rendered paste body[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.32.2-powerpc (root@imac-Linux) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #1 Sat Jan 2 17:10:49 CET 2010
[ 0.000000] Found initrd at 0xc1b00000:0xc1e09000
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: Flat panel iMac
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=546, gen1=545
[ 0.000000] nvram: Active bank is: 0
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00030000
[ 0.000000] Normal 0x00030000 -> 0x00030000
[ 0.000000] HighMem 0x00030000 -> 0x00040000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00040000
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0573114, node_mem_map c0609000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 195072 pages, LIFO batch:31
[ 0.000000] HighMem zone: 512 pages used for memmap
[ 0.000000] HighMem zone: 65024 pages, LIFO batch:15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
[ 0.000000] Kernel command line: root=/dev/hda2 ro video=offb:off
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] High memory: 262144k
[ 0.000000] Memory: 1027152k/1048576k available (5388k kernel code, 20656k reserved, 260k data, 477k bss, 216k init)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffef000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfdf32000..0xff800000 : early ioremap
[ 0.000000] * 0xf1000000..0xfdf32000 : vmalloc & ioremap
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
[ 0.000000] time_init: decrementer frequency = 41.600661 MHz
[ 0.000000] time_init: processor frequency = 999.999996 MHz
[ 0.000000] clocksource: timebase mult[6026fe5] shift[22] registered
[ 0.000000] clockevent: decrementer mult[aa65746] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000142] Security Framework initialized
[ 0.000168] SELinux: Disabled at boot.
[ 0.000185] Mount-cache hash table entries: 512
[ 0.000543] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.002520] Initializing cgroup subsys ns
[ 0.002534] Initializing cgroup subsys devices
[ 0.002543] Initializing cgroup subsys freezer
[ 0.002552] Initializing cgroup subsys net_cls
[ 0.003863] regulator: core version 0.5
[ 0.003996] NET: Registered protocol family 16
[ 0.004354] MPC7450 family performance monitor hardware support registered
[ 0.004412] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42
[ 0.004447] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.004460] channel 0 bus <multibus>
[ 0.004467] channel 1 bus <multibus>
[ 0.004496] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26
[ 0.004513] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.004525] channel 0 bus <multibus>
[ 0.004546] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.004556] channel 1 bus <multibus>
[ 0.004563] channel 2 bus <multibus>
[ 0.004609] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25
[ 0.004633] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47
[ 0.004746] PCI: Probing PCI hardware
[ 0.004917] pci 0000:00:10.0: reg 10 32bit mmio: [0x91000000-0x91ffffff]
[ 0.004927] pci 0000:00:10.0: reg 14 32bit mmio pref: [0x98000000-0x9fffffff]
[ 0.004946] pci 0000:00:10.0: reg 30 32bit mmio pref: [0x90000000-0x9001ffff]
[ 0.005016] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48
[ 0.005241] pci 0001:10:12.0: reg 10 32bit mmio: [0x80084000-0x80085fff]
[ 0.005280] pci 0001:10:12.0: supports D1 D2
[ 0.005285] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.005300] pci 0001:10:12.0: PME# disabled
[ 0.005333] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
[ 0.005381] pci 0001:10:18.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.005432] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.005488] pci 0001:10:1a.0: reg 10 32bit mmio: [0x80083000-0x80083fff]
[ 0.005547] pci 0001:10:1b.0: reg 10 32bit mmio: [0x80082000-0x80082fff]
[ 0.005585] pci 0001:10:1b.0: supports D1 D2
[ 0.005590] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.005612] pci 0001:10:1b.0: PME# disabled
[ 0.005653] pci 0001:10:1b.1: reg 10 32bit mmio: [0x80081000-0x80081fff]
[ 0.005692] pci 0001:10:1b.1: supports D1 D2
[ 0.005697] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.005712] pci 0001:10:1b.1: PME# disabled
[ 0.005752] pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff]
[ 0.005791] pci 0001:10:1b.2: supports D1 D2
[ 0.005795] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.005810] pci 0001:10:1b.2: PME# disabled
