rendered paste bodyLinux version 2.6.17-suspend2 (root@myhost) (gcc version 4.1.1) #1 SMP PREEMPT Wed Sep 13 13:03:23 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffdb000 (usable)
BIOS-e820: 000000000ffdb000 - 0000000010000000 (reserved)
BIOS-e820: 00000000100a0000 - 0000000010100000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65499
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 61403 pages, LIFO batch:15
DMI 2.3 present.
ACPI: RSDP (v000 DELL ) @ 0x000f4040
ACPI: RSDT (v001 DELL CPi R 0x27d2051c ASL 0x00000061) @ 0x0fff0000
ACPI: FADT (v001 DELL CPi R 0x27d2051c ASL 0x00000061) @ 0x0fff0400
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 20000000 (gap: 10100000:efd00000)
Built 1 zonelists
Kernel command line: root=/dev/mapper/gollum-root resume2=file:/dev/mapper/root:0xc1008 ro vga=0x318
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0120a000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 463.413 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 253800k/261996k available (2284k kernel code, 7624k reserved, 724k data, 232k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 927.28 BogoMIPS (lpj=463641)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
checking if image is initramfs... it is
Freeing initrd memory: 1718k freed
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0820)
CPU0: Intel Celeron (Mendocino) stepping 0a
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc0ae, last bus=1
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 0800-083f claimed by PIIX4 ACPI
PCI quirk: region 0840-084f claimed by PIIX4 SMB
PIIX4 devres B PIO at 00e0-00e7
PIIX4 devres C PIO at 0850-085f
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: Power Resource [PADA] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:02: ioport range 0x800-0x805 could not be reserved
pnp: 00:02: ioport range 0x808-0x80f could not be reserved
pnp: 00:03: ioport range 0x806-0x807 has been reserved
pnp: 00:03: ioport range 0x850-0x853 has been reserved
pnp: 00:03: ioport range 0x856-0x85f has been reserved
pnp: 00:03: ioport range 0x810-0x83f has been reserved
pnp: 00:03: ioport range 0x840-0x84f has been reserved
pnp: 00:03: ioport range 0x600-0x67f has been reserved
pnp: 00:03: ioport range 0x680-0x6ff has been reserved
pnp: 00:04: ioport range 0xf000-0xf0fe has been reserved
pnp: 00:04: ioport range 0xf100-0xf1fe has been reserved
pnp: 00:04: ioport range 0xf200-0xf2fe has been reserved
pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:04: ioport range 0xf500-0xf5fe has been reserved
pnp: 00:04: ioport range 0xf600-0xf6fe has been reserved
pnp: 00:04: ioport range 0xf800-0xf8fe has been reserved
pnp: 00:04: ioport range 0xf900-0xf9fe has been reserved
pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: e000-efff
MEM window: fc000000-feffffff
PREFETCH window: 28000000-280fffff
PCI: Bus 2, cardbus bridge: 0000:00:03.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 20000000-21ffffff
MEM window: 22000000-23ffffff
PCI: Bus 6, cardbus bridge: 0000:00:03.1
IO window: 00001800-000018ff
IO window: 00001c00-00001cff
PREFETCH window: 24000000-25ffffff
MEM window: 26000000-27ffffff
PCI: Enabling device 0000:00:03.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Enabling device 0000:00:03.1 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 4096 (order: 3, 49152 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
vesafb: framebuffer at 0xfd000000, mapped to 0xd0880000, using 4608k, total 8128k
vesafb: mode is 1024x768x24, linelength=3072, pages=2
vesafb: protected mode interface info at c000:5044
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
ACPI: Sleep Button (CM) [SBTN]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THM] (55 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI wakeup devices:
LID PBTN PCI0 UAR1 MPCI
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 232k freed
input: DualPoint Stick as /class/input/input1
input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input2
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0860-0x0867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x0868-0x086f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
hda: FUJITSU MHV2080AT, ATA DISK drive
usb 1-1.3: new low speed USB device using uhci_hcd and address 3
usb 1-1.3: configuration #1 chosen from 1 choice
usb 1-1.4: new low speed USB device using uhci_hcd and address 4
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
usb 1-1.4: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: HID 062a:0001 as /class/input/input3
input: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:07.2-1.3
input: IBM IBM Standard USB Keyboard as /class/input/input4
input: USB HID v1.00 Keyboard [IBM IBM Standard USB Keyboard] on usb-0000:00:07.2-1.4
input: IBM IBM Standard USB Keyboard as /class/input/input5
input: USB HID v1.00 Mouse [IBM IBM Standard USB Keyboard] on usb-0000:00:07.2-1.4
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
Suspend2 2.2.7.5: Can't translate "file" into a device id yet.
