rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-un-def-alt1 (builder@apiary.egro.altlinux.org) (gcc version 4.3.2 20081105 (ALT Linux 4.3.2-alt13) (GCC) ) #1 SMP Thu Dec 31 16:03:56 UTC 2009
[ 0.000000] Command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=31e331ec-a781-4e77-a64f-73dbb22feacc panic=30 splash=silent
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
[ 0.000000] BIOS-e820: 000000000009c000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f91a000 (usable)
[ 0.000000] BIOS-e820: 000000007f91a000 - 000000007f9d1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f9d1000 - 000000007fa32000 (usable)
[ 0.000000] BIOS-e820: 000000007fa32000 - 000000007fa9a000 (reserved)
[ 0.000000] BIOS-e820: 000000007fa9a000 - 000000007fad5000 (usable)
[ 0.000000] BIOS-e820: 000000007fad5000 - 000000007fb1a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fb1a000 - 000000007fb27000 (usable)
[ 0.000000] BIOS-e820: 000000007fb27000 - 000000007fb3a000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fb3a000 - 000000007fc00000 (usable)
[ 0.000000] BIOS-e820: 000000007fc00000 - 0000000090000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 00000000ffc0c000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000180000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FC00000 mask FFFC00000 uncachable
[ 0.000000] 2 base 100000000 mask F00000000 write-back
[ 0.000000] 3 base 200000000 mask E00000000 write-back
[ 0.000000] 4 base F00000000 mask F00000000 write-combining
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0x7fc00 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009c000 (usable)
[ 0.000000] modified: 000000000009c000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f91a000 (usable)
[ 0.000000] modified: 000000007f91a000 - 000000007f9d1000 (ACPI NVS)
[ 0.000000] modified: 000000007f9d1000 - 000000007fa32000 (usable)
[ 0.000000] modified: 000000007fa32000 - 000000007fa9a000 (reserved)
[ 0.000000] modified: 000000007fa9a000 - 000000007fad5000 (usable)
[ 0.000000] modified: 000000007fad5000 - 000000007fb1a000 (ACPI NVS)
[ 0.000000] modified: 000000007fb1a000 - 000000007fb27000 (usable)
[ 0.000000] modified: 000000007fb27000 - 000000007fb3a000 (ACPI data)
[ 0.000000] modified: 000000007fb3a000 - 000000007fc00000 (usable)
[ 0.000000] modified: 000000007fc00000 - 0000000090000000 (reserved)
[ 0.000000] modified: 00000000ffc00000 - 00000000ffc0c000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000180000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fc00000
[ 0.000000] 0000000000 - 007fc00000 page 2M
[ 0.000000] kernel direct mapping tables up to 7fc00000 @ 8000-b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000180000000
[ 0.000000] 0100000000 - 0180000000 page 2M
[ 0.000000] kernel direct mapping tables up to 180000000 @ 9000-10000
[ 0.000000] RAMDISK: 00e62000 - 00eff03f
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 000000007fb39120 0007C (v01 INTEL S5000PAL 00000000 INTL 01000013)
[ 0.000000] ACPI: FACP 000000007fb37000 000F4 (v03 INTEL S5000PAL 00000000 INTL 01000013)
[ 0.000000] ACPI: DSDT 000000007fb30000 05DC3 (v02 INTEL S5000PAL 00000008 INTL 01000013)
[ 0.000000] ACPI: FACS 000000007fad5000 00040
[ 0.000000] ACPI: APIC 000000007fb36000 000C8 (v01 INTEL S5000PAL 00000000 INTL 01000013)
[ 0.000000] ACPI: SPCR 000000007fb2f000 00050 (v01 INTEL S5000PAL 00000000 INTL 01000013)
[ 0.000000] ACPI: HPET 000000007fb2e000 00038 (v01 INTEL S5000PAL 00000001 INTL 01000013)
[ 0.000000] ACPI: MCFG 000000007fb2d000 0003C (v01 INTEL S5000PAL 00000001 INTL 01000013)
[ 0.000000] ACPI: SSDT 000000007fb2c000 00193 (v02 INTEL IPMI 00004000 INTL 20060317)
[ 0.000000] ACPI: SSDT 000000007fb2b000 002D4 (v02 INTEL CST 00004000 INTL 20060317)
[ 0.000000] ACPI: HEST 000000007fb2a000 000A8 (v01 INTEL S5000PAL 00000001 INTL 00000001)
[ 0.000000] ACPI: BERT 000000007fb29000 00030 (v01 INTEL S5000PAL 00000001 INTL 00000001)
[ 0.000000] ACPI: ERST 000000007fb28000 00230 (v01 INTEL S5000PAL 00000001 INTL 00000001)
[ 0.000000] ACPI: EINJ 000000007fb27000 00130 (v01 INTEL S5000PAL 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000180000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000
[ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff]
[ 0.000000] bootmap [0000000000010000 - 000000000003ffff] pages 30
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0180000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00016dec78] TEXT DATA BSS ==> [0001000000 - 00016dec78]
[ 0.000000] #3 [0000e62000 - 0000eff03f] RAMDISK ==> [0000e62000 - 0000eff03f]
[ 0.000000] #4 [000009c000 - 0000100000] BIOS reserved ==> [000009c000 - 0000100000]
[ 0.000000] #5 [00016df000 - 00016df334] BRK ==> [00016df000 - 00016df334]
[ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
[ 0.000000] #7 [0000009000 - 000000b000] PGTABLE ==> [0000009000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000fdbe0] fdbe0
[ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00180000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x0007f91a
[ 0.000000] 0: 0x0007f9d1 -> 0x0007fa32
[ 0.000000] 0: 0x0007fa9a -> 0x0007fad5
[ 0.000000] 0: 0x0007fb1a -> 0x0007fb27
[ 0.000000] 0: 0x0007fb3a -> 0x0007fc00
[ 0.000000] 0: 0x00100000 -> 0x00180000
[ 0.000000] On node 0 totalpages: 1047072
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 263 pages reserved
[ 0.000000] DMA zone: 3672 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 504513 pages, LIFO batch:31
[ 0.000000] Normal zone: 7168 pages used for memmap
[ 0.000000] Normal zone: 517120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x87] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007f91a000 - 000000007f9d1000
[ 0.000000] PM: Registered nosave memory: 000000007fa32000 - 000000007fa9a000
[ 0.000000] PM: Registered nosave memory: 000000007fad5000 - 000000007fb1a000
[ 0.000000] PM: Registered nosave memory: 000000007fb27000 - 000000007fb3a000
[ 0.000000] PM: Registered nosave memory: 000000007fc00000 - 0000000090000000
[ 0.000000] PM: Registered nosave memory: 0000000090000000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc0c000
[ 0.000000] PM: Registered nosave memory: 00000000ffc0c000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 90000000 (gap: 90000000:6fc00000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880028200000 s80088 r8192 d22312 u262144
[ 0.000000] pcpu-alloc: s80088 r8192 d22312 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1025305
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=31e331ec-a781-4e77-a64f-73dbb22feacc panic=30 splash=silent
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 4056180k/6291456k available (3594k kernel code, 2103168k absent, 132108k reserved, 2044k data, 592k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:880
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.979 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.95 BogoMIPS (lpj=7979916)
[ 0.004061] Security Framework initialized
[ 0.004073] SELinux: Disabled at boot.
