rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-25-server (buildd@crested) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Tue Oct 20 07:20:02 UTC 2009 (Ubuntu 2.6.24-25.63-server)
[ 0.000000] Command line: root=UUID=c8005201-b49c-4704-b80c-6e07fc55f5cc ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097800 (usable)
[ 0.000000] BIOS-e820: 0000000000097800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff70000 (usable)
[ 0.000000] BIOS-e820: 00000000bff70000 - 00000000bff78000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bff78000 - 00000000bff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 151) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 786288) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
[ 0.000000] end_pfn_map = 1310720
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F5E20 checksum 0
[ 0.000000] ACPI: RSDP 000F5E20, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT BFF73326, 003C (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP BFF77E60, 0074 (r1 INTEL LINDHRST 6040000 PTL 3)
[ 0.000000] ACPI: DSDT BFF7377C, 46E4 (r1 Intel LINDHRST 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS BFF78FC0, 0040
[ 0.000000] ACPI: APIC BFF77ED4, 0074 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT BFF77F48, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SPCR BFF77F70, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
[ 0.000000] ACPI: MCFG BFF77FC0, 0040 (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: SSDT BFF73362, 041A (r1 PmRef CpuPm 3000 INTL 20030224)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Entering add_active_range(0, 0, 151) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 786288) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1310720
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 151
[ 0.000000] 0: 256 -> 786288
[ 0.000000] 0: 1048576 -> 1310720
[ 0.000000] On node 0 totalpages: 1048327
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1327 pages reserved
[ 0.000000] DMA zone: 2608 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767912 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, address 0xfec10000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 0000000000097000 - 0000000000098000
[ 0.000000] swsusp: Registered nosave memory region: 0000000000098000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d6000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d6000 - 00000000000d8000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d8000 - 00000000000e4000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 00000000bff70000 - 00000000bff78000
[ 0.000000] swsusp: Registered nosave memory region: 00000000bff78000 - 00000000bff80000
[ 0.000000] swsusp: Registered nosave memory region: 00000000bff80000 - 00000000c0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000c0000000 - 00000000e0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fee00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff800000
[ 0.000000] swsusp: Registered nosave memory region: 00000000ff800000 - 00000000ffc00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 42080 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029080
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=c8005201-b49c-4704-b80c-6e07fc55f5cc ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 50.986022] time.c: Detected 3000.057 MHz processor.
[ 50.988043] Console: colour VGA+ 80x25
[ 50.988047] console [tty0] enabled
[ 50.988068] Checking aperture...
[ 50.988078] Calgary: detecting Calgary via BIOS EBDA area
[ 50.988080] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 50.988082] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 51.029623] Placing software IO TLB between 0x103f000 - 0x503f000
[ 51.073131] Memory: 4042452k/5242880k available (2529k kernel code, 150856k reserved, 1331k data, 328k init)
[ 51.073178] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 51.073201] Calibrating delay loop (skipped), using tsc calculated value.. 6000.11 BogoMIPS (lpj=30000570)
[ 51.073236] Security Framework initialized
[ 51.073243] SELinux: Disabled at boot.
[ 51.073259] AppArmor: AppArmor initialized
[ 51.073264] Failure registering capabilities with primary security module.
[ 51.073895] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 51.076906] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 51.078217] Mount-cache hash table entries: 256
[ 51.078396] Initializing cgroup subsys ns
[ 51.078402] Initializing cgroup subsys cpuacct
[ 51.078425] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 51.078427] CPU: L2 cache: 2048K
[ 51.078430] CPU 0/0 -> Node 0
[ 51.078432] using mwait in idle threads.
[ 51.078435] CPU: Physical Processor ID: 0
[ 51.078436] CPU: Processor Core ID: 0
[ 51.078450] CPU0: Thermal monitoring enabled (TM1)
[ 51.078465] SMP alternatives: switching to UP code
[ 51.079538] Early unpacking initramfs... done
[ 51.399130] ACPI: Core revision 20070126
[ 51.399184] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 51.592776] Using local APIC timer interrupts.
[ 51.626083] APIC timer calibration result 12500175
[ 51.626085] Detected 12.500 MHz APIC timer.