Suspend2 Filewriter: Testing whether you can resume:
Suspend2 2.2.7.5: Filewriter: File signature found.
Resuming enabled.
Suspend2 2.2.7.5: Resuming enabled.
Suspend2 2.2.7.5: No image found.
Suspend2 2.2.7.5: Read image returned -61.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.6)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu
Non-volatile memory driver v1.2
Real Time Clock Driver v1.12ac
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf4000000
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:03.0 [1028:00aa]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:03.0, mfunc 0x01261222, devctl 0x66
input: PC Speaker as /class/input/input6
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:03.1 [1028:00aa]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:03.1, mfunc 0x01261222, devctl 0x66
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000020
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
pccard: CardBus card inserted into slot 1
es1968: clocking to 48000
Linux video capture interface: v1.00
cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x377
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x377
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com
PCI: Setting latency timer of device 0000:06:00.0 to 64
rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
rt2500 EEPROM: 1 1 1 1 1 1 1 1 1 1 1 1 1 1 dBm Maximum
ts: Compaq touchscreen protocol output
EXT3 FS on dm-3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 261620k swap on /dev/mapper/swap. Priority:-1 extents:1 across:261620k
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
Suspend2 2.2.7.5: Filewriter: Testing whether you can suspend:
Suspend2 2.2.7.5: Filewriter: File signature found.
Suspend2 2.2.7.5: Can't translate "file" into a device id yet.
Suspend2 2.2.7.5: Resuming enabled.
Suspend2 2.2.7.5: Suspending enabled.
pccard: card ejected from slot 1
Suspend2 2.2.7.5: Initiating a software suspend cycle.
Freezing cpus ...
Free:32190(32190). Sets:6172(6172),27053(27053). Header:4. Nosave:2-0=2. Storage:0/16866(65536). Needed:-27808|-48670|0.
Free:32190(32190). Sets:6172(6172),27053(27053). Header:4. Nosave:2-0=2. Storage:0/16866(65536). Needed:-27808|-48670|0.
Free:32206(32206). Sets:6155(6155),27053(27053). Header:4. Nosave:2-0=2. Storage:65536/16858(65536). Needed:-27824|-48678|0.
20%...40%...60%...80%...100%...done.
pnp: Device 00:0d disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
EXT3-fs error (device dm-3): ext3_readdir: bad entry in directory #629262: rec_len is smaller than minimal - offset=0, inode=0, rec_len=0, name_len=0
Aborting journal on device dm-3.
------------[ cut here ]------------
kernel BUG at block/ll_rw_blk.c:3128!
invalid opcode: 0000 [#1]
PREEMPT SMP
Modules linked in: ext2 rfcomm hidp l2cap bluetooth snd_seq_oss snd_seq_midi_event snd_seq tsdev snd_pcm_oss snd_mixer_oss shpchp pci_hotplug pcmcia radio_maestro compat_ioctl32 videodev snd_es1968 gameport snd_ac97_codec snd_ac97_bus joydev ppp_generic slhc snd_pcm snd_timer snd_page_alloc evdev snd_mpu401_uart snd_rawmidi pcspkr yenta_socket rsrc_nonstatic pcmcia_core snd_seq_device intel_agp agpgart i2c_piix4 i2c_core snd soundcore rtc nvram coda tun fuse ext3 jbd mbcache aes_i586 dm_crypt dm_mod ide_disk usbhid piix generic ide_core uhci_hcd usbcore
CPU: 0
EIP: 0060:[<c021a83d>] Not tainted VLI
EFLAGS: 00010246 (2.6.17-suspend2 #1)
EIP is at submit_bio+0x7d/0x100
eax: 00000005 ebx: cfa39301 ecx: 00000000 edx: 00000008
esi: ce887d40 edi: ce887d40 ebp: 00000000 esp: cf785d38
ds: 007b es: 007b ss: 0068
Process nfsd4 (pid: 2490, threadinfo=cf784000 task=cf657090)