[ 0.005863] irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52
[ 0.005890] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
[ 0.005913] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28
[ 0.005936] irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
[ 0.005957] irq: irq 63 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 63
[ 0.006452] pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff]
[ 0.006498] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff]
[ 0.006528] pci 0002:20:0e.0: supports D1 D2
[ 0.006533] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.006551] pci 0002:20:0e.0: PME# disabled
[ 0.006579] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
[ 0.006599] pci 0002:20:0f.0: reg 30 32bit mmio pref: [0xf5100000-0xf51fffff]
[ 0.006650] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39
[ 0.006671] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40
[ 0.006694] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41
[ 0.006967] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff]
[ 0.006974] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff]
[ 0.006980] pci_bus 0000:00: resource 2 mem: [0x90000000-0x9fffffff]
[ 0.006986] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff]
[ 0.006991] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
[ 0.006997] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
[ 0.007003] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff]
[ 0.007009] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
[ 0.008371] bio: create slab <bio-0> at 0
[ 0.008739] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
[ 0.008782] vgaarb: loaded
[ 0.009066] SCSI subsystem initialized
[ 0.009203] libata version 3.00 loaded.
[ 0.009398] usbcore: registered new interface driver usbfs
[ 0.009437] usbcore: registered new interface driver hub
[ 0.009519] usbcore: registered new device driver usb
[ 0.009830] Switching to clocksource timebase
[ 0.013718] NET: Registered protocol family 2
[ 0.013960] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.014653] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.016272] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.016696] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.016717] TCP reno registered
[ 0.016911] NET: Registered protocol family 1
[ 0.017135] Trying to unpack rootfs image as initramfs...
[ 0.152188] Freeing initrd memory: 3108k freed
[ 0.152596] Thermal assist unit not available
[ 0.153062] audit: initializing netlink socket (disabled)
[ 0.153107] type=2000 audit(1262598023.148:1): initialized
[ 0.166588] highmem bounce pool size: 64 pages
[ 0.169840] VFS: Disk quotas dquot_6.5.2
[ 0.170108] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.170923] fuse init (API version 7.13)
[ 0.171116] msgmni has been set to 1501
[ 0.171638] alg: No test for stdrng (krng)
[ 0.171679] io scheduler noop registered
[ 0.171690] io scheduler anticipatory registered
[ 0.171701] io scheduler deadline registered
[ 0.171854] io scheduler cfq registered (default)
[ 0.174827] Generic non-volatile memory driver v1.1
[ 0.176782] brd: module loaded
[ 0.176871] MacIO PCI driver attached to Intrepid chipset
[ 0.177196] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
[ 0.177420] irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
[ 0.177435] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
[ 0.177513] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22
[ 0.177528] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
[ 0.177542] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
[ 0.177629] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23
[ 0.177644] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
[ 0.177658] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
[ 0.178063] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.178382] Uniform Multi-Platform E-IDE driver
[ 0.178589] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
[ 0.178728] adb: starting probe task...
[ 0.178745] adb: finished probe task...
[ 1.197873] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
[ 1.197912] Probing IDE interface ide0...
[ 1.486045] hda: ST380011A, ATA DISK drive
[ 2.157933] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.158233] hda: UDMA/100 mode selected
[ 2.158493] ide0 at 0xf102a000-0xf102a070,0xf102a160 on irq 39
[ 3.177870] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24
[ 3.177908] Probing IDE interface ide1...
