rendered paste body[ 0.000000] Initializing cgroup subsys cpuset[ 0.000000] Initializing cgroup subsys cpu[ 0.000000] Linux version 2.6.26-2-xen-amd64 (Debian 2.6.26-19lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Nov 5 04:27:12 UTC 2009[ 0.000000] Command line: root=/dev/mapper/orie-root ro console=tty0[ 0.000000] BIOS-provided physical RAM map:[ 0.000000] Xen: 0000000000000000 - 0000000169ecd000 (usable)[ 0.000000] Entering add_active_range(0, 0, 1482445) 0 entries of 256 used[ 0.000000] max_pfn_mapped = 1482445[ 0.000000] init_memory_mapping[ 0.000000] DMI 2.4 present.[ 0.000000] Entering add_active_range(0, 0, 1482445) 0 entries of 256 used[ 0.000000] early res: 0 [200000-631917] TEXT DATA BSS[ 0.000000] early res: 1 [632000-2612fff] Xen provided[ 0.000000] early res: 2 [2613000-2617fff] INITMAP[ 0.000000] early res: 3 [2618000-316ffff] PGTABLE[ 0.000000] Zone PFN ranges:[ 0.000000] DMA 0 -> 4096[ 0.000000] DMA32 4096 -> 1048576[ 0.000000] Normal 1048576 -> 1482445[ 0.000000] Movable zone start PFN for each node[ 0.000000] early_node_map[1] active PFN ranges[ 0.000000] 0: 0 -> 1482445[ 0.000000] On node 0 totalpages: 1482445[ 0.000000] DMA zone: 56 pages used for memmap[ 0.000000] DMA zone: 0 pages reserved[ 0.000000] DMA zone: 4040 pages, LIFO batch:0[ 0.000000] DMA32 zone: 14280 pages used for memmap[ 0.000000] DMA32 zone: 1030200 pages, LIFO batch:31[ 0.000000] Normal zone: 5932 pages used for memmap[ 0.000000] Normal zone: 427937 pages, LIFO batch:31[ 0.000000] Movable zone: 0 pages used for memmap[ 0.000000] ACPI: RSDP 000F8210, 0024 (r2 ATI )[ 0.000000] ACPI: XSDT D7EE3100, 004C (r1 ATI ASUSACPI 42302E31 AWRD 0)[ 0.000000] ACPI: FACP D7EE8440, 00F4 (r3 ATI ASUSACPI 42302E31 AWRD 0)[ 0.000000] ACPI: DSDT D7EE3280, 515D (r1 ATI ASUSACPI 1000 MSFT 3000000)[ 0.000000] ACPI: FACS D7EE0000, 0040[ 0.000000] ACPI: SSDT D7EE8680, 0248 (r1 PTLTD POWERNOW 1 LTP 1)[ 0.000000] ACPI: HPET D7EE8940, 0038 (r1 ATI ASUSACPI 42302E31 AWRD 98)[ 0.000000] ACPI: MCFG D7EE89C0, 003C (r1 ATI ASUSACPI 42302E31 AWRD 0)[ 0.000000] ACPI: APIC D7EE8580, 0084 (r1 ATI ASUSACPI 42302E31 AWRD 0)[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)[ 0.000000] ACPI: IRQ0 used by override.[ 0.000000] ACPI: IRQ2 used by override.[ 0.000000] ACPI: IRQ9 used by override.[ 0.000000] Setting APIC routing to xen[ 0.000000] Using ACPI (MADT) for SMP configuration information[ 0.000000] Allocating PCI resources starting at f1000000 (gap: f0000000:ec00000)[ 0.000000] PERCPU: Allocating 22192 bytes of per cpu data[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1462177[ 0.000000] Kernel command line: root=/dev/mapper/orie-root ro console=tty0[ 0.000000] Initializing CPU#0[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)[ 0.000000] Xen reported: 2399.980 MHz processor.[ 0.004000] Console: colour VGA+ 80x25[ 0.004000] console [tty0] enabled[ 0.004000] console [hvc-1] enabled[ 0.004000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)[ 0.004000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)[ 0.004000] Software IO TLB enabled: [ 0.004000] Aperture: 64 megabytes[ 0.004000] Kernel range: ffff880009018000 - ffff88000d018000[ 0.004000] Address size: 27 bits[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)[ 0.004000] Memory: 5712416k/5929780k available (2279k kernel code, 208652k reserved, 1023k data, 216k init)[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated[ 0.880053] Calibrating delay using timer specific routine.. 4801.26 BogoMIPS (lpj=9602536)[ 0.880220] Security Framework initialized[ 0.880289] SELinux: Disabled at boot.[ 0.880354] Capability LSM initialized[ 0.880433] Mount-cache hash table entries: 256[ 0.880621] Initializing cgroup subsys ns[ 0.880690] Initializing cgroup subsys cpuacct[ 0.880756] Initializing cgroup subsys devices[ 0.880844] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)[ 0.880912] CPU: L2 Cache: 512K (64 bytes/line)[ 0.880979] CPU: Physical Processor ID: 0[ 0.881044] CPU: Processor Core ID: 0[ 0.881121] SMP alternatives: switching to UP code[ 0.888982] ACPI: Core revision 20080321[ 0.911276] SMP alternatives: switching to SMP code[ 0.919476] Brought up 2 CPUs[ 0.919476] Initializing CPU#1[ 0.919476] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)[ 0.919476] CPU: L2 Cache: 512K (64 bytes/line)[ 0.919476] CPU: Physical Processor ID: 0[ 0.919476] CPU: Processor Core ID: 1[ 0.923463] CPU0 attaching sched-domain:[ 0.923463] domain 0: span 0-1[ 0.923463] groups: 0 1[ 0.923463] CPU1 attaching sched-domain:[ 0.923463] domain 0: span 0-1[ 0.923463] groups: 1 0[ 0.923653] net_namespace: 