4...CPU5...CPU6...CPU7...done.
Creating mx devices
Installing init script
cp: `/usr/local/sbin/mx_start_stop' and `/etc/init.d/mx' are the same file
Loading mx driver
[ 49.767825] mx_mcp: module license 'Myricom' taints kernel.
[ 49.773484] Disabling lock debugging due to kernel taint
[ 50.042687] mx INFO: On x86_64, kernel version: 2.6.32myrinet #1 SMP Fri Feb 12 14:14:08 CET 2010
[ 50.051734] mx INFO: Memory available for registration: 1793295 pages (7005 MBytes)
[ 50.059578] mx INFO: Version 1.2.11
[ 50.063201] mx INFO: Build root@gdx-208.orsay.grid5000.fr:/root/mx-1.2.11 Fri Feb 12 15:27:23 CET 2010
[ 50.072714] mx INFO: Debug OFF
[ 50.076113] mx INFO: 0 Myrinet boards found and initialized
Creating mx devices
myri0: ERROR while getting interface flags: No such device
Starting Name Service Cache Daemon: nscd.
Not starting internet superserver: no services enabled.
Starting NTP server: ntpd.
Starting periodic command scheduler: cron.