rendered paste body[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.32.2-powerpc (root@imac-Linux) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #1 Sat Jan 2 17:10:49 CET 2010
[ 0.000000] Found initrd at 0xc1b00000:0xc1e09000
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: Flat panel iMac
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /pci@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=546, gen1=545
[ 0.000000] nvram: Active bank is: 0
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00030000
[ 0.000000] Normal 0x00030000 -> 0x00030000
[ 0.000000] HighMem 0x00030000 -> 0x00040000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00040000
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0573114, node_mem_map c0609000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 195072 pages, LIFO batch:31
[ 0.000000] HighMem zone: 512 pages used for memmap
[ 0.000000] HighMem zone: 65024 pages, LIFO batch:15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
[ 0.000000] Kernel command line: root=/dev/hda2 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] High memory: 262144k
[ 0.000000] Memory: 1027152k/1048576k available (5388k kernel code, 20656k reserved, 260k data, 477k bss, 216k init)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffef000..0xfffff000 : fixmap
[ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.000000] * 0xfdf32000..0xff800000 : early ioremap
[ 0.000000] * 0xf1000000..0xfdf32000 : vmalloc & ioremap
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
[ 0.000000] time_init: decrementer frequency = 41.600571 MHz
[ 0.000000] time_init: processor frequency = 999.999996 MHz
[ 0.000000] clocksource: timebase mult[60270bf] shift[22] registered
[ 0.000000] clockevent: decrementer mult[aa655c3] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000142] Security Framework initialized
[ 0.000168] SELinux: Disabled at boot.
[ 0.000185] Mount-cache hash table entries: 512
[ 0.000543] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.002522] Initializing cgroup subsys ns
[ 0.002535] Initializing cgroup subsys devices
[ 0.002544] Initializing cgroup subsys freezer
[ 0.002552] Initializing cgroup subsys net_cls
[ 0.003867] regulator: core version 0.5
[ 0.004000] NET: Registered protocol family 16
[ 0.004360] MPC7450 family performance monitor hardware support registered
[ 0.004417] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42
[ 0.004453] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.004467] channel 0 bus <multibus>
[ 0.004474] channel 1 bus <multibus>
[ 0.004503] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26
[ 0.004520] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.004532] channel 0 bus <multibus>
[ 0.004552] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.004563] channel 1 bus <multibus>
[ 0.004570] channel 2 bus <multibus>
[ 0.004615] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25
[ 0.004640] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47
[ 0.004752] PCI: Probing PCI hardware
[ 0.004924] pci 0000:00:10.0: reg 10 32bit mmio: [0x91000000-0x91ffffff]
[ 0.004933] pci 0000:00:10.0: reg 14 32bit mmio pref: [0x98000000-0x9fffffff]
[ 0.004952] pci 0000:00:10.0: reg 30 32bit mmio pref: [0x90000000-0x9001ffff]
[ 0.005022] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48
[ 0.005247] pci 0001:10:12.0: reg 10 32bit mmio: [0x80084000-0x80085fff]
[ 0.005286] pci 0001:10:12.0: supports D1 D2
[ 0.005292] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.005307] pci 0001:10:12.0: PME# disabled
[ 0.005340] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
[ 0.005389] pci 0001:10:18.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.005439] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.005496] pci 0001:10:1a.0: reg 10 32bit mmio: [0x80083000-0x80083fff]
[ 0.005554] pci 0001:10:1b.0: reg 10 32bit mmio: [0x80082000-0x80082fff]
[ 0.005593] pci 0001:10:1b.0: supports D1 D2
[ 0.005597] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.005619] pci 0001:10:1b.0: PME# disabled
[ 0.005659] pci 0001:10:1b.1: reg 10 32bit mmio: [0x80081000-0x80081fff]
[ 0.005698] pci 0001:10:1b.1: supports D1 D2
[ 0.005703] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.005718] pci 0001:10:1b.1: PME# disabled
[ 0.005758] pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff]
[ 0.005797] pci 0001:10:1b.2: supports D1 D2
[ 0.005801] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.005816] pci 0001:10:1b.2: PME# disabled
[ 0.005870] irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52
[ 0.005896] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
[ 0.005920] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28
[ 0.005943] irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
[ 0.005964] irq: irq 63 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 63
[ 0.006456] pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff]
[ 0.006503] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff]
[ 0.006533] pci 0002:20:0e.0: supports D1 D2
[ 0.006538] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.006556] pci 0002:20:0e.0: PME# disabled
[ 0.006585] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
[ 0.006605] pci 0002:20:0f.0: reg 30 32bit mmio pref: [0xf5100000-0xf51fffff]
[ 0.006658] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39
[ 0.006679] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40
[ 0.006701] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41
[ 0.006977] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff]
[ 0.006984] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff]
[ 0.006990] pci_bus 0000:00: resource 2 mem: [0x90000000-0x9fffffff]
[ 0.006996] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff]
[ 0.007001] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
[ 0.007007] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
[ 0.007013] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff]
[ 0.007019] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
[ 0.008372] bio: create slab <bio-0> at 0
[ 0.008739] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
[ 0.008783] vgaarb: loaded
[ 0.009068] SCSI subsystem initialized
[ 0.009203] libata version 3.00 loaded.
