Miscellany

egacy
[    1.351527] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    1.508474] Fixed MDIO Bus: probed
[    1.514313] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.523310] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.531755] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.537765] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.543762] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.549675] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.555585] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.561477] mice: PS/2 mouse device common for all mice
[    1.567316] lirc_dev: IR Remote Control driver registered, major 253 
[    1.573078] cpuidle: using governor ladder
[    1.579113] TCP bic registered
[    1.584811] NET: Registered protocol family 17
[    1.590669] Using IPI No-Shortcut mode
[    1.596677] TuxOnIce core not loaded yet.
[    1.603700] Freeing unused kernel memory: 392k freed
[    1.609890] input: AT Translated Set 2 keyboard as /class/input/input0
[    1.616011] Write protecting the kernel text: 4144k
[    1.622259] Write protecting the kernel read-only data: 1816k
[    1.628358] ZenSched: Using BFS CPU scheduler v311 by Con Kolivas.
[    1.798384] thermal LNXTHERM:01: registered as thermal_zone0
[    1.804755] ACPI: Thermal Zone [TZ00] (49 C)
[    1.963789] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.971128] sd 0:0:0:0: [sda] Write Protect is off
[    1.982740] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.990274] Uniform CD-ROM driver Revision: 3.20
[    1.997947] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.998008] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.998067] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.009286]  sda: sda1 sda2 sda3 sda4
[    2.070141] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.148352] usbcore: registered new interface driver usbfs
[    2.155535] usbcore: registered new interface driver hub
[    2.162622] usbcore: registered new device driver usb
[    2.172054] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.178860] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.191589] uhci_hcd: USB Universal Host Controller Interface driver
[    2.198427] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.200816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.200819] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    2.218698] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.218704] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.239540] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.246275] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[    2.263329] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    2.269824] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.276398] usb usb1: Product: UHCI Host Controller
[    2.283054] usb usb1: Manufacturer: Linux 2.6.32-oshirix-spe uhci_hcd
[    2.289570] usb usb1: SerialNumber: 0000:00:1a.0
[    2.296073] usb usb1: configuration #1 chosen from 1 choice
[    2.320944] hub 1-0:1.0: USB hub found
[    2.327480] hub 1-0:1.0: 2 ports detected
[    2.334012] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    2.340704] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    2.340710] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    2.347685] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2
[    2.354393] ehci_hcd 0000:00:1a.7: debug port 1
[    2.382159] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    2.382182] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf4a04800
[    2.420262] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    2.426780] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.433344] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.440284] usb usb2: Product: EHCI Host Controller
[    2.446911] usb usb2: Manufacturer: Linux 2.6.32-oshirix-spe ehci_hcd
[    2.468007] usb usb2: SerialNumber: 0000:00:1a.7
[    2.474699] usb usb2: configuration #1 chosen from 1 choice
[    2.481664] hub 2-0:1.0: USB hub found
[    2.488448] hub 2-0:1.0: 6 ports detected
[    2.495158] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.501811] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    2.501816] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.508477] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[    2.519308] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[    2.541435] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.548079] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.554527] usb usb3: Product: UHCI Host Controller
[    2.560761] usb usb3: Manufacturer: Linux 2.6.32-oshirix-spe uhci_hcd
[    2.567149] usb usb3: SerialNumber: 0000:00:1a.1
[    2.573204] usb usb3: configuration #1 chosen from 1 choice
[    2.595087] hub 3-0:1.0: USB hub found
[    2.601190] hub 3-0:1.0: 2 ports detected
[    2.607138] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.613302] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.613307] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.615667] sdhci: Secure Digital Host Controller Interface driver
[    2.615669] sdhci: Copyright(c) Pierre Ossman
[    2.645475] sdhci-pci 0000:05:00.0: SDHCI controller found [197b:2382] (rev 0)
[    2.651540] sdhci-pci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.657566] sdhci-pci 0000:05:00.0: setting latency timer to 64
[    2.657621] Registered led device: mmc0::
[    2.658273] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[    2.658310] ehci_hcd 0000:00:1d.7: debug port 1
[    2.662203] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    2.662219] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4a04c00
[    2.675405] tg3.c:v3.102 (September 1, 2009)
[    2.675478] tg3 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.675496] tg3 0000:07:00.0: setting latency timer to 64
[    2.693281] mmc0: SDHCI controller on PCI [0000:05:00.0] using ADMA
[    2.699276] sdhci-pci 0000:05:00.2: SDHCI controller found [197b:2381] (rev 0)
[    2.709248] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.715302] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    2.721453] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.727351] usb usb4: Product: EHCI Host Controller
[    2.733233] usb usb4: Manufacturer: Linux 2.6.32-oshirix-spe ehci_hcd
[    2.734141] sdhci-pci 0000:05:00.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.734156] sdhci-pci 0000:05:00.2: Refusing to bind to secondary interface.
