rendered paste bodyLinux version 2.6.33-rc8 (root@whocares) (gcc version 4.4.3 (Debian 4.4.3-2) ) #1 SMP PREEMPT Sat Feb 13 11:04:57 CET 2010
Command line: BOOT_IMAGE=/vmlinuz-2.6.33-rc8 root=/dev/md1 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable)
BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS)
BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
NX (Execute Disable) protection: active
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
No AGP bridge found
last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFF8000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000138000000 aka 4992M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xc7eb0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
init_memory_mapping: 0000000000000000-00000000c7eb0000
0000000000 - 00c7e00000 page 2M
00c7e00000 - 00c7eb0000 page 4k
kernel direct mapping tables up to c7eb0000 @ 12000-18000
init_memory_mapping: 0000000100000000-0000000130000000
0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ 16000-1c000
ACPI: RSDP 00000000000fa590 00014 (v00 ACPIAM)
ACPI: RSDT 00000000c7eb0000 00040 (v01 121109 RSDT1746 20091211 MSFT 00000097)
ACPI: FACP 00000000c7eb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
ACPI: DSDT 00000000c7eb0440 086C1 (v01 AS146 AS146153 00000153 INTL 20051117)
ACPI: FACS 00000000c7ec0000 00040
ACPI: APIC 00000000c7eb0390 0006C (v01 121109 APIC1746 20091211 MSFT 00000097)
ACPI: MCFG 00000000c7eb0400 0003C (v01 121109 OEMMCFG 20091211 MSFT 00000097)
ACPI: OEMB 00000000c7ec0040 00071 (v01 121109 OEMB1746 20091211 MSFT 00000097)
ACPI: AAFT 00000000c7eb8b10 00027 (v01 121109 OEMAAFT 20091211 MSFT 00000097)
ACPI: HPET 00000000c7eb8b40 00038 (v01 121109 OEMHPET 20091211 MSFT 00000097)
ACPI: SSDT 00000000c7eb8b80 00206 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
(11 early reservations) ==> bootmem [0000000000 - 0130000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 0001500c08] TEXT DATA BSS ==> [0001000000 - 0001500c08]
#2 [0001501000 - 000150112f] BRK ==> [0001501000 - 000150112f]
#3 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000]
#4 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790]
#5 [000009fc00 - 00000fc2f0] BIOS reserved ==> [000009fc00 - 00000fc2f0]
#6 [00000fc47c - 00000ff780] BIOS reserved ==> [00000fc47c - 00000ff780]
#7 [00000fc2f0 - 00000fc47c] MP-table mpc ==> [00000fc2f0 - 00000fc47c]
#8 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
#9 [0000012000 - 0000016000] PGTABLE ==> [0000012000 - 0000016000]
#10 [0000016000 - 0000017000] PGTABLE ==> [0000016000 - 0000017000]
[ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000c7eb0
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1015359
DMA zone: 56 pages used for memmap
DMA zone: 103 pages reserved
DMA zone: 3824 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 800488 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
4 Processors exceeds NR_CPUS limit of 2
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at c7f00000 (gap: c7f00000:38000000)
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff880028200000 s80344 r8192 d22056 u1048576
pcpu-alloc: s80344 r8192 d22056 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 998232
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.33-rc8 root=/dev/md1 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
Memory: 3859984k/4980736k available (2672k kernel code, 919300k absent, 200540k reserved, 1571k data, 424k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Experimental preemptable hierarchical RCU implementation.