[ 51.626206] SMP alternatives: switching to SMP code
[ 51.627087] Booting processor 1/2 APIC 0x1
[ 51.637533] Initializing CPU#1
[ 51.785943] Calibrating delay using timer specific routine.. 6000.14 BogoMIPS (lpj=30000738)
[ 51.785956] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 51.785959] CPU: L2 cache: 2048K
[ 51.785962] CPU 1/1 -> Node 0
[ 51.785965] CPU: Physical Processor ID: 0
[ 51.785966] CPU: Processor Core ID: 0
[ 51.785982] CPU1: Thermal monitoring enabled (TM1)
[ 51.786377] Intel(R) Xeon(TM) CPU 3.00GHz stepping 0a
[ 51.786413] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 51.806453] Brought up 2 CPUs
[ 51.806537] CPU0 attaching sched-domain:
[ 51.806541] domain 0: span 00000000,00000003
[ 51.806544] groups: 00000000,00000001 00000000,00000002
[ 51.806548] domain 1: span 00000000,00000003
[ 51.806550] groups: 00000000,00000003
[ 51.806553] domain 2: span 00000000,00000003
[ 51.806555] groups: 00000000,00000003
[ 51.806557] CPU1 attaching sched-domain:
[ 51.806559] domain 0: span 00000000,00000003
[ 51.806561] groups: 00000000,00000002 00000000,00000001
[ 51.806565] domain 1: span 00000000,00000003
[ 51.806566] groups: 00000000,00000003
[ 51.806569] domain 2: span 00000000,00000003
[ 51.806571] groups: 00000000,00000003
[ 51.806995] net_namespace: 120 bytes
[ 51.807425] Time: 13:06:21 Date: 11/10/09
[ 51.807467] NET: Registered protocol family 16
[ 51.807756] ACPI: bus type pci registered
[ 51.807869] PCI: Using configuration type 1
[ 51.809204] ACPI: EC: Look up EC in DSDT
[ 51.811136] ACPI: Interpreter enabled
[ 51.811140] ACPI: (supports S0 S1 S4 S5)
[ 51.811155] ACPI: Using IOAPIC for interrupt routing
[ 51.815887] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 51.816508] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 51.816512] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[ 51.817373] PCI: Transparent bridge - 0000:00:1e.0
[ 51.817405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 51.817673] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 51.817791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEY0._PRT]
[ 51.817909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT]
[ 51.818099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 51.822423] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 51.822509] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 51.822592] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 51.822676] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 51.822758] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 51.822841] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
[ 51.822923] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 51.823005] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 *11 14 15)
[ 51.823160] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 51.823203] pnp: PnP ACPI init
[ 51.823212] ACPI: bus type pnp registered
[ 51.826705] pnp: PnP ACPI: found 13 devices
[ 51.826708] ACPI: ACPI bus type pnp unregistered
[ 51.827089] PCI: Using ACPI for IRQ routing
[ 51.827094] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 51.886467] NET: Registered protocol family 8
[ 51.886470] NET: Registered protocol family 20
[ 51.886512] NetLabel: Initializing
[ 51.886515] NetLabel: domain hash size = 128
[ 51.886517] NetLabel: protocols = UNLABELED CIPSOv4
[ 51.886534] NetLabel: unlabeled traffic allowed by default
[ 51.886542] PCI-GART: No AMD northbridge found.
[ 51.886592] AppArmor: AppArmor Filesystem Enabled
[ 51.895837] Time: tsc clocksource has been installed.
[ 51.915871] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 51.915874] system 00:01: ioport range 0x295-0x296 has been reserved
[ 51.915876] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 51.915879] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 51.915881] system 00:01: ioport range 0x900-0x90f has been reserved
[ 51.915884] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 51.915887] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 51.916458] PCI: Bridge: 0000:00:02.0
[ 51.916462] IO window: 2000-2fff
[ 51.916466] MEM window: c0100000-c0bfffff
[ 51.916469] PREFETCH window: c3400000-c3bfffff
[ 51.916476] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:02:00.0
[ 51.916478] PCI: Bridge: 0000:00:04.0
[ 51.916479] IO window: disabled.