[ 0.004450] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009217] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010246] Mount-cache hash table entries: 256
[ 0.010416] Initializing cgroup subsys ns
[ 0.010426] Initializing cgroup subsys cpuacct
[ 0.010431] Initializing cgroup subsys devices
[ 0.010435] Initializing cgroup subsys freezer
[ 0.010438] Initializing cgroup subsys net_cls
[ 0.010470] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010474] CPU: L2 cache: 4096K
[ 0.010479] CPU 0/0x0 -> Node 0
[ 0.010482] CPU: Physical Processor ID: 0
[ 0.010485] CPU: Processor Core ID: 0
[ 0.010489] mce: CPU supports 6 MCE banks
[ 0.010498] CPU0: Thermal monitoring enabled (TM1)
[ 0.010504] using mwait in idle threads.
[ 0.010507] Performance Events: Core2 events, Intel PMU driver.
[ 0.010515] ... version: 2
[ 0.010518] ... bit width: 40
[ 0.010520] ... generic registers: 2
[ 0.010523] ... value mask: 000000ffffffffff
[ 0.010526] ... max period: 000000007fffffff
[ 0.010529] ... fixed-purpose events: 3
[ 0.010532] ... event mask: 0000000700000003
[ 0.010555] ACPI: Core revision 20090903
[ 0.024090] Setting APIC routing to flat
[ 0.024460] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067142] CPU0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06
[ 0.068001] Booting processor 1 APIC 0x6 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] Calibrating delay using timer specific routine.. 3990.08 BogoMIPS (lpj=7980172)
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 4096K
[ 0.008000] CPU 1/0x6 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 3
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM1)
[ 0.152049] CPU1: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06
[ 0.152070] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.156132] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#2
[ 0.008000] Calibrating delay using timer specific routine.. 3990.06 BogoMIPS (lpj=7980125)
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 4096K
[ 0.008000] CPU 2/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU2: Thermal monitoring enabled (TM1)
[ 0.244078] CPU2: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06
[ 0.244099] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.248218] Booting processor 3 APIC 0x7 ip 0x6000
[ 0.008000] Initializing CPU#3
[ 0.008000] Calibrating delay using timer specific routine.. 3990.06 BogoMIPS (lpj=7980131)
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 4096K
[ 0.008000] CPU 3/0x7 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 3
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU3: Thermal monitoring enabled (TM1)
[ 0.336098] CPU3: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06
[ 0.336118] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.340016] Brought up 4 CPUs
[ 0.340020] Total of 4 processors activated (15960.17 BogoMIPS).
[ 0.341712] CPU0 attaching sched-domain:
[ 0.341716] domain 0: span 0,2 level MC
[ 0.341719] groups: 0 2
[ 0.341724] domain 1: span 0-3 level CPU
[ 0.341726] groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048)
[ 0.341734] CPU1 attaching sched-domain:
[ 0.341736] domain 0: span 1,3 level MC
[ 0.341738] groups: 1 3
[ 0.341742] domain 1: span 0-3 level CPU
[ 0.341744] groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048)
[ 0.341750] CPU2 attaching sched-domain:
[ 0.341752] domain 0: span 0,2 level MC
[ 0.341754] groups: 2 0
[ 0.341757] domain 1: span 0-3 level CPU
[ 0.341759] groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048)
[ 0.341765] CPU3 attaching sched-domain:
[ 0.341767] domain 0: span 1,3 level MC
[ 0.341769] groups: 3 1
[ 0.341773] domain 1: span 0-3 level CPU
[ 0.341775] groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048)
[ 0.341958] regulator: core version 0.5
[ 0.341958] NET: Registered protocol family 16
[ 0.341958] ACPI: bus type pci registered
[ 0.344057] PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
[ 0.344063] PCI: MCFG area at 80000000 reserved in E820
[ 0.354359] PCI: Using MMCONFIG at 80000000 - 8fffffff
[ 0.354363] PCI: Using configuration type 1 for base access
[ 0.356117] bio: create slab <bio-0> at 0
[ 0.356606] ACPI: EC: Look up EC in DSDT
[ 0.364010] ACPI: Interpreter enabled
[ 0.364016] ACPI: (supports S0 S1 S4 S5)
[ 0.364041] ACPI: Using IOAPIC for interrupt routing
[ 0.372563] ACPI: No dock devices found.