[ 0.009398] usbcore: registered new interface driver usbfs
[ 0.009436] usbcore: registered new interface driver hub
[ 0.009520] usbcore: registered new device driver usb
[ 0.009833] Switching to clocksource timebase
[ 0.013714] NET: Registered protocol family 2
[ 0.013954] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.014648] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.016267] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.016691] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.016711] TCP reno registered
[ 0.016903] NET: Registered protocol family 1
[ 0.017127] Trying to unpack rootfs image as initramfs...
[ 0.152210] Freeing initrd memory: 3108k freed
[ 0.152617] Thermal assist unit not available
[ 0.153085] audit: initializing netlink socket (disabled)
[ 0.153131] type=2000 audit(1262451282.148:1): initialized
[ 0.166617] highmem bounce pool size: 64 pages
[ 0.169963] VFS: Disk quotas dquot_6.5.2
[ 0.170135] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.170942] fuse init (API version 7.13)
[ 0.171137] msgmni has been set to 1501
[ 0.171669] alg: No test for stdrng (krng)
[ 0.171711] io scheduler noop registered
[ 0.171722] io scheduler anticipatory registered
[ 0.171734] io scheduler deadline registered
[ 0.171884] io scheduler cfq registered (default)
[ 0.172167] Using unsupported 1024x768 NVDA,Display-A at 98004000, depth=8, pitch=1024
[ 0.184820] Console: switching to colour frame buffer device 128x48
[ 0.197213] fb0: Open Firmware frame buffer device on /pci@f0000000/NVDA,Parent@10/NVDA,Display-A@0
[ 0.200114] Generic non-volatile memory driver v1.1
[ 0.202241] brd: module loaded
[ 0.202399] MacIO PCI driver attached to Intrepid chipset
[ 0.202860] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
[ 0.203066] irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
[ 0.203081] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
[ 0.203148] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22
[ 0.203163] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
[ 0.203177] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
[ 0.203262] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23
[ 0.203276] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
[ 0.203291] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
[ 0.203613] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.204109] Uniform Multi-Platform E-IDE driver
[ 0.204337] adb: starting probe task...
[ 0.204441] adb: finished probe task...
[ 0.204691] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
[ 1.221870] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
[ 1.222080] Probing IDE interface ide0...
[ 1.510049] hda: ST380011A, ATA DISK drive
[ 2.181938] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.182329] hda: UDMA/100 mode selected
[ 2.182698] ide0 at 0xf102a000-0xf102a070,0xf102a160 on irq 39
[ 3.201867] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24
[ 3.202077] Probing IDE interface ide1...
