Someone

From c9897042a119b46a28f650620b1f4a9c55a9091e Mon Sep 17 00:00:00 2001From: Gabor Juhos <juhosg@openwrt.org>Date: Tue, 8 Dec 2009 19:56:45 +0100Subject: [PATCH] ar71xx: register rtl8366-smi device on the DIR-825 B1 board--- .../files/arch/mips/ar71xx/mach-dir-825-b1.c       |   25 ++++++++++++++++--- 1 files changed, 21 insertions(+), 4 deletions(-)diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.cindex ae95feb..4fdb9fb 100644--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c@@ -19,6 +19,7 @@ #include <linux/pci.h> #include <linux/ath9k_platform.h> #include <linux/delay.h>+#include <linux/rtl8366_smi.h>  #include <asm/mips_machine.h> #include <asm/mach-ar71xx/ar71xx.h>@@ -36,6 +37,9 @@ #define DIR825B1_GPIO_BTN_RESET			3 #define DIR825B1_GPIO_BTN_POWERSAVE		8 +#define DIR825B1_GPIO_RTL8366_SDA		5+#define DIR825B1_GPIO_RTL8366_SCK		7+ #define DIR825B1_BUTTONS_POLL_INTERVAL		20  #define DIR825B1_CAL_LOCATION_0			0x1f661000@@ -137,6 +141,19 @@ static struct gpio_button dir825b1_gpio_buttons[] __initdata = { 	} }; +static struct rtl8366_smi_platform_data dir825b1_rtl8366_smi_data = {+	.gpio_sda        = DIR825B1_GPIO_RTL8366_SDA,+	.gpio_sck        = DIR825B1_GPIO_RTL8366_SCK,+};++static struct platform_device dir825b1_rtl8366_smi_device = {+	.name		= "rtl8366-smi",+	.id		= -1,+	.dev = {+		.platform_data	= &dir825b1_rtl8366_smi_data,+	}+};+ #ifdef CONFIG_PCI static struct ar71xx_pci_irq dir825b1_pci_irqs[] __initdata = {         {@@ -267,16 +284,15 @@ static void __init dir825b1_setup(void)  	ar71xx_add_device_mdio(0x0); +	ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366_smi_device.dev; 	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;-	ar71xx_eth0_data.phy_mask = 0x1e; 	ar71xx_eth0_data.speed = SPEED_1000; 	ar71xx_eth0_data.duplex = DUPLEX_FULL; 	ar71xx_eth0_pll_data.pll_1000 = 0x11110000; +	ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366_smi_device.dev; 	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;-	ar71xx_eth1_data.phy_mask = 0xc0;-	ar71xx_eth1_data.speed = SPEED_1000;-	ar71xx_eth1_data.duplex = DUPLEX_FULL;+	ar71xx_eth1_data.phy_mask = 0x10; 	ar71xx_eth1_pll_data.pll_1000 = 0x11110000;  	ar71xx_add_device_eth(0);@@ -294,6 +310,7 @@ static void __init dir825b1_setup(void)  	ar71xx_add_device_usb(); +	platform_device_register(&dir825b1_rtl8366_smi_device); 	dir825b1_pci_init(); } -- 1.5.3.2