rendered paste bodyLinux version 2.6.17-gentoo-r7 (root@kagome) (gcc version 4.1.1 (Gentoo 4.1.1)) #1 SMP Tue Aug 29 01:29:23 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
128MB LOWMEM available.
On node 0 totalpages: 32768
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 28672 pages, LIFO batch:7
DMI 2.0 present.
ACPI: Unable to locate RSDP
Allocating PCI resources starting at 10000000 (gap: 08000000:f7ff0000)
Built 1 zonelists
Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz vga=791 splash=silent,theme:livecd-2006.1 CONSOLE=/dev/tty1 quiet BOOT_IMAGE=gentoo
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01109000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 391.968 MHz processor.
Using tsc for high-res timesource
Speakup v-2.00 CVS: Mon May 1 09:46:33 EDT 2006 : initialized
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 121676k/131072k available (2307k kernel code, 8844k reserved, 578k data, 224k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 785.03 BogoMIPS (lpj=3925188)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
CPU0: Intel Pentium II (Deschutes) stepping 02
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4262k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfb3c0, last bus=1
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 4000-403f claimed by PIIX4 ACPI
PCI quirk: region 5000-500f claimed by PIIX4 SMB
Boot video device is 0000:01:00.0
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: e4000000-e7ffffff
PREFETCH window: e8000000-e8ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
squashfs: version 3.0 (2006/03/15) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
Limiting direct PCI/PCI transfers.
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
vesafb: framebuffer at 0xe8000000, mapped to 0xc8880000, using 3072k, total 8192k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:7ea0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard as /class/input/input0
hda: QUANTUM FIREBALL EX3.2A, ATA DISK drive
input: PS2++ Logitech Wheel Mouse as /class/input/input1
hdb: QUANTUM FIREBALL EX3.2A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QUANTUM FIREBALL ST3.2A, ATA DISK drive
hdd: GCR-8521B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 6306048 sectors (3228 MB) w/418KiB Cache, CHS=6256/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 hda3
hdb: max request size: 128KiB
hdb: 6306048 sectors (3228 MB) w/418KiB Cache, CHS=6256/16/63, UDMA(33)
hdb: cache flushes not supported
hdb: hdb1 hdb2 hdb3
hdc: max request size: 128KiB
hdc: 6306048 sectors (3228 MB) w/81KiB Cache, CHS=6256/16/63, UDMA(33)
hdc: hdc1 hdc2 hdc3
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 224k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
PCI: Found IRQ 10 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 10, io base 0x0000e000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
libata version 1.20 loaded.
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
JFS: nTxBlock = 987, nTxLock = 7896
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset iso8859-1
Unable to load NLS charset iso8859-1
ISO 9660 Extensions: RRIP_1991A
Real Time Clock Driver v1.12ac
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 5 for device 0000:00:0d.0
eth0: RealTek RTL-8029 found at 0xe400, IRQ 5, 52:54:00:DF:66:0B.
fbsplash: console 0 using theme 'livecd-2006.1'
fbsplash: switched splash state to 'on' on console 0
md: raid0 personality registered for level 0
md: bind<hda1>
md: bind<hdb1>
md: bind<hdc1>
md1: setting max_sectors to 128, segment boundary to 32767
raid0: looking at hdc1
raid0: comparing hdc1(3055104) with hdc1(3055104)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at hdb1
raid0: comparing hdb1(3055104) with hdc1(3055104)
raid0: EQUAL
raid0: looking at hda1
raid0: comparing hda1(3055104) with hdc1(3055104)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 9165312 blocks.
raid0 : conf->hash_spacing is 9165312 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: bind<hda2>
md: bind<hdb2>
md: bind<hdc2>
md2: setting max_sectors to 128, segment boundary to 32767
raid0: looking at hdc2
raid0: comparing hdc2(31680) with hdc2(31680)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at hdb2
raid0: comparing hdb2(31680) with hdc2(31680)
raid0: EQUAL
raid0: looking at hda2
raid0: comparing hda2(31680) with hdc2(31680)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 95040 blocks.
raid0 : conf->hash_spacing is 95040 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: bind<hda3>
md: bind<hdb3>
md: bind<hdc3>
md3: setting max_sectors to 128, segment boundary to 32767
raid0: looking at hdc3
raid0: comparing hdc3(65920) with hdc3(65920)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at hdb3
raid0: comparing hdb3(65920) with hdc3(65920)
raid0: EQUAL
raid0: looking at hda3
raid0: comparing hda3(65920) with hdc3(65920)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 197760 blocks.
raid0 : conf->hash_spacing is 197760 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
Adding 197752k swap on /dev/md3. Priority:-1 extents:1 across:197752k
FDC 0 is a post-1991 82077