Untitled

libata version 1.11 loaded.
sata_nv version 0.6
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 10
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 10
ata1: no device found (phy stat 00000000)
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 11
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 11
ata3: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:407f
ata3: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata3: dev 0 configured for UDMA/133
scsi2 : sata_nv
ata4: no device found (phy stat 00000000)
scsi3 : sata_nv
  Vendor: ATA       Model: Maxtor 6L200M0    Rev: BANC
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sda: drive cache: write back
 sda:<3>irq 10: nobody cared!

Call Trace: <IRQ> <ffffffff8014ded0>{__report_bad_irq+48} <ffffffff8014dfa9>{note_interrupt+89}
       <ffffffff8014d902>{__do_IRQ+274} <ffffffff80110372>{do_IRQ+66}
       <ffffffff8010de69>{ret_from_intr+0}  <EOI> <ffffffff8010e30e>{kernel_thread+130}
       <ffffffff8010df99>{retint_kernel+38} <ffffffff8010ba50>{default_idle+0}
       <ffffffff8010ba70>{default_idle+32} <ffffffff8010bbc1>{cpu_idle+49}
       <ffffffff803b274a>{start_kernel+410} <ffffffff803b2216>{_sinittext+534}

handlers:
[<ffffffff88054000>] (nv_interrupt+0x0/0xe0 [sata_nv])
Disabling IRQ #10
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
 sda1 sda4 <<4>nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
 sda5<4>nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
 sda6<4>nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
 sda7<4>nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
 sda8 >
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0