rendered paste body[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.31-14-powerpc (buildd@adare) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu Fri Oct 16 14:11:44 UTC 2009 (Ubuntu 2.6.31-14.48-powerpc)
[ 0.000000] Found initrd at 0xc1c00000:0xc23ce000
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: Flat panel iMac
[ 0.000000] console [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=546, gen1=545
[ 0.000000] nvram: Active bank is: 0
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00030000
[ 0.000000] Normal 0x00030000 -> 0x00030000
[ 0.000000] HighMem 0x00030000 -> 0x00040000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00040000
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c05f0ac4, node_mem_map c0685000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 195072 pages, LIFO batch:31
[ 0.000000] HighMem zone: 512 pages used for memmap
[ 0.000000] HighMem zone: 65024 pages, LIFO batch:15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
[ 0.000000] Kernel command line: root=/dev/hda2 ro quiet splash video=ofonly
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] High memory: 262144k
[ 0.000000] Memory: 1021776k/1048576k available (5876k kernel code, 26036k reserved, 224k data, 478k bss, 228k init)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffef000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfdf32000..0xff800000 : early ioremap
[ 0.000000] * 0xf1000000..0xfdf32000 : vmalloc & ioremap
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:512
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
[ 0.000000] time_init: decrementer frequency = 41.600661 MHz
[ 0.000000] time_init: processor frequency = 999.999996 MHz
[ 0.000000] clocksource: timebase mult[6026fe5] shift[22] registered
[ 0.000000] clockevent: decrementer mult[aa65746] shift[32] cpu[0]
[ 0.000083] Console: colour dummy device 80x25
[ 0.000091] console handover: boot [udbg0] -> real [tty0]
[ 0.000138] Security Framework initialized
[ 0.000197] AppArmor: AppArmor initialized
[ 0.000212] Mount-cache hash table entries: 512
[ 0.000559] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.002551] Initializing cgroup subsys ns
[ 0.002561] Initializing cgroup subsys devices
[ 0.002567] Initializing cgroup subsys freezer
[ 0.002572] Initializing cgroup subsys net_cls
[ 0.003833] regulator: core version 0.5
[ 0.003965] NET: Registered protocol family 16
[ 0.004334] MPC7450 family performance monitor hardware support registered
[ 0.004381] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42
[ 0.004418] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.004425] channel 0 bus <multibus>
[ 0.004429] channel 1 bus <multibus>
[ 0.004456] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26
[ 0.004473] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.004479] channel 0 bus <multibus>
[ 0.004496] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.004501] channel 1 bus <multibus>
[ 0.004505] channel 2 bus <multibus>
[ 0.004547] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25
[ 0.004572] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47
[ 0.004685] PCI: Probing PCI hardware
[ 0.004854] pci 0000:00:10.0: reg 10 32bit mmio: [0x91000000-0x91ffffff]
[ 0.004864] pci 0000:00:10.0: reg 14 32bit mmio: [0x98000000-0x9fffffff]
[ 0.004883] pci 0000:00:10.0: reg 30 32bit mmio: [0x90000000-0x9001ffff]
[ 0.004953] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48
[ 0.005181] pci 0001:10:12.0: reg 10 32bit mmio: [0x80084000-0x80085fff]
[ 0.005221] pci 0001:10:12.0: supports D1 D2
[ 0.005226] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.005234] pci 0001:10:12.0: PME# disabled
[ 0.005263] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
[ 0.005312] pci 0001:10:18.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.005363] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.005420] pci 0001:10:1a.0: reg 10 32bit mmio: [0x80083000-0x80083fff]
[ 0.005478] pci 0001:10:1b.0: reg 10 32bit mmio: [0x80082000-0x80082fff]
[ 0.005517] pci 0001:10:1b.0: supports D1 D2
[ 0.005522] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.005529] pci 0001:10:1b.0: PME# disabled
[ 0.005563] pci 0001:10:1b.1: reg 10 32bit mmio: [0x80081000-0x80081fff]
[ 0.005602] pci 0001:10:1b.1: supports D1 D2
[ 0.005606] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.005613] pci 0001:10:1b.1: PME# disabled
[ 0.005647] pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff]
[ 0.005686] pci 0001:10:1b.2: supports D1 D2
[ 0.005691] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.005697] pci 0001:10:1b.2: PME# disabled
[ 0.005743] irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52
[ 0.005771] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
[ 0.005794] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28
[ 0.005818] irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
[ 0.005839] irq: irq 63 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 63
[ 0.006337] pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff]
[ 0.006383] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff]
[ 0.006414] pci 0002:20:0e.0: supports D1 D2
[ 0.006419] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.006425] pci 0002:20:0e.0: PME# disabled
[ 0.006446] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
[ 0.006467] pci 0002:20:0f.0: reg 30 32bit mmio: [0xf5100000-0xf51fffff]
[ 0.006518] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39
[ 0.006540] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40
[ 0.006563] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41
[ 0.006832] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff]
[ 0.006839] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff]
[ 0.006845] pci_bus 0000:00: resource 2 mem: [0x90000000-0x9fffffff]
[ 0.006851] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff]
[ 0.006857] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
[ 0.006863] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
[ 0.006869] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff]
[ 0.006875] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
[ 0.008263] bio: create slab <bio-0> at 0
[ 0.008849] SCSI subsystem initialized
[ 0.008964] libata version 3.00 loaded.