1224 bytes[ 0.927442] NET: Registered protocol family 16[ 0.930936] node 0 link 0: io port [a000, ffff][ 0.930936] TOM: 00000000e0000000 aka 3584M[ 0.930936] node 0 link 0: mmio [a0000, bffff][ 0.930936] node 0 link 0: mmio [f0000000, f7ffffff][ 0.930936] node 0 link 0: mmio [e0000000, dfffffff][ 0.930936] node 0 link 0: mmio [f8000000, fe02ffff][ 0.930936] node 0 link 0: mmio [e0000000, e03fffff][ 0.930936] TOM2: 00000001a0000000 aka 6656M[ 0.930936] bus: [00,03] on node 0 link 0[ 0.930936] bus: 00 index 0 io port: [0, ffff][ 0.930936] bus: 00 index 1 mmio: [a0000, bffff][ 0.930936] bus: 00 index 2 mmio: [e0400000, ffffffff][ 0.930936] bus: 00 index 3 mmio: [e0000000, e03fffff][ 0.930936] bus: 00 index 4 mmio: [1a0000000, fcffffffff][ 0.930936] ACPI: bus type pci registered[ 0.930936] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255[ 0.930936] PCI: MCFG area at e0000000 reserved in E820[ 0.948572] PCI: Using MMCONFIG at e0000000 - efffffff[ 0.948572] PCI: Using configuration type 1 for base access[ 0.950933] ACPI: EC: Look up EC in DSDT[ 0.957032] ACPI: Interpreter enabled[ 0.957032] ACPI: (supports S0 S1 S3 S5)[ 0.957032] ACPI: Using IOAPIC for interrupt routing[ 0.962931] ACPI: PCI Root Bridge [PCI0] (0000:00)[ 0.962931] pci 0000:00:12.0: set SATA to AHCI mode[ 0.965963] PCI: Transparent bridge - 0000:00:14.4[ 0.966073] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT][ 0.966351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT][ 0.966482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT][ 0.966562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT][ 0.990925] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.[ 0.991688] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.[ 0.991688] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.[ 0.992064] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.[ 0.992818] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.[ 0.993619] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11)[ 0.995334] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)[ 0.995334] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.[ 0.998605] Linux Plug and Play Support v0.97 (c) Adam Belay[ 0.999333] pnp: PnP ACPI init[ 0.999333] ACPI: bus type pnp registered[ 0.999333] pnp 00:00: parse allocated resources[ 0.999333] pnp 00:00: add io 0xcf8-0xcff flags 0x1[ 0.999333] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)[ 0.999333] pnp 00:01: parse allocated resources[ 0.999333] pnp 00:01: add io 0x4100-0x411f flags 0x1[ 0.999334] pnp 00:01: add io 0x228-0x22f flags 0x1[ 0.999334] pnp 00:01: add io 0x40b-0x40b flags 0x1[ 0.999334] pnp 00:01: add io 0x4d6-0x4d6 flags 0x1[ 0.999334] pnp 00:01: add io 0xc00-0xc01 flags 0x1[ 0.999334] pnp 00:01: add io 0xc14-0xc14 flags 0x1[ 0.999334] pnp 00:01: add io 0xc50-0xc52 flags 0x1[ 0.999334] pnp 00:01: add io 0xc6c-0xc6d flags 0x1[ 0.999334] pnp 00:01: add io 0xc6f-0xc6f flags 0x1[ 0.999334] pnp 00:01: add io 0xcd0-0xcd1 flags 0x1[ 0.999334] pnp 00:01: add io 0xcd2-0xcd3 flags 0x1[ 0.999334] pnp 00:01: add io 0xcd4-0xcdf flags 0x1[ 0.999334] pnp 00:01: add io 0x4000-0x40fe flags 0x1[ 0.999334] pnp 00:01: add io 0x4210-0x4217 flags 0x1[ 0.999334] pnp 00:01: add io 0xb00-0xb0f flags 0x1[ 0.999334] pnp 00:01: add io 0xb10-0xb1f flags 0x1[ 0.999334] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c[ 0.999334] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)[ 0.999334] pnp 00:02: parse allocated resources[ 0.999334] pnp 00:02: add dma 4 flags 0x4[ 0.999334] pnp 00:02: add io 0x0-0xf flags 0x1[ 0.999334] pnp 00:02: add io 0x80-0x90 flags 0x1[ 0.999334] pnp 00:02: add io 0x94-0x9f flags 0x1[ 0.999334] pnp 00:02: add io 0xc0-0xdf flags 0x1[ 0.999334] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)[ 0.999334] pnp 00:03: parse allocated resources[ 0.999334] pnp 00:03: add irq 8 flags 0x1[ 0.999334] pnp 00:03: add mem 0xfed00000-0xfed003ff flags 0x1[ 0.999334] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)[ 0.999334] pnp 00:04: parse allocated resources[ 0.999334] pnp 00:04: add io 0x70-0x73 flags 0x1[ 0.999334] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)[ 0.999334] pnp 00:05: parse allocated resources[ 0.999334] pnp 00:05: add io 0x61-0x61 flags 0x1[ 0.999334] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)[ 0.999334] pnp 00:06: parse allocated resources[ 0.999334] pnp 00:06: add io 0xf0-0xff flags 0x1[ 0.999334] pnp 00:06: add irq 13 flags 0x1[ 0.999334] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)[ 0.999334] pnp 00:07: parse allocated resources[ 0.999334] pnp 00:07: add io 0x10-0x1f flags 0x1[ 0.999334] pnp 00:07: add io 0x22-0x3f flags 0x1[ 0.999334] pnp 00:07: add io 0x44-0x5f flags 0x1[ 0.999334] pnp 00:07: add io 0x62-0x63 flags 0x1[ 0.999334] pnp 00:07: add io 0x65-0x6f flags 0x1[ 0.999334] pnp 00:07: add io 0x74-0x7f flags 0x1[ 0.999334] pnp 00:07: add io 0x91-0x93 flags 0x1[ 0.999334] pnp 00:07: add io 0xa2-0xbf flags 0x1[ 0.999334] pnp 00:07: add io 0xe0-0xef flags 0x1[ 0.999334] pnp 00:07: add io 0x4d0-0x4d1 flags 0x1[ 0.999334] pnp 00:07: add io 0x220-0x225 flags 0x1[ 0.999334] pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c[ 0.999334] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)[ 0.999334] pnp 00:08: parse allocated resources[ 0.999334] pnp 00:08: add io 0x3f8-0x3ff flags 0x1[ 0.999334] pnp 00:08: add irq 4 flags 0x1[ 0.999344] pnp 00:08: parse resource options[ 0.999346] pnp 00:08: new independent option[ 0.999352] pnp 00:08: new dependent option (priority 0x1)[ 0.999355] pnp 00:08: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1[ 0.999360] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1[ 0.999363] pnp 00:08: new dependent option (priority 0x1)[ 0.999365] pnp 00:08: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1[ 0.999369] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1[ 0.999372] pnp 00:08: new dependent option (priority 0x1)[ 0.999374] pnp 00:08: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1[ 0.999378] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1[ 0.999381] pnp 00:08: new dependent option (priority 0x1)[ 0.999384] pnp 00:08: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1[ 0.999388] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1[ 0.999390] pnp 00:08: end dependent options[ 0.999478] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)[ 0.999812] pnp 00:09: parse allocated resources[ 1.000040] pnp 00:09: add io 0x378-0x37f flags 0x1[ 1.000045] pnp 00:09: add irq 7 flags 0x1[ 1.000047] pnp 00:09: parse resource options[ 1.000049] pnp 00:09: new independent option[ 1.000054] pnp 00:09: new dependent option (priority 0x1)[ 1.000056] pnp 00:09: io min 0x378 max 0x378 align 1 size 8 flags 0x1[ 1.000060] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1[ 1.000063] pnp 00:09: new dependent option (priority 0x1)[ 1.000066] pnp 00:09: io min 0x278 max 0x278 align 1 size 8 flags 0x1[ 1.000070] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1[ 1.000072] pnp 00:09: new dependent option (priority 0x1)[ 1.000075] pnp 00:09: io min 0x3bc max 0x3bc align 1 size 4 flags 0x1[ 1.000079] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1[ 1.000081] pnp 00:09: end dependent options[ 1.000164] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)[ 1.000405] pnp 00:0a: parse allocated resources[ 1.000435] pnp 00:0a: add mem 0xe0000000-0xefffffff flags 0x1[ 1.000437] pnp 00:0a: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c[ 1.000535] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)[ 1.000548] pnp 00:0b: parse allocated resources[ 1.000761] pnp 00:0b: add mem 0xf0000-0xf3fff flags 0x1[ 1.000763] pnp 00:0b: add mem 0xf4000-0xf7fff flags 0x1[ 1.000765] pnp 00:0b: add mem 0xf8000-0xfbfff flags 0x1[ 1.000767] pnp 00:0b: add mem 0xfc000-0xfffff flags 0x1[ 1.000769] pnp 00:0b: add mem 0xd7ef0000-0xd7feffff flags 0x1[ 1.000771] pnp 00:0b: add mem 0xfed00000-0xfed000ff flags 0x1[ 1.000774] pnp 00:0b: add mem 0xd7ee0000-0xd7efffff flags 0x1[ 1.000776] pnp 00:0b: add mem 0xffff0000-0xffffffff flags 0x1[ 1.000778] pnp 00:0b: add mem 0x0-0x9ffff flags 0x1[ 1.000780] pnp 00:0b: add mem 0x100000-0xd7edffff flags 0x1[ 1.000782] pnp 00:0b: add mem 0xd7ff0000-0xdffeffff flags 0x1[ 1.000784] pnp 00:0b: add mem 0xfec00000-0xfec00fff flags 0x1[ 1.000787] pnp 00:0b: add mem 0xfee00000-0xfee00fff flags 0x1[ 1.000789] pnp 00:0b: add mem 0xfff80000-0xfffeffff flags 0x1[ 1.000792] pnp 00:0b: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c[ 1.000928] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)[ 1.000936] pnp: PnP ACPI: found 12 devices[ 1.001003] ACPI: ACPI bus type pnp unregistered[ 1.002554] xen_mem: Initialising balloon driver.