Linux version 2.6.16.21-0.21-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Tue Aug 29 16:42:05 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002ff40000 (usable)
BIOS-e820: 000000002ff40000 - 000000002ff50000 (ACPI data)
BIOS-e820: 000000002ff50000 - 0000000030000000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
No mptable found.
On node 0 totalpages: 196416
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 192320 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 TOSHIB ) @ 0x000f01b0
ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x2ff40000
ACPI: FADT (v002 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x2ff40054
ACPI: BOOT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x2ff4002c
ACPI: DSDT (v001 TOSHIB 6100 0x20021015 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0xee08
Allocating PCI resources starting at 40000000 (gap: 30000000:ceda0000)
Built 1 zonelists
Kernel command line: root=/dev/hda6 vga=0x317 resume=/dev/hda7 splash=silent
bootsplash: silent mode.
Local APIC disabled by BIOS -- you can enable it with "lapic"
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1694.767 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 773160k/785664k available (1490k kernel code, 11964k reserved, 608k data, 156k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3394.11 BogoMIPS (lpj=6788238)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz stepping 04
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 2316k freed
not found!
ACPI: setting ELCR to 0200 (from 0e00)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd5ad, last bus=5
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region ee00-ee7f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region eec0-eeff claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #05 (-#08) is hidden behind transparent bridge #02 (-#05) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
PCI: Bus #09 (-#0c) is hidden behind transparent bridge #02 (-#05) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
Setting up standard PCI resources
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: fd000000-fdffffff
PREFETCH window: dbf00000-dfffffff
PCI: Bus 3, cardbus bridge: 0000:02:0a.0
IO window: 0000d000-0000d0ff
IO window: 0000d400-0000d4ff
PREFETCH window: 40000000-41ffffff
MEM window: 48000000-49ffffff
PCI: Bus 5, cardbus bridge: 0000:02:0b.0
IO window: 0000d800-0000d8ff
IO window: 0000dc00-0000dcff
PREFETCH window: 42000000-43ffffff
MEM window: 4a000000-4bffffff
PCI: Bus 9, cardbus bridge: 0000:02:0b.1
IO window: 00001c00-00001cff
IO window: 00002000-000020ff
PREFETCH window: 44000000-45ffffff
MEM window: 4c000000-4dffffff
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: fce00000-fcefffff
PREFETCH window: 40000000-45ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:02:0a.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Enabling device 0000:02:0b.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Enabling device 0000:02:0b.1 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:0b.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Simple Boot Flag at 0x7c set to 0x1
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1158564613.684:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xdc000000, mapped to 0xf0880000, using 6144k, total 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:e720
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47089 bytes,<6>...found (1024x768, 27542 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
MPC0 MPC1 LAN VIY0 VIY1 COM USB1 USB2 USB3 AMDM LID
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 156k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xcfa0-0xcfa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xcfa8-0xcfaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: FUJITSU MHV2080AH, ATA DISK drive
input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-R2102, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [THRM] (28 C)
ACPI: Fan [FAN] (off)
Attempting manual resume
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
pnp: Device 00:0b activated.
parport: PnPBIOS parport detected.
pnp: Device 00:0b disabled.
ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:0a.0 [12a3:ab01]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:0a.0, mfunc 0x01000002, devctl 0x60
i8xx TCO timer: initialized (0xee60). heartbeat=30 sec (nowayout=0)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Linux agpgart interface v0.101 (c) Dave Jones
USB Universal Host Controller Interface driver v2.3
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
Yenta: ISA IRQ mask 0x0000, PCI irq 11
Socket status: 30000010
pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
cs: IO port probe 0xd000-0xdfff: clean.
pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x45ffffff
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:0b.0 [1179:0001]
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000007
pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
cs: IO port probe 0xd000-0xdfff: clean.
pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x45ffffff
ACPI: PCI Interrupt 0000:02:0b.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:0b.1 [1179:0001]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000007
pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
cs: IO port probe 0xd000-0xdfff: clean.
pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x45ffffff
PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
pccard: PCMCIA card inserted into slot 0
cs: memory probe 0xfce00000-0xfcefffff: excluding 0xfce00000-0xfce0ffff 0xfcef0000-0xfcefffff
pcmcia: registering new device pcmcia0.0
orinoco 0.15rc3 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
intel8x0_measure_ac97_clock: measured 55315 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000efe0
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.21-0.21-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000ef80
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.21-0.21-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
orinoco_cs 0.15rc3 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
eth0: Hardware identity 0005:0004:0005:0000
eth0: Station identity 001f:0001:0008:000a
eth0: Firmware determined as Lucent/Agere 8.10
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:02:2D:56:A0:A8
eth0: Station name "HERMES I"
eth0: ready
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
eth0: index 0x01: Vcc 3.3, irq 11, io 0xd100-0xd13f
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x000018c0
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16.21-0.21-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
eth0 renamed to eth1
agpgart: Detected an Intel i845 Chipset.
usb 2-2: new full speed USB device using uhci_hcd and address 2
agpgart: AGP aperture is 256M @ 0xe0000000
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0xfceff000, irq 11, MAC addr 00:08:0D:91:BD:33
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usb 2-2: new device found, idVendor=058f, idProduct=9254
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Generic USB Hub
usb 2-2: Manufacturer: ALCOR
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
hw_random: RNG not detected
usb 2-2.2: new full speed USB device using uhci_hcd and address 3
usb 2-2.2: new device found, idVendor=0ea0, idProduct=2168
usb 2-2.2: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2.2: Product: Flash Disk
usb 2-2.2: Manufacturer: USB
usb 2-2.2: SerialNumber: 6072CB4110C0BC06
usb 2-2.2: configuration #1 chosen from 1 choice
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
dm-netlink version 0.0.2 loaded
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Vendor: TinyDisk Model: 2004-8-04 Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: device scan complete
loop: loaded (max 8 devices)
ReiserFS: hda8: found reiserfs format "3.6" with standard journal
ready
SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
ReiserFS: hda8: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda8: checking transaction log (hda8)
ReiserFS: hda8: Using r5 hash to sort names
NTFS driver 2.1.26 [Flags: R/W MODULE].
NTFS volume version 3.1.
AppArmor: AppArmor (version 2.0-19.43r6320) initialized
audit(1158564641.473:2): AppArmor (version 2.0-19.43r6320) initialized
Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1 across:1052216k
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Battery Slot [BAT2] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18
toshiba_acpi: HCI method: \_SB_.VALD.GHCI
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
IA-32 Microcode Update Driver v1.14 unregistered
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
powernow: This module only works with AMD K7 CPUs
acpi-cpufreq: CPU0 - ACPI performance management activated.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ADDRCONF(NETDEV_UP): eth0: link is not ready
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_UP): eth1: link is not ready
eth1: New link status: Disconnected (0002)
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth1: New link status: Connected (0001)
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: New link status: Disconnected (0002)
NET: Registered protocol family 17
eth0: no IPv6 routers present
eth1: no IPv6 routers present
bootsplash: status on console 0 changed to on
eth0: no IPv6 routers present
spurious 8259A interrupt: IRQ7.
eth1: New link status: Connected (0001)
eth1: New link status: Disconnected (0002)
eth1: New link status: Connected (0001)
eth1: New link status: AP Out of Range (0004)
eth1: New link status: AP In Range (0005)
eth1: New link status: AP Out of Range (0004)
eth1: New link status: AP In Range (0005)
eth1: New link status: AP Out of Range (0004)
eth1: New link status: AP In Range (0005)
eth1: New link status: AP Out of Range (0004)
eth1: New link status: AP In Range (0005)
eth1: New link status: AP Out of Range (0004)
eth1: New link status: AP In Range (0005)
eth1: New link status: AP Out of Range (0004)
eth1: New link status: AP In Range (0005)
eth1: New link status: AP Out of Range (0004)
eth1: New link status: AP In Range (0005)
eth1: New link status: AP Out of Range (0004)
eth1: New link status: AP In Range (0005)
eth1: New link status: AP Out of Range (0004)
eth1: New link status: AP In Range (0005)
eth1: New link status: AP Out of Range (0004)
eth1: New link status: AP In Range (0005)
eth1: New link status: AP Out of Range (0004)
eth1: New link status: AP In Range (0005)
eth1: New link status: AP Out of Range (0004)
eth1: New link status: AP In Range (0005)
eth1: New link status: AP Out of Range (0004)
jacques@cave:~>