melissa@centaur:~$ sudo apt-get -f install
Reading package lists... Done
Building dependency tree... Done
0 upgraded, 0 newly installed, 0 to remove and 762 not upgraded.
74 not fully installed or removed.
Need to get 0B of archives.
After unpacking 0B of additional disk space will be used.
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_AU:en",
LC_ALL = (unset),
LANG = "en_AU.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_ALL to default locale: No such file or directory
Setting up libc6-i686 (2.4-1ubuntu9) ...
Setting up libgpg-error0 (1.2-1) ...
Setting up libopencdk8 (0.5.8-1) ...
Setting up libtasn1-3 (0.3.5-1) ...
Setting up libgnutls13 (1.4.0-3) ...
Setting up libpopt0 (1.10-2) ...
Setting up libssl0.9.8 (0.9.8b-2ubuntu1) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_AU:en",
LC_ALL = (unset),
LANG = "en_AU.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_ALL to default locale: No such file or directory
Setting up tzdata (2006g-2ubuntu1) ...
Current default timezone: 'Australia/Sydney'.
Local time is now: Fri Sep 15 01:56:47 EST 2006.
Universal Time is now: Thu Sep 14 15:56:47 UTC 2006.
Run 'tzconfig' if you wish to change it.
Setting up libglib2.0-0 (2.12.3-1ubuntu1) ...
Setting up libatk1.0-0 (1.12.1-0ubuntu1) ...
Setting up libfreetype6 (2.2.1-2ubuntu1) ...
Setting up libcairo2 (1.2.4-1ubuntu1) ...
Setting up libdbus-1-3 (0.92-2ubuntu2) ...
Setting up libavahi-client3 (0.6.13-2ubuntu2) ...
Setting up libavahi-glib1 (0.6.13-2ubuntu2) ...
Setting up liborbit2 (2.14.3-0ubuntu1) ...
Setting up libxml2 (2.6.26.dfsg-2ubuntu3) ...
Setting up libdbus-glib-1-2 (0.71-1ubuntu1) ...
Setting up libgnomevfs2-common (2.16.0-0ubuntu1) ...
Installing new version of config file /etc/gnome-vfs-2.0/modules/default-modules.conf ...
Setting up libgnomevfs2-0 (2.16.0-0ubuntu1) ...
Setting up libbonoboui2-common (2.16.0-0ubuntu1) ...
Setting up libcurl3 (7.15.4-1ubuntu2) ...
Setting up libdbus-1-2 (0.62-4ubuntu4) ...
Setting up libexpat1 (1.95.8-3.2) ...
Setting up libglib2.0-data (2.12.3-1ubuntu1) ...
Setting up libgnomeui-common (2.16.0-0ubuntu2) ...
Setting up libgnomevfs2-extra (2.16.0-0ubuntu1) ...
Setting up libgsf-1-common (1.14.1-2ubuntu1) ...
Setting up libgsf-1-114 (1.14.1-2ubuntu1) ...
Setting up openoffice.org-l10n-common (2.0.3-3ubuntu5) ...
Setting up openoffice.org-l10n-zh-tw (2.0.3-3ubuntu5) ...
Setting up openoffice.org-l10n-zh-cn (2.0.3-3ubuntu5) ...
Setting up openoffice.org-l10n-ru (2.0.3-3ubuntu5) ...
Setting up openoffice.org-l10n-ja (2.0.3-3ubuntu5) ...
Setting up openoffice.org-l10n-fr (2.0.3-3ubuntu5) ...
Setting up openoffice.org-l10n-en-za (2.0.3-3ubuntu5) ...
Setting up openoffice.org-l10n-en-gb (2.0.3-3ubuntu5) ...
Setting up openoffice.org-l10n-de (2.0.3-3ubuntu5) ...
Setting up openoffice.org-l10n-ar (2.0.3-3ubuntu5) ...
Setting up openoffice.org-l10n-en-us (2.0.3-4ubuntu2) ...
Setting up openoffice.org-help-de (2.0.3-3ubuntu5) ...
Setting up openoffice.org-help-fr (2.0.3-3ubuntu5) ...
Setting up openoffice.org-help-ja (2.0.3-3ubuntu5) ...
Setting up openoffice.org-help-zh-cn (2.0.3-3ubuntu5) ...
Setting up openoffice.org-help-zh-tw (2.0.3-3ubuntu5) ...
Setting up python-central (0.5.5) ...
Setting up libgtk2.0-common (2.10.3-0ubuntu1) ...
Setting up libbonobo2-common (2.16.0-0ubuntu1) ...
Setting up openoffice.org-core (2.0.3-4ubuntu2) ...
Setting up openoffice.org-common (2.0.3-4ubuntu2) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_AU:en",
LC_ALL = (unset),
LANG = "en_AU.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Updating OpenOffice.org's dictionary list... done.
***
* Updating MIME database in /usr/share/mime...