[ 1.003333] usbcore: registered new interface driver usbfs[ 1.003333] usbcore: registered new interface driver hub[ 1.003333] usbcore: registered new device driver usb[ 1.003333] PCI: Using ACPI for IRQ routing[ 1.016291] ACPI: RTC can wake from S4[ 1.032199] pnp: the driver 'system' has been registered[ 1.032210] system 00:01: ioport range 0x4100-0x411f has been reserved[ 1.032277] system 00:01: ioport range 0x228-0x22f has been reserved[ 1.032342] system 00:01: ioport range 0x40b-0x40b has been reserved[ 1.032407] system 00:01: ioport range 0x4d6-0x4d6 has been reserved[ 1.035270] system 00:01: ioport range 0xc00-0xc01 has been reserved[ 1.035330] system 00:01: ioport range 0xc14-0xc14 has been reserved[ 1.035330] system 00:01: ioport range 0xc50-0xc52 has been reserved[ 1.035330] system 00:01: ioport range 0xc6c-0xc6d has been reserved[ 1.035330] system 00:01: ioport range 0xc6f-0xc6f has been reserved[ 1.035330] system 00:01: ioport range 0xcd0-0xcd1 has been reserved[ 1.035330] system 00:01: ioport range 0xcd2-0xcd3 has been reserved[ 1.035330] system 00:01: ioport range 0xcd4-0xcdf has been reserved[ 1.035330] system 00:01: ioport range 0x4000-0x40fe has been reserved[ 1.035330] system 00:01: ioport range 0x4210-0x4217 has been reserved[ 1.035330] system 00:01: ioport range 0xb00-0xb0f has been reserved[ 1.035330] system 00:01: ioport range 0xb10-0xb1f has been reserved[ 1.035330] system 00:01: driver attached[ 1.035330] system 00:07: ioport range 0x4d0-0x4d1 has been reserved[ 1.035330] system 00:07: ioport range 0x220-0x225 has been reserved[ 1.035330] system 00:07: driver attached[ 1.035330] system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved[ 1.035404] system 00:0a: driver attached[ 1.035411] system 00:0b: iomem range 0xf0000-0xf3fff could not be reserved[ 1.035477] system 00:0b: iomem range 0xf4000-0xf7fff could not be reserved[ 1.035542] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved[ 1.035607] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved[ 1.035673] system 00:0b: iomem range 0xd7ef0000-0xd7feffff could not be reserved[ 1.035743] system 00:0b: iomem range 0xfed00000-0xfed000ff could not be reserved[ 1.035814] system 00:0b: iomem range 0xd7ee0000-0xd7efffff could not be reserved[ 1.035884] system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved[ 1.035953] system 00:0b: iomem range 0x0-0x9ffff could not be reserved[ 1.036019] system 00:0b: iomem range 0x100000-0xd7edffff could not be reserved[ 1.036088] system 00:0b: iomem range 0xd7ff0000-0xdffeffff has been reserved[ 1.036153] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved[ 1.036223] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved[ 1.036292] system 00:0b: iomem range 0xfff80000-0xfffeffff could not be reserved[ 1.036361] system 00:0b: driver attached[ 1.038852] PCI: Bridge: 0000:00:01.0[ 1.038919] IO window: c000-cfff[ 1.038987] MEM window: 0xfdb00000-0xfdcfffff[ 1.039054] PREFETCH window: 0x00000000f0000000-0x00000000f7ffffff[ 1.039127] PCI: Bridge: 0000:00:07.0[ 1.039193] IO window: d000-dfff[ 1.039275] MEM window: 0xfda00000-0xfdafffff[ 1.039350] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff[ 1.039397] PCI: Bridge: 0000:00:14.4[ 1.039397] IO window: a000-bfff[ 1.039397] MEM window: 0xfde00000-0xfdefffff[ 1.039397] PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff[ 1.039397] PCI: Setting latency timer of device 0000:00:07.0 to 64[ 1.039397] NET: Registered protocol family 2[ 1.081430] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)[ 1.083179] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)[ 1.085745] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)[ 1.086413] TCP: Hash tables configured (established 262144 bind 65536)[ 1.086480] TCP reno registered[ 1.097471] NET: Registered protocol family 1[ 1.097644] checking if image is initramfs... it is[ 1.115982] Freeing initrd memory: 20978k freed[ 1.133547] audit: initializing netlink socket (disabled)[ 1.133547] type=2000 audit(1264599670.120:1): initialized[ 1.133547] VFS: Disk quotas dquot_6.5.1[ 1.133547] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[ 1.133547] msgmni has been set to 11606[ 1.133547] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)[ 1.133547] io scheduler noop registered[ 1.133547] io scheduler anticipatory registered[ 1.133547] io scheduler deadline registered[ 1.133547] io scheduler cfq registered (default)[ 1.394050] pci 0000:01:05.0: Boot video device[ 1.394514] PCI: Setting latency timer of device 0000:00:07.0 to 64[ 1.394588] assign_interrupt_mode Found MSI capability[ 1.394703] no ownder[ 1.394768] map irq failed[ 1.394835] Allocate Port Service[0000:00:07.0:pcie00][ 1.395200] Allocate Port Service[0000:00:07.0:pcie03][ 1.400316] Linux agpgart interface v0.103[ 1.400316] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled[ 1.400316] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A[ 1.400316] pnp: the driver 'serial' has been registered[ 1.400316] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A[ 1.400316] serial 00:08: driver attached[ 1.400316] brd: module loaded[ 1.400316] input: Macintosh mouse button emulation as /class/input/input0[ 1.402153] Xen virtual console successfully installed as hvc0[ 1.402511] Event-channel device installed.