rendered paste body[ 0.000000] Linux version 2.6.30-zen10 (root@raiion) (gcc version 4.3.3 20090501 (stable) (Momonga Linux 6 4.3.3-10m.mo6) ) #3 ZEN SMP PREEMPT Tue Nov 17 15:17:32 CST 2009
[ 0.000000] Command line: rw root=/dev/mapper/vg_raiion-lv_root vga=318 rhgb quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffae000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcffa0 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0E0000000 mask 0E0000000 uncachable
[ 0.000000] 1 base 000000000 mask 000000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cffa0000 (usable)
[ 0.000000] modified: 00000000cffa0000 - 00000000cffae000 (ACPI data)
[ 0.000000] modified: 00000000cffae000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] modified: 00000000cfff0000 - 00000000e0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cffa0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cffa0000 page 4k
[ 0.000000] kernel direct mapping tables up to cffa0000 @ 10000-16000
[ 0.000000] RAMDISK: 37d33000 - 37fef8c8
[ 0.000000] ACPI: RSDP 00000000000fa810 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cffa0000 00040 (v01 050809 RSDT1106 20090508 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffa0200 00084 (v01 050809 FACP1106 20090508 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cffa04a0 070E9 (v01 A108P A108PD08 00000D08 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cffae000 00040
[ 0.000000] ACPI: APIC 00000000cffa0390 00080 (v01 050809 APIC1106 20090508 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffa0410 0003C (v01 050809 OEMMCFG 20090508 MSFT 00000097)
[ 0.000000] ACPI: WDRT 00000000cffa0450 00047 (v01 050809 NV-WDRT 20090508 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffae040 00079 (v01 050809 OEMB1106 20090508 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cffaa4a0 00038 (v01 050809 OEMHPET0 20090508 MSFT 00000097)
[ 0.000000] ACPI: NVHD 00000000cffae0c0 00284 (v01 050809 NVHDCP 20090508 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00cffa0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000b324c8] TEXT DATA BSS ==> [0000200000 - 0000b324c8]
[ 0.000000] #3 [0037d33000 - 0037fef8c8] RAMDISK ==> [0037d33000 - 0037fef8c8]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0000b33000 - 0000b331d3] BRK ==> [0000b33000 - 0000b331d3]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff880001200000-ffff880003ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cffa0
[ 0.000000] On node 0 totalpages: 851759
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2457 pages reserved
[ 0.000000] DMA zone: 1470 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11591 pages used for memmap
[ 0.000000] DMA32 zone: 836185 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages at ffff88000101c000, static data 67616 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 837655
[ 0.000000] Kernel command line: rw root=/dev/mapper/vg_raiion-lv_root vga=318 rhgb quiet
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1599.906 MHz processor.
[ 0.000999] spurious 8259A interrupt: IRQ7.
[ 0.000999] Console: colour dummy device 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000999] Checking aperture...
[ 0.000999] No AGP bridge found
[ 0.000999] Memory: 3340356k/3407488k available (5109k kernel code, 452k absent, 66060k reserved, 2843k data, 544k init)
[ 0.000999] hpet clockevent registered
[ 0.000999] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.81 BogoMIPS (lpj=1599906)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] SELinux: Starting in permissive mode
[ 0.000999] Mount-cache hash table entries: 256
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.000999] CPU: L2 cache: 512K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 0
[ 0.000999] CPU0: Thermal monitoring enabled (TM1)
[ 0.000999] using mwait in idle threads.
[ 0.000999] ACPI: Core revision 20090320
[ 0.022107] Setting APIC routing to flat
[ 0.022544] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.032621] CPU0: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
[ 0.032999] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.032999] Initializing CPU#1
[ 0.032999] Calibrating delay using timer specific routine.. 3199.56 BogoMIPS (lpj=1599782)
[ 0.032999] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.032999] CPU: L2 cache: 512K
[ 0.032999] CPU: Physical Processor ID: 0
[ 0.032999] CPU: Processor Core ID: 1
[ 0.032999] CPU1: Thermal monitoring enabled (TM1)
[ 0.032999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.104953] CPU1: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
[ 0.104999] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.104999] Measured 36 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.104999] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.105179] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.105179] Initializing CPU#2
[ 0.105179] Calibrating delay using timer specific routine.. 3199.56 BogoMIPS (lpj=1599781)
[ 0.105179] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.105179] CPU: L2 cache: 512K
[ 0.105179] CPU: Physical Processor ID: 0
[ 0.105179] CPU: Processor Core ID: 0
[ 0.105179] CPU2: Thermal monitoring enabled (TM1)
[ 0.105179] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.177291] CPU2: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
[ 0.177475] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.177458] Initializing CPU#3
[ 0.177458] Calibrating delay using timer specific routine.. 3199.58 BogoMIPS (lpj=1599790)
[ 0.177458] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.177458] CPU: L2 cache: 512K
[ 0.177458] CPU: Physical Processor ID: 0
[ 0.177458] CPU: Processor Core ID: 1
[ 0.177458] CPU3: Thermal monitoring enabled (TM1)
[ 0.177458] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.251640] CPU3: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
[ 0.251678] Brought up 4 CPUs
[ 0.251686] Total of 4 processors activated (12798.51 BogoMIPS).
[ 0.252734] khelper used greatest stack depth: 6336 bytes left
[ 0.252917] net_namespace: 1848 bytes
[ 0.253704] Time: 20:44:51 Date: 11/17/09
[ 0.253704] NET: Registered protocol family 16
[ 0.255212] ACPI: bus type pci registered
[ 0.255644] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
[ 0.255651] PCI: Not using MMCONFIG.
[ 0.255657] PCI: Using configuration type 1 for base access
[ 0.256543] khelper used greatest stack depth: 6312 bytes left
[ 0.275947] bio: create slab <bio-0> at 0
[ 0.280522] ACPI: EC: Look up EC in DSDT
[ 0.325540] ACPI: Interpreter enabled
[ 0.325551] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.325621] ACPI: Using IOAPIC for interrupt routing
[ 0.325807] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
[ 0.348314] PCI: MCFG area at fc000000 reserved in ACPI motherboard resources
[ 0.349619] PCI: Using MMCONFIG at fc000000 - fdffffff
[ 0.407035] ACPI: No dock devices found.
[ 0.408196] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.408403] pci 0000:00:03.0: reg 10 io port: [0x4f00-0x4fff]
[ 0.408554] pci 0000:00:03.2: reg 10 io port: [0x4900-0x493f]
[ 0.408578] pci 0000:00:03.2: reg 20 io port: [0x4d00-0x4d3f]
[ 0.408589] pci 0000:00:03.2: reg 24 io port: [0x4e00-0x4e3f]
[ 0.408624] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.408634] pci 0000:00:03.2: PME# disabled
[ 0.408803] pci 0000:00:03.5: reg 10 32bit mmio: [0xfae80000-0xfaefffff]
[ 0.408923] pci 0000:00:04.0: reg 10 32bit mmio: [0xfae7f000-0xfae7ffff]
[ 0.408971] pci 0000:00:04.0: supports D1 D2
[ 0.408977] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.408986] pci 0000:00:04.0: PME# disabled
[ 0.409044] pci 0000:00:04.1: reg 10 32bit mmio: [0xfae7ec00-0xfae7ecff]
[ 0.409100] pci 0000:00:04.1: supports D1 D2
[ 0.409106] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.409114] pci 0000:00:04.1: PME# disabled
[ 0.409171] pci 0000:00:06.0: reg 10 32bit mmio: [0xfae7d000-0xfae7dfff]
[ 0.409218] pci 0000:00:06.0: supports D1 D2
[ 0.409224] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.409233] pci 0000:00:06.0: PME# disabled
[ 0.409294] pci 0000:00:06.1: reg 10 32bit mmio: [0xfae7e800-0xfae7e8ff]
[ 0.409350] pci 0000:00:06.1: supports D1 D2
[ 0.409356] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.409364] pci 0000:00:06.1: PME# disabled
[ 0.409421] pci 0000:00:08.0: reg 10 32bit mmio: [0xfae78000-0xfae7bfff]
[ 0.409469] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.409477] pci 0000:00:08.0: PME# disabled
[ 0.409573] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfae7c000-0xfae7cfff]
[ 0.409584] pci 0000:00:0a.0: reg 14 io port: [0xd080-0xd087]
[ 0.409595] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfae7e400-0xfae7e4ff]
[ 0.409606] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfae7e000-0xfae7e00f]
[ 0.409642] pci 0000:00:0a.0: supports D1 D2
[ 0.409648] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.409657] pci 0000:00:0a.0: PME# disabled
[ 0.409714] pci 0000:00:0b.0: reg 10 io port: [0xd000-0xd007]
[ 0.409725] pci 0000:00:0b.0: reg 14 io port: [0xcc00-0xcc03]
[ 0.409736] pci 0000:00:0b.0: reg 18 io port: [0xc880-0xc887]
[ 0.409746] pci 0000:00:0b.0: reg 1c io port: [0xc800-0xc803]
[ 0.409757] pci 0000:00:0b.0: reg 20 io port: [0xc480-0xc48f]
[ 0.409768] pci 0000:00:0b.0: reg 24 32bit mmio: [0xfae76000-0xfae77fff]
[ 0.410039] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.410052] pci 0000:00:0c.0: PME# disabled
[ 0.410162] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.410170] pci 0000:00:10.0: PME# disabled
[ 0.410404] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.410417] pci 0000:00:15.0: PME# disabled
[ 0.410674] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.410688] pci 0000:00:16.0: PME# disabled
[ 0.410945] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.410958] pci 0000:00:17.0: PME# disabled
[ 0.411216] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.411229] pci 0000:00:18.0: PME# disabled
[ 0.411350] pci 0000:00:09.0: transparent bridge
[ 0.411520] pci 0000:03:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[ 0.411537] pci 0000:03:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
[ 0.411553] pci 0000:03:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.411565] pci 0000:03:00.0: reg 24 io port: [0xec00-0xec7f]
[ 0.411577] pci 0000:03:00.0: reg 30 32bit mmio: [0xfafe0000-0xfaffffff]
[ 0.411663] pci 0000:00:10.0: bridge io port: [0xe000-0xefff]
[ 0.411671] pci 0000:00:10.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff]
[ 0.411683] pci 0000:00:10.0: bridge 64bit mmio pref: [0xe0000000-0xf9ffffff]
[ 0.411862] pci 0000:04:00.0: reg 10 64bit mmio: [0xfebfe000-0xfebfffff]
[ 0.412032] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.412066] pci 0000:04:00.0: PME# disabled
[ 0.414276] pci 0000:00:15.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.414702] pci_bus 0000:00: on NUMA node 0
[ 0.414728] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.415256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT]
[ 0.415496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.415687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[ 0.415937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.416173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.416397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.416623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.473499] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.474393] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.475258] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.476123] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.476978] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled.
[ 0.477844] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[ 0.478705] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.479568] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.480432] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 0.481295] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.482158] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.483022] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.483876] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[ 0.484736] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.485600] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.486467] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.487344] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *10
[ 0.488207] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.489071] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.489927] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.490790] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
[ 0.491656] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.492521] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.493388] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.494256] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.495121] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.495978] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.496842] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.497706] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.498572] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.499443] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.500317] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.501194] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *9
[ 0.502069] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
[ 0.502933] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
[ 0.503804] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9
[ 0.504674] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *7
[ 0.505549] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.506423] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[ 0.507301] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.508305] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.509181] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
[ 0.510058] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
[ 0.510925] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
[ 0.511787] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[ 0.512656] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[ 0.513533] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
[ 0.514410] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
[ 0.515289] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *15
[ 0.516163] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *14
[ 0.516904] SCSI subsystem initialized
[ 0.517448] libata version 3.00 loaded.