[ 3.578042] hdc: HL-DT-STDVD-RAM GSA-H55L, ATAPI CD/DVD-ROM drive
[ 3.913934] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.121162] hdc: MWDMA2 mode selected
[ 4.121510] ide1 at 0xf1026000-0xf1026070,0xf1026160 on irq 24
[ 4.121611] ide-gd driver 1.18
[ 4.121664] hda: max request size: 512KiB
[ 4.134250] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
[ 4.134416] hda: cache flushes supported
[ 4.134519] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7
[ 4.156000] ide-cd driver 5.00
[ 4.158299] ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 4.158329] Uniform CD-ROM driver Revision: 3.20
[ 10.298553] Fixed MDIO Bus: probed
[ 10.298707] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.298766] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006)
[ 10.298799] ehci_hcd 0001:10:1b.2: EHCI Host Controller
[ 10.298892] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1
[ 10.321912] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
[ 10.333868] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00
[ 10.334049] usb usb1: configuration #1 chosen from 1 choice
[ 10.334125] hub 1-0:1.0: USB hub found
[ 10.334155] hub 1-0:1.0: 5 ports detected
[ 10.334315] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.334368] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 10.334398] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 10.334425] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
[ 10.334453] ohci_hcd 0001:10:1a.0: OHCI Host Controller
[ 10.334567] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2
[ 10.334618] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
[ 10.409761] usb usb2: configuration #1 chosen from 1 choice
[ 10.409834] hub 2-0:1.0: USB hub found
[ 10.409883] hub 2-0:1.0: 2 ports detected
[ 10.409980] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002)
[ 10.410009] ohci_hcd 0001:10:1b.0: OHCI Host Controller
[ 10.410111] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3
[ 10.410154] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
[ 10.485724] usb usb3: configuration #1 chosen from 1 choice
[ 10.485797] hub 3-0:1.0: USB hub found
[ 10.485824] hub 3-0:1.0: 3 ports detected
[ 10.485937] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002)
[ 10.485965] ohci_hcd 0001:10:1b.1: OHCI Host Controller
[ 10.486058] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
[ 10.486097] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
[ 10.561729] usb usb4: configuration #1 chosen from 1 choice
[ 10.561802] hub 4-0:1.0: USB hub found
[ 10.561828] hub 4-0:1.0: 2 ports detected
[ 10.561943] uhci_hcd: USB Universal Host Controller Interface driver
[ 10.562204] mice: PS/2 mouse device common for all mice
[ 10.562328] PowerMac i2c bus pmu 2 registered
[ 10.562376] PowerMac i2c bus pmu 1 registered
[ 10.562421] PowerMac i2c bus mac-io 0 registered
[ 10.562465] PowerMac i2c bus uni-n 1 registered
[ 10.562551] PowerMac i2c bus uni-n 0 registered
