rendered paste body
Section "ServerLayout"
# Screen "aticonfig Screen 1" Relative "Screen0" 1600 176
Identifier "Server Layout"
Screen "Screen0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
FontPath "tcp/boris:7100"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "type1"
Load "freetype"
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbModel" "pc104"
#Option "XkbLayout" "dvorak"
Option "XkbLayout" "en_US"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
# HorizSync 30.0 - 80.0
# VertRefresh 50.0 - 75.0
# Option "DPMS"
Identifier "Monitor0"
DisplaySize 270 338
# 1280x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 108.88 MHz
Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync
EndSection
Section "Monitor"
Identifier "aticonfig Monitor 1"
DisplaySize 294 393
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
# vendor=1002, device=4e45
Option "VRefresh2" "50 - 75"
# Option "UseFastTLS" "1"
#Option "KernelModuleParm" "agplock=0"
# Option "BackingStore" "true"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
Option "no_accel" "off"
Option "no_dri" "off"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
Option "IgnoreEDID" "off"
Option "DesktopSetup" "horizontal"
Option "HSync2" "30 - 80"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000800"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "off"
Option "FSAACustomizeMSPos" "off"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "BlockSignalsOnLock" "off"
Option "UseInternalAGPGART" "off"
Option "ForceGenericCPU" "off"
Option "DPMS"
#Option "KernelModuleParm" "0" # AGP locked user pages: enabled
Option "ForceMonitors" "notv"
Option "Mode2" "1280x1024"
# Option "PairModes" "1600x1200+1280x1024"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "ATI Graphics Adapter 1"
Driver "fglrx"
BusID "PCI:1:0:1"
Screen 1
EndSection
Section "Screen"
#Option "backingstore"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
# initial origin if mode is smaller than desktop
# Virtual 1280 1024
# Modes "1280x1024" "1024x768"
Viewport 0 0
Depth 24
Modes "1600x1200" "1280x1024" "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig Screen 1"
Device "ATI Graphics Adapter 1"
Monitor "aticonfig Monitor 1"
DefaultDepth 24
SubSection "Display"
# Viewport 1600 176
# Virtual 1280 1024
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "DRI"
# Access to OpenGL ICD is allowed for all users:
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
Mode 0666
EndSection