rendered paste bodyntries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62336KB available (1916K code, 397K data, 196K init)
Calibrating delay loop... 415.33 BogoMIPS (lpj=2076672)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Sharp Scoop Device found at 0x10800000 -> 0xc4800000
Sharp Scoop Device found at 0x08800040 -> 0xc4802040
NetWinder Floating Point Emulator V0.97 (double precision)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
Corgi Backlight Driver Initialized.
Console: switching to colour frame buffer device 80x30
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Sharp SL series flash device: 800000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00140000-0x007f0000 : "Boot PROM Filesystem"
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
Scanning device for bad blocks
Creating 3 MTD partitions on "sharpsl-nand":
0x00000000-0x00700000 : "System Area"
0x00700000-0x02700000 : "Root Filesystem"
0x02700000-0x08000000 : "Home Filesystem"
input: Spitz Keyboard as /class/input/input0
input: Spitz Keyboard Registered
input: Corgi Touchscreen as /class/input/input1
sa1100-rtc sa1100-rtc: rtc intf: sysfs
sa1100-rtc sa1100-rtc: rtc intf: proc
sa1100-rtc sa1100-rtc: rtc intf: dev (253:0)
sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
sa1100-rtc sa1100-rtc: SA11xx/PXA2xx RTC Registered
I2C: i2c-0: PXA I2C adapter
Registered led device: spitz:amber
Registered led device: spitz:green
NET: Registered protocol family 2
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Probing IDE interface ide0...
pccard: PCMCIA card inserted into slot 1
pcmcia: registering new device pcmcia1.0
hda: HMS360606D5CF00, CFA DISK drive
mmc0: Warning - unrecognised SCR structure version 1
mmcblk0: mmc0:d3be SD01G 1006080KiB
mmcblk0: p1
ide0 at 0xc4820000-0xc4820007,0xc482000e on irq 138
hda: max request size: 128KiB
hda: 12000556 sectors (6144 MB) w/128KiB Cache, CHS=11905/16/63
hda: cache flushes supported
hda: hda1 hda2 hda3
ide-cs: hda: Vcc = 3.3, Vpp = 0.0
Probing IDE interface ide1...
hdc: LEXAR ATA FLASH, CFA DISK drive
ide1 at 0xc4840000-0xc4840007,0xc484000e on irq 137
hdc: max request size: 128KiB
hdc: 503808 sectors (257 MB) w/1KiB Cache, CHS=984/16/32
hdc: hdc1
ide-cs: hdc: Vcc = 3.3, Vpp = 0.0
sa1100-rtc sa1100-rtc: setting the system clock to 2006-09-15 13:33:59 (1158327239)
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing init memory: 196K
ASoC version 0.10rc4
WM8750: WM8750 Audio Codec 0.7
soc: WM8750 <-> pxa2xx-i2s mapping ok
soc: WM8750 <-> pxa2xx-i2s info:
soc: rate mask 0x6fe
soc: min ch 2 max ch 2
soc: min rate 8000 max rate 96000
pccard: card ejected from slot 1
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev mmcblk0.
VFS: Can't find an ext2 filesystem on dev mmcblk0.
VFS: Can't find ext3 filesystem on dev mmcblk0.
VFS: Can't find ext3 filesystem on dev mmcblk0.
VFS: Can't find an ext2 filesystem on dev mmcblk0.
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev mmcblk0.
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 23
IrCOMM protocol (Dag Brattli)
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
mice: PS/2 mouse device common for all mice
usbcore: registered new driver usbfs
usbcore: registered new driver hub
pxa27x-ohci pxa27x-ohci: PXA27x OHCI
pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1
pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
input: Touchscreen offscreen keys as /class/input/input2
pccard: PCMCIA card inserted into slot 1
pcmcia: registering new device pcmcia1.0
orinoco 0.15rc3 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
orinoco_cs 0.15rc3 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
eth0: Hardware identity 800c:0000:0001:0000
eth0: Station identity 001f:0004:0001:0003
eth0: Firmware determined as Intersil 1.3.4
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:02:DD:32:6E:B4
eth0: Station name "Prism I"
eth0: ready
eth0: index 0x01: Vcc 3.3, irq 137, io 0xc4840000-0xc484003f
ieee80211_crypt: registered algorithm 'NULL'
hostap_cs: 0.4.4-kernel (Jouni Malinen <jkmaline@cc.hut.fi>)
pcmcia: registering new device pcmcia1.1
orinoco_cs: GetNextTuple(): No matching CIS configuration. Maybe you need the ignore_cis_vcc=1 parameter.
1.1: GetFirstTuple: No more items
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0: New link status: Connected (0001)
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
eth0: New link status: Disconnected (0002)
eth0: New link status: Connected (0001)
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0: New link status: Connected (0001)
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
pccard: card ejected from slot 1
pccard: PCMCIA card inserted into slot 1
pcmcia: registering new device pcmcia1.0
Probing IDE interface ide1...
hdc: LEXAR ATA FLASH, CFA DISK drive
ide1 at 0xc4840000-0xc4840007,0xc484000e on irq 137
hdc: max request size: 128KiB
hdc: 503808 sectors (257 MB) w/1KiB Cache, CHS=984/16/32
hdc: hdc1
ide-cs: hdc: Vcc = 3.3, Vpp = 0.0
FAT: invalid media value (0x01)
VFS: Can't find a valid FAT filesystem on dev hdc.
VFS: Can't find an ext2 filesystem on dev hdc.
VFS: Can't find ext3 filesystem on dev hdc.
VFS: Can't find ext3 filesystem on dev hdc.
VFS: Can't find an ext2 filesystem on dev hdc.
FAT: invalid media value (0x01)
VFS: Can't find a valid FAT filesystem on dev hdc.