NR_IRQS:320
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-B-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed|
A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed|
double unlock:failed|failed|failed|failed|failed|failed|
initialize held:failed|failed|failed|failed|failed|failed|
bad unlock order: ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: | ok | |failed|
recursive read-lock #2: | ok | |failed|
mixed read-write-lock: |failed| |failed|
mixed write-read-lock: |failed| |failed|
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12:failed|failed| ok |
soft-irqs-on + irq-safe-A/12:failed|failed| ok |
hard-irqs-on + irq-safe-A/21:failed|failed| ok |
soft-irqs-on + irq-safe-A/21:failed|failed| ok |
sirq-safe-A => hirqs-on/12:failed|failed| ok |
sirq-safe-A => hirqs-on/21:failed|failed| ok |
hard-safe-A + irqs-on/12:failed|failed| ok |
soft-safe-A + irqs-on/12:failed|failed| ok |
hard-safe-A + irqs-on/21:failed|failed| ok |
soft-safe-A + irqs-on/21:failed|failed| ok |
hard-safe-A + unsafe-B #1/123:failed|failed| ok |
soft-safe-A + unsafe-B #1/123:failed|failed| ok |
hard-safe-A + unsafe-B #1/132:failed|failed| ok |
soft-safe-A + unsafe-B #1/132:failed|failed| ok |
hard-safe-A + unsafe-B #1/213:failed|failed| ok |
soft-safe-A + unsafe-B #1/213:failed|failed| ok |
hard-safe-A + unsafe-B #1/231:failed|failed| ok |
soft-safe-A + unsafe-B #1/231:failed|failed| ok |
hard-safe-A + unsafe-B #1/312:failed|failed| ok |
soft-safe-A + unsafe-B #1/312:failed|failed| ok |
hard-safe-A + unsafe-B #1/321:failed|failed| ok |
soft-safe-A + unsafe-B #1/321:failed|failed| ok |
hard-safe-A + unsafe-B #2/123:failed|failed| ok |
soft-safe-A + unsafe-B #2/123:failed|failed| ok |
hard-safe-A + unsafe-B #2/132:failed|failed| ok |
soft-safe-A + unsafe-B #2/132:failed|failed| ok |
hard-safe-A + unsafe-B #2/213:failed|failed| ok |
soft-safe-A + unsafe-B #2/213:failed|failed| ok |
hard-safe-A + unsafe-B #2/231:failed|failed| ok |
soft-safe-A + unsafe-B #2/231:failed|failed| ok |
hard-safe-A + unsafe-B #2/312:failed|failed| ok |
soft-safe-A + unsafe-B #2/312:failed|failed| ok |
hard-safe-A + unsafe-B #2/321:failed|failed| ok |
soft-safe-A + unsafe-B #2/321:failed|failed| ok |
hard-irq lock-inversion/123:failed|failed| ok |
soft-irq lock-inversion/123:failed|failed| ok |
hard-irq lock-inversion/132:failed|failed| ok |
soft-irq lock-inversion/132:failed|failed| ok |
hard-irq lock-inversion/213:failed|failed| ok |
soft-irq lock-inversion/213:failed|failed| ok |
hard-irq lock-inversion/231:failed|failed| ok |
soft-irq lock-inversion/231:failed|failed| ok |
hard-irq lock-inversion/312:failed|failed| ok |
soft-irq lock-inversion/312:failed|failed| ok |
hard-irq lock-inversion/321:failed|failed| ok |
soft-irq lock-inversion/321:failed|failed| ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |
--------------------------------------------------------
145 out of 218 testcases failed, as expected. |
----------------------------------------------------
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2194.917 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.83 BogoMIPS (lpj=2194917)
Mount-cache hash table entries: 256
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Freeing SMP alternatives: 23k freed
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
Booting Node 0, Processors #1 Ok.
Brought up 2 CPUs
Total of 2 processors activated (8780.06 BogoMIPS).