Wrote 476 strings at 20 - 2788
Wrote aliases at 2788 - 2934
Wrote parents at 2934 - 32e4
Wrote literal globs at 32e4 - 3340
Wrote suffix globs at 3340 - 6688
Wrote full globs at 6688 - 66ac
Wrote magic at 66ac - bcf8
Wrote namespace list at bcf8 - bd08
***
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_AU:en",
LC_ALL = (unset),
LANG = "en_AU.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_AU:en",
LC_ALL = (unset),
LANG = "en_AU.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Setting up openoffice.org-base (2.0.3-4ubuntu2) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_AU:en",
LC_ALL = (unset),
LANG = "en_AU.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Setting up openoffice.org-calc (2.0.3-4ubuntu2) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_AU:en",
LC_ALL = (unset),
LANG = "en_AU.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Setting up openoffice.org-draw (2.0.3-4ubuntu2) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_AU:en",
LC_ALL = (unset),
LANG = "en_AU.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Setting up openoffice.org-impress (2.0.3-4ubuntu2) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_AU:en",
LC_ALL = (unset),
LANG = "en_AU.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Setting up openoffice.org-math (2.0.3-4ubuntu2) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_AU:en",
LC_ALL = (unset),
LANG = "en_AU.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Setting up openoffice.org-writer (2.0.3-4ubuntu2) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_AU:en",
LC_ALL = (unset),
LANG = "en_AU.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Setting up belocs-locales-bin (2.4-1ubuntu3) ...
Installing new version of config file /etc/belocs/locale-gen.conf ...
Setting up locales (2.3.20) ...
Installing new version of config file /etc/belocs/iso-639.def ...
Generating locales...
ar_AE.UTF-8... done
ar_BH.UTF-8... done
ar_DZ.UTF-8... done
ar_EG.UTF-8... done
ar_IN.UTF-8... done
ar_IQ.UTF-8... done
ar_JO.UTF-8... done
ar_KW.UTF-8... done
ar_LB.UTF-8... done
ar_LY.UTF-8... done
ar_MA.UTF-8... done
ar_OM.UTF-8... done
ar_QA.UTF-8... done
ar_SA.UTF-8... done
ar_SD.UTF-8... done
ar_SY.UTF-8... done
ar_TN.UTF-8... done
ar_YE.UTF-8... done
de_AT.UTF-8... done
de_BE.UTF-8... done
de_CH.UTF-8... done
de_DE.UTF-8... done
de_LU.UTF-8... done
en_AU.UTF-8... done
en_BW.UTF-8... done
en_CA.UTF-8... done
en_DK.UTF-8... done
en_GB.UTF-8... done
en_HK.UTF-8... done
en_IE.UTF-8... done
en_IN.UTF-8... done
en_NZ.UTF-8... done
en_PH.UTF-8... done
en_SG.UTF-8... done
en_US.UTF-8... done
en_ZA.UTF-8... done
en_ZW.UTF-8... done
fr_BE.UTF-8... done
fr_CA.UTF-8... done
fr_CH.UTF-8... done
fr_FR.UTF-8... done
fr_LU.UTF-8... done
ja_JP.UTF-8... done
ru_RU.UTF-8... done
ru_UA.UTF-8... done
zh_CN.UTF-8... done
zh_HK.UTF-8... done
zh_SG.UTF-8... done
zh_TW.UTF-8... done
Generation complete.
Setting up libpango1.0-0 (1.14.3-0ubuntu1) ...
Setting up libgtk2.0-0 (2.10.3-0ubuntu1) ...
Setting up gtk2-engines (2.7.8-0ubuntu1) ...
Setting up gnome-accessibility-themes (2.16.0-0ubuntu1) ...
Setting up gnome-keyring (0.6.0-0ubuntu1) ...
Setting up gnome-themes (2.16.0-0ubuntu1) ...
Setting up libbonobo2-0 (2.16.0-0ubuntu1) ...
Setting up libbonoboui2-0 (2.16.0-0ubuntu1) ...
Setting up libgnome-keyring0 (0.6.0-0ubuntu1) ...
Setting up libgnomeui-0 (2.16.0-0ubuntu2) ...
Setting up librsvg2-2 (2.16.0-0ubuntu1) ...
Setting up openoffice.org-gtk (2.0.3-4ubuntu2) ...
Setting up openoffice.org-gnome (2.0.3-4ubuntu2) ...
Setting up libpango1.0-common (1.14.3-0ubuntu1) ...
Updating the modules list for Pango-1.5.0...done.
Cleaning up font configuration of pango...
Cleaning up category xfont..
Updating font configuration of pango...
Cleaning up category xfont..
Updating category xfont..
Setting up libgtk2.0-bin (2.10.3-0ubuntu1) ...
Updating the IM modules list for GTK+-2.10.0...done.
Updating the gdk-pixbuf loaders list for GTK+-2.10.0...done.
Setting up librsvg2-common (2.16.0-0ubuntu1) ...
Updating the gdk-pixbuf loaders list for GTK+-2.10.0...done.
melissa@centaur:~$