rendered paste bodyLinux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 18:10:38 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fffc000 (usable)
BIOS-e820: 000000002fffc000 - 000000002ffff000 (ACPI data)
BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x2fffc max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 020000000 mask FF0000000 write-back
2 base 0F0000000 mask FFC000000 write-combining
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000002fffc000 (usable)
modified: 000000002fffc000 - 000000002ffff000 (ACPI data)
modified: 000000002ffff000 - 0000000030000000 (ACPI NVS)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffff0000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-000000002fffc000
0000000000 - 0000400000 page 4k
0000400000 - 002fc00000 page 2M
002fc00000 - 002fffc000 page 4k
kernel direct mapping tables up to 2fffc000 @ 7000-c000
RAMDISK: 2ff50000 - 2ffebe4c
ACPI: RSDP 000f58d0 00014 (v00 ASUS )
ACPI: RSDT 2fffc000 00030 (v01 ASUS P4S533-E 42302E31 MSFT 31313031)
ACPI: FACP 2fffc0b2 00074 (v01 ASUS P4S533-E 42302E31 MSFT 31313031)
ACPI: DSDT 2fffc126 0271B (v01 ASUS P4S533-E 00001000 MSFT 0100000B)
ACPI: FACS 2ffff000 00040
ACPI: BOOT 2fffc030 00028 (v01 ASUS P4S533-E 42302E31 MSFT 31313031)
ACPI: APIC 2fffc058 0005A (v01 ASUS P4S533-E 42302E31 MSFT 31313031)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
767MB LOWMEM available.
mapped low ram: 0 - 2fffc000
low ram: 0 - 2fffc000
node 0 low ram: 00000000 - 2fffc000
node 0 bootmap 00008000 - 0000e000
(9 early reservations) ==> bootmem [0000000000 - 002fffc000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000624e44] TEXT DATA BSS ==> [0000100000 - 0000624e44]
#4 [002ff50000 - 002ffebe4c] RAMDISK ==> [002ff50000 - 002ffebe4c]
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#6 [0000625000 - 0000627150] BRK ==> [0000625000 - 0000627150]
#7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#8 [0000008000 - 000000e000] BOOTMAP ==> [0000008000 - 000000e000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0002fffc
HighMem 0x0002fffc -> 0x0002fffc
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000006 -> 0x0000009f
0: 0x00000100 -> 0x0002fffc
On node 0 totalpages: 196503
free_area_init_node: node 0, pgdat c04c0380, node_mem_map c1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3963 pages, LIFO batch:0
Normal zone: 1504 pages used for memmap
Normal zone: 191004 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 11 pages at c1604000, static data 24444 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194967
Kernel command line: root=/dev/disk/by-uuid/02df557f-a304-4758-a77c-8dbc196c24a5 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 2000.400 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (00000000:00000000)
Memory: 772904k/786416k available (2894k kernel code, 12932k reserved, 1051k data, 392k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf07fc000 - 0xff7fe000 ( 240 MB)
lowmem : 0xc0000000 - 0xefffc000 ( 767 MB)
.init : 0xc04e1000 - 0xc0543000 ( 392 kB)
.data : 0xc03d396f - 0xc04da6a8 (1051 kB)
.text : 0xc0100000 - 0xc03d396f (2894 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4002.50 BogoMIPS (lpj=6668000)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 10k freed
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
Brought up 1 CPUs
Total of 1 processors activated (4002.50 BogoMIPS).
CPU0 attaching NULL sched-domain.