[ 3.602046] hdc: HL-DT-STDVD-RAM GSA-H55L, ATAPI CD/DVD-ROM drive
[ 3.937923] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.144764] hdc: MWDMA2 mode selected
[ 4.145181] ide1 at 0xf1026000-0xf1026070,0xf1026160 on irq 24
[ 4.145418] ide-gd driver 1.18
[ 4.145541] hda: max request size: 512KiB
[ 4.158053] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
[ 4.158386] hda: cache flushes supported
[ 4.158577] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7
[ 4.181976] ide-cd driver 5.00
[ 4.190031] ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 4.195138] Uniform CD-ROM driver Revision: 3.20
[ 10.334582] Fixed MDIO Bus: probed
[ 10.339708] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.344800] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006)
[ 10.349832] ehci_hcd 0001:10:1b.2: EHCI Host Controller
[ 10.354891] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1
[ 10.381894] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
[ 10.397870] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00
[ 10.403023] usb usb1: configuration #1 chosen from 1 choice
[ 10.408101] hub 1-0:1.0: USB hub found
[ 10.413062] hub 1-0:1.0: 5 ports detected
[ 10.418088] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.423116] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 10.428101] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 10.432977] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
[ 10.437917] ohci_hcd 0001:10:1a.0: OHCI Host Controller
[ 10.442924] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2
[ 10.447952] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
[ 10.525799] usb usb2: configuration #1 chosen from 1 choice
[ 10.530910] hub 2-0:1.0: USB hub found
[ 10.535953] hub 2-0:1.0: 2 ports detected
[ 10.540979] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002)
[ 10.545946] ohci_hcd 0001:10:1b.0: OHCI Host Controller
[ 10.550907] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3
[ 10.555781] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
[ 10.633801] usb usb3: configuration #1 chosen from 1 choice
[ 10.638648] hub 3-0:1.0: USB hub found
[ 10.643357] hub 3-0:1.0: 3 ports detected
[ 10.648032] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002)
[ 10.652648] ohci_hcd 0001:10:1b.1: OHCI Host Controller
[ 10.657321] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
[ 10.662040] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
[ 10.741739] usb usb4: configuration #1 chosen from 1 choice
[ 10.746620] hub 4-0:1.0: USB hub found
[ 10.751173] hub 4-0:1.0: 2 ports detected
[ 10.755794] uhci_hcd: USB Universal Host Controller Interface driver
[ 10.760636] mice: PS/2 mouse device common for all mice
[ 10.765303] PowerMac i2c bus pmu 2 registered
[ 10.769820] PowerMac i2c bus pmu 1 registered
[ 10.774266] PowerMac i2c bus mac-io 0 registered
[ 10.778638] PowerMac i2c bus uni-n 1 registered
[ 10.782978] PowerMac i2c bus uni-n 0 registered
[ 10.787886] TCP cubic registered
[ 10.792048] NET: Registered protocol family 17
[ 10.796409] registered taskstats version 1
[ 10.800966] input: PMU as /devices/virtual/input/input1
[ 10.805234] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 10.809437] Freeing unused kernel memory: 216k init
[ 10.942224] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 11.338142] Linux agpgart interface v0.103
[ 11.369343] usb 2-1: configuration #1 chosen from 1 choice
[ 11.409448] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[ 11.423506] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 11.423642] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 11.501316] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
[ 11.589345] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 11.622307] PHY ID: 4061e4, addr: 0
[ 11.623362] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:ba:d4:9a
[ 11.623370] eth0: Found BCM5221 PHY
[ 11.646236] [drm] Initialized drm 1.1.0 20060810
[ 11.670634] ohci1394 0002:20:0e.0: enabling device (0000 -> 0002)
[ 11.739716] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 11.848164] [drm] nouveau 0000:00:10.0: Detected an NV10 generation card (0x018900a3)
[ 11.855858] usb 3-1: configuration #1 chosen from 1 choice
[ 11.866057] [drm] nouveau 0000:00:10.0: OF bios successfully copied (4027 bytes)
[ 11.871150] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PROM
[ 11.876188] [drm] nouveau 0000:00:10.0: ... BIOS signature not found