Stack: ffffffff ffffffff fffffffe c035573b cf6aa860 00000000 ce887d40 c03f0340
00000000 c0179fa1 0000000c cffaa920 00000010 cfa393ac cf883000 cfa393ac
ce887d40 00004800 c01763cb 00000001 cfa393ac cf883000 cfef1814 00000001
Call Trace:
<c0179fa1> bio_alloc_bioset+0x91/0x150 <c01763cb> submit_bh+0xeb/0x150
<c01781bf> sync_dirty_buffer+0x3f/0xd0 <c015b92e> __set_page_dirty_nobuffers+0xae/0x100
<d0d36bed> journal_update_superblock+0xbd/0xd0 [jbd] <d0d70cf6> ext3_handle_error+0x56/0xb0 [ext3]
<c01246cb> printk+0x1b/0x20 <d0d70e15> ext3_error+0x55/0x60 [ext3]
<d0d65ef4> ext3_check_dir_entry+0x74/0x110 [ext3] <d0d66630> ext3_readdir+0x3e0/0x610 [ext3]
<c01f84c0> nfsd4_build_dentrylist+0x0/0x80 <c011bee9> __wake_up_common+0x39/0x70
<c0339697> __mutex_lock_slowpath+0x1f7/0x4b0 <c0188153> vfs_readdir+0x73/0xb0
<c01f84c0> nfsd4_build_dentrylist+0x0/0x80 <c0188174> vfs_readdir+0x94/0xb0
<c01f83b2> nfsd4_list_rec_dir+0x92/0x160 <c01f8640> purge_old+0x0/0x60
<c01f85bf> nfsd4_recdir_purge_old+0x1f/0x50 <c01f2838> laundromat_main+0x48/0x250
<c013438b> run_workqueue+0x7b/0xf0 <c01f27f0> laundromat_main+0x0/0x250
<c0134f57> worker_thread+0x107/0x130 <c011d1e0> default_wake_function+0x0/0x10
<c0134e50> worker_thread+0x0/0x130 <c0137ccc> kthread+0xac/0xe0
<c0137c20> kthread+0x0/0xe0 <c0101005> kernel_thread_helper+0x5/0x10
Code: 74 06 f6 47 11 01 74 23 89 f8 e8 df db ff ff 8b 5c 24 3c 8b 74 24 40 8b 7c 24 44 83 c4 48 c3 b8 18 00 00 00 e8 f5 09 f4 ff eb c5 <0f> 0b 38 0c 28 6d 36 c0 eb d3 8b 47 0c 8d 54 24 1c e8 9d 82 f9
EIP: [<c021a83d>] submit_bio+0x7d/0x100 SS:ESP 0068:cf785d38
BUG: nfsd4/2490, lock held at task exit time!
[c03a06e0] {client_mutex}
.. held by: nfsd4: 2490 [cf657090, 110]
... acquired at: laundromat_main+0x1d/0x250
PM: Writing back config space on device 0000:00:00.0 at offset 1 (was 22100106, writing a2100106)
PM: Writing back config space on device 0000:00:03.0 at offset f (was 74001ff, writing 5c001ff)
PM: Writing back config space on device 0000:00:03.0 at offset 3 (was 822008, writing 82a820)
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PM: Writing back config space on device 0000:00:03.1 at offset f (was 74001ff, writing 54001ff)
PM: Writing back config space on device 0000:00:03.1 at offset 3 (was 822008, writing 82a820)
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
pccard: CardBus card inserted into slot 1
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PM: Writing back config space on device 0000:00:08.0 at offset 1 (was 2900005, writing 2900001)
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
pnp: Device 00:05 does not support activation.
pnp: Device 00:06 does not support activation.
pnp: Device 00:0d activated.
20%...40%...60%...80%...100%...done.
Suspend2 debugging info:
- SUSPEND core : 2.2.7.5
- Kernel Version : 2.6.17-suspend2
- Compiler vers. : 4.1
- Attempt number : 1
- Parameters : 0 16401 0 1 0 0
- Overall expected compression percentage: 50.
- Compressor is 'lzf'.
Compressed 135909376 bytes into 74813592 (44 percent compression).
- Swapwriter inactive.
- Filewriter active.
Storage available for image: 65536 pages.
- I/O speed: Write 8 MB/s, Read 12 MB/s.
- Extra pages : -27 used/500.
ext3_abort called.
EXT3-fs error (device dm-3): ext3_journal_start_sb: Detected aborted journal
Remounting filesystem read-only
Thawing cpus ...
Open file /root/suspend_file returned ffffffe2.
PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com
PCI: Setting latency timer of device 0000:06:00.0 to 64
rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
rt2500 EEPROM: 1 1 1 1 1 1 1 1 1 1 1 1 1 1 dBm Maximum
ip_tables: (C) 2000-2006 Netfilter Core Team