rendered paste bodySalida del lspci
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0f.0 IDE interface: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 70)
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
00:13.0 PCI bridge: VIA Technologies, Inc. VT8251 Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01)
02:00.0 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
02:00.1 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
05:0c.0 Ethernet controller: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY (rev 31)
Salida del dmesg
[ 0.000000] Bootdata ok (command line is BOOT_IMAGE=/install/vmlinuz rescue/enable=true initrd=/install/initrd.gz ramdisk_size=16384 root=/dev/ram rw --)
[ 0.000000] Linux version 2.6.15-26-amd64-generic (buildd@king) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Aug 3 02:52:35 UTC 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
[ 0.000000] BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fac60
[ 0.000000] ACPI: XSDT (v001 A M I OEMXSDT 0x11000509 MSFT 0x00000097) @ 0x000000003bfb0100
[ 0.000000] ACPI: FADT (v003 A M I OEMFACP 0x11000509 MSFT 0x00000097) @ 0x000000003bfb0290
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x11000509 MSFT 0x00000097) @ 0x000000003bfb0390
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x11000509 MSFT 0x00000097) @ 0x000000003bfbe040
[ 0.000000] ACPI: DSDT (v001 A0347 A0347001 0x00000001 INTL 0x02002026) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003bfb0000
[ 0.000000] Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003bfb0000
[ 0.000000] On node 0 totalpages: 241297
[ 0.000000] DMA zone: 3015 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 238282 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages, LIFO batch:0
[ 0.000000] HighMem zone: 0 pages, LIFO batch:0
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3c000000:a4000000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ dc000000 size 64 MB
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: BOOT_IMAGE=/install/vmlinuz rescue/enable=true initrd=/install/initrd.gz ramdisk_size=16384 root=/dev/ram rw --
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes)
[ 0.000000] time.c: Using 3.579545 MHz PM timer.
[ 0.000000] time.c: Detected 2000.148 MHz processor.
[ 22.857871] Console: colour VGA+ 80x25
[ 22.860625] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 22.861692] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 22.871700] Memory: 958904k/982720k available (2150k kernel code, 23428k reserved, 757k data, 180k init)
[ 22.950113] Calibrating delay using timer specific routine.. 4007.28 BogoMIPS (lpj=8014574)
[ 22.950276] Security Framework v1.0.0 initialized
[ 22.950338] SELinux: Disabled at boot.
[ 22.950413] Mount-cache hash table entries: 256
[ 22.950596] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 22.950656] CPU: L2 Cache: 512K (64 bytes/line)
[ 22.950712] CPU 0(1) -> Node 0 -> Core 0
[ 22.950773] mtrr: v2.0 (20020519)
[ 22.950833] SMP alternatives: switching to UP code
[ 22.951219] checking if image is initramfs... it is
[ 23.317513] Freeing initrd memory: 4492k freed
[ 23.321282] ACPI: Looking for DSDT ... not found!
[ 23.321803] ACPI-0312: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43005350
[ 23.321922] ACPI-0312: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43005350
[ 23.322897] ACPI-0312: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43005350
[ 23.323015] ACPI-0312: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43005350
[ 23.364126] Using local APIC timer interrupts.
[ 23.414085] Detected 12.500 MHz APIC timer.
[ 23.414212] Brought up 1 CPUs
[ 23.414300] time.c: Using PIT/TSC based timekeeping.
[ 23.414356] testing NMI watchdog ... OK.
[ 23.454725] NET: Registered protocol family 16
[ 23.454807] ACPI: bus type pci registered
[ 23.454867] PCI: Using configuration type 1
[ 23.455366] ACPI: Subsystem revision 20051216
[ 23.459801] ACPI: Interpreter enabled
[ 23.459858] ACPI: Using IOAPIC for interrupt routing
[ 23.460845] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 23.460903] PCI: Probing PCI hardware (bus 00)
[ 23.464050] Boot video device is 0000:01:00.0
[ 23.464457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 23.483596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 23.487701] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 23.487817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT]
[ 23.488059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT]
[ 23.488301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 23.490418] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 23.491160] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 23.491896] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 23.492632] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 23.493381] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 23.494214] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 23.495043] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 23.495869] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 23.496559] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 23.496624] pnp: PnP ACPI init
[ 23.500757] pnp: PnP ACPI: found 15 devices
[ 23.500828] PCI: Using ACPI for IRQ routing
[ 23.500885] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 23.501095] agpgart: Detected AGP bridge 0
[ 23.503545] agpgart: AGP aperture is 64M @ 0xdc000000
[ 23.503620] PCI-DMA: Disabling IOMMU.
