rendered paste bodykexecboot 0.5 starting
I'm the init-process!
Unknown keyword: 'LOGLEVEL'
Can't parse keyword loglevel!
Start: 60004, End: 24
Offset: 64c004
Total MTD size: 8000000
SMF: 700000
Root: 6100000
Root[2]: 6100000
Home: 1800000
FB angle is 0, tty is /dev/tty1
Got device '/dev/mtdblock0' (31, 0) of size 6Mb
Probing /dev/mtdblock0
FS could not be identified
Can't detect FS type
Got device '/dev/mtdblock1' (31, 1) of size 7Mb
Probing /dev/mtdblock1
FS could not be identified
Can't detect FS type
Got device '/dev/mtdblock2' (31, 2) of size 53Mb
Probing /dev/mtdblock2
FS could not be identified
Can't detect FS type
Got device '/dev/mtdblock3' (31, 3) of size 68Mb
Probing /dev/mtdblock3
FS could not be identified
Can't detect FS type
Got device '/dev/mmcblk0' (179, 0) of size 489Mb
Probing /dev/mmcblk0
FS could not be identified
Can't detect FS type
Got device '/dev/mmcblk0p1' (179, 1) of size 486Mb
Probing /dev/mmcblk0p1
+ FS on device is ext2
Can't read next device line
Found 1 items
+ processing 0: angstrom
* maximum priority 0 found at 0
+ [angstrom
/dev/mmcblk0p1 ext2 486Mb]
+ found evdev: event5
Can't open evdev device '/dev/event5'+ found evdev: event0
Supported event types:
Event type 0x00 (Unknown event type: 0x0000)
Event type 0x01 (Keys or Buttons)
Event type 0x05 (Switch)
Event type 0x14 (Repeat)
Event type 0x16 (Power)
+ found evdev: event2
Can't open evdev device '/dev/event2'+ found evdev: event6
Can't open evdev device '/dev/event6'+ found evdev: event7
Can't open evdev device '/dev/event7'+ found evdev: event1
Supported event types:
Event type 0x00 (Unknown event type: 0x0000)
Event type 0x01 (Keys or Buttons)
Event type 0x03 (Absolute Axes)
+ found evdev: event4
Can't open evdev device '/dev/event4'+ found evdev: event3
Can't open evdev device '/dev/event3'+ opened event device '/dev/event0', fd: 7
+ opened event device '/dev/event1', fd: 8
load_argv: /usr/sbin/kexec, -l, --command-line=root=/dev/mmcblk0p1 rootfstype=ext2 rootwait console=ttyS0,115200n8 console=tty1 noinitrd debug, /mnt/boot/uImage
No network is detected, disabling ifdown()
exec_argv: /usr/sbin/kexec, -eUncompressing Linux....................................................................................... done, booting the kernel.
Linux version 2.6.26 (andrea@mizar) (gcc version 4.3.3 (GCC) ) #1 PREEMPT Sat Nov 21 14:15:30 CET 2009
CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), cr=0000397f
Machine: SHARP Husky
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
DMA zone: 128 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 16256 pages, LIFO batch:3
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 398.13MHz (*2.0, active)
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: root=/dev/mmcblk0p1 rootfstype=ext2 rootwait console=ttyS0,115200n8 console=tty1 noinitrd debug
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
console [tty1] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 62092KB available (2496K code, 189K data, 84K init)
Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 624 bytes
NET: Registered protocol family 16
Sharp Scoop Device found at 0x10800000 -> 0xc4806000
Switched to high resolution mode on CPU 0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
PXA CPU frequency change support initialized
JFFS2 version 2.2. (NAND) (SUMMARY) 2001-2006 Red Hat, Inc.
msgmni has been set to 121
io scheduler noop registered
io scheduler anticipatory registered (default)
Corgi Backlight Driver Initialized.
Found w100 at 0x08000000.
Console: switching to colour frame buffer device 80x30
fb0: w100fb frame buffer device
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
console [ttyS0] enabled
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 7) is a HWUART
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Sharp SL series flash device: 800000 at 0
Using static partition definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00120000-0x007f0000 : "Boot PROM Filesystem"
NAND device: Manufacturer ID: 0xec, Chip ID: 0x79 (Samsung NAND 128MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 32 at 0x00080000
Bad eraseblock 1440 at 0x01680000
Creating 3 MTD partitions on "sharpsl-nand":
0x00000000-0x00700000 : "System Area"
0x00700000-0x03c00000 : "Root Filesystem"
0x03c00000-0x08000000 : "Home Filesystem"
pxa2xx_udc: version 30-June-2007
input: Corgi Keyboard as /devices/platform/corgi-keyboard/input/input0
sharpsl_rc_init
input: Corgi Touchscreen as /devices/platform/sharp-scoop/corgi-ssp/corgi-ts/input/input1
sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
I2C: i2c-0: PXA I2C adapter
Registered led device: corgi:amber:charge
Registered led device: corgi:green:mail
TCP cubic registered
XScale DSP coprocessor detected.
sa1100-rtc sa1100-rtc: setting system clock to 1970-01-01 00:00:13 UTC (13)
Waiting for root device /dev/mmcblk0p1...
mmc0: new SD card at address b368
mmcblk0: mmc0:b368 SMI 501248KiB
mmcblk0: p1
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 84K
NET: Registered protocol family 23
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
IrCOMM protocol (Dag Brattli)
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
ASoC version 0.13.2
wm8731: WM8731 Audio Codec 0.13
asoc: WM8731 <-> pxa2xx-i2s mapping ok