No network is detected, disabling ifdown()
kexec_load_argv: /usr/sbin/kexec, -l, --command-line=console=ttyS0,115200n8 console=tty1 noinitrd debug root=/dev/mmcblk0p1 rootfstype=ext2 rootwait, /mnt/boot/zImage.bin
kexec_exec_argv: /usr/sbin/kexec, -e, -x
Uncompressing Linux............................................................................. done, booting the kernel.
Linux version 2.6.31-rc9 (andrea@mizar) (gcc version 4.3.3 (GCC) ) #1 PREEMPT Sat Oct 24 23:17:29 CEST 2009
CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), cr=0000397f
CPU: VIVT data cache, VIVT instruction cache
Machine: SHARP Husky
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat c02519fc, node_mem_map c0266000
Normal zone: 128 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 16256 pages, LIFO batch:3
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 398.13MHz (*2.0, active)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttyS0,115200n8 console=tty1 noinitrd debug root=/dev/mmcblk0p1 rootfstype=ext2 rootwait
PID hash table entries: 256 (order: 8, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 62456KB available (2072K code, 160K data, 180K init, 0K highmem)
Hierarchical RCU implementation.
NR_IRQS:192
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
PM: Adding info for No Bus:platform
PM: Adding info for platform:pxa25x-udc
PM: Adding info for platform:pxa2xx-uart.0
PM: Adding info for platform:pxa2xx-uart.1
PM: Adding info for platform:pxa2xx-uart.2
PM: Adding info for platform:pxa2xx-i2s
PM: Adding info for platform:sa1100-rtc
PM: Adding info for platform:pxa25x-ssp.0
PM: Adding info for platform:pxa25x-nssp.1
PM: Adding info for platform:pxa25x-nssp.2
PM: Adding info for platform:pxa25x-pwm.0
PM: Adding info for platform:pxa25x-pwm.1
PM: Adding info for platform:pxa2xx-uart.3
PM: Adding info for No Bus:gpiochip0
PM: Adding info for No Bus:gpiochip32
PM: Adding info for No Bus:gpiochip64
PM: Adding info for No Bus:vtcon0
PM: Adding info for platform:pxa2xx-spi.1
PM: Adding info for platform:pxa2xx-mci.0
PM: Adding info for platform:pxa2xx-ir
PM: Adding info for platform:pxa2xx-i2c.0
PM: Adding info for platform:sharp-scoop
PM: Adding info for platform:w100fb
PM: Adding info for platform:corgi-keyboard
PM: Adding info for platform:leds-gpio
PM: Adding info for platform:sharpsl-nand
PM: Adding info for platform:physmap-flash
Sharp Scoop Device found at 0x10800000 -> 0xc4814000
PM: Adding info for No Bus:gpiochip128
PM: Adding info for No Bus:default
bio: create slab <bio-0> at 0
PM: Adding info for No Bus:i2c-0
PM: Adding info for i2c:0-001b
I2C: i2c-0: PXA I2C adapter
PM: Adding info for No Bus:mem
PM: Adding info for No Bus:kmem
PM: Adding info for No Bus:null
PM: Adding info for No Bus:zero
PM: Adding info for No Bus:full
Switched to NOHz mode on CPU #0
PM: Adding info for No Bus:random
PM: Adding info for No Bus:urandom
PM: Adding info for No Bus:kmsg
PM: Adding info for platform:pxa2xx-pcmcia
PM: Adding info for No Bus:pcmcia_socket0
PM: Adding info for platform:sharpsl-pm
JFFS2 version 2.2. (NAND) (SUMMARY) 2001-2006 Red Hat, Inc.
msgmni has been set to 122
io scheduler noop registered
io scheduler deadline registered (default)
PM: Adding info for No Bus:fbcon
Found w100 at 0x08000000.