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000c8000000 aka 3200M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c8000000, cfffffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [f0000000, fdcfffff]
node 0 link 0: mmio [fdd00000, fddfffff]
node 0 link 0: mmio [fde00000, ffefffff]
TOM2: 0000000138000000 aka 4992M
bus: [00, 07] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [c8000000, ffffffff]
bus: 00 index 3 mmio: [138000000, fcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Error (dswload-0677): [PCI0] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20091214/psloop-231)
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff814f7d20), AE_NOT_FOUND
ACPI: Executed 5 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI Warning: Incorrect checksum in table [OEMB] - D7, should be CE (20091214/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xc7f00000-0xdfffffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:11.0: reg 10: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 14: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 18: [io 0x8000-0x8007]
pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003]
pci 0000:00:11.0: reg 20: [io 0x6000-0x600f]
pci 0000:00:11.0: reg 24: [mem 0xfdcff800-0xfdcffbff]
pci 0000:00:12.0: reg 10: [mem 0xfdcfe000-0xfdcfefff]
pci 0000:00:12.1: reg 10: [mem 0xfdcfd000-0xfdcfdfff]
pci 0000:00:12.2: reg 10: [mem 0xfdcff000-0xfdcff0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfdcfc000-0xfdcfcfff]
pci 0000:00:13.1: reg 10: [mem 0xfdcf7000-0xfdcf7fff]
pci 0000:00:13.2: reg 10: [mem 0xfdcf6800-0xfdcf68ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.2: reg 10: [mem 0xfdcf0000-0xfdcf3fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.5: reg 10: [mem 0xfdcf5000-0xfdcf5fff]
pci 0000:01:05.0: reg 10: [mem 0xc8000000-0xcfffffff pref]
pci 0000:01:05.0: reg 14: [io 0xb000-0xb0ff]
pci 0000:01:05.0: reg 18: [mem 0xfdef0000-0xfdefffff]
pci 0000:01:05.0: reg 24: [mem 0xfdd00000-0xfddfffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.1: reg 10: [mem 0xfdee8000-0xfdeebfff]
pci 0000:01:05.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff]
pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xfdff0000-0xfdffffff 64bit]
pci 0000:02:00.0: reg 20: [io 0xc000-0xc0ff]
pci 0000:02:00.0: reg 30: [mem 0xfdfc0000-0xfdfdffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: reg 10: [mem 0xfdfec000-0xfdfeffff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 03-04]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfeafffff]
pci 0000:00:09.0: bridge window [mem 0xfa000000-0xfcefffff 64bit pref]
pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:05:00.0: reg 18: [mem 0xfcfff000-0xfcffffff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xfcfe0000-0xfcfeffff 64bit pref]
pci 0000:05:00.0: reg 30: [mem 0xfebf0000-0xfebfffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:0a.0: PCI bridge to [bus 05-05]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:0a.0: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x040b] has been reserved
system 00:09: [io 0x04d6] has been reserved
system 00:09: [io 0x0c00-0x0c01] has been reserved
system 00:09: [io 0x0c14] has been reserved
system 00:09: [io 0x0c50-0x0c51] has been reserved
system 00:09: [io 0x0c52] has been reserved
system 00:09: [io 0x0c6c] has been reserved
system 00:09: [io 0x0c6f] has been reserved
system 00:09: [io 0x0cd0-0x0cd1] has been reserved
system 00:09: [io 0x0cd2-0x0cd3] has been reserved
system 00:09: [io 0x0cd4-0x0cd5] has been reserved
system 00:09: [io 0x0cd6-0x0cd7] has been reserved
system 00:09: [io 0x0cd8-0x0cdf] has been reserved
system 00:09: [io 0x0800-0x089f] has been reserved
system 00:09: [io 0x0b00-0x0b0f] has been reserved
system 00:09: [io 0x0b20-0x0b3f] has been reserved
system 00:09: [io 0x0900-0x090f] has been reserved
system 00:09: [io 0x0910-0x091f] has been reserved
system 00:09: [io 0xfe00-0xfefe] has been reserved
system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:0b: [io 0x0290-0x029f] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0xc7efffff] could not be reserved
system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff]
pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 03-04]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfeafffff]