[ 0.377465] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.377506] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.377506] pci 0000:00:00.0: PME# disabled
[ 0.377506] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.377506] pci 0000:00:02.0: PME# disabled
[ 0.377506] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.377506] pci 0000:00:03.0: PME# disabled
[ 0.377506] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.377506] pci 0000:00:04.0: PME# disabled
[ 0.377506] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.377506] pci 0000:00:05.0: PME# disabled
[ 0.377506] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.377506] pci 0000:00:06.0: PME# disabled
[ 0.377506] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.377506] pci 0000:00:07.0: PME# disabled
[ 0.377506] pci 0000:00:08.0: reg 10 64bit mmio: [0xfe700000-0xfe7003ff]
[ 0.377506] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 0.377506] pci 0000:00:08.0: PME# disabled
[ 0.377506] pci 0000:00:1d.0: reg 20 io port: [0x40a0-0x40bf]
[ 0.377506] pci 0000:00:1d.1: reg 20 io port: [0x4080-0x409f]
[ 0.377506] pci 0000:00:1d.2: reg 20 io port: [0x4060-0x407f]
[ 0.377506] pci 0000:00:1d.3: reg 20 io port: [0x4040-0x405f]
[ 0.377506] pci 0000:00:1d.7: reg 10 32bit mmio: [0x98c00400-0x98c007ff]
[ 0.377506] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.377506] pci 0000:00:1d.7: PME# disabled
[ 0.377506] pci 0000:00:1f.1: reg 10 io port: [0x40e8-0x40ef]
[ 0.377506] pci 0000:00:1f.1: reg 14 io port: [0x40fc-0x40ff]
[ 0.377506] pci 0000:00:1f.1: reg 18 io port: [0x40e0-0x40e7]
[ 0.377506] pci 0000:00:1f.1: reg 1c io port: [0x40f8-0x40fb]
[ 0.377506] pci 0000:00:1f.1: reg 20 io port: [0x40c0-0x40cf]
[ 0.377506] pci 0000:00:1f.2: reg 10 io port: [0x40d8-0x40df]
[ 0.377506] pci 0000:00:1f.2: reg 14 io port: [0x40f4-0x40f7]
[ 0.377506] pci 0000:00:1f.2: reg 18 io port: [0x40d0-0x40d7]
[ 0.377506] pci 0000:00:1f.2: reg 1c io port: [0x40f0-0x40f3]
[ 0.377506] pci 0000:00:1f.2: reg 20 io port: [0x4020-0x403f]
[ 0.377506] pci 0000:00:1f.2: reg 24 32bit mmio: [0x98c00000-0x98c003ff]
[ 0.377506] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.377506] pci 0000:00:1f.2: PME# disabled
[ 0.377506] pci 0000:00:1f.3: reg 20 io port: [0x4000-0x401f]
[ 0.380872] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.380963] pci 0000:01:00.0: PME# disabled
[ 0.382799] pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
[ 0.382891] pci 0000:01:00.3: PME# disabled
[ 0.383533] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.384125] pci 0000:00:02.0: bridge io port: [0x3000-0x3fff]
[ 0.384129] pci 0000:00:02.0: bridge 32bit mmio: [0x98000000-0x989fffff]
[ 0.386524] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.386616] pci 0000:02:00.0: PME# disabled
[ 0.387304] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.389515] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.389606] pci 0000:02:01.0: PME# disabled
[ 0.390249] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.392505] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 0.392597] pci 0000:02:02.0: PME# disabled
[ 0.393239] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.394662] pci 0000:01:00.0: bridge io port: [0x3000-0x3fff]
[ 0.394754] pci 0000:01:00.0: bridge 32bit mmio: [0x98000000-0x988fffff]
[ 0.400277] pci 0000:05:00.0: reg 10 32bit mmio: [0x98820000-0x9883ffff]
[ 0.400460] pci 0000:05:00.0: reg 14 32bit mmio: [0x98400000-0x987fffff]
[ 0.400643] pci 0000:05:00.0: reg 18 io port: [0x3020-0x303f]
[ 0.402341] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.402433] pci 0000:05:00.0: PME# disabled
[ 0.404139] pci 0000:05:00.1: reg 10 32bit mmio: [0x98800000-0x9881ffff]
[ 0.404322] pci 0000:05:00.1: reg 14 32bit mmio: [0x98000000-0x983fffff]
[ 0.404505] pci 0000:05:00.1: reg 18 io port: [0x3000-0x301f]
[ 0.406203] pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
[ 0.406295] pci 0000:05:00.1: PME# disabled
[ 0.407396] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.410341] pci 0000:02:02.0: bridge io port: [0x3000-0x3fff]
[ 0.410432] pci 0000:02:02.0: bridge 32bit mmio: [0x98000000-0x988fffff]
[ 0.413499] pci 0000:08:00.0: reg 10 32bit mmio: [0x98b60000-0x98b7ffff]
[ 0.413506] pci 0000:08:00.0: reg 14 32bit mmio: [0x98b40000-0x98b5ffff]
[ 0.413512] pci 0000:08:00.0: reg 18 io port: [0x2020-0x203f]
[ 0.413532] pci 0000:08:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
[ 0.413557] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.413563] pci 0000:08:00.0: PME# disabled
[ 0.413608] pci 0000:08:00.1: reg 10 32bit mmio: [0x98b20000-0x98b3ffff]
[ 0.413614] pci 0000:08:00.1: reg 14 32bit mmio: [0x98b00000-0x98b1ffff]
[ 0.413621] pci 0000:08:00.1: reg 18 io port: [0x2000-0x201f]
[ 0.413640] pci 0000:08:00.1: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
[ 0.413665] pci 0000:08:00.1: PME# supported from D0 D3hot D3cold
[ 0.413671] pci 0000:08:00.1: PME# disabled
[ 0.413700] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.413772] pci 0000:00:04.0: bridge io port: [0x2000-0x2fff]