net_namespace: 1056 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf11e0, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf3ffffff]
pci 0000:00:02.0: Enabling SiS 96x SMBus
pci 0000:00:02.1: reg 20 io port: [0xe600-0xe61f]
pci 0000:00:02.5: reg 10 io port: [0xd800-0xd807]
pci 0000:00:02.5: reg 14 io port: [0xd400-0xd403]
pci 0000:00:02.5: reg 18 io port: [0xd000-0xd007]
pci 0000:00:02.5: reg 1c io port: [0xb800-0xb803]
pci 0000:00:02.5: reg 20 io port: [0xb400-0xb40f]
pci 0000:00:03.0: reg 10 32bit mmio: [0xef000000-0xef000fff]
pci 0000:00:03.1: reg 10 32bit mmio: [0xee800000-0xee800fff]
pci 0000:00:03.2: reg 10 32bit mmio: [0xee000000-0xee000fff]
pci 0000:00:03.3: reg 10 32bit mmio: [0xed800000-0xed800fff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:05.0: reg 10 io port: [0x9400-0x94ff]
pci 0000:00:05.0: supports D1 D2
pci 0000:00:09.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
pci 0000:00:09.0: reg 14 32bit mmio: [0xf7800000-0xf787ffff]
pci 0000:00:09.0: reg 18 io port: [0x9000-0x90ff]
pci 0000:00:09.0: reg 30 32bit mmio: [0xf77e0000-0xf77fffff]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:0b.0: reg 10 32bit mmio: [0xec800000-0xec800fff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: reg 10 32bit mmio: [0xec000000-0xec000fff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0b.1: PME# disabled
pci 0000:00:0b.2: reg 10 32bit mmio: [0xeb800000-0xeb8000ff]
pci 0000:00:0b.2: supports D1 D2
pci 0000:00:0b.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0b.2: PME# disabled
pci 0000:00:0c.0: reg 10 io port: [0x8800-0x881f]
pci 0000:00:0c.0: supports D1 D2
pci 0000:00:0c.1: reg 10 io port: [0x8400-0x8407]
pci 0000:00:0c.1: supports D1 D2
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x2fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:02: ioport range 0xe400-0xe47f has been reserved
system 00:02: ioport range 0xe480-0xe4ff has been reserved
system 00:02: ioport range 0xe600-0xe61f has been reserved
system 00:02: ioport range 0x480-0x48f has been reserved
system 00:02: iomem range 0xffee0000-0xffefffff has been reserved
system 00:03: iomem range 0xfffe0000-0xffffffff could not be reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:0d: ioport range 0x3f0-0x3f1 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: disabled
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 623k freed
Simple Boot Flag at 0x3a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1261409977.289:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1511
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:09.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 392k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Switched to high resolution mode on CPU 0
SCSI subsystem initialized
libata version 3.00 loaded.
pata_sis 0000:00:02.5: version 0.5.2
pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xb400 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xb408 irq 15
ata1.00: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133
ata1.00: 80293248 sectors, multi 16: LBA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5
ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8161B, 0100, max UDMA/33
ata2.01: ATAPI: HL-DT-ST RW/DVD GCC-4320B, 1.00, max UDMA/33
ata2.00: configured for UDMA/33
ata2.01: configured for UDMA/33
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8161B 0100 PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM HL-DT-ST RW/DVD GCC-4320B 1.00 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 80293248 512-byte hardware sectors: (41.1 GB/38.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>Driver 'sr' needs updating - please use bus_type methods
sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
EXT4-fs: barriers enabled
kjournald2 starting: pid 456, dev sda2:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda2 with ordered data mode
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram
udev: starting version 141
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Linux agpgart interface v0.103
agpgart-sis 0000:00:00.0: SiS chipset [1039/0646]
agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sr 1:0:1:0: Attached scsi generic sg2 type 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Emu10k1_gameport 0000:00:0c.1: enabling device (0004 -> 0005)
gameport: EMU10K1 is pci0000:00:0c.1/gameport0, io 0x8400, speed 1028kHz
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
ACPI: Invalid PBLK length [5]
processor ACPI_CPU:00: registered as cooling_device0
input: PC Speaker as /devices/platform/pcspkr/input/input4
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:03.3: enabling device (0004 -> 0006)
ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: cache line size of 128 is not supported
ehci_hcd 0000:00:03.3: irq 23, io mem 0xed800000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:0b.2: enabling device (0014 -> 0016)
ehci_hcd 0000:00:0b.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:0b.2: EHCI Host Controller
ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 2
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd 0000:00:0b.2: irq 17, io mem 0xeb800000
lp: driver loaded but no devices found
ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.0: irq 20, io mem 0xef000000
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.1: irq 21, io mem 0xee800000
lp0: using parport0 (interrupt-driven).