[ 1.405454] netfront: Initialising virtual ethernet driver.[ 1.405725] pnp: the driver 'i8042 kbd' has been registered[ 1.405725] pnp: the driver 'i8042 aux' has been registered[ 1.405725] pnp: the driver 'i8042 kbd' has been unregistered[ 1.405725] pnp: the driver 'i8042 aux' has been unregistered[ 1.405725] PNP: No PS/2 controller found. Probing ports directly.[ 1.405725] serio: i8042 KBD port at 0x60,0x64 irq 1[ 1.405725] serio: i8042 AUX port at 0x60,0x64 irq 12[ 1.434363] mice: PS/2 mouse device common for all mice[ 1.434484] pnp: the driver 'rtc_cmos' has been registered[ 1.434563] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0[ 1.434661] rtc0: alarms up to one month[ 1.434725] rtc_cmos 00:04: driver attached[ 1.434843] No iBFT detected.[ 1.435234] TCP cubic registered[ 1.435299] NET: Registered protocol family 17[ 1.436001] registered taskstats version 1[ 1.436235] rtc_cmos 00:04: setting system clock to 2010-01-27 13:41:10 UTC (1264599670)[ 1.436316] Freeing unused kernel memory: 216k freed[ 1.563655] ACPI: PNP0C0B:00 is registered as cooling_device0[ 1.563740] ACPI: Fan [FAN] (on)[ 1.571709] ACPI: ACPI0007:00 is registered as cooling_device1[ 1.571709] ACPI: ACPI0007:01 is registered as cooling_device2[ 1.571709] ACPI: ACPI0007:02 is registered as cooling_device3[ 1.571709] ACPI: ACPI0007:03 is registered as cooling_device4[ 1.571709] ACPI: Expecting a [Reference] package element, found type 0[ 1.571709] ACPI: LNXTHERM:01 is registered as thermal_zone0[ 1.573078] ACPI: Thermal Zone [THRM] (40 C)[ 1.978450] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded[ 1.978450] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19[ 1.978450] PCI: Setting latency timer of device 0000:02:00.0 to 64[ 1.978450] no ownder[ 1.978450] map irq failed[ 1.978450] r8169 0000:02:00.0: no MSI. Back to INTx.[ 1.978450] eth0: RTL8168b/8111b at 0xffffc20000016000, 00:1f:c6:b0:35:96, XID 38000000 IRQ 19[ 1.994382] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver[ 1.994382] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16[ 1.994382] ohci_hcd 0000:00:13.0: OHCI Host Controller[ 1.994588] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1[ 1.994695] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000[ 1.994442] No dock devices found.[ 2.007561] SCSI subsystem initialized[ 2.013034] libata version 3.00 loaded.[ 2.054582] usb usb1: configuration #1 chosen from 1 choice[ 2.054690] hub 1-0:1.0: USB hub found[ 2.054781] hub 1-0:1.0: 2 ports detected[ 2.057131] Uniform Multi-Platform E-IDE driver[ 2.057213] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx[ 2.159358] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001[ 2.159435] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.159505] usb usb1: Product: OHCI Host Controller[ 2.159569] usb usb1: Manufacturer: Linux 2.6.26-2-xen-amd64 ohci_hcd[ 2.159633] usb usb1: SerialNumber: 0000:00:13.0[ 2.160576] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17[ 2.160727] ohci_hcd 0000:00:13.1: OHCI Host Controller[ 2.160835] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2[ 2.160940] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000[ 2.221309] usb usb2: configuration #1 chosen from 1 choice[ 2.221409] hub 2-0:1.0: USB hub found[ 2.221499] hub 2-0:1.0: 2 ports detected[ 2.325660] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001[ 2.325734] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.325804] usb usb2: Product: OHCI Host Controller[ 2.325869] usb usb2: Manufacturer: Linux 2.6.26-2-xen-amd64 ohci_hcd[ 2.325933] usb usb2: SerialNumber: 0000:00:13.1[ 2.326093] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18[ 2.326247] ohci_hcd 0000:00:13.2: OHCI Host Controller[ 2.326361] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3[ 2.326465] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000[ 2.385648] usb usb3: configuration #1 chosen from 1 choice[ 2.385741] hub 3-0:1.0: USB hub found[ 2.385823] hub 3-0:1.0: 2 ports detected[ 2.489638] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001[ 2.489706] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.489775] usb usb3: Product: OHCI Host Controller[ 2.489839] usb usb3: Manufacturer: Linux 2.6.26-2-xen-amd64 ohci_hcd[ 2.489903] usb usb3: SerialNumber: 0000:00:13.2[ 2.490036] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17[ 2.490183] ohci_hcd 0000:00:13.3: OHCI Host Controller[ 2.490298] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4[ 2.490386] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000[ 2.549654] usb usb4: configuration #1 chosen from 1 choice[ 2.549743] hub 4-0:1.0: USB hub found[ 2.549824] hub 4-0:1.0: 2 ports detected[ 2.653697] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001[ 2.653765] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.656537] usb usb4: Product: OHCI Host Controller[ 2.656537] usb usb4: Manufacturer: Linux 2.6.26-2-xen-amd64 ohci_hcd[ 2.656537] usb usb4: SerialNumber: 0000:00:13.3[ 2.656962] ahci 0000:00:12.0: version 3.0[ 2.657012] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22[ 2.657182] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit[ 3.657739] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode[ 3.657814] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part [ 3.659747] scsi0 : ahci[ 3.659913] scsi1 : ahci[ 3.660018] scsi2 : ahci[ 3.660120] scsi3 : ahci[ 3.660254] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22[ 3.660329] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22[ 3.660401] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22[ 3.660474] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22[ 4.144888] ata1: softreset failed (device not ready)[ 4.144959] ata1: failed due to HW bug, retry pmp=0[ 4.308892] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[ 4.309572] ata1.00: ATA-7: Maxtor 7Y250M0, YAR51PW0, max UDMA/133[ 4.309635] ata1.00: 490234752 sectors, multi 0: LBA48 [ 4.309701] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd[ 4.309814] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd[ 4.309814] ata1.00: configured for UDMA/133[ 4.644062] ata2: SATA link down (SStatus 0 SControl 300)[ 4.980052] ata3: SATA link down (SStatus 0 SControl 300)[ 5.316060] ata4: SATA link down (SStatus 0 SControl 300)[ 5.332124] scsi 0:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5[ 5.332298] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18[ 5.332459] ohci_hcd 0000:00:13.4: OHCI Host Controller[ 5.332586] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5[ 5.332683] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000[ 5.392362] usb usb5: configuration #1 chosen from 1 choice[ 5.392454] hub 5-0:1.0: USB hub found[ 5.392539] hub 5-0:1.0: 2 ports detected[ 5.496353] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001[ 5.496421] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 5.496490] usb usb5: Product: OHCI Host Controller[ 5.496553] usb usb5: Manufacturer: Linux 2.6.26-2-xen-amd64 ohci_hcd[ 5.496617] usb usb5: SerialNumber: 0000:00:13.4[ 5.497188] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19[ 5.497351] ehci_hcd 0000:00:13.5: EHCI Host Controller[ 5.497477] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6[ 5.497618] ehci_hcd 0000:00:13.5: debug port 1[ 5.497712] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000[ 5.508494] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004[ 5.508619] usb usb6: configuration #1 chosen from 1 choice[ 5.508711] hub 6-0:1.0: USB hub found[ 5.508789] hub 6-0:1.0: 10 ports detected[ 5.612570] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002[ 5.612641] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 5.612713] usb usb6: Product: EHCI Host Controller[ 5.612780] usb usb6: Manufacturer: Linux 2.6.26-2-xen-amd64 ehci_hcd[ 5.612847] usb usb6: SerialNumber: 0000:00:13.5[ 5.614822] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1[ 5.614904] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16[ 5.615045] SB600_PATA: not 100% native mode: will probe irqs later[ 5.615122] ide0: BM-DMA at 0xe400-0xe407[ 5.615204] Probing IDE interface ide0...[ 5.898290] usb 6-10: new high speed USB device using ehci_hcd and address 2[ 5.902660] hda: SAMSUNG SP2514N, ATA DISK drive[ 6.030703] usb 6-10: configuration #1 chosen from 1 choice[ 6.030950] hub 6-10:1.0: USB hub found[ 6.031162] hub 6-10:1.0: 4 ports detected[ 6.134370] usb 6-10: New USB device found, idVendor=0409, idProduct=005a[ 6.134439] usb 6-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0[ 6.350317] usb 6-10.3: new low speed USB device using ehci_hcd and address 3[ 6.464170] usb 6-10.3: configuration #1 chosen from 1 choice[ 6.464600] usb 6-10.3: New USB device found, idVendor=046d, idProduct=c315[ 6.464668] usb 6-10.