rendered paste body> cat /etc/wanpipe/wanpipe1.conf
#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Fri Sep 8 15:06:17 CDT 2006
#
# Note: This file was generated automatically
# by /usr/sbin/wancfg program.
#
# If you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe1 = WAN_AFT, Comment
[interfaces]
wag1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 8
PCIBUS = 1
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 0DB
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
[wag1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = NO
> wanrouter status
Password:
Devices currently active:
wanpipe1
Wanpipe Config:
Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate |
wanpipe1 | N/A | A101/2 | 20 | 8 | 1 | EXT | 0 |
Wanrouter Status:
Device name | Protocol | Station | Status |
wanpipe1 | AFT HDLC | N/A | Connected |
> ifconfig wag1
wag1: flags=51<UP,POINTOPOINT,RUNNING> mtu 192
>