[ 51.916483] MEM window: c1000000-c2ffffff
[ 51.916486] PREFETCH window: d0000000-dfffffff
[ 51.916491] PCI: Bridge: 0000:00:1c.0
[ 51.916493] IO window: 3000-3fff
[ 51.916498] MEM window: c3000000-c30fffff
[ 51.916501] PREFETCH window: disabled.
[ 51.916506] PCI: Bridge: 0000:00:1e.0
[ 51.916508] IO window: 4000-4fff
[ 51.916513] MEM window: c3100000-c31fffff
[ 51.916517] PREFETCH window: disabled.
[ 51.916538] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 51.916543] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 51.916555] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 51.916560] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 51.916576] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 51.916586] NET: Registered protocol family 2
[ 52.026067] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 52.028002] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 52.033310] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 52.033989] TCP: Hash tables configured (established 524288 bind 65536)
[ 52.033992] TCP reno registered
[ 52.055890] checking if image is initramfs... it is
[ 52.415862] Switched to high resolution mode on CPU 1
[ 52.425327] Switched to high resolution mode on CPU 0
[ 52.680245] Freeing initrd memory: 7620k freed
[ 52.685045] Simple Boot Flag at 0x39 set to 0x1
[ 52.686168] audit: initializing netlink socket (disabled)
[ 52.686183] audit(1257858381.590:1): initialized
[ 52.686850] Total HugeTLB memory allocated, 0
[ 52.689463] VFS: Disk quotas dquot_6.5.1
[ 52.689552] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 52.689781] io scheduler noop registered
[ 52.689783] io scheduler anticipatory registered
[ 52.689785] io scheduler deadline registered (default)
[ 52.689916] io scheduler cfq registered
[ 52.691483] Boot video device is 0000:02:00.0
[ 52.691675] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 52.691705] Allocate Port Service[0000:00:02.0:pcie00]
[ 52.691806] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 52.691834] Allocate Port Service[0000:00:04.0:pcie00]
[ 52.725635] Real Time Clock Driver v1.12ac
[ 52.725762] Linux agpgart interface v0.102
[ 52.725765] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 52.725906] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 52.726038] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 52.726706] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 52.726940] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 52.727916] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 52.728005] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 52.728136] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 52.730467] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 52.730474] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 52.765112] mice: PS/2 mouse device common for all mice
[ 52.765169] cpuidle: using governor ladder
[ 52.765173] cpuidle: using governor menu
[ 52.765287] NET: Registered protocol family 1
[ 52.765359] registered taskstats version 1
[ 52.765485] Magic number: 1:225:129
[ 52.765626] hash matches device device:04
[ 52.765633] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 52.765636] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[ 52.765949] Freeing unused kernel memory: 328k freed
[ 52.766867] Write protecting the kernel read-only data: 1044k
[ 52.783734] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 52.943609] fuse init (API version 7.9)
[ 52.962477] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 52.962493] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 52.976160] md: linear personality registered for level -1
[ 52.980077] md: multipath personality registered for level -4
[ 52.983798] md: raid0 personality registered for level 0
[ 52.988048] md: raid1 personality registered for level 1
[ 52.991595] xor: automatically using best checksumming function: generic_sse
[ 53.034734] generic_sse: 4556.400 MB/sec
[ 53.034737] xor: using function: generic_sse (4556.400 MB/sec)
[ 53.035380] async_tx: api initialized (async)
[ 53.204572] raid6: int64x1 1469 MB/s
[ 53.374402] raid6: int64x2 2084 MB/s
[ 53.544246] raid6: int64x4 2214 MB/s
[ 53.714073] raid6: int64x8 1957 MB/s
[ 53.883920] raid6: sse2x1 2225 MB/s
[ 54.053756] raid6: sse2x2 3231 MB/s
[ 54.223576] raid6: sse2x4 3137 MB/s
[ 54.223578] raid6: using algorithm sse2x2 (3231 MB/s)
[ 54.223582] md: raid6 personality registered for level 6
[ 54.223583] md: raid5 personality registered for level 5
[ 54.223585] md: raid4 personality registered for level 4
[ 54.244127] md: raid10 personality registered for level 10
[ 54.654019] SCSI subsystem initialized
[ 54.703700] usbcore: registered new interface driver usbfs
[ 54.703735] usbcore: registered new interface driver hub
[ 54.706329] usbcore: registered new device driver usb
[ 54.706450] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 54.706453] Copyright (c) 1999-2006 Intel Corporation.