[ 0.518250] usbcore: registered new interface driver usbfs
[ 0.518387] usbcore: registered new interface driver hub
[ 0.518542] usbcore: registered new device driver usb
[ 0.519011] PCI: Using ACPI for IRQ routing
[ 0.537150] cfg80211: Using static regulatory domain info
[ 0.537157] cfg80211: Regulatory domain: US
[ 0.537162] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.537170] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.537177] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.537184] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.537192] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.537199] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.537206] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.537223] cfg80211: Calling CRDA for country: US
[ 0.537093] NetLabel: Initializing
[ 0.537099] NetLabel: domain hash size = 128
[ 0.537104] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.537144] NetLabel: unlabeled traffic allowed by default
[ 0.537572] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.537589] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.541020] Switched to high resolution mode on CPU 0
[ 0.541087] Switched to high resolution mode on CPU 1
[ 0.541325] Switched to high resolution mode on CPU 2
[ 0.541883] Switched to high resolution mode on CPU 3
[ 0.547182] pnp: PnP ACPI init
[ 0.547210] ACPI: bus type pnp registered
[ 0.570176] pnp: PnP ACPI: found 11 devices
[ 0.570184] ACPI: ACPI bus type pnp unregistered
[ 0.570221] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.570230] system 00:04: ioport range 0x800-0x80f has been reserved
[ 0.570239] system 00:04: ioport range 0x4000-0x407f has been reserved
[ 0.570248] system 00:04: ioport range 0x4080-0x40ff has been reserved
[ 0.570270] system 00:04: ioport range 0x4400-0x447f has been reserved
[ 0.570279] system 00:04: ioport range 0x4480-0x44ff has been reserved
[ 0.570287] system 00:04: ioport range 0x4800-0x487f has been reserved
[ 0.570296] system 00:04: ioport range 0x4880-0x48ff has been reserved
[ 0.570308] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been reserved
[ 0.570317] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 0.570326] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.570348] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.570357] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.570379] system 00:08: ioport range 0xa00-0xa0f has been reserved
[ 0.570388] system 00:08: ioport range 0xa10-0xa1f has been reserved
[ 0.570405] system 00:09: iomem range 0xfc000000-0xfdffffff has been reserved
[ 0.570423] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.570431] system 00:0a: iomem range 0xc0000-0xcffff has been reserved
[ 0.570440] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[ 0.570449] system 00:0a: iomem range 0x100000-0xdfffffff could not be reserved
[ 0.570458] system 00:0a: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.575651] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.575658] pci 0000:00:09.0: IO window: disabled
[ 0.575667] pci 0000:00:09.0: MEM window: disabled
[ 0.575675] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.575685] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02
[ 0.575691] pci 0000:00:0c.0: IO window: disabled
[ 0.575705] pci 0000:00:0c.0: MEM window: disabled
[ 0.575716] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.575735] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
[ 0.575743] pci 0000:00:10.0: IO window: 0xe000-0xefff
[ 0.575752] pci 0000:00:10.0: MEM window: 0xfaf00000-0xfbffffff
[ 0.575760] pci 0000:00:10.0: PREFETCH window: 0x000000e0000000-0x000000f9ffffff
[ 0.575771] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04
[ 0.575777] pci 0000:00:15.0: IO window: disabled
[ 0.575792] pci 0000:00:15.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.575804] pci 0000:00:15.0: PREFETCH window: disabled
[ 0.575822] pci 0000:00:16.0: PCI bridge, secondary bus 0000:05
[ 0.575828] pci 0000:00:16.0: IO window: disabled
[ 0.575842] pci 0000:00:16.0: MEM window: disabled
[ 0.575853] pci 0000:00:16.0: PREFETCH window: disabled
[ 0.575872] pci 0000:00:17.0: PCI bridge, secondary bus 0000:06
[ 0.575877] pci 0000:00:17.0: IO window: disabled
[ 0.575892] pci 0000:00:17.0: MEM window: disabled
[ 0.575903] pci 0000:00:17.0: PREFETCH window: disabled
[ 0.575922] pci 0000:00:18.0: PCI bridge, secondary bus 0000:07
[ 0.575927] pci 0000:00:18.0: IO window: disabled
[ 0.575941] pci 0000:00:18.0: MEM window: disabled
[ 0.575953] pci 0000:00:18.0: PREFETCH window: disabled
[ 0.575985] pci 0000:00:09.0: setting latency timer to 64
[ 0.577232] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[ 0.577243] alloc irq_desc for 23 on cpu 0 node 0
[ 0.577249] alloc kstat_irqs on cpu 0 node 0
[ 0.577278] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23
[ 0.577292] pci 0000:00:0c.0: setting latency timer to 64
[ 0.577309] pci 0000:00:10.0: setting latency timer to 64
[ 0.578497] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[ 0.578506] alloc irq_desc for 22 on cpu 0 node 0
[ 0.578511] alloc kstat_irqs on cpu 0 node 0
[ 0.578524] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22
[ 0.578538] pci 0000:00:15.0: setting latency timer to 64
[ 0.579718] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[ 0.579727] alloc irq_desc for 21 on cpu 0 node 0
[ 0.579733] alloc kstat_irqs on cpu 0 node 0
[ 0.579744] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21
[ 0.579759] pci 0000:00:16.0: setting latency timer to 64
[ 0.580940] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20
[ 0.580949] alloc irq_desc for 20 on cpu 0 node 0
[ 0.580954] alloc kstat_irqs on cpu 0 node 0
[ 0.580966] pci 0000:00:17.0: PCI INT A -> Link[LRP5] -> GSI 20 (level, low) -> IRQ 20
[ 0.580981] pci 0000:00:17.0: setting latency timer to 64
[ 0.582168] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23
[ 0.582178] pci 0000:00:18.0: PCI INT A -> Link[LRP6] -> GSI 23 (level, low) -> IRQ 23
[ 0.582193] pci 0000:00:18.0: setting latency timer to 64
[ 0.582205] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.582213] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.582221] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.582228] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.582236] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.582243] pci_bus 0000:03: resource 1 mem: [0xfaf00000-0xfbffffff]
[ 0.582250] pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xf9ffffff]
[ 0.582270] pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.582413] NET: Registered protocol family 2
[ 0.593427] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.595450] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.598669] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.599480] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.599488] TCP reno registered
[ 0.602574] NET: Registered protocol family 1
[ 0.602759] Trying to unpack rootfs image as initramfs...
[ 0.783585] Freeing initrd memory: 2802k freed
[ 0.791814] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.791826] Scanning for low memory corruption every 60 seconds
[ 0.792691] audit: initializing netlink socket (disabled)
[ 0.792723] type=2000 audit(1258490691.792:1): initialized
[ 0.800853] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.818706] VFS: Disk quotas dquot_6.5.2
[ 0.818962] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.825454] Btrfs loaded
[ 0.825474] msgmni has been set to 6530
[ 0.825798] SELinux: Registering netfilter hooks
[ 0.828413] cryptomgr_test used greatest stack depth: 6064 bytes left
[ 0.828723] alg: No test for stdrng (krng)
[ 0.829215] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.829224] io scheduler noop registered
[ 0.829229] io scheduler fifo registered
[ 0.829235] io scheduler anticipatory registered
[ 0.829240] io scheduler deadline registered
[ 0.829673] io scheduler cfq registered
[ 0.830019] io scheduler bfq registered (default)
[ 0.830027] io scheduler vr registered
[ 0.845192] pci 0000:00:04.1: EHCI: BIOS handoff
[ 0.874174] pci 0000:00:06.1: EHCI: BIOS handoff
[ 1.974145] pci 0000:00:06.1: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 1.974504] pci 0000:03:00.0: Boot video device
[ 1.975160] alloc irq_desc for 24 on cpu 0 node 0
[ 1.975168] alloc kstat_irqs on cpu 0 node 0
[ 1.975198] pcieport-driver 0000:00:0c.0: irq 24 for MSI/MSI-X
[ 1.975249] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.975910] alloc irq_desc for 25 on cpu 0 node 0
[ 1.975918] alloc kstat_irqs on cpu 0 node 0
[ 1.975948] pcieport-driver 0000:00:15.0: irq 25 for MSI/MSI-X
[ 1.975999] pcieport-driver 0000:00:15.0: setting latency timer to 64
[ 1.976590] alloc irq_desc for 26 on cpu 0 node 0
[ 1.976597] alloc kstat_irqs on cpu 0 node 0
[ 1.976625] pcieport-driver 0000:00:16.0: irq 26 for MSI/MSI-X
[ 1.976675] pcieport-driver 0000:00:16.0: setting latency timer to 64
[ 1.977245] alloc irq_desc for 27 on cpu 0 node 0
[ 1.977251] alloc kstat_irqs on cpu 0 node 0
[ 1.977289] pcieport-driver 0000:00:17.0: irq 27 for MSI/MSI-X
[ 1.977339] pcieport-driver 0000:00:17.0: setting latency timer to 64
[ 1.977899] alloc irq_desc for 28 on cpu 0 node 0
[ 1.977906] alloc kstat_irqs on cpu 0 node 0
[ 1.977933] pcieport-driver 0000:00:18.0: irq 28 for MSI/MSI-X
[ 1.977983] pcieport-driver 0000:00:18.0: setting latency timer to 64
[ 1.978527] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.989837] Non-volatile memory driver v1.3
[ 1.989844] Linux agpgart interface v0.103
[ 1.990912] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.990926] ACPI: Power Button [PWRF]
[ 1.991212] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.991236] ACPI: Power Button [PWRB]
[ 1.992130] processor ACPI_CPU:00: registered as cooling_device0
[ 1.992145] ACPI: Processor [P001] (supports 8 throttling states)
[ 1.992420] processor ACPI_CPU:01: registered as cooling_device1
[ 1.992674] processor ACPI_CPU:02: registered as cooling_device2
[ 1.992865] processor ACPI_CPU:03: registered as cooling_device3
[ 2.014851] [drm] Initialized drm 1.1.0 20060810
[ 2.015058] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.021841] brd: module loaded
[ 2.024572] loop: module loaded
[ 2.024932] Driver 'sd' needs updating - please use bus_type methods
[ 2.025062] Driver 'sr' needs updating - please use bus_type methods
[ 2.025452] ahci 0000:00:0b.0: version 3.0
[ 2.026716] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
[ 2.026728] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
[ 2.026806] alloc irq_desc for 29 on cpu 0 node 0
[ 2.026812] alloc kstat_irqs on cpu 0 node 0
[ 2.026831] ahci 0000:00:0b.0: irq 29 for MSI/MSI-X
[ 2.027023] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 2.027033] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part
[ 2.027043] ahci 0000:00:0b.0: setting latency timer to 64
[ 2.027933] scsi0 : ahci
[ 2.028859] scsi1 : ahci
[ 2.029330] scsi2 : ahci
[ 2.029701] scsi3 : ahci
[ 2.030062] scsi4 : ahci
[ 2.030422] scsi5 : ahci
[ 2.031045] ata1: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76100 irq 29
[ 2.031055] ata2: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76180 irq 29
[ 2.031063] ata3: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76200 irq 29
[ 2.031071] ata4: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76280 irq 29
[ 2.031078] ata5: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76300 irq 29
[ 2.031086] ata6: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76380 irq 29
[ 2.031961] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 2.033252] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 2.033277] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
[ 2.033289] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 2.086760] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:01:2e:23:24:2d
[ 2.086771] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
[ 2.087316] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.087324] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
[ 2.088617] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[ 2.088629] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[ 2.088665] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 2.088672] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 2.088868] drivers/usb/core/inode.c: creating file 'devices'
[ 2.088884] drivers/usb/core/inode.c: creating file '001'
[ 2.088898] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 2.088916] ehci_hcd 0000:00:04.1: reset hcs_params 0x101c86 dbg=1 cc=1 pcc=12 !ppc ports=6
[ 2.088930] ehci_hcd 0000:00:04.1: reset portroute 0 0 0 0 0 0
[ 2.088938] ehci_hcd 0000:00:04.1: reset hcc_params a086 caching frame 256/512/1024 park
[ 2.088984] ehci_hcd 0000:00:04.1: park 0
[ 2.088994] ehci_hcd 0000:00:04.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 2.089018] ehci_hcd 0000:00:04.1: debug port 1
[ 2.089030] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 2.089036] ehci_hcd 0000:00:04.1: supports USB remote wakeup
[ 2.089078] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfae7ec00
[ 2.089089] ehci_hcd 0000:00:04.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 2.089103] ehci_hcd 0000:00:04.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 2.095271] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 2.095351] usb usb1: default language 0x0409
[ 2.095371] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.095378] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.095385] usb usb1: Product: EHCI Host Controller
[ 2.095390] usb usb1: Manufacturer: Linux 2.6.30-zen10 ehci_hcd
[ 2.095396] usb usb1: SerialNumber: 0000:00:04.1
[ 2.095518] usb usb1: uevent
[ 2.095656] usb usb1: usb_probe_device
[ 2.095663] usb usb1: configuration #1 chosen from 1 choice
[ 2.095683] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.095759] usb 1-0:1.0: uevent
[ 2.095898] hub 1-0:1.0: usb_probe_interface
[ 2.095904] hub 1-0:1.0: usb_probe_interface - got id
[ 2.095912] hub 1-0:1.0: USB hub found
[ 2.095936] hub 1-0:1.0: 6 ports detected
[ 2.095941] hub 1-0:1.0: standalone hub
[ 2.095946] hub 1-0:1.0: no power switching (usb 1.0)
[ 2.095951] hub 1-0:1.0: individual port over-current protection
[ 2.095957] hub 1-0:1.0: power on to power good time: 20ms
[ 2.095970] hub 1-0:1.0: local power source is good
[ 2.095976] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 2.096331] drivers/usb/core/inode.c: creating file '001'
[ 2.097748] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 23
[ 2.097760] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 23 (level, low) -> IRQ 23
[ 2.097791] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 2.097799] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 2.097954] drivers/usb/core/inode.c: creating file '002'
[ 2.097974] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 2.097995] ehci_hcd 0000:00:06.1: reset hcs_params 0x101c86 dbg=1 cc=1 pcc=12 !ppc ports=6
[ 2.098011] ehci_hcd 0000:00:06.1: reset portroute 0 0 0 0 0 0
[ 2.098022] ehci_hcd 0000:00:06.1: reset hcc_params a086 caching frame 256/512/1024 park
[ 2.098060] ehci_hcd 0000:00:06.1: park 0
[ 2.098071] ehci_hcd 0000:00:06.1: reset command 080b1a park=3 ithresh=8 Periodic period=256 Reset HALT
[ 2.098090] ehci_hcd 0000:00:06.1: debug port 1
[ 2.098099] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