[ 23.504328] pnp: 00:06: ioport range 0x290-0x297 has been reserved
[ 23.504561] PCI: Bridge: 0000:00:01.0
[ 23.504616] IO window: disabled.
[ 23.504673] MEM window: fc900000-fe9fffff
[ 23.504730] PREFETCH window: cff00000-d7efffff
[ 23.504788] PCI: Bridge: 0000:02:00.0
[ 23.504842] IO window: disabled.
[ 23.504898] MEM window: disabled.
[ 23.504953] PREFETCH window: disabled.
[ 23.505009] PCI: Bridge: 0000:02:00.1
[ 23.505063] IO window: disabled.
[ 23.505133] MEM window: disabled.
[ 23.505188] PREFETCH window: disabled.
[ 23.505244] PCI: Bridge: 0000:00:13.0
[ 23.505298] IO window: disabled.
[ 23.505353] MEM window: disabled.
[ 23.505408] PREFETCH window: disabled.
[ 23.505466] PCI: Bridge: 0000:00:13.1
[ 23.505520] IO window: c000-cfff
[ 23.505577] MEM window: fea00000-feafffff
[ 23.505633] PREFETCH window: disabled.
[ 23.505701] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 23.505708] PCI: Setting latency timer of device 0000:00:13.0 to 64
[ 23.505721] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 23.505732] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 23.505739] PCI: Setting latency timer of device 0000:00:13.1 to 64
[ 23.505943] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[ 23.506280] audit: initializing netlink socket (disabled)
[ 23.506346] audit(1158934029.648:1): initialized
[ 23.506520] VFS: Disk quotas dquot_6.5.1
[ 23.506591] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 23.506693] Initializing Cryptographic API
[ 23.506749] io scheduler noop registered
[ 23.506848] io scheduler anticipatory registered
[ 23.506947] io scheduler deadline registered
[ 23.507053] io scheduler cfq registered
[ 23.507544] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 23.507549] pcie_portdrv_probe->Dev[287c:1106] has invalid IRQ. Check vendor BIOS
[ 23.507646] assign_interrupt_mode Found MSI capability
[ 23.507753] Allocate Port Service[pcie00]
[ 23.507791] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 23.507794] pcie_portdrv_probe->Dev[287d:1106] has invalid IRQ. Check vendor BIOS
[ 23.507887] assign_interrupt_mode Found MSI capability
[ 23.507977] Allocate Port Service[pcie00]
[ 23.519876] Real Time Clock Driver v1.12
[ 23.519972] Linux agpgart interface v0.101 (c) Dave Jones
[ 23.520120] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 23.520367] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 23.520465] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.520552] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[ 23.520724] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.522616] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.523041] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
[ 23.523151] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 23.523211] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 23.523508] mice: PS/2 mouse device common for all mice
[ 23.523677] NET: Registered protocol family 2
[ 23.553513] input: AT Translated Set 2 keyboard as /class/input/input0
[ 23.561934] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 23.562236] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 23.563789] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 23.564504] TCP: Hash tables configured (established 131072 bind 65536)
[ 23.564565] TCP reno registered
[ 23.564704] TCP bic registered
[ 23.564764] NET: Registered protocol family 1
[ 23.564825] NET: Registered protocol family 8
[ 23.564880] NET: Registered protocol family 20
[ 23.565101] ACPI wakeup devices:
[ 23.565155] PCI0 PS2K PS2M UAR1 P7P8 P0PA USB1 USB2 USB3 USB4 EHCI ILAN SLPB PWRB
[ 23.565784] ACPI: (supports S0 S1 S3 S4 S5)
[ 23.566132] Freeing unused kernel memory: 180k freed
[ 23.894127] SCSI subsystem initialized
[ 23.895514] ACPI: bus type scsi registered
[ 23.895572] libata version 1.20 loaded.
[ 23.896507] sata_via 0000:00:0f.0: version 1.1
[ 23.896527] GSI 16 sharing vector 0xC1 and IRQ 16
[ 23.896584] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 193
[ 23.896702] ConfigSpace offset 49H: 0xa0
[ 23.896762] sata_via 0000:00:0f.0: routed to hard irq line 10