[ 0.413775] pci 0000:00:04.0: bridge 32bit mmio: [0x98b00000-0x98bfffff]
[ 0.413954] pci 0000:0c:0c.0: reg 10 32bit mmio pref: [0x90000000-0x97ffffff]
[ 0.413962] pci 0000:0c:0c.0: reg 14 io port: [0x1000-0x10ff]
[ 0.413969] pci 0000:0c:0c.0: reg 18 32bit mmio: [0x98a00000-0x98a0ffff]
[ 0.413990] pci 0000:0c:0c.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
[ 0.414010] pci 0000:0c:0c.0: supports D1 D2
[ 0.414047] pci 0000:00:1e.0: transparent bridge
[ 0.414052] pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff]
[ 0.414056] pci 0000:00:1e.0: bridge 32bit mmio: [0x98a00000-0x98afffff]
[ 0.414062] pci 0000:00:1e.0: bridge 64bit mmio pref: [0x90000000-0x97ffffff]
[ 0.414087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.414492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.414551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.414637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 0.414722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPC._PRT]
[ 0.414999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.415300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.415350] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIE._PRT]
[ 0.415483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW._PRT]
[ 0.415623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO._PRT]
[ 0.415711] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIP._PRT]
[ 0.415785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIQ._PRT]
[ 0.424104] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
[ 0.424224] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
[ 0.424340] ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
[ 0.424457] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
[ 0.424572] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 *10 11)
[ 0.424690] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 *11)
[ 0.424805] ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
[ 0.424921] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11)
[ 0.424980] vgaarb: device added: PCI:0000:0c:0c.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.424980] vgaarb: loaded
[ 0.424980] PCI: Using ACPI for IRQ routing
[ 0.424980] NetLabel: Initializing
[ 0.424980] NetLabel: domain hash size = 128
[ 0.424980] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.424980] NetLabel: unlabeled traffic allowed by default
[ 0.424980] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.424980] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.436008] Switching to clocksource tsc
[ 0.437569] pnp: PnP ACPI init
[ 0.437602] ACPI: bus type pnp registered
[ 0.443475] pnp: PnP ACPI: found 13 devices
[ 0.443480] ACPI: ACPI bus type pnp unregistered
[ 0.443497] system 00:01: iomem range 0x80000000-0x8fffffff has been reserved
[ 0.443503] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.443508] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
[ 0.443513] system 00:01: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.443519] system 00:01: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.443524] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved
[ 0.443529] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved
[ 0.443538] system 00:06: ioport range 0x500-0x53f has been reserved
[ 0.443543] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.443547] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.443553] system 00:06: ioport range 0xca2-0xca7 has been reserved
[ 0.443558] system 00:06: ioport range 0xca8-0xcaf has been reserved
[ 0.443563] system 00:06: ioport range 0x161-0x161 has been reserved
[ 0.443567] system 00:06: ioport range 0x162-0x162 has been reserved
[ 0.448710] pci 0000:08:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 0.448717] pci 0000:08:00.1: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 0.450006] pci 0000:02:00.0: BAR 14: can't allocate mem resource [0x98900000-0x988fffff]
[ 0.450012] pci 0000:02:00.0: BAR 13: can't allocate I/O resource [0x4000-0x3fff]
[ 0.450017] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 0.450021] pci 0000:02:00.0: IO window: disabled
[ 0.450149] pci 0000:02:00.0: MEM window: disabled
[ 0.450241] pci 0000:02:00.0: PREFETCH window: 0x00000098d00000-0x00000098efffff
[ 0.450425] pci 0000:02:01.0: PCI bridge, secondary bus 0000:04
[ 0.450428] pci 0000:02:01.0: IO window: disabled
[ 0.450562] pci 0000:02:01.0: MEM window: disabled
[ 0.450654] pci 0000:02:01.0: PREFETCH window: disabled
[ 0.450746] pci 0000:02:02.0: PCI bridge, secondary bus 0000:05
[ 0.450792] pci 0000:02:02.0: IO window: 0x3000-0x3fff
[ 0.450929] pci 0000:02:02.0: MEM window: 0x98000000-0x988fffff
[ 0.451021] pci 0000:02:02.0: PREFETCH window: disabled
[ 0.451113] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
[ 0.451159] pci 0000:01:00.0: IO window: 0x3000-0x3fff
[ 0.451296] pci 0000:01:00.0: MEM window: 0x98000000-0x988fffff
[ 0.451388] pci 0000:01:00.0: PREFETCH window: 0x00000098d00000-0x00000098efffff
[ 0.451572] pci 0000:01:00.3: PCI bridge, secondary bus 0000:06