[ 2.098105] ehci_hcd 0000:00:06.1: supports USB remote wakeup
[ 2.098143] ehci_hcd 0000:00:06.1: irq 23, io mem 0xfae7e800
[ 2.098154] ehci_hcd 0000:00:06.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 2.098168] ehci_hcd 0000:00:06.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 2.104271] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 2.104342] usb usb2: default language 0x0409
[ 2.104361] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.104368] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.104375] usb usb2: Product: EHCI Host Controller
[ 2.104381] usb usb2: Manufacturer: Linux 2.6.30-zen10 ehci_hcd
[ 2.104387] usb usb2: SerialNumber: 0000:00:06.1
[ 2.104504] usb usb2: uevent
[ 2.104643] usb usb2: usb_probe_device
[ 2.104651] usb usb2: configuration #1 chosen from 1 choice
[ 2.104670] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 2.104716] usb 2-0:1.0: uevent
[ 2.104853] hub 2-0:1.0: usb_probe_interface
[ 2.104860] hub 2-0:1.0: usb_probe_interface - got id
[ 2.104867] hub 2-0:1.0: USB hub found
[ 2.104890] hub 2-0:1.0: 6 ports detected
[ 2.104895] hub 2-0:1.0: standalone hub
[ 2.104900] hub 2-0:1.0: no power switching (usb 1.0)
[ 2.104905] hub 2-0:1.0: individual port over-current protection
[ 2.104911] hub 2-0:1.0: power on to power good time: 20ms
[ 2.104924] hub 2-0:1.0: local power source is good
[ 2.104930] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 2.105174] drivers/usb/core/inode.c: creating file '001'
[ 2.105542] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.105549] ohci_hcd: block sizes: ed 80 td 96
[ 2.106814] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[ 2.106825] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
[ 2.106859] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 2.106866] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 2.107026] drivers/usb/core/inode.c: creating file '003'
[ 2.107053] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 2.107099] ohci_hcd 0000:00:04.0: created debug files
[ 2.107105] ohci_hcd 0000:00:04.0: supports USB remote wakeup
[ 2.107144] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfae7f000
[ 2.160276] ohci_hcd 0000:00:04.0: OHCI controller state
[ 2.160285] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers
[ 2.160294] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3
[ 2.160302] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0
[ 2.160311] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF
[ 2.160319] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 2.160329] ohci_hcd 0000:00:04.0: hcca frame #0003
[ 2.160337] ohci_hcd 0000:00:04.0: roothub.a 01001206 POTPGT=1 NOCP NPS NDP=6(6)
[ 2.160345] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 2.160353] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE
[ 2.160363] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS
[ 2.160372] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS
[ 2.160382] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS
[ 2.160391] ohci_hcd 0000:00:04.0: roothub.portstatus [3] 0x00000100 PPS
[ 2.160400] ohci_hcd 0000:00:04.0: roothub.portstatus [4] 0x00000100 PPS
[ 2.160409] ohci_hcd 0000:00:04.0: roothub.portstatus [5] 0x00000100 PPS
[ 2.160441] usb usb3: default language 0x0409
[ 2.160460] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.160468] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.160474] usb usb3: Product: OHCI Host Controller
[ 2.160480] usb usb3: Manufacturer: Linux 2.6.30-zen10 ohci_hcd
[ 2.160486] usb usb3: SerialNumber: 0000:00:04.0
[ 2.160608] usb usb3: uevent
[ 2.160738] usb usb3: usb_probe_device
[ 2.160745] usb usb3: configuration #1 chosen from 1 choice
[ 2.160764] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 2.160809] usb 3-0:1.0: uevent
[ 2.160949] hub 3-0:1.0: usb_probe_interface
[ 2.160956] hub 3-0:1.0: usb_probe_interface - got id
[ 2.160963] hub 3-0:1.0: USB hub found
[ 2.160988] hub 3-0:1.0: 6 ports detected
[ 2.160993] hub 3-0:1.0: standalone hub
[ 2.160998] hub 3-0:1.0: no power switching (usb 1.0)
[ 2.161003] hub 3-0:1.0: no over-current protection
[ 2.161009] hub 3-0:1.0: power on to power good time: 2ms
[ 2.161023] hub 3-0:1.0: local power source is good
[ 2.161029] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 2.161283] drivers/usb/core/inode.c: creating file '001'
[ 2.162741] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[ 2.162752] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
[ 2.162789] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 2.162797] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 2.162968] drivers/usb/core/inode.c: creating file '004'
[ 2.162985] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 2.163040] ohci_hcd 0000:00:06.0: created debug files
[ 2.163047] ohci_hcd 0000:00:06.0: supports USB remote wakeup
[ 2.163084] ohci_hcd 0000:00:06.0: irq 21, io mem 0xfae7d000
[ 2.195170] ehci_hcd 0000:00:04.1: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
[ 2.195180] hub 1-0:1.0: port 3: status 0501 change 0001
[ 2.195203] ehci_hcd 0000:00:04.1: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
[ 2.195212] hub 1-0:1.0: port 6: status 0501 change 0001
[ 2.204171] ehci_hcd 0000:00:06.1: GetStatus port 4 status 001403 POWER sig=k CSC CONNECT
[ 2.204181] hub 2-0:1.0: port 4: status 0501 change 0001
[ 2.204200] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
[ 2.204209] hub 2-0:1.0: port 6: status 0501 change 0001
[ 2.216277] ohci_hcd 0000:00:06.0: OHCI controller state
[ 2.216286] ohci_hcd 0000:00:06.0: OHCI 1.0, NO legacy support registers
[ 2.216296] ohci_hcd 0000:00:06.0: control 0x683 RWE RWC HCFS=operational CBSR=3
[ 2.216304] ohci_hcd 0000:00:06.0: cmdstatus 0x00000 SOC=0
[ 2.216312] ohci_hcd 0000:00:06.0: intrstatus 0x00000004 SF
[ 2.216321] ohci_hcd 0000:00:06.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 2.216330] ohci_hcd 0000:00:06.0: hcca frame #0003
[ 2.216339] ohci_hcd 0000:00:06.0: roothub.a 01001206 POTPGT=1 NOCP NPS NDP=6(6)
[ 2.216347] ohci_hcd 0000:00:06.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 2.216355] ohci_hcd 0000:00:06.0: roothub.status 00008000 DRWE
[ 2.216364] ohci_hcd 0000:00:06.0: roothub.portstatus [0] 0x00000100 PPS
[ 2.216373] ohci_hcd 0000:00:06.0: roothub.portstatus [1] 0x00000100 PPS
[ 2.216382] ohci_hcd 0000:00:06.0: roothub.portstatus [2] 0x00000100 PPS
[ 2.216391] ohci_hcd 0000:00:06.0: roothub.portstatus [3] 0x00000100 PPS
[ 2.216401] ohci_hcd 0000:00:06.0: roothub.portstatus [4] 0x00000100 PPS
[ 2.216410] ohci_hcd 0000:00:06.0: roothub.portstatus [5] 0x00000100 PPS
[ 2.216442] usb usb4: default language 0x0409
[ 2.216461] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.216469] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.216475] usb usb4: Product: OHCI Host Controller
[ 2.216481] usb usb4: Manufacturer: Linux 2.6.30-zen10 ohci_hcd
[ 2.216487] usb usb4: SerialNumber: 0000:00:06.0
[ 2.216607] usb usb4: uevent
[ 2.216745] usb usb4: usb_probe_device
[ 2.216754] usb usb4: configuration #1 chosen from 1 choice
[ 2.216775] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 2.216827] usb 4-0:1.0: uevent
[ 2.216937] hub 4-0:1.0: usb_probe_interface
[ 2.216943] hub 4-0:1.0: usb_probe_interface - got id
[ 2.216949] hub 4-0:1.0: USB hub found
[ 2.216973] hub 4-0:1.0: 6 ports detected
[ 2.216978] hub 4-0:1.0: standalone hub
[ 2.216982] hub 4-0:1.0: no power switching (usb 1.0)
[ 2.216988] hub 4-0:1.0: no over-current protection
[ 2.216993] hub 4-0:1.0: power on to power good time: 2ms
[ 2.217007] hub 4-0:1.0: local power source is good
[ 2.217013] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 2.217243] drivers/usb/core/inode.c: creating file '001'
[ 2.217784] usbcore: registered new interface driver usblp
[ 2.217794] Initializing USB Mass Storage driver...
[ 2.217942] usbcore: registered new interface driver usb-storage
[ 2.217950] USB Mass Storage support registered.
[ 2.218116] usbcore: registered new interface driver libusual
[ 2.218618] PNP: No PS/2 controller found. Probing ports directly.
[ 2.220277] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.220289] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.220541] mice: PS/2 mouse device common for all mice
[ 2.222560] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.222951] cpuidle: using governor ladder
[ 2.226285] usbcore: registered new interface driver hiddev
[ 2.226417] usbcore: registered new interface driver usbhid
[ 2.226430] usbhid: v2.6:USB HID core driver
[ 2.226617] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 2.228806] modprobe used greatest stack depth: 5920 bytes left
[ 2.229449] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 2.230662] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[ 2.230674] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
[ 2.230729] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 2.261189] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 2.295154] hub 1-0:1.0: state 7 ports 6 chg 0048 evt 0000
[ 2.295171] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[ 2.336153] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.336402] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.336436] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.336451] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.336507] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.346150] ehci_hcd 0000:00:04.1: port 3 full speed --> companion
[ 2.346162] ehci_hcd 0000:00:04.1: GetStatus port 3 status 003001 POWER OWNER sig=se0 CONNECT
[ 2.346173] hub 1-0:1.0: port 3 not reset yet, waiting 50ms
[ 2.397151] ehci_hcd 0000:00:04.1: GetStatus port 3 status 003802 POWER OWNER sig=j CSC
[ 2.397187] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 2.397202] ehci_hcd 0000:00:04.1: port 6 low speed --> companion
[ 2.434021] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[ 2.448151] ehci_hcd 0000:00:04.1: GetStatus port 6 status 003402 POWER OWNER sig=k CSC
[ 2.448180] hub 2-0:1.0: state 7 ports 6 chg 0050 evt 0000
[ 2.448193] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 2.448208] ehci_hcd 0000:00:06.1: port 4 low speed --> companion
[ 2.489026] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.492638] ata1.00: ATA-6: WDC WD740GD-00FLA0, 21.08U21, max UDMA/133
[ 2.492646] ata1.00: 145226112 sectors, multi 16: LBA48
[ 2.492671] ata1.00: applying bridge limits
[ 2.497415] ata1.00: configured for UDMA/100
[ 2.497665] scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-00FL 21.0 PQ: 0 ANSI: 5
[ 2.498576] sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors: (74.3 GB/69.2 GiB)
[ 2.498647] sd 0:0:0:0: [sda] Write Protect is off
[ 2.498656] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.498750] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.498764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.499167] ehci_hcd 0000:00:06.1: GetStatus port 4 status 003402 POWER OWNER sig=k CSC
[ 2.499208] hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 2.499226] sda: sda1 sda2
[ 2.511458] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.518283] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input2
[ 2.550365] ehci_hcd 0000:00:06.1: port 6 high speed
[ 2.550376] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 2.601152] usb 2-6: new high speed USB device using ehci_hcd and address 3
[ 2.652382] ehci_hcd 0000:00:06.1: port 6 high speed
[ 2.652396] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 2.677598] ALSA device list:
[ 2.677604] #0: HDA NVidia at 0xfae78000 irq 20
[ 2.677843] Netfilter messages via NETLINK v0.30.
[ 2.677885] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.678616] ctnetlink v0.93: registering with nfnetlink.
[ 2.680371] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.680455] TCP cubic registered
[ 2.680460] Initializing XFRM netlink socket
[ 2.681689] NET: Registered protocol family 10
[ 2.685437] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.685607] IPv6 over IPv4 tunneling driver
[ 2.687630] NET: Registered protocol family 17
[ 2.688769] RPC: Registered udp transport module.
[ 2.688775] RPC: Registered tcp transport module.
[ 2.689448] TuxOnIce 3.0.1 (http://tuxonice.net)
[ 2.689622] TuxOnIce: Resume= parameter is empty. Hibernating will be disabled.
[ 2.689632] PM: Resume from disk failed.
[ 2.689682] registered taskstats version 1
[ 2.690003] Magic number: 1:116:751
[ 2.690058] tty ttyS2: hash matches
[ 2.690395] Freeing unused kernel memory: 544k freed
[ 2.690741] Write protecting the kernel read-only data: 7328k
[ 2.691596] ZenSched: Running BFS CPU scheduler v304 by Con Kolivas.
[ 2.715696] usb 2-6: default language 0x0409
[ 2.715940] usb 2-6: New USB device found, idVendor=8086, idProduct=1403
[ 2.715948] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.715955] usb 2-6: Product: Intel(R) WiMAX Connection 2400
[ 2.715961] usb 2-6: Manufacturer: Intel(R) Corporation
[ 2.716123] usb 2-6: uevent
[ 2.716297] usb 2-6: usb_probe_device
[ 2.716308] usb 2-6: configuration #1 chosen from 1 choice
[ 2.716447] usb 2-6: adding 2-6:1.0 (config #1, interface 0)
[ 2.716506] usb 2-6:1.0: uevent
[ 2.717613] drivers/usb/core/inode.c: creating file '003'
[ 2.717800] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
[ 2.717818] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [3] = 0x00010301 CSC LSDA PPS CCS
[ 2.717834] hub 4-0:1.0: port 4, status 0301, change 0001, 1.5 Mb/s
[ 2.821152] hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x301
[ 2.927151] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [3] = 0x00100303 PRSC LSDA PPS PES CCS
[ 2.978151] usb 4-4: new low speed USB device using ohci_hcd and address 2
[ 3.051934] lvm used greatest stack depth: 5872 bytes left
[ 3.086164] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [3] = 0x00100303 PRSC LSDA PPS PES CCS
[ 3.162298] usb 4-4: skipped 1 descriptor after interface
[ 3.165291] usb 4-4: default language 0x0409
[ 3.173293] usb 4-4: New USB device found, idVendor=046d, idProduct=c50e
[ 3.173301] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.173308] usb 4-4: Product: USB Receiver
[ 3.173314] usb 4-4: Manufacturer: Logitech
[ 3.173466] usb 4-4: uevent
[ 3.173515] usb 4-4: usb_probe_device
[ 3.173524] usb 4-4: configuration #1 chosen from 1 choice
[ 3.176300] usb 4-4: adding 4-4:1.0 (config #1, interface 0)
[ 3.176352] usb 4-4:1.0: uevent
[ 3.176427] usbhid 4-4:1.0: usb_probe_interface
[ 3.176436] usbhid 4-4:1.0: usb_probe_interface - got id
[ 3.189048] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:06.0/usb4/4-4/4-4:1.0/input/input3
[ 3.189349] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:06.0-4/input0
[ 3.189478] drivers/usb/core/inode.c: creating file '002'
[ 3.189616] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 3.189647] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0048
[ 3.189663] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [2] = 0x00010101 CSC PPS CCS
[ 3.189677] hub 3-0:1.0: port 3, status 0101, change 0001, 12 Mb/s
[ 3.202410] EXT4-fs: barriers enabled
[ 3.211544] kjournald2 starting: pid 1004, dev dm-0:8, commit interval 5 seconds
[ 3.211612] EXT4-fs: delayed allocation enabled
[ 3.211619] EXT4-fs: file extents enabled
[ 3.236328] EXT4-fs: mballoc enabled
[ 3.236364] EXT4-fs: mounted filesystem dm-0 with ordered data mode
[ 3.293152] hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
[ 3.294104] SELinux: Disabled at runtime.