pci 0000:00:09.0: bridge window [mem 0xfa000000-0xfcefffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 05-05]
pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:0a.0: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 06-06]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem disabled]
pci 0000:00:14.4: bridge window [mem pref disabled]
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfdefffff]
pci_bus 0000:01: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfeafffff]
pci_bus 0000:03: resource 2 [mem 0xfa000000-0xfcefffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:05: resource 2 [mem 0xfcf00000-0xfcffffff 64bit pref]
pci_bus 0000:06: resource 3 [io 0x0000-0xffff]
pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 7669
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:09.0: irq 25 for MSI/MSI-X
pcieport 0000:00:0a.0: setting latency timer to 64
pcieport 0000:00:0a.0: irq 26 for MSI/MSI-X
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfdcff800 port 0xfdcff900 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfdcff800 port 0xfdcff980 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfdcff800 port 0xfdcffa00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfdcff800 port 0xfdcffa80 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfdcff800 port 0xfdcffb00 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfdcff800 port 0xfdcffb80 irq 22
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
ata6: SATA link down (SStatus 0 SControl 300)
ata4: softreset failed (device not ready)
ata2: softreset failed (device not ready)
ata2: applying SB600 PMP SRST workaround and retrying
ata1: softreset failed (device not ready)
ata1: applying SB600 PMP SRST workaround and retrying
ata5: softreset failed (device not ready)
ata5: applying SB600 PMP SRST workaround and retrying
ata3: softreset failed (device not ready)
ata3: applying SB600 PMP SRST workaround and retrying
ata4: applying SB600 PMP SRST workaround and retrying
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
ata5.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
ata2.00: native sectors (586072368) is smaller than sectors (625142448)
ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
ata4.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: native sectors (586072368) is smaller than sectors (625142448)
ata3.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: ATA-7: ST3160812AS, 3.AAH, max UDMA/133
ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata4.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3160812AS 3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sdb:
sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sdc:
sd 3:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
scsi 4:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd:
sd 4:0:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI disk
sdb1 sdb2 sdb3 sdb4 < sdd1 sdd2 sdd3 sdd4 < sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
sdb5 sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sdd5 sdd6 >
sdb6 >
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 1:0:0:0: [sdb] Attached SCSI disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 6 and added 6 devices.
md: autorun ...
md: considering sdb5 ...
md: adding sdb5 ...
md: sdb3 has different UUID to sdb5
md: sdb1 has different UUID to sdb5
md: adding sdd5 ...
md: sdd3 has different UUID to sdb5
md: sdd1 has different UUID to sdb5
md: created md2
md: bind<sdd5>
md: bind<sdb5>
md: running: <sdb5><sdd5>
raid1: raid set md2 active with 2 out of 2 mirrors
md2: detected capacity change from 0 to 61450944512
md: considering sdb3 ...
md: adding sdb3 ...
md: sdb1 has different UUID to sdb3
md: adding sdd3 ...
md: sdd1 has different UUID to sdb3
md: created md1
md: bind<sdd3>
md: bind<sdb3>
md: running: <sdb3><sdd3>
raid1: raid set md1 active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 518062080
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sdd1 ...
md: created md0
md: bind<sdd1>
md: bind<sdb1>
md: running: <sdb1><sdd1>
raid1: raid set md0 active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 57475072
md: ... autorun DONE.
md1: unknown partition table
XFS mounting filesystem md1
Ending clean XFS mount for filesystem: md1
VFS: Mounted root (xfs filesystem) readonly on device 9:1.