[ 0.451575] pci 0000:01:00.3: IO window: disabled
[ 0.451663] pci 0000:01:00.3: MEM window: disabled
[ 0.451710] pci 0000:01:00.3: PREFETCH window: disabled
[ 0.451756] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.451760] pci 0000:00:02.0: IO window: 0x3000-0x3fff
[ 0.451766] pci 0000:00:02.0: MEM window: 0x98000000-0x989fffff
[ 0.451771] pci 0000:00:02.0: PREFETCH window: 0x00000098d00000-0x00000098efffff
[ 0.451778] pci 0000:00:03.0: PCI bridge, secondary bus 0000:07
[ 0.451782] pci 0000:00:03.0: IO window: disabled
[ 0.451787] pci 0000:00:03.0: MEM window: disabled
[ 0.451791] pci 0000:00:03.0: PREFETCH window: disabled
[ 0.451798] pci 0000:00:04.0: PCI bridge, secondary bus 0000:08
[ 0.451802] pci 0000:00:04.0: IO window: 0x2000-0x2fff
[ 0.451807] pci 0000:00:04.0: MEM window: 0x98b00000-0x98bfffff
[ 0.451813] pci 0000:00:04.0: PREFETCH window: 0x98f00000-0x98ffffff
[ 0.451818] pci 0000:00:05.0: PCI bridge, secondary bus 0000:09
[ 0.451822] pci 0000:00:05.0: IO window: disabled
[ 0.451827] pci 0000:00:05.0: MEM window: disabled
[ 0.451840] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.451845] pci 0000:00:06.0: PCI bridge, secondary bus 0000:0a
[ 0.451848] pci 0000:00:06.0: IO window: disabled
[ 0.451853] pci 0000:00:06.0: MEM window: disabled
[ 0.451858] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.451863] pci 0000:00:07.0: PCI bridge, secondary bus 0000:0b
[ 0.451866] pci 0000:00:07.0: IO window: disabled
[ 0.451871] pci 0000:00:07.0: MEM window: disabled
[ 0.451876] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.451881] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
[ 0.451886] pci 0000:00:1e.0: IO window: 0x1000-0x1fff
[ 0.451892] pci 0000:00:1e.0: MEM window: 0x98a00000-0x98afffff
[ 0.451898] pci 0000:00:1e.0: PREFETCH window: 0x00000090000000-0x00000097ffffff
[ 0.451915] alloc irq_desc for 16 on node -1
[ 0.451917] alloc kstat_irqs on node -1
[ 0.451923] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.451929] pci 0000:00:02.0: setting latency timer to 64
[ 0.452081] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.452170] pci 0000:01:00.0: setting latency timer to 64
[ 0.452401] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.452492] pci 0000:02:00.0: setting latency timer to 64
[ 0.452722] pci 0000:02:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.452813] pci 0000:02:01.0: setting latency timer to 64
[ 0.453043] pci 0000:02:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.453134] pci 0000:02:02.0: setting latency timer to 64
[ 0.453409] pci 0000:01:00.3: setting latency timer to 64
[ 0.453459] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.453464] pci 0000:00:03.0: setting latency timer to 64
[ 0.453470] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.453476] pci 0000:00:04.0: setting latency timer to 64
[ 0.453482] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.453487] pci 0000:00:05.0: setting latency timer to 64
[ 0.453493] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.453498] pci 0000:00:06.0: setting latency timer to 64
[ 0.453504] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.453510] pci 0000:00:07.0: setting latency timer to 64
[ 0.453516] pci 0000:00:1e.0: setting latency timer to 64
[ 0.453520] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.453523] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.453525] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.453528] pci_bus 0000:01: resource 1 mem: [0x98000000-0x989fffff]
[ 0.453530] pci_bus 0000:01: resource 2 pref mem [0x98d00000-0x98efffff]
[ 0.453532] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.453535] pci_bus 0000:02: resource 1 mem: [0x98000000-0x988fffff]
[ 0.453537] pci_bus 0000:02: resource 2 pref mem [0x98d00000-0x98efffff]
[ 0.453539] pci_bus 0000:03: resource 2 pref mem [0x98d00000-0x98efffff]
[ 0.453542] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff]
[ 0.453544] pci_bus 0000:05: resource 1 mem: [0x98000000-0x988fffff]
[ 0.453547] pci_bus 0000:08: resource 0 io: [0x2000-0x2fff]
[ 0.453549] pci_bus 0000:08: resource 1 mem: [0x98b00000-0x98bfffff]
[ 0.453551] pci_bus 0000:08: resource 2 pref mem [0x98f00000-0x98ffffff]
[ 0.453554] pci_bus 0000:0c: resource 0 io: [0x1000-0x1fff]
[ 0.453556] pci_bus 0000:0c: resource 1 mem: [0x98a00000-0x98afffff]
[ 0.453558] pci_bus 0000:0c: resource 2 pref mem [0x90000000-0x97ffffff]
[ 0.453561] pci_bus 0000:0c: resource 3 io: [0x00-0xffff]
[ 0.453563] pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.453635] NET: Registered protocol family 2
[ 0.453858] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.455184] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.458942] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.459450] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.459455] TCP reno registered
[ 0.459647] NET: Registered protocol family 1
[ 0.459880] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
[ 0.459907] pci 0000:0c:0c.0: Boot video device
[ 0.459974] Trying to unpack rootfs image as initramfs...