[ 0.009168] usbcore: registered new interface driver usbfs
[ 0.009193] usbcore: registered new interface driver hub
[ 0.009264] usbcore: registered new device driver usb
[ 0.012129] Switched to high resolution mode on CPU 0
[ 0.014195] AppArmor: AppArmor Filesystem Enabled
[ 0.014266] NET: Registered protocol family 2
[ 0.014437] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.015171] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.016823] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.017232] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.017238] TCP reno registered
[ 0.017463] NET: Registered protocol family 1
[ 0.017630] Trying to unpack rootfs image as initramfs...
[ 0.383413] Freeing initrd memory: 7992k freed
[ 0.384264] Thermal assist unit not available
[ 0.384469] setup_kcore: restrict size=3fffffff
[ 0.384771] audit: initializing netlink socket (disabled)
[ 0.384802] type=2000 audit(1262530987.384:1): initialized
[ 0.398629] highmem bounce pool size: 64 pages
[ 0.401954] VFS: Disk quotas dquot_6.5.2
[ 0.402109] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.402905] fuse init (API version 7.12)
[ 0.403099] msgmni has been set to 1500
[ 0.403592] alg: No test for stdrng (krng)
[ 0.403629] io scheduler noop registered
[ 0.403634] io scheduler anticipatory registered
[ 0.403638] io scheduler deadline registered
[ 0.403764] io scheduler cfq registered (default)
[ 0.404068] Using unsupported 1024x768 NVDA,Display-A at 98004000, depth=8, pitch=1024
[ 0.416721] Console: switching to colour frame buffer device 128x48
[ 0.428967] fb0: Open Firmware frame buffer device on /pci@f0000000/NVDA,Parent@10/NVDA,Display-A@0
[ 0.431624] Generic non-volatile memory driver v1.1
[ 0.433589] brd: module loaded
[ 0.433661] MacIO PCI driver attached to Intrepid chipset
[ 0.434000] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
[ 0.434196] irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
[ 0.434212] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
[ 0.434279] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22
[ 0.434294] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
[ 0.434309] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
[ 0.434394] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23
[ 0.434410] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
[ 0.434424] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
[ 0.434748] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.435050] Uniform Multi-Platform E-IDE driver
[ 0.435166] adb: starting probe task...
[ 0.435178] adb: finished probe task...
[ 0.435346] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
[ 1.452097] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
[ 1.452130] Probing IDE interface ide0...
[ 1.740276] hda: ST380011A, ATA DISK drive
[ 2.412187] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.412395] hda: UDMA/100 mode selected
[ 2.412679] ide0 at 0xf102a000-0xf102a070,0xf102a160 on irq 39
[ 3.432095] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24
[ 3.432120] Probing IDE interface ide1...