[ 3.294111] SELinux: Unregistering netfilter hooks
[ 3.306034] type=1404 audit(1258490694.306:2): selinux=0 auid=4294967295 ses=4294967295
[ 3.399163] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS
[ 3.450155] usb 3-3: new full speed USB device using ohci_hcd and address 2
[ 3.498298] async/0 used greatest stack depth: 5776 bytes left
[ 3.511154] async/6 used greatest stack depth: 5752 bytes left
[ 3.557152] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS
[ 3.622143] usb 3-3: ep0 maxpacket = 8
[ 3.632294] usb 3-3: default language 0x0409
[ 3.641296] usb 3-3: New USB device found, idVendor=058f, idProduct=9360
[ 3.641305] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.641313] usb 3-3: Product: USB Reader
[ 3.641318] usb 3-3: Manufacturer:
[ 3.641323] usb 3-3: SerialNumber: 2004888
[ 3.641483] usb 3-3: uevent
[ 3.641517] usb 3-3: usb_probe_device
[ 3.641524] usb 3-3: configuration #1 chosen from 1 choice
[ 3.644314] usb 3-3: adding 3-3:1.0 (config #1, interface 0)
[ 3.644388] usb 3-3:1.0: uevent
[ 3.644438] usb-storage 3-3:1.0: usb_probe_interface
[ 3.644453] usb-storage 3-3:1.0: usb_probe_interface - got id
[ 3.644595] scsi6 : SCSI emulation for USB Mass Storage devices
[ 3.644777] usb-storage: device found at 2
[ 3.644784] usb-storage: waiting for device to settle before scanning
[ 3.644964] drivers/usb/core/inode.c: creating file '002'
[ 3.645082] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [5] = 0x00010301 CSC LSDA PPS CCS
[ 3.645098] hub 3-0:1.0: port 6, status 0301, change 0001, 1.5 Mb/s
[ 3.668692] runlevel used greatest stack depth: 5104 bytes left
[ 3.749165] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 3.761125] mount used greatest stack depth: 5080 bytes left
[ 3.845991] awk used greatest stack depth: 4672 bytes left
[ 3.855165] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [5] = 0x00100303 PRSC LSDA PPS PES CCS
[ 3.906166] usb 3-6: new low speed USB device using ohci_hcd and address 3
[ 4.013292] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [5] = 0x00100303 PRSC LSDA PPS PES CCS
[ 4.086331] usb 3-6: skipped 1 descriptor after interface
[ 4.089310] usb 3-6: default language 0x0409
[ 4.096311] usb 3-6: New USB device found, idVendor=046d, idProduct=c315
[ 4.096321] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.096328] usb 3-6: Product: Logitech USB Keyboard
[ 4.096334] usb 3-6: Manufacturer: Logitech
[ 4.096491] usb 3-6: uevent
[ 4.096524] usb 3-6: usb_probe_device
[ 4.096532] usb 3-6: configuration #1 chosen from 1 choice
[ 4.099299] usb 3-6: adding 3-6:1.0 (config #1, interface 0)
[ 4.099354] usb 3-6:1.0: uevent
[ 4.099408] usbhid 3-6:1.0: usb_probe_interface
[ 4.099414] usbhid 3-6:1.0: usb_probe_interface - got id
[ 4.107849] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.0/input/input4
[ 4.108050] generic-usb 0003:046D:C315.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:04.0-6/input0
[ 4.108161] drivers/usb/core/inode.c: creating file '003'
[ 4.108277] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0010
[ 4.108308] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
[ 4.108323] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 4.434770] udev: starting version 141
[ 4.519177] usb usb3: uevent
[ 4.519262] usb 3-0:1.0: uevent
[ 4.519423] usb 3-3: uevent
[ 4.519502] usb 3-3:1.0: uevent
[ 4.519642] usb 3-6:1.0: uevent
[ 4.519954] usb 3-6: uevent
[ 4.520043] usb 3-6: uevent
[ 4.520099] usb 3-6:1.0: uevent
[ 4.520948] usb usb1: uevent
[ 4.521093] usb 1-0:1.0: uevent
[ 4.521460] usb usb4: uevent
[ 4.521540] usb 4-0:1.0: uevent
[ 4.521705] usb 4-4: uevent
[ 4.521786] usb 4-4:1.0: uevent
[ 4.525377] usb usb2: uevent
[ 4.525467] usb 2-0:1.0: uevent
[ 4.525633] usb 2-6: uevent
[ 4.525712] usb 2-6:1.0: uevent
[ 4.682410] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4d00
[ 4.682496] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4e00
[ 4.709005] usb 3-6:1.0: uevent
[ 4.709497] usb 3-6: uevent
[ 4.723651] usb 4-4:1.0: uevent
[ 4.724036] usb 4-4: uevent
[ 4.729395] usb 4-4:1.0: uevent
[ 4.729781] usb 4-4: uevent
[ 4.892079] i2400m_usb 2-6:1.0: usb_probe_interface
[ 4.892091] i2400m_usb 2-6:1.0: usb_probe_interface - got id
[ 4.892364] usb 2-6: link qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.903348] usb 2-6: unlink qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.903401] ehci_hcd 0000:00:06.1: reused qh ffff8800ce44e240 schedule
[ 4.903414] usb 2-6: link qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.905342] usb 2-6: unlink qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.905369] ehci_hcd 0000:00:06.1: reused qh ffff8800ce44e240 schedule
[ 4.905380] usb 2-6: link qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.909334] usb 2-6: unlink qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.951020] ehci_hcd 0000:00:06.1: reused qh ffff8800ce44e240 schedule
[ 4.951036] usb 2-6: link qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.951351] usb 2-6: unlink qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.951381] ehci_hcd 0000:00:06.1: reused qh ffff8800ce44e240 schedule
[ 4.951388] usb 2-6: link qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.955337] usb 2-6: unlink qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.955462] ehci_hcd 0000:00:06.1: reused qh ffff8800ce44e240 schedule
[ 4.955475] usb 2-6: link qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.967341] usb 2-6: unlink qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.968387] ehci_hcd 0000:00:06.1: reused qh ffff8800ce44e240 schedule
[ 4.968403] usb 2-6: link qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.969345] usb 2-6: unlink qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.969378] ehci_hcd 0000:00:06.1: reused qh ffff8800ce44e240 schedule
[ 4.969393] usb 2-6: link qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.971331] usb 2-6: unlink qh2-0001/ffff8800ce44e240 start 1 [2/0 us]
[ 4.974341] i2400m_usb 2-6:1.0: firmware: requesting i2400m-fw-usb-1.4.sbcf
[ 5.489862] i2400m_usb 2-6:1.0: fw i2400m-fw-usb-1.4.sbcf: cannot load file: -2
[ 5.489872] i2400m_usb 2-6:1.0: firmware: requesting i2400m-fw-usb-1.3.sbcf
[ 5.501245] i2400m_usb 2-6:1.0: fw i2400m-fw-usb-1.3.sbcf: cannot load file: -2
[ 5.501257] i2400m_usb 2-6:1.0: Could not find a usable firmware image
[ 5.501268] i2400m_usb 2-6:1.0: cannot bootstrap device: -2
[ 5.511043] i2400m_usb 2-6:1.0: cannot setup device: -2
[ 5.511069] i2400m_usb: probe of 2-6:1.0 failed with error -2
[ 5.511129] usbcore: registered new interface driver i2400m_usb
[ 5.512835] modprobe used greatest stack depth: 4496 bytes left
[ 5.610962] ip used greatest stack depth: 4360 bytes left
[ 5.704039] hub 1-0:1.0: hub_suspend
[ 5.704063] usb usb1: bus auto-suspend
[ 5.704072] ehci_hcd 0000:00:04.1: suspend root hub
[ 6.063662] device-mapper: table: 253:2: linear: dm-linear: Device lookup failed
[ 6.063671] device-mapper: ioctl: error adding target to table
[ 6.306744] EXT4 FS on dm-0, internal journal on dm-0:8
[ 6.432351] dd used greatest stack depth: 4128 bytes left
[ 6.851728] Adding 5373944k swap on /dev/mapper/vg_raiion-lv_swap. Priority:-1 extents:1 across:5373944k
[ 7.273823] microcode: CPU0 updated from revision 0x20d to 0x213, date = 2008-12-02
[ 7.711438] microcode: CPU1 updated from revision 0x20d to 0x213, date = 2008-12-02
[ 8.145436] microcode: CPU2 updated from revision 0x20d to 0x213, date = 2008-12-02
[ 8.652349] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 8.652880] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 8.663734] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 8.668833] usb 3-3:1.0: uevent
[ 8.669195] usb 3-3: uevent
[ 8.670199] microcode: CPU3 updated from revision 0x20d to 0x213, date = 2008-12-02
[ 8.670406] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 8.670981] sd 6:0:0:1: Attached scsi generic sg2 type 0
[ 8.681789] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 8.688436] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 8.688592] usb 3-3:1.0: uevent
[ 8.689003] sd 6:0:0:2: Attached scsi generic sg3 type 0
[ 8.689068] usb 3-3: uevent
[ 8.708819] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 8.715273] usb 3-3:1.0: uevent
[ 8.715402] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 8.715828] usb 3-3: uevent
[ 8.715981] sd 6:0:0:3: Attached scsi generic sg4 type 0
[ 8.728827] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 8.737135] usb 3-3:1.0: uevent
[ 8.737853] usb 3-3: uevent
[ 8.826178] usb-storage: device scan complete
[ 10.923089] usb usb3: uevent
[ 10.923292] usb 3-0:1.0: uevent
[ 10.923623] usb 3-3: uevent
[ 10.923848] usb 3-3:1.0: uevent
[ 10.929433] usb 3-6: uevent
[ 10.929682] usb 3-6:1.0: uevent
[ 10.931608] usb usb1: uevent
[ 10.931795] usb 1-0:1.0: uevent
[ 10.932647] usb usb4: uevent
[ 10.932834] usb 4-0:1.0: uevent
[ 10.933228] usb 4-4: uevent
[ 10.933487] usb 4-4:1.0: uevent
[ 10.935637] usb usb2: uevent
[ 10.935824] usb 2-0:1.0: uevent
[ 10.936215] usb 2-6: uevent
[ 10.936412] usb 2-6:1.0: uevent
[ 11.771574] usb usb1: usb auto-resume
[ 11.771586] ehci_hcd 0000:00:04.1: resume root hub
[ 11.812281] hub 1-0:1.0: hub_resume
[ 11.812343] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 14.698304] hub 1-0:1.0: hub_suspend
[ 14.698330] usb usb1: bus auto-suspend
[ 14.698340] ehci_hcd 0000:00:04.1: suspend root hub
[ 27.695563] usb 2-6: usb auto-suspend
[ 29.783454] Too big adjustment 32
[ 29.809056] Too big adjustment 32
[ 29.850933] Too big adjustment 32
[ 29.859964] Too big adjustment 32
[ 29.900662] Too big adjustment 32
[ 29.909925] Too big adjustment 32
[ 29.987452] Too big adjustment 32
[ 30.695410] hub 2-0:1.0: hub_suspend
[ 30.695429] usb usb2: bus auto-suspend
[ 30.695436] ehci_hcd 0000:00:06.1: suspend root hub
[ 32.587021] eth0: no IPv6 routers present
[ 34.525615] kbuildsycoca4 used greatest stack depth: 4096 bytes left
[ 42.000193] usb usb2: usb auto-resume
[ 42.000205] ehci_hcd 0000:00:06.1: resume root hub
[ 42.041441] hub 2-0:1.0: hub_resume
[ 42.041503] hub 2-0:1.0: port 6: status 0507 change 0000
[ 42.041540] usb 2-6: usb auto-resume
[ 42.041566] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 42.067059] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 42.078299] usb 2-6: finish resume
[ 42.078780] usb usb1: usb auto-resume
[ 42.078789] ehci_hcd 0000:00:04.1: resume root hub
[ 42.119295] hub 1-0:1.0: hub_resume
[ 42.119395] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 44.695429] hub 1-0:1.0: hub_suspend
[ 44.695451] usb usb1: bus auto-suspend
[ 44.695459] ehci_hcd 0000:00:04.1: suspend root hub
[ 57.698346] usb 2-6: usb auto-suspend
[ 60.704035] hub 2-0:1.0: hub_suspend
[ 60.704054] usb usb2: bus auto-suspend
[ 60.704061] ehci_hcd 0000:00:06.1: suspend root hub
[ 72.029049] usb usb2: usb auto-resume
[ 72.029060] ehci_hcd 0000:00:06.1: resume root hub
[ 72.070396] hub 2-0:1.0: hub_resume
[ 72.070433] hub 2-0:1.0: port 6: status 0507 change 0000
[ 72.070453] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 72.070460] usb 2-6: usb auto-resume
[ 72.096408] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 72.107400] usb 2-6: finish resume
[ 72.107802] usb usb1: usb auto-resume
[ 72.107810] ehci_hcd 0000:00:04.1: resume root hub
[ 72.148398] hub 1-0:1.0: hub_resume
[ 72.148443] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 74.695413] hub 1-0:1.0: hub_suspend
[ 74.695434] usb usb1: bus auto-suspend
[ 74.695440] ehci_hcd 0000:00:04.1: suspend root hub
[ 87.695576] usb 2-6: usb auto-suspend
[ 90.704037] hub 2-0:1.0: hub_suspend
[ 90.704059] usb usb2: bus auto-suspend
[ 90.704066] ehci_hcd 0000:00:06.1: suspend root hub
[ 102.030252] usb usb2: usb auto-resume
[ 102.030266] ehci_hcd 0000:00:06.1: resume root hub
[ 102.071030] hub 2-0:1.0: hub_resume
[ 102.071067] hub 2-0:1.0: port 6: status 0507 change 0000
[ 102.071089] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 102.071096] usb 2-6: usb auto-resume
[ 102.097038] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 102.108029] usb 2-6: finish resume
[ 102.108578] usb usb1: usb auto-resume
[ 102.108587] ehci_hcd 0000:00:04.1: resume root hub