[ 0.476779] Freeing initrd memory: 628k freed
[ 0.478722] Scanning for low memory corruption every 60 seconds
[ 0.479137] audit: initializing netlink socket (disabled)
[ 0.479158] type=2000 audit(1262436626.475:1): initialized
[ 0.486770] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.487000] VFS: Disk quotas dquot_6.5.2
[ 0.487038] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.487115] msgmni has been set to 7923
[ 0.487466] alg: No test for stdrng (krng)
[ 0.487551] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.487558] io scheduler noop registered
[ 0.487561] io scheduler anticipatory registered
[ 0.487582] io scheduler cfq registered (default)
[ 0.487777] alloc irq_desc for 48 on node -1
[ 0.487780] alloc kstat_irqs on node -1
[ 0.487792] pcieport 0000:00:02.0: irq 48 for MSI/MSI-X
[ 0.487799] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.488002] alloc irq_desc for 49 on node -1
[ 0.488004] alloc kstat_irqs on node -1
[ 0.488010] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
[ 0.488016] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.488195] alloc irq_desc for 50 on node -1
[ 0.488197] alloc kstat_irqs on node -1
[ 0.488202] pcieport 0000:00:04.0: irq 50 for MSI/MSI-X
[ 0.488208] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.488386] alloc irq_desc for 51 on node -1
[ 0.488388] alloc kstat_irqs on node -1
[ 0.488393] pcieport 0000:00:05.0: irq 51 for MSI/MSI-X
[ 0.488399] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.488577] alloc irq_desc for 52 on node -1
[ 0.488578] alloc kstat_irqs on node -1
[ 0.488584] pcieport 0000:00:06.0: irq 52 for MSI/MSI-X
[ 0.488590] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.488765] alloc irq_desc for 53 on node -1
[ 0.488767] alloc kstat_irqs on node -1
[ 0.488773] pcieport 0000:00:07.0: irq 53 for MSI/MSI-X
[ 0.488779] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.490308] pcieport 0000:01:00.0: setting latency timer to 64
[ 0.493844] alloc irq_desc for 54 on node -1
[ 0.493846] alloc kstat_irqs on node -1
[ 0.494072] pcieport 0000:02:00.0: irq 54 for MSI/MSI-X
[ 0.494347] pcieport 0000:02:00.0: setting latency timer to 64
[ 0.497884] alloc irq_desc for 55 on node -1
[ 0.497886] alloc kstat_irqs on node -1
[ 0.498113] pcieport 0000:02:01.0: irq 55 for MSI/MSI-X
[ 0.498388] pcieport 0000:02:01.0: setting latency timer to 64
[ 0.501833] alloc irq_desc for 56 on node -1
[ 0.501835] alloc kstat_irqs on node -1
[ 0.502061] pcieport 0000:02:02.0: irq 56 for MSI/MSI-X
[ 0.502336] pcieport 0000:02:02.0: setting latency timer to 64
[ 0.503931] aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.503938] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.503944] aer 0000:00:04.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.503951] aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.503957] aer 0000:00:06.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.503963] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.504271] vesafb: framebuffer at 0x90000000, mapped to 0xffffc90011100000, using 1875k, total 16384k
[ 0.504278] vesafb: mode is 800x600x16, linelength=1600, pages=16
[ 0.504281] vesafb: scrolling: redraw
[ 0.504286] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.540785] Console: switching to colour frame buffer device 100x37
[ 0.574609] fb0: VESA VGA frame buffer device
[ 0.618263] Linux agpgart interface v0.103
[ 0.618799] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.875929] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.132101] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.133445] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.134361] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.141556] brd: module loaded
[ 1.146232] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.152166] Fixed MDIO Bus: probed
[ 1.158303] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.168489] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.176019] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.184082] mice: PS/2 mouse device common for all mice
[ 1.192188] cpuidle: using governor ladder
[ 1.200504] cpuidle: using governor menu
[ 1.209254] TCP bic registered
[ 1.217985] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.218215] registered taskstats version 1
[ 1.238248] Freeing unused kernel memory: 592k freed
[ 1.499374] SCSI subsystem initialized
[ 1.542676] libata version 3.00 loaded.
[ 1.548330] alloc irq_desc for 20 on node -1
[ 1.548333] alloc kstat_irqs on node -1
[ 1.548343] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.561630] pata_acpi 0000:00:1f.1: setting latency timer to 64
[ 1.561643] pata_acpi 0000:00:1f.1: PCI INT A disabled
[ 1.582356] ahci 0000:00:1f.2: version 3.0
[ 1.582378] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.596525] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.611267] ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part
[ 1.626375] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.626792] scsi0 : ahci
[ 1.641542] scsi1 : ahci
[ 1.655732] scsi2 : ahci
[ 1.669593] scsi3 : ahci
[ 1.682987] scsi4 : ahci
[ 1.695914] scsi5 : ahci
[ 1.708915] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 20
[ 1.722539] ata2: SATA max UDMA/133 abar m1024@0x98c00000 port 0x98c00180 irq 20
[ 1.736517] ata3: SATA max UDMA/133 abar m1024@0x98c00000 port 0x98c00200 irq 20
[ 1.750130] ata4: SATA max UDMA/133 abar m1024@0x98c00000 port 0x98c00280 irq 20
[ 1.763126] ata5: SATA max UDMA/133 abar m1024@0x98c00000 port 0x98c00300 irq 20
[ 1.775496] ata6: SATA max UDMA/133 abar m1024@0x98c00000 port 0x98c00380 irq 20
[ 2.104016] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.104022] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.104047] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.104080] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.104106] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.676011] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.727881] ata1.00: ATA-7: ST3320620NS, 3.AEK, max UDMA/133
[ 2.738303] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.786198] ata1.00: configured for UDMA/133
[ 2.812139] scsi 0:0:0:0: Direct-Access ATA ST3320620NS 3.AE PQ: 0 ANSI: 5
[ 2.823010] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.834088] sd 0:0:0:0: [sda] Write Protect is off
[ 2.845082] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.845107] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.868061] sda: sda1 sda2 sda3
[ 2.895555] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.913502] ata_piix 0000:00:1f.1: version 2.13
[ 2.913518] ata_piix 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.925276] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.925371] scsi6 : ata_piix
[ 2.936683] scsi7 : ata_piix
[ 2.948774] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
[ 2.960008] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
[ 3.532356] kjournald starting. Commit interval 5 seconds
[ 3.544769] EXT3-fs: mounted filesystem with writeback data mode.