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0[ 6.464737] usb 6-10.3: Product: Logitech USB Keyboard[ 6.464800] usb 6-10.3: Manufacturer: Logitech[ 6.574310] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4[ 6.593035] hda: UDMA/100 mode selected[ 6.609515] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14[ 6.622684] PDC20269: IDE controller (0x105a:0x4d69 rev 0x02) at PCI slot 0000:03:06.0[ 6.622812] ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 21 (level, low) -> IRQ 21[ 6.633045] PDC20269: PLL input clock is 16438 kHz[ 6.663133] PDC20269: 100% native mode on irq 21[ 6.663209] ide2: BM-DMA at 0xac00-0xac07[ 6.663300] ide3: BM-DMA at 0xac08-0xac0f[ 6.663377] Probing IDE interface ide2...[ 6.678071] usb 6-10.4: new low speed USB device using ehci_hcd and address 4[ 6.717456] Driver 'sd' needs updating - please use bus_type methods[ 6.717590] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)[ 6.717590] sd 0:0:0:0: [sda] Write Protect is off[ 6.717590] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[ 6.717590] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[ 6.718079] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)[ 6.718158] sd 0:0:0:0: [sda] Write Protect is off[ 6.718224] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[ 6.718241] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[ 6.718315] sda: sda1 sda2 < sda5 >[ 6.732635] sd 0:0:0:0: [sda] Attached SCSI disk[ 6.791767] usb 6-10.4: configuration #1 chosen from 1 choice[ 6.792302] usb 6-10.4: New USB device found, idVendor=046d, idProduct=c408[ 6.792372] usb 6-10.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0[ 6.792442] usb 6-10.4: Product: USB Trackball[ 6.792506] usb 6-10.4: Manufacturer: Logitech[ 6.854667] usbcore: registered new interface driver hiddev[ 6.857726] input: Logitech Logitech USB Keyboard as /class/input/input1[ 6.893720] input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.5-10.3[ 6.897425] input: Logitech USB Trackball as /class/input/input2[ 6.914803] input,hidraw1: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:13.5-10.4[ 6.915120] usbcore: registered new interface driver usbhid[ 6.915185] usbhid: v2.6:USB HID core driver[ 7.405849] hde: Memorex DVD+-RAM 530L v1, ATAPI CD/DVD-ROM drive[ 8.077349] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4[ 8.077701] hde: UDMA/66 mode selected[ 8.078126] Probing IDE interface ide3...[ 8.645332] ide2 at 0xbc00-0xbc07,0xb802 on irq 21[ 8.645478] ide3 at 0xb400-0xb407,0xb002 on irq 21[ 8.681409] hda: max request size: 512KiB[ 8.681559] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63[ 8.683185] hda: cache flushes supported[ 8.684868] hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >[ 8.777219] hde: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache[ 8.777219] Uniform CD-ROM driver Revision: 3.20[ 9.172681] device-mapper: uevent: version 1.0.3[ 9.173342] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com[ 9.538481] kjournald starting. Commit interval 5 seconds[ 9.538582] EXT3-fs: mounted filesystem with ordered data mode.[ 10.956224] udevd version 125 started[ 11.456413] udev: renamed network interface eth0 to eth2[ 11.910890] input: Power Button (FF) as /class/input/input3[ 11.971391] ACPI: Power Button (FF) [PWRF][ 11.971535] input: Power Button (CM) as /class/input/input4[ 12.024339] ACPI: Power Button (CM) [PWRB][ 12.068479] pci_hotplug: PCI Hot Plug PCI Core version: 0.5[ 12.089313] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4[ 12.389486] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device[ 12.655993] input: PC Speaker as /class/input/input5[ 12.890506] pnp: the driver 'parport_pc' has been registered[ 12.890506] parport_pc 00:09: reported by Plug and Play ACPI[ 12.890506] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP][ 12.989626] parport_pc 00:09: driver attached[ 13.307693] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16[ 14.313154] EXT3 FS on dm-0, internal journal[ 14.546076] loop: module loaded[ 14.827422] usbcore: registered new interface driver cdc_acm[ 14.827498] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters[ 17.415699] kjournald starting. Commit interval 5 seconds[ 17.415699] EXT3 FS on dm-4, internal journal[ 17.415834] EXT3-fs: mounted filesystem with ordered data mode.[ 17.427967] kjournald starting. Commit interval 5 seconds[ 17.428183] EXT3 FS on dm-5, internal journal[ 17.428332] EXT3-fs: mounted filesystem with ordered data mode.[ 17.439643] kjournald starting. Commit interval 5 seconds[ 17.439861] EXT3 FS on dm-1, internal journal[ 17.439989] EXT3-fs: mounted filesystem with ordered data mode.[ 17.482583] kjournald starting. Commit interval 5 seconds[ 17.482846] EXT3 FS on dm-10, internal journal[ 17.482975] EXT3-fs: mounted filesystem with ordered data mode.