[    2.734164] sdhci-pci 0000:05:00.2: PCI INT A disabled
[    2.771269] usb usb4: SerialNumber: 0000:00:1d.7
[    2.771816] b43-pci-bridge 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.771828] b43-pci-bridge 0000:06:00.0: setting latency timer to 64
[    2.783449] usb usb4: configuration #1 chosen from 1 choice
[    2.789815] hub 4-0:1.0: USB hub found
[    2.796119] hub 4-0:1.0: 6 ports detected
[    2.802436] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    2.809249] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    2.809255] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    2.815463] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    2.821706] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[    2.841591] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.847905] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.854207] usb usb5: Product: UHCI Host Controller
[    2.860340] usb usb5: Manufacturer: Linux 2.6.32-oshirix-spe uhci_hcd
[    2.866878] usb usb5: SerialNumber: 0000:00:1a.2
[    2.871349] ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0
[    2.880078] usb usb5: configuration #1 chosen from 1 choice
[    2.894341] hub 5-0:1.0: USB hub found
[    2.901082] hub 5-0:1.0: 2 ports detected
[    2.907892] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.914610] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.914615] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.920894] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    2.927560] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[    2.939067] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.945557] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.947854] eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:23:8b:e7:88:ef
[    2.947858] eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[    2.947860] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[    2.947863] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.950096] udev: renamed network interface eth0 to eth1
[    2.987145] usb usb6: Product: UHCI Host Controller
[    2.994021] usb usb6: Manufacturer: Linux 2.6.32-oshirix-spe uhci_hcd
[    3.000520] usb usb6: SerialNumber: 0000:00:1d.0
[    3.007393] usb usb6: configuration #1 chosen from 1 choice
[    3.014068] hub 6-0:1.0: USB hub found
[    3.020304] hub 6-0:1.0: 2 ports detected
[    3.026554] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.032826] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.032831] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.038978] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    3.045172] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[    3.051586] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    3.057725] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.063826] usb usb7: Product: UHCI Host Controller
[    3.069878] usb usb7: Manufacturer: Linux 2.6.32-oshirix-spe uhci_hcd
[    3.075941] usb usb7: SerialNumber: 0000:00:1d.1
[    3.082047] usb usb7: configuration #1 chosen from 1 choice
[    3.088159] hub 7-0:1.0: USB hub found
[    3.094204] hub 7-0:1.0: 2 ports detected
[    3.100220] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.106234] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.106239] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.112199] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    3.115017] usb 4-3: new high speed USB device using ehci_hcd and address 2
[    3.124371] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[    3.130437] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    3.136536] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.142644] usb usb8: Product: UHCI Host Controller
[    3.148686] usb usb8: Manufacturer: Linux 2.6.32-oshirix-spe uhci_hcd
[    3.154804] usb usb8: SerialNumber: 0000:00:1d.2
[    3.160889] usb usb8: configuration #1 chosen from 1 choice
[    3.167048] hub 8-0:1.0: USB hub found
[    3.173012] hub 8-0:1.0: 2 ports detected
[    3.248078] usb 4-3: New USB device found, idVendor=090c, idProduct=3371
[    3.254072] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.260047] usb 4-3: Product: Lenovo EasyCamera
[    3.266090] usb 4-3: Manufacturer: Image Processor
[    3.272039] usb 4-3: configuration #1 chosen from 1 choice
[    3.380177] REISERFS (device sda4): found reiserfs format "3.6" with standard journal
[    3.386322] REISERFS (device sda4): using ordered data mode
[    3.407133] REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    3.419720] REISERFS (device sda4): checking transaction log (sda4)
[    3.450246] REISERFS (device sda4): Using r5 hash to sort names
[    5.006398] udevd version 125 started
[    5.774458] Linux agpgart interface v0.103
[    5.898647] agpgart-intel 0000:00:00.0: Intel Mobile Intel GM45 Express Chipset