[ 11.881089] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PRAMIN
[ 11.917969] [drm] nouveau 0000:00:10.0: ... BIOS checksum invalid
[ 11.922874] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PCIROM
[ 11.994563] usbcore: registered new interface driver hiddev
[ 12.009569] input: Logitech USB Optical Mouse as /devices/pci0001:10/0001:10:1b.0/usb3/3-1/3-1:1.0/input/input2
[ 12.018410] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0001:10:1b.0-1/input0
[ 12.033930] [drm] nouveau 0000:00:10.0: ... BIOS signature not found
[ 12.039411] [drm] nouveau 0000:00:10.0: Using BIOS image from PRAMIN
[ 12.077217] [drm] nouveau 0000:00:10.0: BMP BIOS found
[ 12.082588] [drm] nouveau 0000:00:10.0: BMP version 5.38
[ 12.087859] [drm] nouveau 0000:00:10.0: Bios version 04.18.20.19
[ 12.093110] [drm] nouveau 0000:00:10.0: Found Display Configuration Block version 2.2
[ 12.098456] [drm] nouveau 0000:00:10.0: Raw DCB entry 0: 01000123 00000004
[ 12.103753] [drm] nouveau 0000:00:10.0: Raw DCB entry 1: 02010200 11b088b8
[ 12.108978] [drm] nouveau 0000:00:10.0: Raw DCB entry 2: 02010201 11b00703
[ 12.114179] [drm] nouveau 0000:00:10.0: Loading NV17 power sequencing microcode
[ 12.119427] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 0 at offset 0x030E
[ 12.124760] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 1 at offset 0x0454
[ 12.130038] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 2 at offset 0x077A
[ 12.141973] usbcore: registered new interface driver usbhid
[ 12.149897] usbhid: v2.6:USB HID core driver
[ 12.189903] usb 3-2: new full speed USB device using ohci_hcd and address 3
[ 12.233883] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 3 at offset 0x0959
[ 12.239384] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 4 at offset 0x0976
[ 12.244732] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 5 at offset 0x0993
[ 12.277873] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 6 at offset 0x0AB9
[ 12.298003] [TTM] Zone kernel: Available graphics memory: 384550 kiB.
[ 12.303187] [TTM] Zone highmem: Available graphics memory: 515622 kiB.
[ 12.313918] [drm] nouveau 0000:00:10.0: 32 MiB VRAM
[ 12.328342] [drm] nouveau 0000:00:10.0: 64 MiB GART (aperture)
[ 12.338006] [drm] nouveau 0000:00:10.0: Allocating FIFO number 0
[ 12.343361] [drm] nouveau 0000:00:10.0: nouveau_channel_alloc: initialised FIFO 0
[ 12.353877] [drm] nouveau 0000:00:10.0: Initial CRTC_OWNER is 0
[ 12.361993] [drm] nouveau 0000:00:10.0: Detected a LVDS connector
[ 12.506367] usb 3-2: configuration #1 chosen from 1 choice
[ 12.520963] hub 3-2:1.0: USB hub found
[ 12.535134] hub 3-2:1.0: 3 ports detected
[ 12.553106] [drm] nouveau 0000:00:10.0: Detected a VGA connector
[ 12.562523] [drm] nouveau 0000:00:10.0: Detected a TV connector
[ 12.569316] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on lvds encoder (output 0)
[ 12.574091] [drm] nouveau 0000:00:10.0: Calling LVDS script 1:
[ 12.578587] [drm] nouveau 0000:00:10.0: Calling LVDS script 6:
[ 12.582929] [drm] nouveau 0000:00:10.0: 0x0EA6: Parsing digital output script table
[ 12.847340] usb 3-2.3: new full speed USB device using ohci_hcd and address 4
[ 12.967152] usb 3-2.3: configuration #1 chosen from 1 choice
[ 12.984792] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input3
[ 12.997767] generic-usb 0003:05AC:020C.0002: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-2.3/input0
[ 13.019836] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-2/3-2.3/3-2.3:1.1/input/input4
[ 13.034143] generic-usb 0003:05AC:020C.0003: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-2.3/input1
[ 13.050091] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000a95fffebad49a]
[ 13.089895] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on vga encoder (output 1)
[ 13.095193] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on TV encoder (output 2)
[ 13.177872] [drm] nouveau 0000:00:10.0: Load detected on output B
[ 13.183365] [drm] nouveau 0000:00:10.0: allocated 1024x768 fb: 0x9000, bo efbde800
[ 13.189028] fb1: nouveaufb frame buffer device
[ 13.194396] registered panic notifier
[ 13.199762] [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:10.0 on minor 0
[ 13.306633] PM: Starting manual resume from disk
[ 13.349655] EXT4-fs (hda2): INFO: recovery required on readonly filesystem
[ 13.355298] EXT4-fs (hda2): write access will be enabled during recovery
[ 14.022041] eth0: Link is up at 100 Mbps, full-duplex.