[ 4.746511] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 4.746519] ACPI: Power Button [PWRB]
[ 4.746601] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.746605] ACPI: Power Button [PWRF]
[ 4.786570] dca service started, version 1.12.1
[ 4.799237] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 4.799295] ioatdma 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.799336] ioatdma 0000:00:08.0: setting latency timer to 64
[ 4.799380] alloc irq_desc for 57 on node -1
[ 4.799382] alloc kstat_irqs on node -1
[ 4.799393] ioatdma 0000:00:08.0: irq 57 for MSI/MSI-X
[ 5.498279] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.501973] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 5.610719] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 5.610752] rtc_cmos 00:03: RTC can wake from S4
[ 5.610898] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 5.610929] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 5.648925] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 5.648928] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 5.649489] alloc irq_desc for 18 on node -1
[ 5.649492] alloc kstat_irqs on node -1
[ 5.649506] e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.650029] e1000e 0000:05:00.0: setting latency timer to 64
[ 5.652559] alloc irq_desc for 58 on node -1
[ 5.652561] alloc kstat_irqs on node -1
[ 5.652785] e1000e 0000:05:00.0: irq 58 for MSI/MSI-X
[ 5.666727] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.703563] Marking TSC unstable due to TSC halts in idle
[ 5.703680] processor LNXCPU:00: registered as cooling_device0
[ 5.703796] Switching to clocksource hpet
[ 5.704346] processor LNXCPU:01: registered as cooling_device1
[ 5.705741] processor LNXCPU:02: registered as cooling_device2
[ 5.705920] processor LNXCPU:03: registered as cooling_device3
[ 5.742424] EDAC MC: Ver: 2.1.0 Dec 31 2009
[ 5.743398] 0000:05:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:04:23:d6:b4:34
[ 5.743403] 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 5.743656] 0000:05:00.0: eth0: MAC: 5, PHY: 5, PBA No: 301000-001
[ 5.744214] alloc irq_desc for 19 on node -1
[ 5.744217] alloc kstat_irqs on node -1
[ 5.744227] e1000e 0000:05:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.744758] e1000e 0000:05:00.1: setting latency timer to 64
[ 5.747284] alloc irq_desc for 59 on node -1
[ 5.747286] alloc kstat_irqs on node -1
[ 5.747511] e1000e 0000:05:00.1: irq 59 for MSI/MSI-X
[ 5.774122] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
[ 5.774147] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
[ 5.791346] usbcore: registered new interface driver usbfs
[ 5.791398] usbcore: registered new interface driver hub
[ 5.791460] usbcore: registered new device driver usb
[ 5.834398] 0000:05:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:04:23:d6:b4:35
[ 5.834402] 0000:05:00.1: eth1: Intel(R) PRO/1000 Network Connection
[ 5.834480] 0000:05:00.1: eth1: MAC: 5, PHY: 5, PBA No: 301000-001
[ 5.834522] alloc irq_desc for 34 on node -1
[ 5.834525] alloc kstat_irqs on node -1
[ 5.834533] e1000e 0000:08:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
[ 5.834555] e1000e 0000:08:00.0: setting latency timer to 64
[ 5.834682] alloc irq_desc for 60 on node -1
[ 5.834684] alloc kstat_irqs on node -1
[ 5.834694] e1000e 0000:08:00.0: irq 60 for MSI/MSI-X
[ 5.899640] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.899695] alloc irq_desc for 23 on node -1
[ 5.899698] alloc kstat_irqs on node -1
[ 5.899708] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.899750] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.899754] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.899789] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 5.899827] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.903705] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.903727] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x98c00400
[ 5.909261] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.916281] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.916523] usb usb1: configuration #1 chosen from 1 choice
[ 5.916605] hub 1-0:1.0: USB hub found
[ 5.916615] hub 1-0:1.0: 8 ports detected
[ 5.916775] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.916786] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.916790] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.916799] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 5.916832] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
[ 5.916928] usb usb2: configuration #1 chosen from 1 choice
[ 5.916957] hub 2-0:1.0: USB hub found
[ 5.916965] hub 2-0:1.0: 2 ports detected
[ 5.917032] alloc irq_desc for 22 on node -1
[ 5.917035] alloc kstat_irqs on node -1
[ 5.917040] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 5.917048] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.917051] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.917063] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 5.917104] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004080
[ 5.917194] usb usb3: configuration #1 chosen from 1 choice
[ 5.917222] hub 3-0:1.0: USB hub found
[ 5.917229] hub 3-0:1.0: 2 ports detected
[ 5.917292] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 5.917300] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.917303] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.917310] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 5.917344] uhci_hcd 0000:00:1d.2: irq 23, io base 0x00004060
[ 5.917432] usb usb4: configuration #1 chosen from 1 choice
[ 5.917459] hub 4-0:1.0: USB hub found
[ 5.917467] hub 4-0:1.0: 2 ports detected
[ 5.917532] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 5.917539] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.917542] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.917549] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 5.917583] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00004040
[ 5.917674] usb usb5: configuration #1 chosen from 1 choice
[ 5.917701] hub 5-0:1.0: USB hub found
[ 5.917708] hub 5-0:1.0: 2 ports detected
[ 6.022861] 0000:08:00.0: eth2: (PCI Express:2.5GB/s:Width x4) 00:1b:78:58:a6:92
[ 6.022865] 0000:08:00.0: eth2: Intel(R) PRO/1000 Network Connection
[ 6.022942] 0000:08:00.0: eth2: MAC: 0, PHY: 4, PBA No: d51930-003
[ 6.022984] alloc irq_desc for 35 on node -1
[ 6.022986] alloc kstat_irqs on node -1
[ 6.022994] e1000e 0000:08:00.1: PCI INT B -> GSI 35 (level, low) -> IRQ 35
[ 6.023015] e1000e 0000:08:00.1: setting latency timer to 64
[ 6.023139] alloc irq_desc for 61 on node -1
[ 6.023141] alloc kstat_irqs on node -1
[ 6.023151] e1000e 0000:08:00.1: irq 61 for MSI/MSI-X
[ 6.198825] 0000:08:00.1: eth3: (PCI Express:2.5GB/s:Width x4) 00:1b:78:58:a6:93
[ 6.198829] 0000:08:00.1: eth3: Intel(R) PRO/1000 Network Connection
[ 6.198905] 0000:08:00.1: eth3: MAC: 0, PHY: 4, PBA No: d51930-003
[ 6.859148] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 7.019855] Adding 4088500k swap on /dev/sda1. Priority:-1 extents:1 across:4088500k
[ 7.192546] EXT3 FS on sda2, internal journal
[ 8.947761] device-mapper: uevent: version 1.0.3
[ 8.947963] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 9.613122] kjournald starting. Commit interval 5 seconds
[ 9.613374] EXT3 FS on sda3, internal journal
[ 9.613381] EXT3-fs: mounted filesystem with writeback data mode.