[ 3.832273] hdc: HL-DT-STDVD-RAM GSA-H55L, ATAPI CD/DVD-ROM drive
[ 4.168152] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.376125] hdc: MWDMA2 mode selected
[ 4.376484] ide1 at 0xf1026000-0xf1026070,0xf1026160 on irq 24
[ 4.376578] ide-gd driver 1.18
[ 4.376622] hda: max request size: 512KiB
[ 4.388495] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
[ 4.388643] hda: cache flushes supported
[ 4.388753] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7
[ 4.412963] ide-cd driver 5.00
[ 4.415197] ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 4.415211] Uniform CD-ROM driver Revision: 3.20
[ 10.568810] Fixed MDIO Bus: probed
[ 10.568952] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.569001] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006)
[ 10.569026] ehci_hcd 0001:10:1b.2: EHCI Host Controller
[ 10.569124] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1
[ 10.592145] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
[ 10.604114] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00
[ 10.604337] usb usb1: configuration #1 chosen from 1 choice
[ 10.604404] hub 1-0:1.0: USB hub found
[ 10.604427] hub 1-0:1.0: 5 ports detected
[ 10.604563] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.604606] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 10.604629] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 10.604648] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
[ 10.604669] ohci_hcd 0001:10:1a.0: OHCI Host Controller
[ 10.604759] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2
[ 10.604797] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
[ 10.679979] usb usb2: configuration #1 chosen from 1 choice
[ 10.680037] hub 2-0:1.0: USB hub found
[ 10.680058] hub 2-0:1.0: 2 ports detected
[ 10.680163] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002)
[ 10.680182] ohci_hcd 0001:10:1b.0: OHCI Host Controller
[ 10.680278] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3
[ 10.680303] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
[ 10.755940] usb usb3: configuration #1 chosen from 1 choice
[ 10.755995] hub 3-0:1.0: USB hub found
[ 10.756016] hub 3-0:1.0: 3 ports detected
[ 10.756128] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002)
[ 10.756148] ohci_hcd 0001:10:1b.1: OHCI Host Controller
[ 10.756228] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
[ 10.756254] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
[ 10.831947] usb usb4: configuration #1 chosen from 1 choice
[ 10.832016] hub 4-0:1.0: USB hub found
[ 10.832037] hub 4-0:1.0: 2 ports detected
[ 10.832160] uhci_hcd: USB Universal Host Controller Interface driver
[ 10.832376] mice: PS/2 mouse device common for all mice
[ 10.832466] PowerMac i2c bus pmu 2 registered
[ 10.832505] PowerMac i2c bus pmu 1 registered
[ 10.832580] PowerMac i2c bus mac-io 0 registered
[ 10.832621] PowerMac i2c bus uni-n 1 registered
[ 10.832687] PowerMac i2c bus uni-n 0 registered
[ 10.833652] TCP cubic registered
[ 10.833662] NET: Registered protocol family 17
[ 10.833920] registered taskstats version 1
[ 10.834228] input: PMU as /devices/virtual/input/input1
[ 10.834248] /build/buildd/linux-2.6.31/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 10.834283] Freeing unused kernel memory: 228k init
[ 11.120169] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 11.312273] Linux agpgart interface v0.103
[ 11.357537] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[ 11.357699] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 8
[ 11.357811] agpgart-uninorth 0000:00:0b.0: AGP aperture is 32M @ 0x0
[ 11.371230] usb 2-1: configuration #1 chosen from 1 choice
[ 11.545057] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
[ 11.548560] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
[ 11.594679] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
[ 11.700231] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 11.708489] PHY ID: 4061e4, addr: 0
[ 11.709619] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:ba:d4:9a
[ 11.709627] eth0: Found BCM5221 PHY
[ 11.710795] ohci1394 0002:20:0e.0: enabling device (0000 -> 0002)
[ 11.766156] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 11.920376] usb 3-1: configuration #1 chosen from 1 choice
[ 11.958018] usbcore: registered new interface driver hiddev
[ 11.965027] input: Logitech USB Optical Mouse as /devices/pci0001:10/0001:10:1b.0/usb3/3-1/3-1:1.0/input/input2
[ 11.965180] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0001:10:1b.0-1/input0
[ 11.965222] usbcore: registered new interface driver usbhid
[ 11.965228] usbhid: v2.6:USB HID core driver
[ 12.216129] usb 3-2: new full speed USB device using ohci_hcd and address 3
[ 12.461063] usb 3-2: configuration #1 chosen from 1 choice
[ 12.463990] hub 3-2:1.0: USB hub found
[ 12.467824] hub 3-2:1.0: 3 ports detected
[ 12.813955] usb 3-2.3: new full speed USB device using ohci_hcd and address 4
[ 12.837785] PM: Starting manual resume from disk
[ 12.869234] EXT4-fs (hda2): INFO: recovery required on readonly filesystem
[ 12.869249] EXT4-fs (hda2): write access will be enabled during recovery
[ 12.879023] EXT4-fs (hda2): barriers enabled
[ 12.932876] usb 3-2.3: configuration #1 chosen from 1 choice
[ 12.944763] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input3
[ 12.944903] generic-usb 0003:05AC:020C.0002: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-2.3/input0
[ 12.959761] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-2/3-2.3/3-2.3:1.1/input/input4
[ 12.959892] generic-usb 0003:05AC:020C.0003: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-2.3/input1
[ 13.044350] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000a95fffebad49a]
[ 13.702539] kjournald2 starting: pid 321, dev hda2:8, commit interval 5 seconds
[ 13.702585] EXT4-fs (hda2): delayed allocation enabled
[ 13.702592] EXT4-fs: file extents enabled
[ 13.705977] EXT4-fs: mballoc enabled
[ 13.706021] EXT4-fs (hda2): recovery complete
[ 13.713227] EXT4-fs (hda2): mounted filesystem with ordered data mode
[ 14.108265] eth0: Link is up at 100 Mbps, full-duplex.