[ 18.198359] EXT4-fs (hda2): recovery complete
[ 18.204540] EXT4-fs (hda2): mounted filesystem with ordered data mode
[ 19.811918] Adding 1074208k swap on /dev/hda4. Priority:-1 extents:1 across:1074208k
[ 20.513745] udev: starting version 147
[ 21.203989] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 21.339888] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
[ 21.346508] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
[ 21.680820] Bluetooth: Core ver 2.15
[ 21.684449] NET: Registered protocol family 31
[ 21.684458] Bluetooth: HCI device and connection manager initialized
[ 21.684465] Bluetooth: HCI socket layer initialized
[ 21.918449] cfg80211: Calling CRDA to update world regulatory domain
[ 21.935113] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 21.935274] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
[ 21.938051] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
[ 21.980324] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 21.982525] usbcore: registered new interface driver btusb
[ 22.331735] apm_emu: PMU APM Emulation initialized.
[ 22.416744] cfg80211: World regulatory domain updated:
[ 22.416758] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.416765] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.416772] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.416778] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.416784] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.416790] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.521299] b43legacy-phy0: Broadcom 4306 WLAN found
[ 22.541876] b43legacy-phy0 debug: Found PHY: Analog 1, Type 2, Revision 1
[ 22.541907] b43legacy-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
[ 22.565980] b43legacy-phy0 debug: Radio initialized
[ 22.988137] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.004651] phy0: Selected rate control algorithm 'minstrel'
[ 23.005340] Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
[ 23.516167] irq: irq 30 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30
[ 23.516208] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
[ 23.516229] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31
[ 23.653463] snd-aoa-fabric-layout: Using direct GPIOs
[ 23.653590] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61
[ 23.653607] irq: irq 50 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 50
[ 23.715556] snd-aoa-codec-tas: found 'deq' node
[ 23.717141] snd-aoa-fabric-layout: can use this codec
[ 23.781279] snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/deq@6a
[ 27.913960] b43legacy ssb0:0: firmware: requesting b43legacy/ucode4.fw
[ 28.053155] b43legacy ssb0:0: firmware: requesting b43legacy/pcm4.fw
[ 28.119009] b43legacy ssb0:0: firmware: requesting b43legacy/b0g0initvals2.fw
[ 28.306167] b43legacy-phy0: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27)
[ 28.370408] b43legacy-phy0 debug: Chip initialized
[ 28.370923] b43legacy-phy0 debug: 30-bit DMA initialized
[ 28.378413] Registered led device: b43legacy-phy0::tx
[ 28.380349] Registered led device: b43legacy-phy0::rx
[ 28.383776] Registered led device: b43legacy-phy0::radio
[ 28.383841] b43legacy-phy0 debug: Wireless interface started
[ 28.398158] b43legacy-phy0 debug: Adding Interface type 2
[ 28.420865] eth0: Link is up at 100 Mbps, full-duplex.
[ 28.420876] eth0: Pause is disabled
[ 29.458179] Process Xorg (pid:770) mapped non-existing PCI legacy memory for 00000:00
[ 30.844633] NET: Registered protocol family 10
[ 30.845793] lo: Disabled Privacy Extensions
[ 30.849043] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.391272] hda: host max PIO4 wanted PIO0 selected PIO0
[ 32.062688] Bluetooth: L2CAP ver 2.14
[ 32.062698] Bluetooth: L2CAP socket layer initialized
[ 32.183708] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 32.183721] Bluetooth: BNEP filters: protocol multicast
[ 32.351335] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
[ 32.351352] hda: task_no_data_intr: error=0x04 { DriveStatusError }
[ 32.351360] hda: possibly failed opcode: 0xef
[ 32.430095] Bridge firewalling registered
[ 32.522472] Bluetooth: SCO (Voice Link) ver 0.6
[ 32.522484] Bluetooth: SCO socket layer initialized
[ 32.622275] lp: driver loaded but no devices found
[ 32.728147] ppdev: user-space parallel port driver
[ 32.953454] Bluetooth: RFCOMM TTY layer initialized
[ 32.953470] Bluetooth: RFCOMM socket layer initialized
[ 32.953475] Bluetooth: RFCOMM ver 1.11
[ 41.317896] eth0: no IPv6 routers present