[    5.905898] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[    5.936564] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    6.618728] ACPI: SSDT 37b1ac20 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    6.644690] ACPI: SSDT 37b18620 00549 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    6.694912] ACPI: WMI: Mapper loaded
[    6.782011] Monitor-Mwait will be used to enter C-1 state
[    6.792816] Monitor-Mwait will be used to enter C-2 state
[    6.792905] Marking TSC unstable due to TSC halts in idle
[    6.800039] processor LNXCPU:00: registered as cooling_device0
[    6.842381] ACPI: SSDT 37b19ca0 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    6.849774] ACPI: SSDT 37b19f20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    6.878393] Switching to clocksource hpet
[    6.909638] input: Lid Switch as /class/input/input1
[    6.954194] processor LNXCPU:01: registered as cooling_device1
[    6.992351] ACPI: Lid Switch [LID]
[    6.998995] input: Power Button as /class/input/input2
[    7.041322] ACPI: Power Button [PWRB]
[    7.047942] input: Sleep Button as /class/input/input3
[    7.054580] ACPI: Sleep Button [SLPB]
[    7.100136] input: Power Button as /class/input/input4
[    7.106781] ACPI: Power Button [PWRF]
[    7.158527] ACPI: AC Adapter [ACAD] (on-line)
[    7.281571] iTCO_vendor_support: vendor-support=0
[    7.350027] jmb38x_ms 0000:05:00.3: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    7.389269] jmb38x_ms 0000:05:00.3: setting latency timer to 64
[    7.402514] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    7.419265] ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
[    7.459190] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.743443] input: PC Speaker as /class/input/input5
[    8.817121] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x25c0b1, caps: 0xa04711/0xa00000
[    8.880659] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[    8.907953] ACPI: Battery Slot [BAT1] (battery present)
[    8.919062] Driver 'rtc_cmos' needs updating - please use bus_type methods
[    8.926857] rtc_cmos 00:06: RTC can wake from S4
[    8.934366] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    8.941587] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    8.955379] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[    8.962650] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[    8.969882] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.016604] Linux video capture interface: v2.00
[    9.095373] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (090c:3371)
[    9.103921] input: Lenovo EasyCamera as /class/input/input7
[    9.112100] usbcore: registered new interface driver uvcvideo
[    9.119906] USB Video Class driver (v0.1.0)
[    9.455429] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    9.462664] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    9.829943] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[   10.306979] Adding 128512k swap on /dev/sda3.  Priority:-1 extents:1 across:128512k 
[   10.935072] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[   10.942414] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[   10.949631] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[   15.769609] fuse init (API version 7.13)
[   15.926524] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   15.979769] usbcore: registered new interface driver libusual
[   16.050906] Initializing USB Mass Storage driver...
[   16.056804] usbcore: registered new interface driver usb-storage
[   16.062654] USB Mass Storage support registered.
[   16.143542] loop: AES key scrubbing enabled
[   16.149456] loop: loaded (max 8 devices)
[   16.199271] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   16.726148] cfg80211: Calling CRDA to update world regulatory domain
[   16.853991] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[   17.045319] phy0: Selected rate control algorithm 'minstrel'
[   17.045700] Registered led device: b43-phy0::tx
[   17.047360] udev: renamed network interface wlan0 to wlan1
[   17.052088] Registered led device: b43-phy0::rx
[   17.066104] Registered led device: b43-phy0::radio
[   17.069252] Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
[   17.098484] b43 ssb0:0: firmware: requesting b43/ucode15.fw
[   17.144255] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw
[   17.159341] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   17.167559] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw
[   17.325484] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[   17.497837] NET: Registered protocol family 10
[   18.735586] lo: Disabled Privacy Extensions
[   18.740732] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   18.965380] ramzswap: NUM_DEVICES not specified. Using default: 1
[   18.970351] ramzswap: Creating 1 devices ...