[ 102.149026] hub 1-0:1.0: hub_resume
[ 102.149074] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 104.704064] hub 1-0:1.0: hub_suspend
[ 104.704091] usb usb1: bus auto-suspend
[ 104.704099] ehci_hcd 0000:00:04.1: suspend root hub
[ 117.704192] usb 2-6: usb auto-suspend
[ 120.701159] hub 2-0:1.0: hub_suspend
[ 120.701178] usb usb2: bus auto-suspend
[ 120.701185] ehci_hcd 0000:00:06.1: suspend root hub
[ 132.029680] usb usb2: usb auto-resume
[ 132.029691] ehci_hcd 0000:00:06.1: resume root hub
[ 132.070031] hub 2-0:1.0: hub_resume
[ 132.070151] hub 2-0:1.0: port 6: status 0507 change 0000
[ 132.070187] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 132.070209] usb 2-6: usb auto-resume
[ 132.096079] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 132.107155] usb 2-6: finish resume
[ 132.107650] usb usb1: usb auto-resume
[ 132.107659] ehci_hcd 0000:00:04.1: resume root hub
[ 132.148149] hub 1-0:1.0: hub_resume
[ 132.148211] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 134.704037] hub 1-0:1.0: hub_suspend
[ 134.704057] usb usb1: bus auto-suspend
[ 134.704064] ehci_hcd 0000:00:04.1: suspend root hub
[ 147.701340] usb 2-6: usb auto-suspend
[ 150.701157] hub 2-0:1.0: hub_suspend
[ 150.701176] usb usb2: bus auto-suspend
[ 150.701183] ehci_hcd 0000:00:06.1: suspend root hub
[ 162.029801] usb usb2: usb auto-resume
[ 162.029812] ehci_hcd 0000:00:06.1: resume root hub
[ 162.070146] hub 2-0:1.0: hub_resume
[ 162.070184] hub 2-0:1.0: port 6: status 0507 change 0000
[ 162.070206] usb 2-6: usb auto-resume
[ 162.070225] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 162.096160] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 162.107152] usb 2-6: finish resume
[ 162.107569] usb usb1: usb auto-resume
[ 162.107577] ehci_hcd 0000:00:04.1: resume root hub
[ 162.148146] hub 1-0:1.0: hub_resume
[ 162.148193] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 164.701158] hub 1-0:1.0: hub_suspend
[ 164.701177] usb usb1: bus auto-suspend
[ 164.701184] ehci_hcd 0000:00:04.1: suspend root hub
[ 177.701332] usb 2-6: usb auto-suspend
[ 180.701164] hub 2-0:1.0: hub_suspend
[ 180.701183] usb usb2: bus auto-suspend
[ 180.701190] ehci_hcd 0000:00:06.1: suspend root hub
[ 192.029809] usb usb2: usb auto-resume
[ 192.029820] ehci_hcd 0000:00:06.1: resume root hub
[ 192.070147] hub 2-0:1.0: hub_resume
[ 192.070184] hub 2-0:1.0: port 6: status 0507 change 0000
[ 192.070206] usb 2-6: usb auto-resume
[ 192.070225] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 192.096161] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 192.107152] usb 2-6: finish resume
[ 192.107576] usb usb1: usb auto-resume
[ 192.107585] ehci_hcd 0000:00:04.1: resume root hub
[ 192.148146] hub 1-0:1.0: hub_resume
[ 192.148194] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 194.701157] hub 1-0:1.0: hub_suspend
[ 194.701177] usb usb1: bus auto-suspend
[ 194.701184] ehci_hcd 0000:00:04.1: suspend root hub
[ 207.701340] usb 2-6: usb auto-suspend
[ 210.701157] hub 2-0:1.0: hub_suspend
[ 210.701176] usb usb2: bus auto-suspend
[ 210.701183] ehci_hcd 0000:00:06.1: suspend root hub
[ 222.030821] usb usb2: usb auto-resume
[ 222.030832] ehci_hcd 0000:00:06.1: resume root hub
[ 222.071147] hub 2-0:1.0: hub_resume
[ 222.071184] hub 2-0:1.0: port 6: status 0507 change 0000
[ 222.071206] usb 2-6: usb auto-resume
[ 222.071225] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 222.097160] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 222.108152] usb 2-6: finish resume
[ 222.108593] usb usb1: usb auto-resume
[ 222.108601] ehci_hcd 0000:00:04.1: resume root hub
[ 222.149146] hub 1-0:1.0: hub_resume
[ 222.149199] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 224.704038] hub 1-0:1.0: hub_suspend
[ 224.704059] usb usb1: bus auto-suspend
[ 224.704065] ehci_hcd 0000:00:04.1: suspend root hub
[ 237.701352] usb 2-6: usb auto-suspend
[ 240.704048] hub 2-0:1.0: hub_suspend
[ 240.704069] usb usb2: bus auto-suspend
[ 240.704076] ehci_hcd 0000:00:06.1: suspend root hub
[ 252.030819] usb usb2: usb auto-resume
[ 252.030830] ehci_hcd 0000:00:06.1: resume root hub
[ 252.071189] hub 2-0:1.0: hub_resume
[ 252.071245] hub 2-0:1.0: port 6: status 0507 change 0000
[ 252.071290] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 252.071314] usb 2-6: usb auto-resume
[ 252.097052] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 252.108030] usb 2-6: finish resume
[ 252.108529] usb usb1: usb auto-resume
[ 252.108538] ehci_hcd 0000:00:04.1: resume root hub
[ 252.149023] hub 1-0:1.0: hub_resume
[ 252.149078] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 254.695412] hub 1-0:1.0: hub_suspend
[ 254.695432] usb usb1: bus auto-suspend
[ 254.695439] ehci_hcd 0000:00:04.1: suspend root hub
[ 267.704223] usb 2-6: usb auto-suspend
[ 270.704038] hub 2-0:1.0: hub_suspend
[ 270.704061] usb usb2: bus auto-suspend
[ 270.704070] ehci_hcd 0000:00:06.1: suspend root hub
[ 282.030685] usb usb2: usb auto-resume
[ 282.030696] ehci_hcd 0000:00:06.1: resume root hub
[ 282.071023] hub 2-0:1.0: hub_resume
[ 282.071061] hub 2-0:1.0: port 6: status 0507 change 0000
[ 282.071083] usb 2-6: usb auto-resume
[ 282.071102] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 282.097036] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 282.108028] usb 2-6: finish resume
[ 282.108453] usb usb1: usb auto-resume
[ 282.108461] ehci_hcd 0000:00:04.1: resume root hub
[ 282.149022] hub 1-0:1.0: hub_resume
[ 282.149068] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 284.704033] hub 1-0:1.0: hub_suspend
[ 284.704052] usb usb1: bus auto-suspend
[ 284.704059] ehci_hcd 0000:00:04.1: suspend root hub
[ 297.704212] usb 2-6: usb auto-suspend
[ 300.704036] hub 2-0:1.0: hub_suspend
[ 300.704055] usb usb2: bus auto-suspend
[ 300.704062] ehci_hcd 0000:00:06.1: suspend root hub
[ 312.030956] usb usb2: usb auto-resume
[ 312.030971] ehci_hcd 0000:00:06.1: resume root hub
[ 312.071094] hub 2-0:1.0: hub_resume
[ 312.071167] hub 2-0:1.0: port 6: status 0507 change 0000
[ 312.071216] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 312.071233] usb 2-6: usb auto-resume
[ 312.097122] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 312.108046] usb 2-6: finish resume
[ 312.108538] usb usb1: usb auto-resume
[ 312.108547] ehci_hcd 0000:00:04.1: resume root hub
[ 312.149023] hub 1-0:1.0: hub_resume
[ 312.149070] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 314.704034] hub 1-0:1.0: hub_suspend
[ 314.704054] usb usb1: bus auto-suspend
[ 314.704061] ehci_hcd 0000:00:04.1: suspend root hub
[ 327.704114] usb 2-6: usb auto-suspend
[ 330.704033] hub 2-0:1.0: hub_suspend
[ 330.704052] usb usb2: bus auto-suspend
[ 330.704058] ehci_hcd 0000:00:06.1: suspend root hub
[ 342.401923] usb usb2: usb auto-resume
[ 342.401934] ehci_hcd 0000:00:06.1: resume root hub
[ 342.442023] hub 2-0:1.0: hub_resume
[ 342.442061] hub 2-0:1.0: port 6: status 0507 change 0000
[ 342.442084] usb 2-6: usb auto-resume
[ 342.442103] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 342.468037] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 342.479029] usb 2-6: finish resume
[ 342.479440] usb usb1: usb auto-resume
[ 342.479449] ehci_hcd 0000:00:04.1: resume root hub
[ 342.520022] hub 1-0:1.0: hub_resume
[ 342.520069] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 344.704033] hub 1-0:1.0: hub_suspend
[ 344.704053] usb usb1: bus auto-suspend
[ 344.704060] ehci_hcd 0000:00:04.1: suspend root hub
[ 357.704211] usb 2-6: usb auto-suspend
[ 360.704043] hub 2-0:1.0: hub_suspend
[ 360.704066] usb usb2: bus auto-suspend
[ 360.704074] ehci_hcd 0000:00:06.1: suspend root hub
[ 372.430686] usb usb2: usb auto-resume
[ 372.430698] ehci_hcd 0000:00:06.1: resume root hub
[ 372.471023] hub 2-0:1.0: hub_resume
[ 372.471061] hub 2-0:1.0: port 6: status 0507 change 0000
[ 372.471089] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 372.471109] usb 2-6: usb auto-resume
[ 372.497036] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 372.508029] usb 2-6: finish resume
[ 372.508450] usb usb1: usb auto-resume
[ 372.508459] ehci_hcd 0000:00:04.1: resume root hub
[ 372.549022] hub 1-0:1.0: hub_resume
[ 372.549068] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 374.704034] hub 1-0:1.0: hub_suspend
[ 374.704054] usb usb1: bus auto-suspend
[ 374.704060] ehci_hcd 0000:00:04.1: suspend root hub
[ 387.704226] usb 2-6: usb auto-suspend
[ 390.704045] hub 2-0:1.0: hub_suspend
[ 390.704065] usb usb2: bus auto-suspend
[ 390.704072] ehci_hcd 0000:00:06.1: suspend root hub
[ 402.431684] usb usb2: usb auto-resume
[ 402.431696] ehci_hcd 0000:00:06.1: resume root hub
[ 402.472023] hub 2-0:1.0: hub_resume
[ 402.472060] hub 2-0:1.0: port 6: status 0507 change 0000
[ 402.472083] usb 2-6: usb auto-resume
[ 402.472102] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 402.498036] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 402.509028] usb 2-6: finish resume
[ 402.509456] usb usb1: usb auto-resume
[ 402.509465] ehci_hcd 0000:00:04.1: resume root hub
[ 402.550023] hub 1-0:1.0: hub_resume
[ 402.550068] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 404.704114] hub 1-0:1.0: hub_suspend
[ 404.704148] usb usb1: bus auto-suspend
[ 404.704159] ehci_hcd 0000:00:04.1: suspend root hub
[ 417.704212] usb 2-6: usb auto-suspend
[ 420.704034] hub 2-0:1.0: hub_suspend
[ 420.704054] usb usb2: bus auto-suspend
[ 420.704060] ehci_hcd 0000:00:06.1: suspend root hub
[ 432.431697] usb usb2: usb auto-resume
[ 432.431709] ehci_hcd 0000:00:06.1: resume root hub
[ 432.472023] hub 2-0:1.0: hub_resume
[ 432.472060] hub 2-0:1.0: port 6: status 0507 change 0000
[ 432.472082] usb 2-6: usb auto-resume
[ 432.472102] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 432.498037] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 432.509029] usb 2-6: finish resume
[ 432.509470] usb usb1: usb auto-resume
[ 432.509479] ehci_hcd 0000:00:04.1: resume root hub
[ 432.550022] hub 1-0:1.0: hub_resume
[ 432.550069] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 434.704032] hub 1-0:1.0: hub_suspend
[ 434.704051] usb usb1: bus auto-suspend
[ 434.704058] ehci_hcd 0000:00:04.1: suspend root hub
[ 447.704102] usb 2-6: usb auto-suspend
[ 450.698288] hub 2-0:1.0: hub_suspend
[ 450.698308] usb usb2: bus auto-suspend
[ 450.698315] ehci_hcd 0000:00:06.1: suspend root hub
[ 462.431685] usb usb2: usb auto-resume
[ 462.431697] ehci_hcd 0000:00:06.1: resume root hub
[ 462.472025] hub 2-0:1.0: hub_resume
[ 462.472061] hub 2-0:1.0: port 6: status 0507 change 0000
[ 462.472084] usb 2-6: usb auto-resume
[ 462.472102] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 462.498038] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 462.509029] usb 2-6: finish resume
[ 462.509518] usb usb1: usb auto-resume
[ 462.509527] ehci_hcd 0000:00:04.1: resume root hub
[ 462.550025] hub 1-0:1.0: hub_resume
[ 462.550083] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 464.701161] hub 1-0:1.0: hub_suspend
[ 464.701181] usb usb1: bus auto-suspend
[ 464.701188] ehci_hcd 0000:00:04.1: suspend root hub
[ 477.704083] usb 2-6: usb auto-suspend
[ 480.698286] hub 2-0:1.0: hub_suspend
[ 480.698306] usb usb2: bus auto-suspend
[ 480.698313] ehci_hcd 0000:00:06.1: suspend root hub
[ 492.432682] usb usb2: usb auto-resume
[ 492.432694] ehci_hcd 0000:00:06.1: resume root hub
[ 492.473023] hub 2-0:1.0: hub_resume
[ 492.473060] hub 2-0:1.0: port 6: status 0507 change 0000
[ 492.473082] usb 2-6: usb auto-resume
[ 492.473102] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 492.499037] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 492.510065] usb 2-6: finish resume
[ 492.510665] usb usb1: usb auto-resume
[ 492.510677] ehci_hcd 0000:00:04.1: resume root hub
[ 492.551064] hub 1-0:1.0: hub_resume
[ 492.551165] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 494.704033] hub 1-0:1.0: hub_suspend
[ 494.704055] usb usb1: bus auto-suspend
[ 494.704061] ehci_hcd 0000:00:04.1: suspend root hub
[ 507.698458] usb 2-6: usb auto-suspend
[ 510.698287] hub 2-0:1.0: hub_suspend
[ 510.698306] usb usb2: bus auto-suspend
[ 510.698313] ehci_hcd 0000:00:06.1: suspend root hub