[ 54.706527] ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 54.721421] e1000: 0000:04:03.0: e1000_probe: (PCI:33MHz:32-bit) 00:30:48:55:a8:dd
[ 54.723224] USB Universal Host Controller Interface driver v3.0
[ 54.723310] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 54.723326] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 54.723331] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 54.723704] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 54.723750] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001840
[ 54.723980] usb usb1: configuration #1 chosen from 1 choice
[ 54.724017] hub 1-0:1.0: USB hub found
[ 54.724027] hub 1-0:1.0: 2 ports detected
[ 54.724112] libata version 3.00 loaded.
[ 54.835640] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 54.835657] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 54.835663] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 54.835699] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 54.835730] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 54.835896] usb usb2: configuration #1 chosen from 1 choice
[ 54.835937] hub 2-0:1.0: USB hub found
[ 54.835948] hub 2-0:1.0: 2 ports detected
[ 54.845699] Floppy drive(s): fd0 is 1.44M
[ 54.869278] FDC 0 is a post-1991 82077
[ 54.935363] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 54.945754] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
[ 54.946494] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 54.946503] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 54.946574] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 54.950508] ehci_hcd 0000:00:1d.7: debug port 1
[ 54.950517] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 54.950532] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc0000400
[ 54.972877] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 54.973102] usb usb3: configuration #1 chosen from 1 choice
[ 54.973142] hub 3-0:1.0: USB hub found
[ 54.973156] hub 3-0:1.0: 4 ports detected
[ 55.083004] sata_mv 0000:03:02.0: version 1.01
[ 55.083072] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 26 (level, low) -> IRQ 26
[ 55.083822] sata_mv 0000:03:02.0: Applying B2 workarounds to unknown rev
[ 55.085517] sata_mv 0000:03:02.0: Gen-II 32 slots 4 ports ? mode IRQ via INTx
[ 55.086482] scsi0 : sata_mv
[ 55.086566] scsi1 : sata_mv
[ 55.086624] scsi2 : sata_mv
[ 55.086691] scsi3 : sata_mv
[ 55.086727] ata1: SATA max UDMA/133 mmio m1048576@0xc3000000 port 0xc3022000 irq 26
[ 55.086731] ata2: SATA max UDMA/133 mmio m1048576@0xc3000000 port 0xc3024000 irq 26
[ 55.086735] ata3: SATA max UDMA/133 mmio m1048576@0xc3000000 port 0xc3026000 irq 26
[ 55.086738] ata4: SATA max UDMA/133 mmio m1048576@0xc3000000 port 0xc3028000 irq 26
[ 55.642227] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 55.662672] ata1.00: ATA-6: WDC WD3200SD-01KNB0, 08.05J08, max UDMA/100
[ 55.662675] ata1.00: 625142448 sectors, multi 0: LBA48
[ 55.702635] ata1.00: configured for UDMA/100
[ 55.754612] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 55.792099] ata2.00: ATA-8: WDC WD4001ABYS-01YNA0, 59.01D01, max UDMA/133
[ 55.792102] ata2.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 55.854546] ata2.00: configured for UDMA/133
[ 55.901971] ata3: SATA link down (SStatus 0 SControl 300)
[ 55.951909] ata4: SATA link down (SStatus 0 SControl 300)
[ 55.952066] scsi 0:0:0:0: Direct-Access ATA WDC WD3200SD-01K 08.0 PQ: 0 ANSI: 5
[ 55.952249] scsi 1:0:0:0: Direct-Access ATA WDC WD4001ABYS-0 59.0 PQ: 0 ANSI: 5
[ 55.952532] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 55.952579] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 55.952595] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 55.952616] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 55.952646] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 55.952660] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 55.959828] ata_piix 0000:00:1f.1: version 2.12
[ 55.959855] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 55.959899] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 55.959986] scsi4 : ata_piix
[ 55.960067] scsi5 : ata_piix
[ 55.961210] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 55.961214] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 55.969892] Driver 'sd' needs updating - please use bus_type methods
[ 55.970024] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 55.970046] sd 0:0:0:0: [sda] Write Protect is off
[ 55.970050] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 55.970083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 55.970173] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 55.970192] sd 0:0:0:0: [sda] Write Protect is off