PM: Adding info for No Bus:fb0
PM: Adding info for No Bus:vtcon1
Console: switching to colour frame buffer device 80x30
fb0: w100fb frame buffer device
PM: Adding info for No Bus:tty
PM: Adding info for No Bus:console
PM: Adding info for No Bus:tty0
PM: Adding info for No Bus:vcs
PM: Adding info for No Bus:vcsa
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Adding info for No Bus:tty1
PM: Adding info for No Bus:tty2
PM: Adding info for No Bus:tty3
PM: Adding info for No Bus:tty4
PM: Adding info for No Bus:tty5
PM: Adding info for No Bus:tty6
PM: Adding info for No Bus:tty7
PM: Adding info for No Bus:tty8
PM: Adding info for No Bus:tty9
PM: Adding info for No Bus:tty10
PM: Adding info for No Bus:tty11
PM: Adding info for No Bus:tty12
PM: Adding info for No Bus:tty13
PM: Adding info for No Bus:tty14
PM: Adding info for No Bus:tty15
PM: Adding info for No Bus:tty16
PM: Adding info for No Bus:tty17
PM: Adding info for No Bus:tty18
PM: Adding info for No Bus:tty19
PM: Adding info for No Bus:tty20
PM: Adding info for No Bus:tty21
PM: Adding info for No Bus:tty22
PM: Adding info for No Bus:tty23
PM: Adding info for No Bus:tty24
PM: Adding info for No Bus:tty25
PM: Adding info for No Bus:tty26
PM: Adding info for No Bus:tty27
PM: Adding info for No Bus:tty28
PM: Adding info for No Bus:tty29
PM: Adding info for No Bus:tty30
PM: Adding info for No Bus:tty31
PM: Adding info for No Bus:tty32
PM: Adding info for No Bus:tty33
PM: Adding info for No Bus:tty34
PM: Adding info for No Bus:tty35
PM: Adding info for No Bus:tty36
PM: Adding info for No Bus:tty37
PM: Adding info for No Bus:tty38
PM: Adding info for No Bus:tty39
PM: Adding info for No Bus:tty40
PM: Adding info for No Bus:tty41
PM: Adding info for No Bus:tty42
PM: Adding info for No Bus:tty43
PM: Adding info for No Bus:tty44
PM: Adding info for No Bus:tty45
PM: Adding info for No Bus:tty46
PM: Adding info for No Bus:tty47
PM: Adding info for No Bus:tty48
PM: Adding info for No Bus:tty49
PM: Adding info for No Bus:tty50
PM: Adding info for No Bus:tty51
PM: Adding info for No Bus:tty52
PM: Adding info for No Bus:tty53
PM: Adding info for No Bus:tty54
PM: Adding info for No Bus:tty55
PM: Adding info for No Bus:tty56
PM: Adding info for No Bus:tty57
PM: Adding info for No Bus:tty58
PM: Adding info for No Bus:tty59
PM: Adding info for No Bus:tty60
PM: Adding info for No Bus:tty61
PM: Adding info for No Bus:tty62
PM: Adding info for No Bus:tty63
PM: Adding info for No Bus:ptmx
PM: Adding info for No Bus:apm_bios
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
console [ttyS0] enabled
PM: Adding info for No Bus:ttyS0
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
PM: Adding info for No Bus:ttyS1
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
PM: Adding info for No Bus:ttyS2
pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 7) is a HWUART
PM: Adding info for No Bus:ttyS3
PM: Adding info for No Bus:loop0
PM: Adding info for No Bus:7:0
PM: Adding info for No Bus:loop1
PM: Adding info for No Bus:7:1
PM: Adding info for No Bus:loop2
PM: Adding info for No Bus:7:2
PM: Adding info for No Bus:loop3
PM: Adding info for No Bus:7:3
PM: Adding info for No Bus:loop4
PM: Adding info for No Bus:7:4
PM: Adding info for No Bus:loop5