[ 17.508980] kjournald starting. Commit interval 5 seconds[ 17.509695] EXT3 FS on dm-2, internal journal[ 17.509823] EXT3-fs: mounted filesystem with ordered data mode.[ 17.537169] kjournald starting. Commit interval 5 seconds[ 17.537292] EXT3 FS on dm-11, internal journal[ 17.537421] EXT3-fs: mounted filesystem with ordered data mode.[ 17.568954] kjournald starting. Commit interval 5 seconds[ 17.569451] EXT3 FS on dm-12, internal journal[ 17.569579] EXT3-fs: mounted filesystem with ordered data mode.[ 17.624229] kjournald starting. Commit interval 5 seconds[ 17.624229] EXT3 FS on dm-13, internal journal[ 17.624357] EXT3-fs: mounted filesystem with ordered data mode.[ 17.752700] Adding 988020k swap on /dev/hda3. Priority:-1 extents:1 across:988020k[ 17.861426] Adding 6086648k swap on /dev/mapper/orie-swap_1. Priority:-2 extents:1 across:6086648k[ 17.892793] Adding 1048568k swap on /dev/mapper/orie-temp--swap. Priority:-3 extents:1 across:1048568k[ 17.913189] Adding 511992k swap on /dev/mapper/orie-tempSwap. Priority:-4 extents:1 across:511992k[ 20.008471] r8169: eth2: link up[ 20.008552] r8169: eth2: link up[ 21.223328] NET: Registered protocol family 10[ 21.223547] lo: Disabled Privacy Extensions[ 31.671884] eth2: no IPv6 routers present[ 41.848500] lp0: using parport0 (interrupt-driven).[ 41.867953] ppdev: user-space parallel port driver[ 47.688187] suspend: event channel 25[ 51.088720] warning: `ntpd' uses 32-bit capabilities (legacy support in use)[ 146.181660] NET: Registered protocol family 4[ 146.307870] NET: Registered protocol family 3[ 146.381294] NET: Registered protocol family 5[10078.995781] hde: DMA timeout retry[10078.995790] hde: timeout waiting for DMA[10448.891812] hde: DMA timeout retry[10448.891822] hde: timeout waiting for DMA[31131.705389] cdrom: This disc doesn't have any tracks I recognize![73151.073097] cdrom: This disc doesn't have any tracks I recognize![73435.126489] cdrom: This disc doesn't have any tracks I recognize![179244.036960] clocksource/1: Time went backwards: ret=a137ba4358fd delta=-10062945 shadow=a137a3f4da3a offset=164e81b8[179244.037037] clocksource/1: Time went backwards: ret=a137ba447cd2 delta=-10035697 shadow=a137a3f4da3a offset=164fa42a[179244.039992] clocksource/1: Time went backwards: ret=a137ba47cb84 delta=-10050457 shadow=a137a3f4da3a offset=1652f234[179244.039992] clocksource/1: Time went backwards: ret=a137ba48b61a delta=-10067331 shadow=a137a3f4da3a offset=1653ddea[179244.039992] clocksource/1: Time went backwards: ret=a137ba49e7b0 delta=-10035941 shadow=a137a3f4da3a offset=16550f28[179244.039992] clocksource/1: Time went backwards: ret=a137ba4a20a8 delta=-10056805 shadow=a137a3f4da3a offset=1655473b[179244.039992] clocksource/1: Time went backwards: ret=a137ba4cf7e2 delta=-10066137 shadow=a137a3f4da3a offset=16581e79[179244.044474] clocksource/1: Time went backwards: ret=a137baeeeb73 delta=-10119622 shadow=a137a3f4da3a offset=16fa121d[179244.051775] clocksource/1: Time went backwards: ret=a137baef7aaf delta=-10082954 shadow=a137a3f4da3a offset=16faa19a[179244.051775] clocksource/1: Time went backwards: ret=a137baf072be delta=-10019451 shadow=a137a3f4da3a offset=16fb999d[267057.744256] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended[303044.148628] ip_tables: (C) 2000-2006 Netfilter Core Team[437098.571456] __ratelimit: 63 messages suppressed[437098.571469] clocksource/0: Time went backwards: ret=18829021a86c2 delta=-10104856 shadow=18828ce573391 offset=33c39144[437098.571484] clocksource/0: Time went backwards: ret=18829021b0211 delta=-10102413 shadow=18828ce573391 offset=33c3cff7[437098.573634] clocksource/0: Time went backwards: ret=18829021cb722 delta=-10086242 shadow=18828ce573391 offset=33c58569[437098.573634] clocksource/0: Time went backwards: ret=18829021eca8e delta=-10085708 shadow=18828ce573391 offset=33c79aab[437098.573634] clocksource/0: Time went backwards: ret=18829021f842d delta=-10087697 shadow=18828ce573391 offset=33c85269[437098.573634] clocksource/0: Time went backwards: ret=188290220422d delta=-10087130 shadow=18828ce573391 offset=33c91069[437098.573634] clocksource/0: Time went backwards: ret=188290220eeaa delta=-10090743 shadow=18828ce573391 offset=33c9bce0[437098.573634] clocksource/0: Time went backwards: ret=188290221a10f delta=-10109265 shadow=18828ce573391 offset=33ca6f59[437098.573634] clocksource/0: Time went backwards: ret=1882902225473 delta=-10108714 shadow=18828ce573391 offset=33cb271d[437098.573634] clocksource/0: Time went backwards: ret=1882902231176 delta=-10102410 shadow=18828ce573391 offset=33cbdfb1