[ 10.563237] TCP cubic registered
[ 10.563254] NET: Registered protocol family 17
[ 10.563488] registered taskstats version 1
[ 10.563924] input: PMU as /devices/virtual/input/input1
[ 10.563958] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 10.563998] Freeing unused kernel memory: 216k init
[ 10.997985] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 11.077315] Linux agpgart interface v0.103
[ 11.135739] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[ 11.136808] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 11.137603] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 11.247577] [drm] Initialized drm 1.1.0 20060810
[ 11.260783] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
[ 11.329080] PHY ID: 4061e4, addr: 0
[ 11.330592] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:ba:d4:9a
[ 11.330625] eth0: Found BCM5221 PHY
[ 11.330709] ohci1394 0002:20:0e.0: enabling device (0000 -> 0002)
[ 11.401917] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 11.419655] [drm] nouveau 0000:00:10.0: Detected an NV10 generation card (0x018900a3)
[ 11.419813] [drm] nouveau 0000:00:10.0: OF bios successfully copied (4027 bytes)
[ 11.419922] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PROM
[ 11.419948] [drm] nouveau 0000:00:10.0: ... BIOS signature not found
[ 11.419961] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PRAMIN
[ 11.452079] [drm] nouveau 0000:00:10.0: ... BIOS checksum invalid
[ 11.452103] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PCIROM
[ 11.452367] usb 2-1: configuration #1 chosen from 1 choice
[ 11.472422] [drm] nouveau 0000:00:10.0: ... BIOS signature not found
[ 11.472455] [drm] nouveau 0000:00:10.0: Using BIOS image from PRAMIN
[ 11.504883] [drm] nouveau 0000:00:10.0: BMP BIOS found
[ 11.504905] [drm] nouveau 0000:00:10.0: BMP version 5.38
[ 11.504920] [drm] nouveau 0000:00:10.0: Bios version 04.18.20.19
[ 11.504937] [drm] nouveau 0000:00:10.0: Found Display Configuration Block version 2.2
[ 11.504958] [drm] nouveau 0000:00:10.0: Raw DCB entry 0: 01000123 00000004
[ 11.504975] [drm] nouveau 0000:00:10.0: Raw DCB entry 1: 02010200 11b088b8
[ 11.504990] [drm] nouveau 0000:00:10.0: Raw DCB entry 2: 02010201 11b00703
[ 11.505043] [drm] nouveau 0000:00:10.0: Loading NV17 power sequencing microcode
[ 11.505063] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 0 at offset 0x030E
[ 11.505133] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 1 at offset 0x0454
[ 11.505167] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 2 at offset 0x077A
[ 11.521907] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 3 at offset 0x0959
[ 11.521953] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 4 at offset 0x0976
[ 11.521974] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 5 at offset 0x0993
[ 11.545918] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 6 at offset 0x0AB9
[ 11.554015] [TTM] Zone kernel: Available graphics memory: 384550 kiB.