[ 522.432685] usb usb2: usb auto-resume
[ 522.432697] ehci_hcd 0000:00:06.1: resume root hub
[ 522.473028] hub 2-0:1.0: hub_resume
[ 522.473068] hub 2-0:1.0: port 6: status 0507 change 0000
[ 522.473091] usb 2-6: usb auto-resume
[ 522.473110] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 522.499039] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 522.510028] usb 2-6: finish resume
[ 522.510503] usb usb1: usb auto-resume
[ 522.510511] ehci_hcd 0000:00:04.1: resume root hub
[ 522.551023] hub 1-0:1.0: hub_resume
[ 522.551078] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 524.701160] hub 1-0:1.0: hub_suspend
[ 524.701179] usb usb1: bus auto-suspend
[ 524.701186] ehci_hcd 0000:00:04.1: suspend root hub
[ 537.704223] usb 2-6: usb auto-suspend
[ 540.704059] hub 2-0:1.0: hub_suspend
[ 540.704085] usb usb2: bus auto-suspend
[ 540.704095] ehci_hcd 0000:00:06.1: suspend root hub
[ 552.432724] usb usb2: usb auto-resume
[ 552.432735] ehci_hcd 0000:00:06.1: resume root hub
[ 552.473148] hub 2-0:1.0: hub_resume
[ 552.473186] hub 2-0:1.0: port 6: status 0507 change 0000
[ 552.473207] usb 2-6: usb auto-resume
[ 552.473222] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 552.499162] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 552.510160] usb 2-6: finish resume
[ 552.510650] usb usb1: usb auto-resume
[ 552.510659] ehci_hcd 0000:00:04.1: resume root hub
[ 552.551157] hub 1-0:1.0: hub_resume
[ 552.551224] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 554.698301] hub 1-0:1.0: hub_suspend
[ 554.698323] usb usb1: bus auto-suspend
[ 554.698330] ehci_hcd 0000:00:04.1: suspend root hub
[ 567.701263] usb 2-6: usb auto-suspend
[ 570.701157] hub 2-0:1.0: hub_suspend
[ 570.701176] usb usb2: bus auto-suspend
[ 570.701183] ehci_hcd 0000:00:06.1: suspend root hub
[ 582.431814] usb usb2: usb auto-resume
[ 582.431826] ehci_hcd 0000:00:06.1: resume root hub
[ 582.472164] hub 2-0:1.0: hub_resume
[ 582.472216] hub 2-0:1.0: port 6: status 0507 change 0000
[ 582.472252] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 582.472273] usb 2-6: usb auto-resume
[ 582.498173] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 582.509167] usb 2-6: finish resume
[ 582.509640] usb usb1: usb auto-resume
[ 582.509649] ehci_hcd 0000:00:04.1: resume root hub
[ 582.550177] hub 1-0:1.0: hub_resume
[ 582.550255] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 584.701157] hub 1-0:1.0: hub_suspend
[ 584.701177] usb usb1: bus auto-suspend
[ 584.701184] ehci_hcd 0000:00:04.1: suspend root hub
[ 597.701306] usb 2-6: usb auto-suspend
[ 600.701177] hub 2-0:1.0: hub_suspend
[ 600.701199] usb usb2: bus auto-suspend
[ 600.701207] ehci_hcd 0000:00:06.1: suspend root hub
[ 612.433084] usb usb2: usb auto-resume
[ 612.433103] ehci_hcd 0000:00:06.1: resume root hub
[ 612.474295] hub 2-0:1.0: hub_resume
[ 612.474348] hub 2-0:1.0: port 6: status 0507 change 0000
[ 612.474382] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 612.474404] usb 2-6: usb auto-resume
[ 612.500326] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 612.511293] usb 2-6: finish resume
[ 612.511812] usb usb1: usb auto-resume
[ 612.511821] ehci_hcd 0000:00:04.1: resume root hub
[ 612.552281] hub 1-0:1.0: hub_resume
[ 612.552359] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 614.698290] hub 1-0:1.0: hub_suspend
[ 614.698310] usb usb1: bus auto-suspend
[ 614.698317] ehci_hcd 0000:00:04.1: suspend root hub
[ 627.698462] usb 2-6: usb auto-suspend
[ 630.701155] hub 2-0:1.0: hub_suspend
[ 630.701174] usb usb2: bus auto-suspend
[ 630.701181] ehci_hcd 0000:00:06.1: suspend root hub
[ 642.432019] usb usb2: usb auto-resume
[ 642.432035] ehci_hcd 0000:00:06.1: resume root hub
[ 642.473274] hub 2-0:1.0: hub_resume
[ 642.473317] hub 2-0:1.0: port 6: status 0507 change 0000
[ 642.473340] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 642.473348] usb 2-6: usb auto-resume
[ 642.499289] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 642.510281] usb 2-6: finish resume
[ 642.510838] usb usb1: usb auto-resume
[ 642.510848] ehci_hcd 0000:00:04.1: resume root hub
[ 642.551275] hub 1-0:1.0: hub_resume
[ 642.551326] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 644.698291] hub 1-0:1.0: hub_suspend
[ 644.698311] usb usb1: bus auto-suspend
[ 644.698318] ehci_hcd 0000:00:04.1: suspend root hub
[ 657.698398] usb 2-6: usb auto-suspend
[ 660.701158] hub 2-0:1.0: hub_suspend
[ 660.701178] usb usb2: bus auto-suspend
[ 660.701185] ehci_hcd 0000:00:06.1: suspend root hub
[ 672.431940] usb usb2: usb auto-resume
[ 672.431951] ehci_hcd 0000:00:06.1: resume root hub
[ 672.472273] hub 2-0:1.0: hub_resume
[ 672.472311] hub 2-0:1.0: port 6: status 0507 change 0000
[ 672.472331] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 672.472338] usb 2-6: usb auto-resume
[ 672.498286] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 672.509278] usb 2-6: finish resume
[ 672.509725] usb usb1: usb auto-resume
[ 672.509733] ehci_hcd 0000:00:04.1: resume root hub
[ 672.550271] hub 1-0:1.0: hub_resume
[ 672.550315] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 674.698289] hub 1-0:1.0: hub_suspend
[ 674.698308] usb usb1: bus auto-suspend
[ 674.698315] ehci_hcd 0000:00:04.1: suspend root hub
[ 687.698438] usb 2-6: usb auto-suspend
[ 690.701157] hub 2-0:1.0: hub_suspend
[ 690.701177] usb usb2: bus auto-suspend
[ 690.701184] ehci_hcd 0000:00:06.1: suspend root hub
[ 702.432064] usb usb2: usb auto-resume
[ 702.432076] ehci_hcd 0000:00:06.1: resume root hub
[ 702.473276] hub 2-0:1.0: hub_resume
[ 702.473316] hub 2-0:1.0: port 6: status 0507 change 0000
[ 702.473337] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 702.473345] usb 2-6: usb auto-resume
[ 702.499301] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 702.510293] usb 2-6: finish resume
[ 702.510759] usb usb1: usb auto-resume
[ 702.510768] ehci_hcd 0000:00:04.1: resume root hub
[ 702.551280] hub 1-0:1.0: hub_resume
[ 702.551334] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 704.698290] hub 1-0:1.0: hub_suspend
[ 704.698311] usb usb1: bus auto-suspend
[ 704.698318] ehci_hcd 0000:00:04.1: suspend root hub
[ 717.698438] usb 2-6: usb auto-suspend
[ 720.701166] hub 2-0:1.0: hub_suspend
[ 720.701185] usb usb2: bus auto-suspend
[ 720.701192] ehci_hcd 0000:00:06.1: suspend root hub
[ 732.431932] usb usb2: usb auto-resume
[ 732.431943] ehci_hcd 0000:00:06.1: resume root hub
[ 732.472278] hub 2-0:1.0: hub_resume
[ 732.472318] hub 2-0:1.0: port 6: status 0507 change 0000
[ 732.472338] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 732.472346] usb 2-6: usb auto-resume
[ 732.498289] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 732.509279] usb 2-6: finish resume
[ 732.509745] usb usb1: usb auto-resume
[ 732.509754] ehci_hcd 0000:00:04.1: resume root hub
[ 732.550279] hub 1-0:1.0: hub_resume
[ 732.550333] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 734.698292] hub 1-0:1.0: hub_suspend
[ 734.698312] usb usb1: bus auto-suspend
[ 734.698319] ehci_hcd 0000:00:04.1: suspend root hub
[ 747.698436] usb 2-6: usb auto-suspend
[ 750.701158] hub 2-0:1.0: hub_suspend
[ 750.701177] usb usb2: bus auto-suspend
[ 750.701184] ehci_hcd 0000:00:06.1: suspend root hub
[ 762.432977] usb usb2: usb auto-resume
[ 762.432990] ehci_hcd 0000:00:06.1: resume root hub
[ 762.473277] hub 2-0:1.0: hub_resume
[ 762.473317] hub 2-0:1.0: port 6: status 0507 change 0000
[ 762.473337] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 762.473345] usb 2-6: usb auto-resume
[ 762.499295] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 762.510292] usb 2-6: finish resume
[ 762.510817] usb usb1: usb auto-resume
[ 762.510828] ehci_hcd 0000:00:04.1: resume root hub
[ 762.551276] hub 1-0:1.0: hub_resume
[ 762.551326] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 764.698289] hub 1-0:1.0: hub_suspend
[ 764.698309] usb usb1: bus auto-suspend
[ 764.698315] ehci_hcd 0000:00:04.1: suspend root hub
[ 777.698478] usb 2-6: usb auto-suspend
[ 780.701181] hub 2-0:1.0: hub_suspend
[ 780.701200] usb usb2: bus auto-suspend
[ 780.701207] ehci_hcd 0000:00:06.1: suspend root hub
[ 792.432264] usb usb2: usb auto-resume
[ 792.432275] ehci_hcd 0000:00:06.1: resume root hub
[ 792.473396] hub 2-0:1.0: hub_resume
[ 792.473434] hub 2-0:1.0: port 6: status 0507 change 0000
[ 792.473456] usb 2-6: usb auto-resume
[ 792.473475] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 792.499409] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 792.510445] usb 2-6: finish resume
[ 792.511079] usb usb1: usb auto-resume
[ 792.511094] ehci_hcd 0000:00:04.1: resume root hub
[ 792.552152] hub 1-0:1.0: hub_resume
[ 792.552220] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 794.701157] hub 1-0:1.0: hub_suspend
[ 794.701177] usb usb1: bus auto-suspend
[ 794.701184] ehci_hcd 0000:00:04.1: suspend root hub
[ 807.701267] usb 2-6: usb auto-suspend
[ 810.701157] hub 2-0:1.0: hub_suspend
[ 810.701177] usb usb2: bus auto-suspend
[ 810.701184] ehci_hcd 0000:00:06.1: suspend root hub
[ 822.432054] usb usb2: usb auto-resume
[ 822.432066] ehci_hcd 0000:00:06.1: resume root hub
[ 822.473152] hub 2-0:1.0: hub_resume
[ 822.473192] hub 2-0:1.0: port 6: status 0507 change 0000
[ 822.473215] usb 2-6: usb auto-resume
[ 822.473234] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 822.499175] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 822.510154] usb 2-6: finish resume
[ 822.510629] usb usb1: usb auto-resume
[ 822.510637] ehci_hcd 0000:00:04.1: resume root hub
[ 822.551160] hub 1-0:1.0: hub_resume
[ 822.551224] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 824.701157] hub 1-0:1.0: hub_suspend
[ 824.701177] usb usb1: bus auto-suspend
[ 824.701184] ehci_hcd 0000:00:04.1: suspend root hub
[ 837.701307] usb 2-6: usb auto-suspend
[ 840.701158] hub 2-0:1.0: hub_suspend
[ 840.701178] usb usb2: bus auto-suspend
[ 840.701185] ehci_hcd 0000:00:06.1: suspend root hub
[ 852.431838] usb usb2: usb auto-resume
[ 852.431850] ehci_hcd 0000:00:06.1: resume root hub
[ 852.472160] hub 2-0:1.0: hub_resume
[ 852.472201] hub 2-0:1.0: port 6: status 0507 change 0000
[ 852.472225] usb 2-6: usb auto-resume
[ 852.472244] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 852.498170] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 852.509152] usb 2-6: finish resume
[ 852.509658] usb usb1: usb auto-resume
[ 852.509667] ehci_hcd 0000:00:04.1: resume root hub
[ 852.550154] hub 1-0:1.0: hub_resume
[ 852.550218] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 854.701155] hub 1-0:1.0: hub_suspend
[ 854.701175] usb usb1: bus auto-suspend
[ 854.701182] ehci_hcd 0000:00:04.1: suspend root hub
[ 867.701335] usb 2-6: usb auto-suspend
[ 870.704032] hub 2-0:1.0: hub_suspend
[ 870.704053] usb usb2: bus auto-suspend
[ 870.704059] ehci_hcd 0000:00:06.1: suspend root hub
[ 882.431822] usb usb2: usb auto-resume
[ 882.431833] ehci_hcd 0000:00:06.1: resume root hub
[ 882.472147] hub 2-0:1.0: hub_resume
[ 882.472185] hub 2-0:1.0: port 6: status 0507 change 0000
[ 882.472207] usb 2-6: usb auto-resume
[ 882.472226] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 882.498161] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 882.509152] usb 2-6: finish resume
[ 882.509594] usb usb1: usb auto-resume
[ 882.509602] ehci_hcd 0000:00:04.1: resume root hub
[ 882.550146] hub 1-0:1.0: hub_resume
[ 882.550198] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 884.698286] hub 1-0:1.0: hub_suspend
[ 884.698307] usb usb1: bus auto-suspend
[ 884.698314] ehci_hcd 0000:00:04.1: suspend root hub
[ 897.701269] usb 2-6: usb auto-suspend
[ 900.704038] hub 2-0:1.0: hub_suspend
[ 900.704058] usb usb2: bus auto-suspend
[ 900.704065] ehci_hcd 0000:00:06.1: suspend root hub
[ 912.431804] usb usb2: usb auto-resume
[ 912.431815] ehci_hcd 0000:00:06.1: resume root hub
[ 912.472148] hub 2-0:1.0: hub_resume
[ 912.472186] hub 2-0:1.0: port 6: status 0507 change 0000
[ 912.472208] usb 2-6: usb auto-resume
[ 912.472226] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 912.498161] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 912.509153] usb 2-6: finish resume