[ 14.465009] type=1505 audit(1262531001.464:2): operation="profile_load" pid=344 name=/usr/share/gdm/guest-session/Xsession
[ 14.478709] type=1505 audit(1262531001.476:3): operation="profile_load" pid=345 name=/sbin/dhclient3
[ 14.479612] type=1505 audit(1262531001.476:4): operation="profile_load" pid=345 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 14.480146] type=1505 audit(1262531001.480:5): operation="profile_load" pid=345 name=/usr/lib/connman/scripts/dhclient-script
[ 14.542953] type=1505 audit(1262531001.540:6): operation="profile_load" pid=346 name=/usr/bin/evince
[ 14.558412] type=1505 audit(1262531001.556:7): operation="profile_load" pid=346 name=/usr/bin/evince-previewer
[ 14.567805] type=1505 audit(1262531001.564:8): operation="profile_load" pid=346 name=/usr/bin/evince-thumbnailer
[ 14.600287] type=1505 audit(1262531001.600:9): operation="profile_load" pid=348 name=/usr/lib/cups/backend/cups-pdf
[ 14.601442] type=1505 audit(1262531001.600:10): operation="profile_load" pid=348 name=/usr/sbin/cupsd
[ 14.623302] type=1505 audit(1262531001.620:11): operation="profile_load" pid=349 name=/usr/sbin/tcpdump
[ 15.679689] Adding 1074208k swap on /dev/hda4. Priority:-1 extents:1 across:1074208k
[ 16.431441] udev: starting version 147
[ 17.419735] Bluetooth: Core ver 2.15
[ 17.419881] NET: Registered protocol family 31
[ 17.419886] Bluetooth: HCI device and connection manager initialized
[ 17.419894] Bluetooth: HCI socket layer initialized
[ 17.501267] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 17.550975] cfg80211: Calling CRDA to update world regulatory domain
[ 17.704230] b43legacy-phy0: Broadcom 4306 WLAN found
[ 17.717275] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 17.717410] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
[ 17.717550] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
[ 17.732110] b43legacy-phy0 debug: Found PHY: Analog 1, Type 2, Revision 1
[ 17.732142] b43legacy-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
[ 17.752761] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 17.753014] usbcore: registered new interface driver btusb
[ 17.758635] b43legacy-phy0 debug: Radio initialized
[ 18.020419] [drm] Initialized drm 1.1.0 20060810
[ 18.536795] cfg80211: World regulatory domain updated:
[ 18.536811] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.536818] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.536825] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.536831] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.536837] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.536844] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.938982] nouveau 0000:00:10.0: Detected an NV17 generation card (0x018900a3)
[ 18.939107] nouveau 0000:00:10.0: OF bios successfully copied (4027 bytes)
[ 18.939115] [drm] Initialized nouveau 0.0.15 v2.6.31-rc6-539-ged53f9fcabd42f004 for 0000:00:10.0 on minor 0
[ 19.179980] phy0: Selected rate control algorithm 'minstrel'
[ 19.180686] Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
[ 19.942103] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa.
