Console> (enable) set vlan 3 pvlan-type ?
community Set private vlan as community vlan
isolated Set private vlan as isolated vlan
none Set vlan to be a normal vlan
primary Set private vlan as primary vlan
twoway-community Set private vlan as twoway community vlan
Console> (enable) set vlan 3 pvlan-type primary ?
aremaxhop Set Tokenring vlan ARE max hop
backupcrf Set Tokenring backupcrf vlan
bridge Set vlan bridge
decring Set vlan ring (decimal number)
mistp-instance Set a vlan for an MISTP instance
mode Set vlan mode
mtu Set vlan MTU
name Set vlan name
parent Set vlan parent
pvlan-type Set private vlan type
ring Set vlan ring (hex number)
said Set vlan said
state Set vlan state
stemaxhop Set Tokenring vlan STE max hop
stp Set vlan STP
translation Set vlan translation
type Set vlan type
<cr>
Console> (enable) set vlan 3 pvlan-type primary
VTP advertisements transmitting temporarily stopped,
and will resume after the command finishes.
Usage: set vlan <vlan_num> [name <name>] [type <type>] [state <state>]
[pvlan-type <pvlan_type>]
[said <said>] [mtu <mtu>] [ring <hex_ring_number>]
[decring <decimal_ring_number>]
[bridge <bridge_number>] [parent <vlan_num>]
[mode <bridge_mode>] [stp <stp_type>]
[translation <vlan_num>] [backupcrf <off|on>]
[aremaxhop <hopcount>] [stemaxhop <hopcount>]
(name = 1..32 characters, state = (active, suspend)
type = (ethernet, fddi, fddinet, trcrf, trbrf)
said = 1..4294967294, mtu = 576..18190
pvlan-type = (primary,isolated,community,twoway-community,none)
hex_ring_number = 0x1..0xfff, decimal_ring_number = 1..4095
bridge_number = 0x1..0xf, parent = 2..1005, mode = (srt, srb)
stp = (ieee, ibm, auto), translation = 1..1005
hopcount = 1..13)
Console> (enable)