[ 12.638077] e1000e 0000:05:00.0: irq 58 for MSI/MSI-X
[ 12.693324] e1000e 0000:05:00.0: irq 58 for MSI/MSI-X
[ 12.814567] e1000e 0000:05:00.1: irq 59 for MSI/MSI-X
[ 12.869318] e1000e 0000:05:00.1: irq 59 for MSI/MSI-X
[ 13.084375] e1000e 0000:08:00.0: irq 60 for MSI/MSI-X
[ 13.140064] e1000e 0000:08:00.0: irq 60 for MSI/MSI-X
[ 13.356373] e1000e 0000:08:00.1: irq 61 for MSI/MSI-X
[ 13.412070] e1000e 0000:08:00.1: irq 61 for MSI/MSI-X
[ 13.526957] NET: Registered protocol family 10
[ 13.527535] lo: Disabled Privacy Extensions
[ 13.528109] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.528444] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 13.528787] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 13.529139] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 13.539225] Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
[ 13.539616] bonding: bond0 is being created...
[ 13.553102] ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 13.662207] bonding: bond0: setting mode to 802.3ad (4).
[ 13.669641] ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 13.872192] bonding: bond0: Adding slave eth2.
[ 14.064199] e1000e 0000:08:00.0: irq 60 for MSI/MSI-X
[ 14.120066] e1000e 0000:08:00.0: irq 60 for MSI/MSI-X
[ 14.121032] bonding: bond0: Warning: failed to get speed and duplex from eth2, assumed to be 100Mb/sec and Full.
[ 14.121035] bonding: bond0: Warning: Operation of 802.3ad mode requires ETHTOOL support in base driver for proper aggregator selection.
[ 14.121049] bonding: bond0: enslaving eth2 as a backup interface with an up link.
[ 14.325211] bonding: bond0: Adding slave eth3.
[ 14.516203] e1000e 0000:08:00.1: irq 61 for MSI/MSI-X
[ 14.572565] e1000e 0000:08:00.1: irq 61 for MSI/MSI-X
[ 14.573527] bonding: bond0: Warning: failed to get speed and duplex from eth3, assumed to be 100Mb/sec and Full.
[ 14.573530] bonding: bond0: Warning: Operation of 802.3ad mode requires ETHTOOL support in base driver for proper aggregator selection.
[ 14.573541] bonding: bond0: enslaving eth3 as a backup interface with an up link.
[ 14.918635] bonding: bond1 is being created...
[ 14.932361] ADDRCONF(NETDEV_UP): bond1: link is not ready
[ 14.986190] bonding: bond1: setting mode to 802.3ad (4).
[ 14.993612] ADDRCONF(NETDEV_UP): bond1: link is not ready
[ 15.096918] bonding: bond1: Adding slave eth0.
[ 15.174430] e1000e 0000:05:00.0: irq 58 for MSI/MSI-X
[ 15.229325] e1000e 0000:05:00.0: irq 58 for MSI/MSI-X
[ 15.231306] bonding: bond1: Warning: failed to get speed and duplex from eth0, assumed to be 100Mb/sec and Full.
[ 15.231309] bonding: bond1: Warning: Operation of 802.3ad mode requires ETHTOOL support in base driver for proper aggregator selection.
[ 15.231324] bonding: bond1: enslaving eth0 as a backup interface with an up link.
[ 15.332322] bonding: bond1: Adding slave eth1.
[ 15.410422] e1000e 0000:05:00.1: irq 59 for MSI/MSI-X
[ 15.465326] e1000e 0000:05:00.1: irq 59 for MSI/MSI-X
[ 15.467310] bonding: bond1: Warning: failed to get speed and duplex from eth1, assumed to be 100Mb/sec and Full.
[ 15.467312] bonding: bond1: Warning: Operation of 802.3ad mode requires ETHTOOL support in base driver for proper aggregator selection.
[ 15.467323] bonding: bond1: enslaving eth1 as a backup interface with an up link.
[ 15.588031] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 15.588035] All bugs added by David S. Miller <davem@redhat.com>
[ 16.253408] e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 16.257095] ipmi message handler version 39.2
[ 16.259203] IPMI System Interface driver.
[ 16.259208] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[ 16.293273] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 16.440376] ipmi: Found new BMC (man_id: 0x000157, prod_id: 0x0028, dev_id: 0x20)
[ 16.440386] IPMI kcs interface initialized
[ 16.466142] coretemp coretemp.0: Using relative temperature scale!
[ 16.466487] coretemp coretemp.1: Using relative temperature scale!
[ 16.467023] coretemp coretemp.2: Using relative temperature scale!
[ 16.467758] coretemp coretemp.3: Using relative temperature scale!
[ 16.677651] e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 18.019951] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 18.092806] ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready
[ 18.229420] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 26.248023] vlan61: no IPv6 routers present
[ 26.316038] vlan62: no IPv6 routers present
[ 26.784769] vlan65: no IPv6 routers present
[ 27.180022] bond0: no IPv6 routers present
[ 28.156019] bond1: no IPv6 routers present