Freeing unused kernel memory: 424k freed
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
input: PC Speaker as /devices/platform/pcspkr/input/input2
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi6 : pata_atiixp
scsi7 : pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdcff000
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfdcfe000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfdcf6800
md0:
md2:
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfdcfd000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdcfc000
unknown partition table
unknown partition table
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfdcf7000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdcf5000
ata8.00: ATAPI: _NEC DVD_RW ND-2500A, 1.08, max UDMA/33
ata8.01: ATAPI: PIONEER DVD-RW DVR-116D, 1.09, max UDMA/66
ata8.00: configured for UDMA/33
ata8.01: configured for UDMA/66
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
scsi 7:0:0:0: CD-ROM _NEC DVD_RW ND-2500A 1.08 PQ: 0 ANSI: 5
scsi 7:0:1:0: CD-ROM PIONEER DVD-RW DVR-116D 1.09 PQ: 0 ANSI: 5
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: irq 27 for MSI/MSI-X
eth0: RTL8168c/8111c at 0xffffc900100ae000, 00:19:66:92:37:71, XID 1c4000c0 IRQ 27
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 7:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sr 7:0:0:0: Attached scsi generic sg5 type 5
sr 7:0:1:0: Attached scsi generic sg6 type 5
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 7:0:1:0: Attached scsi CD-ROM sr1
HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:01:05.1: irq 28 for MSI/MSI-X
HDA Intel 0000:01:05.1: setting latency timer to 64
usb 4-3: new low speed USB device using ohci_hcd and address 2
usb 5-3: new low speed USB device using ohci_hcd and address 2
usb 1-3.1: new low speed USB device using ehci_hcd and address 4
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input3
generic-usb 0003:046D:C03E.0003: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-3/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID 046a:0023 as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input4
cherry 0003:046A:0023.0001: input: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:12.1-3/input0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/input/input5
cherry 0003:046A:0023.0002: input: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:12.1-3/input1
input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.1/1-3.1:1.0/input/input6
generic-usb 0003:0603:00F2.0004: input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:12.2-3.1/input0
input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.1/1-3.1:1.1/input/input7
generic-usb 0003:0603:00F2.0005: input,hiddev96: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:12.2-3.1/input1
usb 1-3.2: new low speed USB device using ehci_hcd and address 5
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.2/1-3.2:1.0/input/input8
generic-usb 0003:046D:C03D.0006: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.2-3.2/input0
hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0001
HDA Intel 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:02:00.1: irq 29 for MSI/MSI-X
HDA Intel 0000:02:00.1: setting latency timer to 64
Adding 987988k swap on /dev/sdb2. Priority:1 extents:1 across:987988k
Adding 987988k swap on /dev/sdd2. Priority:1 extents:1 across:987988k
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xa
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xc
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xe
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
w83627ehf: Found W83627EHG chip at 0x290
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:01:05.0: setting latency timer to 64
[drm] radeon: Initializing kernel modesetting.
[drm] register mmio base: 0xFDEF0000
[drm] register mmio size: 65536
ATOM BIOS: ASROCK
[drm] Clocks initialized !
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 1963648 kiB.
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] HDMI-A
[drm] HPD3
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_KLDSCP_LVTMA
[drm] fb mappable at 0xC8141000
[drm] vram apper at 0xC8000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
radeon 0000:02:00.0: enabling device (0000 -> 0003)
radeon 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:02:00.0: setting latency timer to 64
[drm] radeon: Initializing kernel modesetting.
[drm] register mmio base: 0xFDFF0000
[drm] register mmio size: 65536
ATOM BIOS: GV
[drm] GPU not posted. posting now...
[drm] Clocks initialized !
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 256bits DDR
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:02:00.0: irq 30 for MSI/MSI-X
[drm] radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV770 Microcode
platform radeon_cp.0: firmware: requesting radeon/RV770_pfp.bin
platform radeon_cp.0: firmware: requesting radeon/RV770_me.bin
platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Default TV standard: NTSC
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] DIN
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I
[drm] HPD2
[drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP2: INTERNAL_KLDSCP_LVTMA
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 7257600
[drm] fb depth is 24
[drm] pitch is 6912
fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 1
XFS mounting filesystem dm-2
Ending clean XFS mount for filesystem: dm-2
XFS mounting filesystem dm-0
Ending clean XFS mount for filesystem: dm-0
XFS mounting filesystem dm-1
Ending clean XFS mount for filesystem: dm-1
XFS mounting filesystem dm-4
Ending clean XFS mount for filesystem: dm-4
XFS mounting filesystem dm-3
Ending clean XFS mount for filesystem: dm-3
fuse init (API version 7.13)
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
r8169: eth0: link up
r8169: eth0: link up
kvm: Nested Virtualization enabled
Clocksource tsc unstable (delta = -202419003 ns)
ip_tables: (C) 2000-2006 Netfilter Core Team
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: device changed decodes: PCI:0000:01:05.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
radeon: You have old & broken userspace please consider updating mesa & xf86-video-ati