[ 912.509582] usb usb1: usb auto-resume
[ 912.509590] ehci_hcd 0000:00:04.1: resume root hub
[ 912.550148] hub 1-0:1.0: hub_resume
[ 912.550203] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 914.698289] hub 1-0:1.0: hub_suspend
[ 914.698311] usb usb1: bus auto-suspend
[ 914.698318] ehci_hcd 0000:00:04.1: suspend root hub
[ 927.701256] usb 2-6: usb auto-suspend
[ 930.704033] hub 2-0:1.0: hub_suspend
[ 930.704052] usb usb2: bus auto-suspend
[ 930.704059] ehci_hcd 0000:00:06.1: suspend root hub
[ 942.431804] usb usb2: usb auto-resume
[ 942.431815] ehci_hcd 0000:00:06.1: resume root hub
[ 942.472150] hub 2-0:1.0: hub_resume
[ 942.472189] hub 2-0:1.0: port 6: status 0507 change 0000
[ 942.472213] usb 2-6: usb auto-resume
[ 942.472232] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 942.498174] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 942.509160] usb 2-6: finish resume
[ 942.509626] usb usb1: usb auto-resume
[ 942.509635] ehci_hcd 0000:00:04.1: resume root hub
[ 942.550148] hub 1-0:1.0: hub_resume
[ 942.550207] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 944.698290] hub 1-0:1.0: hub_suspend
[ 944.698311] usb usb1: bus auto-suspend
[ 944.698318] ehci_hcd 0000:00:04.1: suspend root hub
[ 957.701260] usb 2-6: usb auto-suspend
[ 960.704033] hub 2-0:1.0: hub_suspend
[ 960.704053] usb usb2: bus auto-suspend
[ 960.704060] ehci_hcd 0000:00:06.1: suspend root hub
[ 972.431853] usb usb2: usb auto-resume
[ 972.431865] ehci_hcd 0000:00:06.1: resume root hub
[ 972.472147] hub 2-0:1.0: hub_resume
[ 972.472185] hub 2-0:1.0: port 6: status 0507 change 0000
[ 972.472206] usb 2-6: usb auto-resume
[ 972.472225] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 972.498172] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 972.509154] usb 2-6: finish resume
[ 972.509660] usb usb1: usb auto-resume
[ 972.509668] ehci_hcd 0000:00:04.1: resume root hub
[ 972.550147] hub 1-0:1.0: hub_resume
[ 972.550204] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 974.698304] hub 1-0:1.0: hub_suspend
[ 974.698326] usb usb1: bus auto-suspend
[ 974.698333] ehci_hcd 0000:00:04.1: suspend root hub
[ 987.701317] usb 2-6: usb auto-suspend
[ 990.704043] hub 2-0:1.0: hub_suspend
[ 990.704065] usb usb2: bus auto-suspend
[ 990.704072] ehci_hcd 0000:00:06.1: suspend root hub
[ 1002.432810] usb usb2: usb auto-resume
[ 1002.432821] ehci_hcd 0000:00:06.1: resume root hub
[ 1002.473157] hub 2-0:1.0: hub_resume
[ 1002.473197] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1002.473221] usb 2-6: usb auto-resume
[ 1002.473240] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1002.499187] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1002.510169] usb 2-6: finish resume
[ 1002.510639] usb usb1: usb auto-resume
[ 1002.510649] ehci_hcd 0000:00:04.1: resume root hub
[ 1002.551038] hub 1-0:1.0: hub_resume
[ 1002.551105] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1004.704043] hub 1-0:1.0: hub_suspend
[ 1004.704063] usb usb1: bus auto-suspend
[ 1004.704070] ehci_hcd 0000:00:04.1: suspend root hub
[ 1017.701301] usb 2-6: usb auto-suspend
[ 1020.704072] hub 2-0:1.0: hub_suspend
[ 1020.704098] usb usb2: bus auto-suspend
[ 1020.704108] ehci_hcd 0000:00:06.1: suspend root hub
[ 1032.431664] usb usb2: usb auto-resume
[ 1032.431675] ehci_hcd 0000:00:06.1: resume root hub
[ 1032.472032] hub 2-0:1.0: hub_resume
[ 1032.472073] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1032.472095] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1032.472102] usb 2-6: usb auto-resume
[ 1032.498052] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1032.509086] usb 2-6: finish resume
[ 1032.509611] usb usb1: usb auto-resume
[ 1032.509620] ehci_hcd 0000:00:04.1: resume root hub
[ 1032.550032] hub 1-0:1.0: hub_resume
[ 1032.550088] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1034.704034] hub 1-0:1.0: hub_suspend
[ 1034.704054] usb usb1: bus auto-suspend
[ 1034.704061] ehci_hcd 0000:00:04.1: suspend root hub
[ 1047.704280] usb 2-6: usb auto-suspend
[ 1050.704033] hub 2-0:1.0: hub_suspend
[ 1050.704053] usb usb2: bus auto-suspend
[ 1050.704059] ehci_hcd 0000:00:06.1: suspend root hub
[ 1062.431689] usb usb2: usb auto-resume
[ 1062.431700] ehci_hcd 0000:00:06.1: resume root hub
[ 1062.472026] hub 2-0:1.0: hub_resume
[ 1062.472062] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1062.472082] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1062.472090] usb 2-6: usb auto-resume
[ 1062.498055] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1062.509042] usb 2-6: finish resume
[ 1062.509513] usb usb1: usb auto-resume
[ 1062.509522] ehci_hcd 0000:00:04.1: resume root hub
[ 1062.550032] hub 1-0:1.0: hub_resume
[ 1062.550085] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1064.704045] hub 1-0:1.0: hub_suspend
[ 1064.704069] usb usb1: bus auto-suspend
[ 1064.704076] ehci_hcd 0000:00:04.1: suspend root hub
[ 1077.704163] usb 2-6: usb auto-suspend
[ 1080.698288] hub 2-0:1.0: hub_suspend
[ 1080.698308] usb usb2: bus auto-suspend
[ 1080.698315] ehci_hcd 0000:00:06.1: suspend root hub
[ 1092.431704] usb usb2: usb auto-resume
[ 1092.431715] ehci_hcd 0000:00:06.1: resume root hub
[ 1092.472033] hub 2-0:1.0: hub_resume
[ 1092.472074] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1092.472095] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1092.472102] usb 2-6: usb auto-resume
[ 1092.498052] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1092.509029] usb 2-6: finish resume
[ 1092.509524] usb usb1: usb auto-resume
[ 1092.509533] ehci_hcd 0000:00:04.1: resume root hub
[ 1092.550027] hub 1-0:1.0: hub_resume
[ 1092.550080] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1094.704034] hub 1-0:1.0: hub_suspend
[ 1094.704055] usb usb1: bus auto-suspend
[ 1094.704062] ehci_hcd 0000:00:04.1: suspend root hub
[ 1107.704184] usb 2-6: usb auto-suspend
[ 1110.698285] hub 2-0:1.0: hub_suspend
[ 1110.698304] usb usb2: bus auto-suspend
[ 1110.698311] ehci_hcd 0000:00:06.1: suspend root hub
[ 1122.431686] usb usb2: usb auto-resume
[ 1122.431697] ehci_hcd 0000:00:06.1: resume root hub
[ 1122.472152] hub 2-0:1.0: hub_resume
[ 1122.472194] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1122.472217] usb 2-6: usb auto-resume
[ 1122.472236] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1122.498162] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1122.509152] usb 2-6: finish resume
[ 1122.509633] usb usb1: usb auto-resume
[ 1122.509642] ehci_hcd 0000:00:04.1: resume root hub
[ 1122.550146] hub 1-0:1.0: hub_resume
[ 1122.550202] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1124.698288] hub 1-0:1.0: hub_suspend
[ 1124.698309] usb usb1: bus auto-suspend
[ 1124.698315] ehci_hcd 0000:00:04.1: suspend root hub
[ 1137.701296] usb 2-6: usb auto-suspend
[ 1140.698288] hub 2-0:1.0: hub_suspend
[ 1140.698307] usb usb2: bus auto-suspend
[ 1140.698314] ehci_hcd 0000:00:06.1: suspend root hub
[ 1152.432200] usb usb2: usb auto-resume
[ 1152.432212] ehci_hcd 0000:00:06.1: resume root hub
[ 1152.473159] hub 2-0:1.0: hub_resume
[ 1152.473200] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1152.473223] usb 2-6: usb auto-resume
[ 1152.473242] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1152.499173] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1152.510163] usb 2-6: finish resume
[ 1152.510645] usb usb1: usb auto-resume
[ 1152.510655] ehci_hcd 0000:00:04.1: resume root hub
[ 1152.551154] hub 1-0:1.0: hub_resume
[ 1152.551217] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1154.698289] hub 1-0:1.0: hub_suspend
[ 1154.698310] usb usb1: bus auto-suspend
[ 1154.698317] ehci_hcd 0000:00:04.1: suspend root hub
[ 1167.701330] usb 2-6: usb auto-suspend
[ 1170.701157] hub 2-0:1.0: hub_suspend
[ 1170.701176] usb usb2: bus auto-suspend
[ 1170.701183] ehci_hcd 0000:00:06.1: suspend root hub
[ 1182.431935] usb usb2: usb auto-resume
[ 1182.431947] ehci_hcd 0000:00:06.1: resume root hub
[ 1182.472279] hub 2-0:1.0: hub_resume
[ 1182.472321] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1182.472343] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1182.472350] usb 2-6: usb auto-resume
[ 1182.498294] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1182.509290] usb 2-6: finish resume
[ 1182.509751] usb usb1: usb auto-resume
[ 1182.509760] ehci_hcd 0000:00:04.1: resume root hub
[ 1182.550280] hub 1-0:1.0: hub_resume
[ 1182.550333] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1184.698290] hub 1-0:1.0: hub_suspend
[ 1184.698311] usb usb1: bus auto-suspend
[ 1184.698318] ehci_hcd 0000:00:04.1: suspend root hub
[ 1197.698438] usb 2-6: usb auto-suspend
[ 1200.701168] hub 2-0:1.0: hub_suspend
[ 1200.701188] usb usb2: bus auto-suspend
[ 1200.701195] ehci_hcd 0000:00:06.1: suspend root hub
[ 1212.432134] usb usb2: usb auto-resume
[ 1212.432146] ehci_hcd 0000:00:06.1: resume root hub
[ 1212.473284] hub 2-0:1.0: hub_resume
[ 1212.473332] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1212.473356] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1212.473364] usb 2-6: usb auto-resume
[ 1212.499300] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1212.510279] usb 2-6: finish resume
[ 1212.510863] usb usb1: usb auto-resume
[ 1212.510872] ehci_hcd 0000:00:04.1: resume root hub
[ 1212.551280] hub 1-0:1.0: hub_resume
[ 1212.551334] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1214.698290] hub 1-0:1.0: hub_suspend
[ 1214.698310] usb usb1: bus auto-suspend
[ 1214.698317] ehci_hcd 0000:00:04.1: suspend root hub
[ 1227.698396] usb 2-6: usb auto-suspend
[ 1230.701175] hub 2-0:1.0: hub_suspend
[ 1230.701200] usb usb2: bus auto-suspend
[ 1230.701210] ehci_hcd 0000:00:06.1: suspend root hub
[ 1242.432007] usb usb2: usb auto-resume
[ 1242.432020] ehci_hcd 0000:00:06.1: resume root hub
[ 1242.473405] hub 2-0:1.0: hub_resume
[ 1242.473445] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1242.473469] usb 2-6: usb auto-resume
[ 1242.473488] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1242.499438] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1242.510420] usb 2-6: finish resume
[ 1242.510959] usb usb1: usb auto-resume
[ 1242.510969] ehci_hcd 0000:00:04.1: resume root hub
[ 1242.551157] hub 1-0:1.0: hub_resume
[ 1242.551224] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1244.701157] hub 1-0:1.0: hub_suspend
[ 1244.701178] usb usb1: bus auto-suspend
[ 1244.701185] ehci_hcd 0000:00:04.1: suspend root hub
[ 1257.695516] usb 2-6: usb auto-suspend
[ 1260.701173] hub 2-0:1.0: hub_suspend
[ 1260.701193] usb usb2: bus auto-suspend
[ 1260.701200] ehci_hcd 0000:00:06.1: suspend root hub
[ 1272.432200] usb usb2: usb auto-resume
[ 1272.432211] ehci_hcd 0000:00:06.1: resume root hub
[ 1272.473147] hub 2-0:1.0: hub_resume
[ 1272.473185] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1272.473207] usb 2-6: usb auto-resume
[ 1272.473227] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1272.499160] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1272.510152] usb 2-6: finish resume
[ 1272.510594] usb usb1: usb auto-resume
[ 1272.510603] ehci_hcd 0000:00:04.1: resume root hub
[ 1272.551030] hub 1-0:1.0: hub_resume
[ 1272.551101] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1274.704036] hub 1-0:1.0: hub_suspend
[ 1274.704056] usb usb1: bus auto-suspend
[ 1274.704063] ehci_hcd 0000:00:04.1: suspend root hub
[ 1287.701334] usb 2-6: usb auto-suspend
[ 1290.698291] hub 2-0:1.0: hub_suspend
[ 1290.698311] usb usb2: bus auto-suspend
[ 1290.698318] ehci_hcd 0000:00:06.1: suspend root hub
[ 1302.432685] usb usb2: usb auto-resume
[ 1302.432696] ehci_hcd 0000:00:06.1: resume root hub
[ 1302.473029] hub 2-0:1.0: hub_resume
[ 1302.473069] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1302.473093] usb 2-6: usb auto-resume
[ 1302.473112] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1302.499047] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1302.510044] usb 2-6: finish resume
[ 1302.510510] usb usb1: usb auto-resume
[ 1302.510519] ehci_hcd 0000:00:04.1: resume root hub
[ 1302.551031] hub 1-0:1.0: hub_resume
[ 1302.551086] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1304.701161] hub 1-0:1.0: hub_suspend