[   19.064907] [drm] Initialized drm 1.1.0 20060810
[   19.117089] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.122611] pci 0000:00:02.0: setting latency timer to 64
[   19.134536] pci 0000:00:02.0: irq 30 for MSI/MSI-X
[   19.137116] acpi device:04: registered as cooling_device2
[   19.138567] input: Video Bus as /class/input/input8
[   19.139684] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   19.140808] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   19.767901] device-mapper: uevent: version 1.0.3
[   19.770053] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[   27.867689] tg3 0000:07:00.0: irq 31 for MSI/MSI-X
[   27.901398] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   70.680333] psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
[  105.614835] b43-phy0 ERROR: Fatal DMA error: 0x00000800, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  105.614847] b43-phy0: Controller RESET (DMA error) ...
[  105.771267] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  107.164328] b43-phy0: 
[  107.164333] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  107.164343] b43-phy0: Controller RESET (DMA error) ...
[  107.164349] Controller restarted
[  107.331243] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  108.735326] b43-phy0: 
[  108.735331] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  108.735340] b43-phy0: Controller RESET (DMA error) ...
[  108.735370] Controller restarted
[  108.735372] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  108.735380] b43-phy0: Controller RESET (DMA error) ...
[  108.891537] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  110.439259] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  111.835280] __ratelimit: 3 callbacks suppressed
[  111.835287] b43-phy0: Controller restarted
[  111.835322] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  111.835333] b43-phy0: Controller RESET (DMA error) ...
[  111.991286] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  113.384793] b43-phy0: Controller restarted
[  114.015291] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  115.413411] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  115.413424] b43-phy0: Controller RESET (DMA error) ...
[  115.569259] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  116.964315] b43-phy0: 
[  116.964320] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  116.964330] b43-phy0: Controller RESET (DMA error) ...
[  116.964336] Controller restarted
[  117.120507] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  118.514113] b43-phy0 ERROR: 
[  118.514119] b43-phy0: Controller restarted
[  118.514126] Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  118.514132] b43-phy0: Controller RESET (DMA error) ...
[  118.514787] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  118.691511] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  120.090106] b43-phy0: Controller restarted
[  120.090121] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  120.090133] b43-phy0: Controller RESET (DMA error) ...
[  120.102624] wlan1: deauthenticating from 00:1d:0f:cc:d0:0e by local choice (reason=3)
[  120.102743] wlan1: deauthenticating from 00:1d:0f:cc:d0:0e by local choice (reason=3)
[  120.270478] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  121.669303] b43-phy0: Controller restarted
[  121.678522] wlan1: direct probe to AP 00:1d:0f:cc:d0:0e (try 1)
[  121.834511] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  123.234335] __ratelimit: 2 callbacks suppressed
[  123.234342] b43-phy0: 
[  123.234346] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  123.234356] b43-phy0: Controller RESET (DMA error) ...
[  123.234362] Controller restarted
[  123.234371] wlan1: direct probe to AP 00:1d:0f:cc:d0:0e (try 2)
[  123.390271] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  124.786063] b43-phy0: Controller restarted
[  124.786101] wlan1: direct probe to AP 00:1d:0f:cc:d0:0e (try 3)
[  124.786752] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  124.786765] b43-phy0: Controller RESET (DMA error) ...
[  124.944510] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  126.342333] b43-phy0 ERROR: 
[  126.342338] b43-phy0: Controller restarted
[  126.342349] Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  126.342355] wlan1: direct probe to AP 00:1d:0f:cc:d0:0e timed out
[  126.342361] b43-phy0: Controller RESET (DMA error) ...
[  126.508292] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  127.904336] b43-phy0: Controller restarted
[  128.061291] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  129.464537] __ratelimit: 2 callbacks suppressed
[  129.464545] b43-phy0: Controller restarted
[  129.464585] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  129.464595] b43-phy0: Controller RESET (DMA error) ...
[  129.622290] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  131.018316] b43-phy0: Controller restarted
[  131.018335] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  131.018347] b43-phy0: Controller RESET (DMA error) ...
[  131.174508] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  132.572115] b43-phy0: 
[  132.572126] b43-phy0 ERROR: Controller restarted
[  132.572134] Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  132.572139] b43-phy0: Controller RESET (DMA error) ...
[  132.728479] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  134.131300] b43-phy0: Controller restarted
[  134.287496] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  135.686985] __ratelimit: 2 callbacks suppressed
[  135.686993] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  135.687003] b43-phy0: Controller RESET (DMA error) ...