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:03.2: irq 22, io mem 0xee000000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
C-Media PCI 0000:00:05.0: enabling device (0084 -> 0085)
C-Media PCI 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:0b.0: enabling device (0014 -> 0016)
ohci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:0b.0: irq 19, io mem 0xec800000
ppdev: user-space parallel port driver
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:0b.1: enabling device (0014 -> 0016)
ohci_hcd 0000:00:0b.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:0b.1: OHCI Host Controller
ohci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:0b.1: irq 16, io mem 0xec000000
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
EMU10K1_Audigy 0000:00:0c.0: enabling device (0004 -> 0005)
EMU10K1_Audigy 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
usb 1-4: new high speed USB device using ehci_hcd and address 4
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
usb 1-4: configuration #1 chosen from 1 choice
usb 1-1: reset high speed USB device using ehci_hcd and address 2
usb 1-1: firmware: requesting isl3887usb
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb 1-1: p54usb: cannot find firmware (isl3887usb)
usb 1-1: firmware: requesting isl3887usb_bare
p54usb: probe of 1-1:1.0 failed with error -2
usbcore: registered new interface driver p54usb
usb 5-1: new low speed USB device using ohci_hcd and address 2
EXT4 FS on sda2, internal journal on sda2:8
Adding 979956k swap on /dev/sda3. Priority:-1 extents:1 across:979956k
usb 5-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: USB Mouse as /devices/pci0000:00/0000:00:03.2/usb5/5-1/5-1:1.0/input/input5
generic-usb 0003:05E3:1205.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:03.2-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
scsi 2:0:0:0: Direct-Access 8.07 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
sd 2:0:0:0: [sdb] 15974400 512-byte hardware sectors: (8.17 GB/7.61 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
usb 1-1: USB disconnect, address 2
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 3-1: not running at top speed; connect to a high speed hub
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: reset full speed USB device using ohci_hcd and address 2
usb 3-1: firmware: requesting isl3887usb
phy1: p54 detected a LM87 firmware
p54: rx_mtu reduced from 3240 to 2376
phy1: FW rev 2.13.24.0 - Softmac protocol 5.9
phy1: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES
phy1: hwaddr 00:0b:6b:6d:65:9f, MAC:isl3887 RF:Frisbee
phy1: Selected rate control algorithm 'minstrel'
Registered led device: p54-phy1::assoc
Registered led device: p54-phy1::tx
usb 3-1: is registered as 'phy1'
usb 3-1: USB disconnect, address 2
usb 1-1: new high speed USB device using ehci_hcd and address 6
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: reset high speed USB device using ehci_hcd and address 6
usb 1-1: firmware: requesting isl3887usb
phy2: p54 detected a LM87 firmware
p54: rx_mtu reduced from 3240 to 2376
phy2: FW rev 2.13.24.0 - Softmac protocol 5.9
phy2: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES
phy2: hwaddr 00:0b:6b:6d:65:9f, MAC:isl3887 RF:Frisbee
phy2: Selected rate control algorithm 'minstrel'
Registered led device: p54-phy2::assoc
Registered led device: p54-phy2::tx
usb 1-1: is registered as 'phy2'
usb 1-1: USB disconnect, address 6
usb 1-1: new high speed USB device using ehci_hcd and address 7
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: reset high speed USB device using ehci_hcd and address 7
usb 1-1: firmware: requesting isl3887usb
phy3: p54 detected a LM87 firmware
p54: rx_mtu reduced from 3240 to 2376
phy3: FW rev 2.13.24.0 - Softmac protocol 5.9
phy3: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES
phy3: hwaddr 00:0b:6b:6d:65:9f, MAC:isl3887 RF:Frisbee
phy3: Selected rate control algorithm 'minstrel'
Registered led device: p54-phy3::assoc
Registered led device: p54-phy3::tx
usb 1-1: is registered as 'phy3'