[ 1304.701180] usb usb1: bus auto-suspend
[ 1304.701187] ehci_hcd 0000:00:04.1: suspend root hub
[ 1317.704193] usb 2-6: usb auto-suspend
[ 1320.698289] hub 2-0:1.0: hub_suspend
[ 1320.698308] usb usb2: bus auto-suspend
[ 1320.698315] ehci_hcd 0000:00:06.1: suspend root hub
[ 1332.432198] usb usb2: usb auto-resume
[ 1332.432210] ehci_hcd 0000:00:06.1: resume root hub
[ 1332.473029] hub 2-0:1.0: hub_resume
[ 1332.473067] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1332.473090] usb 2-6: usb auto-resume
[ 1332.473109] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1332.499049] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1332.510040] usb 2-6: finish resume
[ 1332.510525] usb usb1: usb auto-resume
[ 1332.510535] ehci_hcd 0000:00:04.1: resume root hub
[ 1332.551029] hub 1-0:1.0: hub_resume
[ 1332.551091] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1334.701162] hub 1-0:1.0: hub_suspend
[ 1334.701184] usb usb1: bus auto-suspend
[ 1334.701190] ehci_hcd 0000:00:04.1: suspend root hub
[ 1347.704218] usb 2-6: usb auto-suspend
[ 1350.698292] hub 2-0:1.0: hub_suspend
[ 1350.698313] usb usb2: bus auto-suspend
[ 1350.698320] ehci_hcd 0000:00:06.1: suspend root hub
[ 1362.432192] usb usb2: usb auto-resume
[ 1362.432204] ehci_hcd 0000:00:06.1: resume root hub
[ 1362.473146] hub 2-0:1.0: hub_resume
[ 1362.473184] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1362.473206] usb 2-6: usb auto-resume
[ 1362.473225] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1362.499160] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1362.510152] usb 2-6: finish resume
[ 1362.510587] usb usb1: usb auto-resume
[ 1362.510596] ehci_hcd 0000:00:04.1: resume root hub
[ 1362.551146] hub 1-0:1.0: hub_resume
[ 1362.551200] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1364.704043] hub 1-0:1.0: hub_suspend
[ 1364.704064] usb usb1: bus auto-suspend
[ 1364.704071] ehci_hcd 0000:00:04.1: suspend root hub
[ 1377.701346] usb 2-6: usb auto-suspend
[ 1380.704034] hub 2-0:1.0: hub_suspend
[ 1380.704053] usb usb2: bus auto-suspend
[ 1380.704060] ehci_hcd 0000:00:06.1: suspend root hub
[ 1392.432802] usb usb2: usb auto-resume
[ 1392.432814] ehci_hcd 0000:00:06.1: resume root hub
[ 1392.473155] hub 2-0:1.0: hub_resume
[ 1392.473197] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1392.473226] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1392.473245] usb 2-6: usb auto-resume
[ 1392.499176] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1392.510183] usb 2-6: finish resume
[ 1392.510749] usb usb1: usb auto-resume
[ 1392.510758] ehci_hcd 0000:00:04.1: resume root hub
[ 1392.551042] hub 1-0:1.0: hub_resume
[ 1392.551106] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1394.704051] hub 1-0:1.0: hub_suspend
[ 1394.704071] usb usb1: bus auto-suspend
[ 1394.704078] ehci_hcd 0000:00:04.1: suspend root hub
[ 1407.704130] usb 2-6: usb auto-suspend
[ 1410.704073] hub 2-0:1.0: hub_suspend
[ 1410.704097] usb usb2: bus auto-suspend
[ 1410.704105] ehci_hcd 0000:00:06.1: suspend root hub
[ 1422.431832] usb usb2: usb auto-resume
[ 1422.431843] ehci_hcd 0000:00:06.1: resume root hub
[ 1422.472024] hub 2-0:1.0: hub_resume
[ 1422.472061] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1422.472084] usb 2-6: usb auto-resume
[ 1422.472103] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1422.498036] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1422.509029] usb 2-6: finish resume
[ 1422.509478] usb usb1: usb auto-resume
[ 1422.509487] ehci_hcd 0000:00:04.1: resume root hub
[ 1422.550025] hub 1-0:1.0: hub_resume
[ 1422.550083] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1424.701160] hub 1-0:1.0: hub_suspend
[ 1424.701180] usb usb1: bus auto-suspend
[ 1424.701187] ehci_hcd 0000:00:04.1: suspend root hub
[ 1437.704151] usb 2-6: usb auto-suspend
[ 1440.704036] hub 2-0:1.0: hub_suspend
[ 1440.704055] usb usb2: bus auto-suspend
[ 1440.704062] ehci_hcd 0000:00:06.1: suspend root hub
[ 1452.431814] usb usb2: usb auto-resume
[ 1452.431825] ehci_hcd 0000:00:06.1: resume root hub
[ 1452.472152] hub 2-0:1.0: hub_resume
[ 1452.472193] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1452.472222] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1452.472242] usb 2-6: usb auto-resume
[ 1452.498169] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1452.509164] usb 2-6: finish resume
[ 1452.509637] usb usb1: usb auto-resume
[ 1452.509646] ehci_hcd 0000:00:04.1: resume root hub
[ 1452.550152] hub 1-0:1.0: hub_resume
[ 1452.550213] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1454.704046] hub 1-0:1.0: hub_suspend
[ 1454.704066] usb usb1: bus auto-suspend
[ 1454.704073] ehci_hcd 0000:00:04.1: suspend root hub
[ 1467.701278] usb 2-6: usb auto-suspend
[ 1470.701157] hub 2-0:1.0: hub_suspend
[ 1470.701177] usb usb2: bus auto-suspend
[ 1470.701184] ehci_hcd 0000:00:06.1: suspend root hub
[ 1482.431811] usb usb2: usb auto-resume
[ 1482.431823] ehci_hcd 0000:00:06.1: resume root hub
[ 1482.472028] hub 2-0:1.0: hub_resume
[ 1482.472065] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1482.472096] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1482.472115] usb 2-6: usb auto-resume
[ 1482.498053] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1482.509040] usb 2-6: finish resume
[ 1482.509510] usb usb1: usb auto-resume
[ 1482.509519] ehci_hcd 0000:00:04.1: resume root hub
[ 1482.550031] hub 1-0:1.0: hub_resume
[ 1482.550087] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1484.704039] hub 1-0:1.0: hub_suspend
[ 1484.704059] usb usb1: bus auto-suspend
[ 1484.704066] ehci_hcd 0000:00:04.1: suspend root hub
[ 1497.704227] usb 2-6: usb auto-suspend
[ 1500.701168] hub 2-0:1.0: hub_suspend
[ 1500.701188] usb usb2: bus auto-suspend
[ 1500.701195] ehci_hcd 0000:00:06.1: suspend root hub
[ 1512.431824] usb usb2: usb auto-resume
[ 1512.431835] ehci_hcd 0000:00:06.1: resume root hub
[ 1512.472025] hub 2-0:1.0: hub_resume
[ 1512.472063] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1512.472085] usb 2-6: usb auto-resume
[ 1512.472104] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1512.498038] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1512.509038] usb 2-6: finish resume
[ 1512.509515] usb usb1: usb auto-resume
[ 1512.509524] ehci_hcd 0000:00:04.1: resume root hub
[ 1512.550037] hub 1-0:1.0: hub_resume
[ 1512.550108] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1514.698300] hub 1-0:1.0: hub_suspend
[ 1514.698322] usb usb1: bus auto-suspend
[ 1514.698329] ehci_hcd 0000:00:04.1: suspend root hub
[ 1527.704123] usb 2-6: usb auto-suspend
[ 1530.701174] hub 2-0:1.0: hub_suspend
[ 1530.701194] usb usb2: bus auto-suspend
[ 1530.701201] ehci_hcd 0000:00:06.1: suspend root hub
[ 1542.432350] usb usb2: usb auto-resume
[ 1542.432362] ehci_hcd 0000:00:06.1: resume root hub
[ 1542.473284] hub 2-0:1.0: hub_resume
[ 1542.473326] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1542.473347] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1542.473355] usb 2-6: usb auto-resume
[ 1542.499297] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1542.510279] usb 2-6: finish resume
[ 1542.510793] usb usb1: usb auto-resume
[ 1542.510802] ehci_hcd 0000:00:04.1: resume root hub
[ 1542.551277] hub 1-0:1.0: hub_resume
[ 1542.551331] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1544.698289] hub 1-0:1.0: hub_suspend
[ 1544.698310] usb usb1: bus auto-suspend
[ 1544.698317] ehci_hcd 0000:00:04.1: suspend root hub
[ 1557.698382] usb 2-6: usb auto-suspend
[ 1560.704033] hub 2-0:1.0: hub_suspend
[ 1560.704052] usb usb2: bus auto-suspend
[ 1560.704058] ehci_hcd 0000:00:06.1: suspend root hub
[ 1572.431925] usb usb2: usb auto-resume
[ 1572.431936] ehci_hcd 0000:00:06.1: resume root hub
[ 1572.472281] hub 2-0:1.0: hub_resume
[ 1572.472322] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1572.472342] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1572.472350] usb 2-6: usb auto-resume
[ 1572.498301] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1572.509279] usb 2-6: finish resume
[ 1572.509741] usb usb1: usb auto-resume
[ 1572.509750] ehci_hcd 0000:00:04.1: resume root hub
[ 1572.550154] hub 1-0:1.0: hub_resume
[ 1572.550219] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1574.701161] hub 1-0:1.0: hub_suspend
[ 1574.701181] usb usb1: bus auto-suspend
[ 1574.701188] ehci_hcd 0000:00:04.1: suspend root hub
[ 1587.698468] usb 2-6: usb auto-suspend
[ 1590.704034] hub 2-0:1.0: hub_suspend
[ 1590.704053] usb usb2: bus auto-suspend
[ 1590.704060] ehci_hcd 0000:00:06.1: suspend root hub
[ 1602.431804] usb usb2: usb auto-resume
[ 1602.431815] ehci_hcd 0000:00:06.1: resume root hub
[ 1602.472152] hub 2-0:1.0: hub_resume
[ 1602.472191] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1602.472221] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1602.472241] usb 2-6: usb auto-resume
[ 1602.498172] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1602.509153] usb 2-6: finish resume
[ 1602.509623] usb usb1: usb auto-resume
[ 1602.509632] ehci_hcd 0000:00:04.1: resume root hub
[ 1602.550152] hub 1-0:1.0: hub_resume
[ 1602.550209] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1604.701158] hub 1-0:1.0: hub_suspend
[ 1604.701178] usb usb1: bus auto-suspend
[ 1604.701185] ehci_hcd 0000:00:04.1: suspend root hub
[ 1617.701233] usb 2-6: usb auto-suspend
[ 1620.704055] hub 2-0:1.0: hub_suspend
[ 1620.704088] usb usb2: bus auto-suspend
[ 1620.704099] ehci_hcd 0000:00:06.1: suspend root hub
[ 1632.431810] usb usb2: usb auto-resume
[ 1632.431822] ehci_hcd 0000:00:06.1: resume root hub
[ 1632.472147] hub 2-0:1.0: hub_resume
[ 1632.472184] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1632.472206] usb 2-6: usb auto-resume
[ 1632.472225] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1632.498161] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1632.509152] usb 2-6: finish resume
[ 1632.509579] usb usb1: usb auto-resume
[ 1632.509587] ehci_hcd 0000:00:04.1: resume root hub
[ 1632.550146] hub 1-0:1.0: hub_resume
[ 1632.550199] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1634.704036] hub 1-0:1.0: hub_suspend
[ 1634.704056] usb usb1: bus auto-suspend
[ 1634.704063] ehci_hcd 0000:00:04.1: suspend root hub
[ 1647.701245] usb 2-6: usb auto-suspend
[ 1650.698289] hub 2-0:1.0: hub_suspend
[ 1650.698309] usb usb2: bus auto-suspend
[ 1650.698316] ehci_hcd 0000:00:06.1: suspend root hub
[ 1662.432669] usb usb2: usb auto-resume
[ 1662.432680] ehci_hcd 0000:00:06.1: resume root hub
[ 1662.473280] hub 2-0:1.0: hub_resume
[ 1662.473321] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1662.473341] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1662.473349] usb 2-6: usb auto-resume
[ 1662.499294] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1662.510283] usb 2-6: finish resume
[ 1662.510734] usb usb1: usb auto-resume
[ 1662.510742] ehci_hcd 0000:00:04.1: resume root hub
[ 1662.551282] hub 1-0:1.0: hub_resume
[ 1662.551336] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1664.698301] hub 1-0:1.0: hub_suspend
[ 1664.698326] usb usb1: bus auto-suspend
[ 1664.698336] ehci_hcd 0000:00:04.1: suspend root hub
[ 1677.698367] usb 2-6: usb auto-suspend
[ 1680.704035] hub 2-0:1.0: hub_suspend
[ 1680.704054] usb usb2: bus auto-suspend
[ 1680.704062] ehci_hcd 0000:00:06.1: suspend root hub
[ 1692.432321] usb usb2: usb auto-resume
[ 1692.432333] ehci_hcd 0000:00:06.1: resume root hub
[ 1692.473277] hub 2-0:1.0: hub_resume
[ 1692.473317] hub 2-0:1.0: port 6: status 0507 change 0000
[ 1692.473345] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1692.473352] usb 2-6: usb auto-resume
[ 1692.499294] ehci_hcd 0000:00:06.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 1692.510282] usb 2-6: finish resume
[ 1692.510759] usb usb1: usb auto-resume
[ 1692.510768] ehci_hcd 0000:00:04.1: resume root hub
[ 1692.551277] hub 1-0:1.0: hub_resume
[ 1692.551329] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1694.698297] hub 1-0:1.0: hub_suspend
[ 1694.698320] usb usb1: bus auto-suspend
[ 1694.698327] ehci_hcd 0000:00:04.1: suspend root hub