[ 20.134575] irq: irq 30 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30
[ 20.134617] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
[ 20.134638] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31
[ 20.198793] snd-aoa-fabric-layout: Using direct GPIOs
[ 20.198914] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61
[ 20.198931] irq: irq 50 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 50
[ 20.244719] snd-aoa-codec-tas: found 'deq' node
[ 20.244789] snd-aoa-fabric-layout: can use this codec
[ 20.277559] apm_emu: PMU APM Emulation initialized.
[ 20.320956] snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/deq@6a
[ 20.384341] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 34.887564] EXT4-fs (hda2): internal journal on hda2:8
[ 36.514913] type=1505 audit(1262531023.511:12): operation="profile_replace" pid=853 name=/usr/share/gdm/guest-session/Xsession
[ 36.521906] type=1505 audit(1262531023.519:13): operation="profile_replace" pid=854 name=/sbin/dhclient3
[ 36.522836] type=1505 audit(1262531023.519:14): operation="profile_replace" pid=854 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 36.523348] type=1505 audit(1262531023.519:15): operation="profile_replace" pid=854 name=/usr/lib/connman/scripts/dhclient-script
[ 36.544540] type=1505 audit(1262531023.543:16): operation="profile_replace" pid=855 name=/usr/bin/evince
[ 36.563704] type=1505 audit(1262531023.559:17): operation="profile_replace" pid=855 name=/usr/bin/evince-previewer
[ 36.580939] type=1505 audit(1262531023.579:18): operation="profile_replace" pid=855 name=/usr/bin/evince-thumbnailer
[ 36.602585] type=1505 audit(1262531023.599:19): operation="profile_replace" pid=858 name=/usr/lib/cups/backend/cups-pdf
[ 36.603777] type=1505 audit(1262531023.599:20): operation="profile_replace" pid=858 name=/usr/sbin/cupsd
[ 36.612875] type=1505 audit(1262531023.611:21): operation="profile_replace" pid=859 name=/usr/sbin/tcpdump
[ 37.392298] b43legacy ssb0:0: firmware: requesting b43legacy/ucode4.fw
[ 37.529853] b43legacy ssb0:0: firmware: requesting b43legacy/pcm4.fw
[ 37.575735] b43legacy ssb0:0: firmware: requesting b43legacy/b0g0initvals2.fw
[ 37.784323] b43legacy-phy0: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27)
[ 37.848664] b43legacy-phy0 debug: Chip initialized
[ 37.849174] b43legacy-phy0 debug: 30-bit DMA initialized
[ 37.849429] Registered led device: b43legacy-phy0::tx
[ 37.849468] Registered led device: b43legacy-phy0::rx
[ 37.849504] Registered led device: b43legacy-phy0::radio
[ 37.849555] b43legacy-phy0 debug: Wireless interface started
[ 37.849598] b43legacy-phy0 debug: Adding Interface type 2
[ 37.884708] eth0: Link is up at 100 Mbps, full-duplex.
[ 37.884719] eth0: Pause is disabled
[ 39.180221] Process Xorg (pid:905) mapped non-existing PCI legacy memory for 00000:00
[ 40.302515] NET: Registered protocol family 10
[ 40.303370] lo: Disabled Privacy Extensions
[ 40.304835] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 40.868836] hda: host max PIO4 wanted PIO0 selected PIO0
[ 41.945433] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
[ 41.945451] hda: task_no_data_intr: error=0x04 { DriveStatusError }
[ 41.945460] hda: possibly failed opcode: 0xef
[ 43.484952] Bluetooth: L2CAP ver 2.13
[ 43.484960] Bluetooth: L2CAP socket layer initialized
[ 43.588948] lp: driver loaded but no devices found
[ 43.610204] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 43.610213] Bluetooth: BNEP filters: protocol multicast
[ 43.852512] Bridge firewalling registered
[ 43.915124] ppdev: user-space parallel port driver
[ 44.412366] Bluetooth: SCO (Voice Link) ver 0.6
[ 44.412376] Bluetooth: SCO socket layer initialized
[ 44.768494] Bluetooth: RFCOMM TTY layer initialized
[ 44.768508] Bluetooth: RFCOMM socket layer initialized
[ 44.768513] Bluetooth: RFCOMM ver 1.11
[ 50.540130] eth0: no IPv6 routers present