[  135.687011] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  135.687020] b43-phy0: Controller RESET (DMA error) ...
[  135.687028] b43-phy0: Controller restarted
[  135.846509] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  137.243096] b43-phy0: Controller restarted
[  137.243113] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  137.243144] b43-phy0: Controller RESET (DMA error) ...
[  137.243153] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  137.243161] b43-phy0: Controller RESET (DMA error) ...
[  137.399265] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  138.961236] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  140.514264] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  141.914335] __ratelimit: 4 callbacks suppressed
[  141.914344] b43-phy0: 
[  141.914348] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  141.914358] b43-phy0: Controller RESET (DMA error) ...
[  141.914364] Controller restarted
[  142.070260] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  143.473088] b43-phy0: 
[  143.473093] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  143.473103] b43-phy0: Controller RESET (DMA error) ...
[  143.473109] Controller restarted
[  143.629511] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  145.024330] b43-phy0 ERROR: 
[  145.024335] b43-phy0: Controller restarted
[  145.024345] Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  145.024351] b43-phy0: Controller RESET (DMA error) ...
[  145.182508] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  146.578337] b43-phy0: Controller restarted
[  146.734264] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  148.130089] __ratelimit: 2 callbacks suppressed
[  148.130097] b43-phy0: 
[  148.130100] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  148.130110] b43-phy0: Controller RESET (DMA error) ...
[  148.130116] Controller restarted
[  148.286496] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  149.686097] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  149.686112] b43-phy0: Controller RESET (DMA error) ...
[  149.686121] b43-phy0: Controller restarted
[  149.845263] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  151.240084] b43-phy0: 
[  151.240090] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  151.240099] b43-phy0: Controller RESET (DMA error) ...
[  151.240105] Controller restarted
[  151.396513] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  152.792321] b43-phy0: Controller restarted
[  152.948510] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  154.344334] __ratelimit: 2 callbacks suppressed
[  154.344342] b43-phy0: 
[  154.344346] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  154.344355] b43-phy0: Controller RESET (DMA error) ...
[  154.344362] Controller restarted
[  154.500264] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  155.904092] b43-phy0 ERROR: 
[  155.904097] b43-phy0: Controller restarted
[  155.904106] Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  155.904112] b43-phy0: Controller RESET (DMA error) ...
[  156.060262] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  157.460092] b43-phy0: 
[  157.460098] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  157.460108] b43-phy0: Controller RESET (DMA error) ...
[  157.460114] Controller restarted
[  157.616493] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  159.012315] b43-phy0: Controller restarted
[  159.168492] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  160.563311] __ratelimit: 2 callbacks suppressed
[  160.563318] b43-phy0: Controller restarted
[  160.563354] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  160.563366] b43-phy0: Controller RESET (DMA error) ...
[  160.563375] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  160.563384] b43-phy0: Controller RESET (DMA error) ...
[  160.719259] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  162.113082] b43-phy0 ERROR: 
[  162.113088] b43-phy0: Controller restarted
[  162.113096] Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  162.113102] b43-phy0: Controller RESET (DMA error) ...
[  162.269507] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  163.663085] b43-phy0 ERROR: 
[  163.663090] b43-phy0: Controller restarted
[  163.663099] Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  163.824514] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  165.379259] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  166.773314] __ratelimit: 4 callbacks suppressed
[  166.773321] b43-phy0: Controller restarted
[  166.773332] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  166.773343] b43-phy0: Controller RESET (DMA error) ...
[  166.929240] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  168.324330] b43-phy0: 
[  168.324336] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  168.324345] b43-phy0: Controller RESET (DMA error) ...
[  168.324352] Controller restarted
[  168.480258] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  169.874336] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  169.874348] b43-phy0: Controller RESET (DMA error) ...
[  169.874356] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  169.874365] b43-phy0: Controller RESET (DMA error) ...
[  170.033508] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  171.583260] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[  172.978068] __ratelimit: 4 callbacks suppressed
[  172.978076] b43-phy0: Controller restarted
[  172.978086] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  172.978098] b43-phy0: Controller RESET (DMA error) ...
[  172.978110] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[  172.978119] b43-phy0: Controller RESET (DMA error) ...
[  173.134510] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)