PM: Adding info for No Bus:7:5
PM: Adding info for No Bus:loop6
PM: Adding info for No Bus:7:6
PM: Adding info for No Bus:loop7
PM: Adding info for No Bus:7:7
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
NAND device: Manufacturer ID: 0xec, Chip ID: 0x79 (Samsung NAND 128MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 32 at 0x000000080000
Bad eraseblock 1440 at 0x000001680000
Creating 3 MTD partitions on "sharpsl-nand":
0x000000000000-0x000000700000 : "System Area"
PM: Adding info for No Bus:mtd0
PM: Adding info for No Bus:mtd0ro
PM: Adding info for No Bus:mtdblock0
PM: Adding info for No Bus:31:0
0x000000700000-0x000003c00000 : "Root Filesystem"
PM: Adding info for No Bus:mtd1
PM: Adding info for No Bus:mtd1ro
PM: Adding info for No Bus:mtdblock1
0x000003c00000-0x000008000000 : "Home Filesystem"
PM: Adding info for No Bus:mtd2
PM: Adding info for No Bus:mtd2ro
PM: Adding info for No Bus:mtdblock2
PM: Adding info for No Bus:spi1
PM: Adding info for spi:spi1.0
PM: Adding info for spi:spi1.1
PM: Adding info for No Bus:corgi_lcd
PM: Adding info for No Bus:corgi_bl
PM: Adding info for spi:spi1.2
PM: Adding info for No Bus:input0
input: Corgi Keyboard as /devices/platform/corgi-keyboard/input/input0
PM: Adding info for No Bus:event0
PM: Adding info for No Bus:hwmon0
ads7846 spi1.0: touchscreen, irq 69
PM: Adding info for No Bus:input1
input: ADS7846 Touchscreen as /devices/platform/pxa2xx-spi.1/spi1.0/input/input1
PM: Adding info for No Bus:event1
PM: Adding info for No Bus:rtc0
sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
PM: Adding info for No Bus:hwmon1
PM: Adding info for No Bus:mmc0
PM: Adding info for No Bus:corgi:amber:charge
Registered led device: corgi:amber:charge
PM: Adding info for No Bus:corgi:green:mail
Registered led device: corgi:green:mail
XScale DSP coprocessor detected.
PM: Adding info for No Bus:cpu_dma_latency
PM: Adding info for No Bus:network_latency
PM: Adding info for No Bus:network_throughput
sa1100-rtc sa1100-rtc: setting system clock to 1970-01-01 00:01:05 UTC (65)
Freeing init memory: 180K
mmc0: new SD card at address b368
PM: Adding info for mmc:mmc0:b368
mmcblk0: mmc0:b368 SMI 489 MiB
PM: Adding info for No Bus:mmcblk0
mmcblk0: p1
PM: Adding info for No Bus:mmcblk0p1
PM: Adding info for No Bus:179:0
Uncompressing Linux............................................................................. done, booting the kernel.
Linux version 2.6.31-rc9 (andrea@mizar) (gcc version 4.3.3 (GCC) ) #1 PREEMPT Sat Oct 24 23:17:29 CEST 2009
CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), cr=0000397f
CPU: VIVT data cache, VIVT instruction cache
Machine: SHARP Husky
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat c02519fc, node_mem_map c0266000
Normal zone: 128 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 16256 pages, LIFO batch:3
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 398.13MHz (*2.0, active)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttyS0,115200n8 console=tty1 noinitrd debug root=/dev/mmcblk0p1 rootfstype=ext2 rootwait
PID hash table entries: 256 (order: 8, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 62456KB available (2072K code, 160K data, 180K init, 0K highmem)
Hierarchical RCU implementation.