[ 11.554039] [TTM] Zone highmem: Available graphics memory: 515622 kiB.
[ 11.554077] [drm] nouveau 0000:00:10.0: 32 MiB VRAM
[ 11.556737] [drm] nouveau 0000:00:10.0: 64 MiB GART (aperture)
[ 11.556923] [drm] nouveau 0000:00:10.0: Allocating FIFO number 0
[ 11.557551] [drm] nouveau 0000:00:10.0: nouveau_channel_alloc: initialised FIFO 0
[ 11.557594] [drm] nouveau 0000:00:10.0: Initial CRTC_OWNER is 0
[ 11.557717] [drm] nouveau 0000:00:10.0: Detected a LVDS connector
[ 11.656403] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 11.656604] [drm] nouveau 0000:00:10.0: Detected a VGA connector
[ 11.656979] [drm] nouveau 0000:00:10.0: Detected a TV connector
[ 11.658313] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on lvds encoder (output 0)
[ 11.658342] [drm] nouveau 0000:00:10.0: Calling LVDS script 1:
[ 11.658358] [drm] nouveau 0000:00:10.0: Calling LVDS script 6:
[ 11.658372] [drm] nouveau 0000:00:10.0: 0x0EA6: Parsing digital output script table
[ 11.870578] usb 3-1: configuration #1 chosen from 1 choice
[ 11.913945] usbcore: registered new interface driver hiddev
[ 11.921306] input: Logitech USB Optical Mouse as /devices/pci0001:10/0001:10:1b.0/usb3/3-1/3-1:1.0/input/input2
[ 11.921751] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0001:10:1b.0-1/input0
[ 11.921852] usbcore: registered new interface driver usbhid
[ 11.922259] usbhid: v2.6:USB HID core driver
[ 12.161882] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on vga encoder (output 1)
[ 12.161920] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on TV encoder (output 2)
[ 12.181882] usb 3-2: new full speed USB device using ohci_hcd and address 3
[ 12.241874] [drm] nouveau 0000:00:10.0: Load detected on output B
[ 12.242137] [drm] nouveau 0000:00:10.0: allocated 1024x768 fb: 0x9000, bo efbfac00
[ 12.242982] Console: switching to colour frame buffer device 90x36
[ 12.243072] [drm] LVDS-7: set mode 1024x768 2e
[ 12.433213] [drm] nouveau 0000:00:10.0: Output LVDS-1 is running on CRTC 0 using output A
[ 12.433219] [drm] nouveau 0000:00:10.0: Calling LVDS script 2:
[ 12.433226] [drm] nouveau 0000:00:10.0: 0x0C5F: Parsing digital output script table
[ 12.449912] [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on lvds encoder (output 0)
[ 12.449920] [drm] nouveau 0000:00:10.0: Calling LVDS script 5:
[ 12.449926] [drm] nouveau 0000:00:10.0: 0x0D14: Parsing digital output script table
[ 12.449947] [drm] nouveau 0000:00:10.0: Output LVDS-1 is running on CRTC 0 using output A
[ 12.450003] [drm] TV-9: set mode 720x576 2f
[ 12.640179] [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on TV encoder (output 2)
[ 12.640190] [drm] nouveau 0000:00:10.0: Output TV-1 is running on CRTC 1 using output B
[ 12.643662] fb0: nouveaufb frame buffer device
[ 12.643667] registered panic notifier
[ 12.644820] [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:10.0 on minor 0
[ 12.730585] usb 3-2: configuration #1 chosen from 1 choice
[ 12.733627] hub 3-2:1.0: USB hub found
[ 12.736279] hub 3-2:1.0: 3 ports detected
[ 12.842176] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000a95fffebad49a]
[ 13.035530] usb 3-2.3: new full speed USB device using ohci_hcd and address 4
[ 13.150414] usb 3-2.3: configuration #1 chosen from 1 choice
[ 13.162999] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input3
[ 13.169897] generic-usb 0003:05AC:020C.0002: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-2.3/input0
[ 13.185318] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-2/3-2.3/3-2.3:1.1/input/input4
[ 13.188190] generic-usb 0003:05AC:020C.0003: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-2.3/input1
[ 13.301544] PM: Starting manual resume from disk
[ 13.333240] EXT4-fs (hda2): INFO: recovery required on readonly filesystem
[ 13.333813] EXT4-fs (hda2): write access will be enabled during recovery
[ 13.726039] eth0: Link is up at 100 Mbps, full-duplex.
[ 14.209378] EXT4-fs (hda2): recovery complete
[ 14.225067] EXT4-fs (hda2): mounted filesystem with ordered data mode
[ 16.124609] Adding 1074208k swap on /dev/hda4. Priority:-1 extents:1 across:1074208k
[ 16.574840] udev: starting version 147
[ 17.566823] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
[ 17.595244] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
[ 17.724756] cfg80211: Calling CRDA to update world regulatory domain
[ 17.745613] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 17.747745] Bluetooth: Core ver 2.15
[ 17.748160] NET: Registered protocol family 31
[ 17.748166] Bluetooth: HCI device and connection manager initialized
[ 17.748174] Bluetooth: HCI socket layer initialized
[ 17.760287] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 17.760447] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
[ 17.763124] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
[ 18.051600] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 18.052721] usbcore: registered new interface driver btusb
[ 18.112358] b43legacy-phy0: Broadcom 4306 WLAN found
[ 18.136287] b43legacy-phy0 debug: Found PHY: Analog 1, Type 2, Revision 1
[ 18.136318] b43legacy-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
[ 18.169946] b43legacy-phy0 debug: Radio initialized
[ 18.200089] apm_emu: PMU APM Emulation initialized.
