root

smartctl 5.39.1 2010-01-28 r3054 [i586-mandriva-linux-gnu] (local build)Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net=== START OF INFORMATION SECTION ===Model Family:     Seagate Momentus 4200.2 seriesDevice Model:     ST9808210ASerial Number:    3LF062NGFirmware Version: 3.00User Capacity:    80 026 361 856 bytesDevice is:        In smartctl database [for details use: -P show]ATA Version is:   6ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2Local Time is:    Tue Feb 16 16:33:50 2010 CETSMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:Offline data collection status:  (0x82)	Offline data collection activity					was completed without error.					Auto Offline Data Collection: Enabled.Self-test execution status:      (   0)	The previous self-test routine completed					without error or no self-test has ever 					been run.Total time to complete Offline data collection: 		 ( 426) seconds.Offline data collectioncapabilities: 			 (0x5b) SMART execute Offline immediate.					Auto Offline data collection on/off support.					Suspend Offline collection upon new					command.					Offline surface scan supported.					Self-test supported.					No Conveyance Self-test supported.					Selective Self-test supported.SMART capabilities:            (0x0003)	Saves SMART data before entering					power-saving mode.					Supports SMART auto save timer.Error logging capability:        (0x01)	Error logging supported.					No General Purpose Logging support.Short self-test routine recommended polling time: 	 (   1) minutes.Extended self-test routinerecommended polling time: 	 (  84) minutes.SMART Attributes Data Structure revision number: 10Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE  1 Raw_Read_Error_Rate     0x000f   055   049   034    Pre-fail  Always       -       199487376  3 Spin_Up_Time            0x0003   094   094   000    Pre-fail  Always       -       0  4 Start_Stop_Count        0x0032   094   094   020    Old_age   Always       -       6801  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0  7 Seek_Error_Rate         0x000f   078   060   030    Pre-fail  Always       -       17465241915  9 Power_On_Hours          0x0032   089   089   000    Old_age   Always       -       9768 10 Spin_Retry_Count        0x0013   100   100   034    Pre-fail  Always       -       0 12 Power_Cycle_Count       0x0032   094   094   020    Old_age   Always       -       6559192 Power-Off_Retract_Count 0x0032   097   097   000    Old_age   Always       -       6589193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       487501194 Temperature_Celsius     0x0022   031   055   000    Old_age   Always       -       31 (0 12 0 0)195 Hardware_ECC_Recovered  0x001a   055   049   000    Old_age   Always       -       199487376197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0199 UDMA_CRC_Error_Count    0x003e   200   190   000    Old_age   Always       -       183200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0SMART Error Log Version: 1ATA Error Count: 184 (device log contains only the most recent five errors)	CR = Command Register [HEX]	FR = Features Register [HEX]	SC = Sector Count Register [HEX]	SN = Sector Number Register [HEX]	CL = Cylinder Low Register [HEX]	CH = Cylinder High Register [HEX]	DH = Device/Head Register [HEX]	DC = Device Command Register [HEX]	ER = Error register [HEX]	ST = Status register [HEX]Powered_Up_Time is measured from power on, and printed asDDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,SS=sec, and sss=millisec. It "wraps" after 49.710 days.Error 184 occurred at disk power-on lifetime: 8671 hours (361 days + 7 hours)  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  00 51 00 00 00 00 40  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  27 00 00 00 00 00 40 00      02:41:14.713  READ NATIVE MAX ADDRESS EXT  ec 00 00 00 00 00 00 00      02:41:14.705  IDENTIFY DEVICE  ca 00 08 18 9f 85 e6 00      02:41:14.705  WRITE DMA  ca 00 08 c0 df 38 e6 00      02:41:14.633  WRITE DMA  e7 00 00 5f 70 6e a0 00      02:41:14.633  FLUSH CACHEError 183 occurred at disk power-on lifetime: 6895 hours (287 days + 7 hours)  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  84 51 01 22 9a 9e e3  Error: ICRC, ABRT 1 sectors at LBA = 0x039e9a22 = 60725794  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  c8 03 1e 05 9a 9e e3 00      00:03:34.038  READ DMA  c8 03 02 03 9a 9e e3 00      00:03:33.537  READ DMA  c8 03 08 0f 90 1e e1 00      00:03:32.966  READ DMA  c8 03 07 50 90 1e e1 00      00:03:32.418  READ DMA  c8 03 01 4f 90 1e e1 00      00:03:41.913  READ DMAError 182 occurred at disk power-on lifetime: 6895 hours (287 days + 7 hours)  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  84 51 01 16 90 1e e1  Error: ICRC, ABRT 1 sectors at LBA = 0x011e9016 = 18780182  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  c8 03 08 0f 90 1e e1 00      00:03:34.038  READ DMA  c8 03 07 50 90 1e e1 00      00:03:33.537  READ DMA  c8 03 01 4f 90 1e e1 00      00:03:32.966  READ DMA  c8 03 20 cf 8f 1e e1 00      00:03:32.418  READ DMA  c8 03 06 81 00 00 e0 00      00:03:32.389  READ DMAError 181 occurred at disk power-on lifetime: 6895 hours (287 days + 7 hours)  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  84 51 01 56 90 1e e1  Error: ICRC, ABRT 1 sectors at LBA = 0x011e9056 = 18780246  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  c8 03 07 50 90 1e e1 00      00:03:34.038  READ DMA  c8 03 01 4f 90 1e e1 00      00:03:33.537  READ DMA  c8 03 20 cf 8f 1e e1 00      00:03:32.966  READ DMA  c8 03 06 81 00 00 e0 00      00:03:32.418  READ DMA  c8 03 02 7f 00 00 e0 00      00:03:32.389  READ DMAError 180 occurred at disk power-on lifetime: 6895 hours (287 days + 7 hours)  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  84 51 01 4f 90 1e e1  Error: ICRC, ABRT 1 sectors at LBA = 0x011e904f = 18780239  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  c8 03 01 4f 90 1e e1 00      00:03:34.038  READ DMA  c8 03 20 cf 8f 1e e1 00      00:03:33.537  READ DMA  c8 03 06 81 00 00 e0 00      00:03:32.966  READ DMA  c8 03 02 7f 00 00 e0 00      00:03:32.418  READ DMA  c8 03 08 bf 00 00 e0 00      00:03:32.389  READ DMASMART Self-test log structure revision number 1Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error# 1  Short offline       Completed without error       00%      6964         -# 2  Short offline       Completed without error       00%      6964         -# 3  Short offline       Completed without error       00%      6964         -# 4  Short offline       Aborted by host               10%      6964         -# 5  Extended offline    Aborted by host               90%      6963         -SMART Selective self-test log data structure revision number 1 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS    1        0        0  Not_testing    2        0        0  Not_testing    3        0        0  Not_testing    4        0        0  Not_testing    5        0        0  Not_testingSelective self-test flags (0x0):  After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.