[ 55.970196] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 55.970228] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 55.970234] sda: sda1
[ 55.975212] sd 0:0:0:0: [sda] Attached SCSI disk
[ 55.975303] sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
[ 55.975324] sd 1:0:0:0: [sdb] Write Protect is off
[ 55.975328] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 55.975361] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 55.975426] sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
[ 55.975445] sd 1:0:0:0: [sdb] Write Protect is off
[ 55.975449] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 55.975481] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 55.975487] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
[ 56.006193] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 56.013200] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 56.013234] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 56.021857] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 56.201398] usb 2-1: configuration #1 chosen from 1 choice
[ 56.451706] ata6.00: ATAPI: TOSHIBA DVD-ROM SDM2012C, TU01, max UDMA/33
[ 56.481385] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 56.639919] usb 2-2: configuration #1 chosen from 1 choice
[ 56.642923] usbcore: registered new interface driver hiddev
[ 56.653943] ata6.00: configured for UDMA/33
[ 56.654581] scsi 5:0:0:0: CD-ROM TOSHIBA DVD-ROM SDM2012C TU01 PQ: 0 ANSI: 5
[ 56.654694] scsi 5:0:0:0: Attached scsi generic sg2 type 5
[ 56.654729] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 56.654756] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 56.654805] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 56.654889] scsi6 : ata_piix
[ 56.654958] scsi7 : ata_piix
[ 56.655859] ata7: SATA max UDMA/133 cmd 0x18e8 ctl 0x18dc bmdma 0x18b0 irq 18
[ 56.655863] ata8: SATA max UDMA/133 cmd 0x18e0 ctl 0x18d8 bmdma 0x18b8 irq 18
[ 56.656194] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2
[ 56.701240] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-1
[ 56.714881] input: HID 046a:0001 as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input3
[ 56.763644] input,hidraw1: USB HID v1.00 Keyboard [HID 046a:0001] on usb-0000:00:1d.1-2
[ 56.763669] usbcore: registered new interface driver usbhid
[ 56.763676] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 56.841362] ata7.00: ATA-6: WDC WD3200SD-01KNB0, 08.05J08, max UDMA/100
[ 56.841367] ata7.00: 625142448 sectors, multi 16: LBA48
[ 56.853873] ata7.00: configured for UDMA/100
[ 57.031181] ata8.00: ATA-6: WDC WD3200SD-01KNB0, 08.05J08, max UDMA/100
[ 57.031184] ata8.00: 625142448 sectors, multi 16: LBA48
[ 57.071137] ata8.00: configured for UDMA/100
[ 57.071283] scsi 6:0:0:0: Direct-Access ATA WDC WD3200SD-01K 08.0 PQ: 0 ANSI: 5
[ 57.071403] sd 6:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[ 57.071427] sd 6:0:0:0: [sdc] Write Protect is off
[ 57.071431] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 57.071472] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 57.071563] sd 6:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[ 57.071582] sd 6:0:0:0: [sdc] Write Protect is off
[ 57.071586] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 57.071618] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 57.071623] sdc: sdc1
[ 57.079965] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 57.080020] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 57.080123] scsi 7:0:0:0: Direct-Access ATA WDC WD3200SD-01K 08.0 PQ: 0 ANSI: 5
[ 57.080220] sd 7:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
[ 57.080239] sd 7:0:0:0: [sdd] Write Protect is off
[ 57.080243] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 57.080276] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 57.080334] sd 7:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
[ 57.080355] sd 7:0:0:0: [sdd] Write Protect is off
[ 57.080358] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 57.080390] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 57.080396] sdd: sdd1
[ 57.088656] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 57.088706] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 57.103223] Driver 'sr' needs updating - please use bus_type methods
[ 57.115094] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 57.115100] Uniform CD-ROM driver Revision: 3.20
[ 57.115183] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 58.083456] Attempting manual resume
[ 58.083461] swsusp: Resume From Partition 8:21
[ 58.083463] PM: Checking swsusp image.
[ 58.083623] PM: Resume from disk failed.
[ 58.097607] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 58.097615] EXT3-fs: write access will be enabled during recovery.