[ 18.620090] cfg80211: World regulatory domain updated:
[ 18.620104] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.620111] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.620117] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.620123] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.620129] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.620136] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.705912] phy0: Selected rate control algorithm 'minstrel'
[ 18.706604] Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
[ 18.897799] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.302407] irq: irq 30 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30
[ 19.302449] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
[ 19.302470] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31
[ 19.367126] snd-aoa-fabric-layout: Using direct GPIOs
[ 19.367253] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61
[ 19.367269] irq: irq 50 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 50
[ 19.413263] snd-aoa-codec-tas: found 'deq' node
[ 19.415740] snd-aoa-fabric-layout: can use this codec
[ 19.481285] snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/deq@6a
[ 19.811339] Bluetooth: L2CAP ver 2.14
[ 19.811350] Bluetooth: L2CAP socket layer initialized
[ 20.417777] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.417789] Bluetooth: BNEP filters: protocol multicast
[ 20.599542] Bridge firewalling registered
[ 20.856139] Bluetooth: SCO (Voice Link) ver 0.6
[ 20.856151] Bluetooth: SCO socket layer initialized
[ 21.164250] Bluetooth: RFCOMM TTY layer initialized
[ 21.164266] Bluetooth: RFCOMM socket layer initialized
[ 21.164270] Bluetooth: RFCOMM ver 1.11
[ 24.633876] b43legacy ssb0:0: firmware: requesting b43legacy/ucode4.fw
[ 24.899703] b43legacy ssb0:0: firmware: requesting b43legacy/pcm4.fw
[ 25.049649] b43legacy ssb0:0: firmware: requesting b43legacy/b0g0initvals2.fw
[ 25.281892] b43legacy-phy0: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27)
[ 25.346423] b43legacy-phy0 debug: Chip initialized
[ 25.346946] b43legacy-phy0 debug: 30-bit DMA initialized
[ 25.349071] Registered led device: b43legacy-phy0::tx
[ 25.349803] Registered led device: b43legacy-phy0::rx
[ 25.353981] Registered led device: b43legacy-phy0::radio
[ 25.354046] b43legacy-phy0 debug: Wireless interface started
[ 25.370282] b43legacy-phy0 debug: Adding Interface type 2
[ 25.392845] eth0: Link is up at 100 Mbps, full-duplex.
[ 25.392856] eth0: Pause is disabled
[ 26.721928] [drm] nouveau 0000:00:10.0: Load detected on output B
[ 26.829959] [drm] nouveau 0000:00:10.0: Load detected on output B
[ 27.115882] [drm] nouveau 0000:00:10.0: Allocating FIFO number 1
[ 27.116889] [drm] nouveau 0000:00:10.0: nouveau_channel_alloc: initialised FIFO 1
[ 27.226530] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on lvds encoder (output 0)
[ 27.226543] [drm] nouveau 0000:00:10.0: Calling LVDS script 6:
[ 27.226552] [drm] nouveau 0000:00:10.0: 0x0D7A: Parsing digital output script table
[ 27.643925] NET: Registered protocol family 10
[ 27.644775] lo: Disabled Privacy Extensions
[ 27.648077] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.760204] [drm] LVDS-7: set mode 1024x768 31
[ 27.950218] [drm] nouveau 0000:00:10.0: Output LVDS-1 is running on CRTC 0 using output A
[ 27.950226] [drm] nouveau 0000:00:10.0: Calling LVDS script 2:
[ 27.950233] [drm] nouveau 0000:00:10.0: 0x0C5F: Parsing digital output script table
[ 27.970105] [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on lvds encoder (output 0)
[ 27.970120] [drm] nouveau 0000:00:10.0: Calling LVDS script 5:
[ 27.970126] [drm] nouveau 0000:00:10.0: 0x0D14: Parsing digital output script table
[ 27.970151] [drm] nouveau 0000:00:10.0: Output LVDS-1 is running on CRTC 0 using output A
[ 27.970281] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on TV encoder (output 2)
[ 27.980182] [drm] TV-9: set mode 1024x768 32
[ 28.170230] [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on TV encoder (output 2)
[ 28.170240] [drm] nouveau 0000:00:10.0: Output TV-1 is running on CRTC 1 using output B
[ 29.049911] hda: host max PIO4 wanted PIO0 selected PIO0
[ 30.291823] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
[ 30.291840] hda: task_no_data_intr: error=0x04 { DriveStatusError }
[ 30.291849] hda: possibly failed opcode: 0xef
[ 36.489877] [drm] nouveau 0000:00:10.0: Load detected on output B
[ 36.589876] [drm] nouveau 0000:00:10.0: Load detected on output B
[ 36.697869] [drm] nouveau 0000:00:10.0: Load detected on output B
[ 38.517902] eth0: no IPv6 routers present
[ 64.454023] [drm] nouveau 0000:00:10.0: Load detected on output B
[ 64.762068] [drm] nouveau 0000:00:10.0: Load detected on output B
[ 64.897934] [drm] nouveau 0000:00:10.0: Load detected on output B
[ 124.154331] lp: driver loaded but no devices found
[ 124.194502] ppdev: user-space parallel port driver