[ 59.081019] kjournald starting. Commit interval 5 seconds
[ 59.081033] EXT3-fs: recovery complete.
[ 59.081457] EXT3-fs: mounted filesystem with ordered data mode.
[ 61.556849] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 61.593895] EDAC MC: Ver: 2.1.0 Oct 20 2009
[ 61.738822] intel_rng: FWH not detected
[ 61.790024] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 61.809131] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 61.843202] input: Power Button (FF) as /devices/virtual/input/input5
[ 61.875327] parport_pc 00:0c: reported by Plug and Play ACPI
[ 61.875426] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 61.888783] ACPI: Power Button (FF) [PWRF]
[ 61.888997] input: Power Button (CM) as /devices/virtual/input/input6
[ 61.937497] EDAC e752x: tolm = c0000, remapbase = 100000, remaplimit = 13c000
[ 61.937591] EDAC MC0: Giving out device to 'e752x_edac' 'E7525': DEV 0000:00:00.0
[ 61.937659] EDAC PCI0: Giving out device to module 'e752x_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 61.958611] ACPI: Power Button (CM) [PWRB]
[ 62.287471] md: bind<sda1>
[ 62.287678] md: bind<sdc1>
[ 62.287870] md: bind<sdd1>
[ 62.288054] md: bind<sdb3>
[ 62.438290] iTCO_vendor_support: vendor-support=0
[ 62.454287] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 62.454436] iTCO_wdt: Found a 6300ESB TCO device (Version=1, TCOBASE=0x1060)
[ 62.454487] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 62.499006] raid5: device sdb3 operational as raid disk 0
[ 62.499014] raid5: device sdd1 operational as raid disk 3
[ 62.499018] raid5: device sdc1 operational as raid disk 2
[ 62.499021] raid5: device sda1 operational as raid disk 1
[ 62.507507] raid5: allocated 4274kB for md0
[ 62.507513] raid5: raid level 5 set md0 active with 4 out of 4 devices, algorithm 2
[ 62.507516] RAID5 conf printout:
[ 62.507518] --- rd:4 wd:4
[ 62.507521] disk 0, o:1, dev:sdb3
[ 62.507525] disk 1, o:1, dev:sda1
[ 62.507528] disk 2, o:1, dev:sdc1
[ 62.507531] disk 3, o:1, dev:sdd1
[ 62.543204] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 62.544558] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 62.649710] Intel(R) Gigabit Ethernet Network Driver - version 1.3.28.4
[ 62.649716] Copyright (c) 2007-2008 Intel Corporation.
[ 62.895153] intel8x0_measure_ac97_clock: measured 58800 usecs
[ 62.895160] intel8x0: clocking to 48000
[ 62.895727] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 62.895756] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 62.996884] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 63.157691] igb: eth1: igb_probe: Intel(R) Gigabit Ethernet Network Connection
[ 63.157699] igb: eth1: igb_probe: (PCIe:2.5Gb/s:Width x4) 00:1b:21:48:3e:7c
[ 63.157708] igb: eth1: igb_probe: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 63.157744] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 63.157772] PCI: Setting latency timer of device 0000:01:00.1 to 64
[ 63.407380] igb: eth2: igb_probe: Intel(R) Gigabit Ethernet Network Connection
[ 63.407387] igb: eth2: igb_probe: (PCIe:2.5Gb/s:Width x4) 00:1b:21:48:3e:7d
[ 63.407396] igb: eth2: igb_probe: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 64.372092] NET: Registered protocol family 17
[ 64.744513] NET: Registered protocol family 10
[ 64.744923] lo: Disabled Privacy Extensions
[ 64.746559] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 64.747438] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 65.036062] igb: eth2: igb_watchdog_task: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 65.042867] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 65.386946] loop: module loaded
[ 65.406523] lp0: using parport0 (interrupt-driven).
[ 65.636838] Adding 3903752k swap on /dev/sdb5. Priority:-1 extents:1 across:3903752k
[ 65.855225] igb: eth1: igb_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 65.860363] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 65.896018] EXT3 FS on sdb2, internal journal
[ 67.658850] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 75.435410] eth2: no IPv6 routers present
[ 75.585263] eth0: no IPv6 routers present
[ 76.014843] eth1: no IPv6 routers present