NR_IRQS:192
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
PM: Adding info for No Bus:platform
PM: Adding info for platform:pxa25x-udc
PM: Adding info for platform:pxa2xx-uart.0
PM: Adding info for platform:pxa2xx-uart.1
PM: Adding info for platform:pxa2xx-uart.2
PM: Adding info for platform:pxa2xx-i2s
PM: Adding info for platform:sa1100-rtc
PM: Adding info for platform:pxa25x-ssp.0
PM: Adding info for platform:pxa25x-nssp.1
PM: Adding info for platform:pxa25x-nssp.2
PM: Adding info for platform:pxa25x-pwm.0
PM: Adding info for platform:pxa25x-pwm.1
PM: Adding info for platform:pxa2xx-uart.3
PM: Adding info for No Bus:gpiochip0
PM: Adding info for No Bus:gpiochip32
PM: Adding info for No Bus:gpiochip64
PM: Adding info for No Bus:vtcon0
PM: Adding info for platform:pxa2xx-spi.1
PM: Adding info for platform:pxa2xx-mci.0
PM: Adding info for platform:pxa2xx-ir
PM: Adding info for platform:pxa2xx-i2c.0
PM: Adding info for platform:sharp-scoop
PM: Adding info for platform:w100fb
PM: Adding info for platform:corgi-keyboard
PM: Adding info for platform:leds-gpio
PM: Adding info for platform:sharpsl-nand
PM: Adding info for platform:physmap-flash
Sharp Scoop Device found at 0x10800000 -> 0xc4814000
PM: Adding info for No Bus:gpiochip128
PM: Adding info for No Bus:default
bio: create slab <bio-0> at 0
PM: Adding info for No Bus:i2c-0
PM: Adding info for i2c:0-001b
I2C: i2c-0: PXA I2C adapter
PM: Adding info for No Bus:mem
PM: Adding info for No Bus:kmem
PM: Adding info for No Bus:null
PM: Adding info for No Bus:zero
PM: Adding info for No Bus:full
Switched to NOHz mode on CPU #0
PM: Adding info for No Bus:random
PM: Adding info for No Bus:urandom
PM: Adding info for No Bus:kmsg
PM: Adding info for platform:pxa2xx-pcmcia
PM: Adding info for No Bus:pcmcia_socket0
PM: Adding info for platform:sharpsl-pm
JFFS2 version 2.2. (NAND) (SUMMARY) 2001-2006 Red Hat, Inc.
msgmni has been set to 122
io scheduler noop registered
io scheduler deadline registered (default)
PM: Adding info for No Bus:fbcon
Found w100 at 0x08000000.
PM: Adding info for No Bus:fb0
PM: Adding info for No Bus:vtcon1
Console: switching to colour frame buffer device 80x30
fb0: w100fb frame buffer device
PM: Adding info for No Bus:tty
PM: Adding info for No Bus:console
PM: Adding info for No Bus:tty0
PM: Adding info for No Bus:vcs
PM: Adding info for No Bus:vcsa
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Adding info for No Bus:tty1
PM: Adding info for No Bus:tty2
PM: Adding info for No Bus:tty3
PM: Adding info for No Bus:tty4
PM: Adding info for No Bus:tty5
PM: Adding info for No Bus:tty6
PM: Adding info for No Bus:tty7
PM: Adding info for No Bus:tty8
PM: Adding info for No Bus:tty9
PM: Adding info for No Bus:tty10
PM: Adding info for No Bus:tty11
PM: Adding info for No Bus:tty12
PM: Adding info for No Bus:tty13
PM: Adding info for No Bus:tty14
PM: Adding info for No Bus:tty15
PM: Adding info for No Bus:tty16
PM: Adding info for No Bus:tty17
PM: Adding info for No Bus:tty18
PM: Adding info for No Bus:tty19
PM: Adding info for No Bus:tty20
PM: Adding info for No Bus:tty21
PM: Adding info for No Bus:tty22
PM: Adding info for No Bus:tty23
PM: Adding info for No Bus:tty24
PM: Adding info for No Bus:tty25
PM: Adding info for No Bus:tty26
PM: Adding info for No Bus:tty27
PM: Adding info for No Bus:tty28
PM: Adding info for No Bus:tty29
PM: Adding info for No Bus:tty30
PM: Adding info for No Bus:tty31
PM: Adding info for No Bus:tty32
PM: Adding info for No Bus:tty33
PM: Adding info for No Bus:tty34
PM: Adding info for No Bus:tty35
PM: Adding info for No Bus:tty36
PM: Adding info for No Bus:tty37
PM: Adding info for No Bus:tty38
PM: Adding info for No Bus:tty39
PM: Adding info for No Bus:tty40
PM: Adding info for No Bus:tty41
PM: Adding info for No Bus:tty42
PM: Adding info for No Bus:tty43
PM: Adding info for No Bus:tty44
PM: Adding info for No Bus:tty45
PM: Adding info for No Bus:tty46
PM: Adding info for No Bus:tty47
PM: Adding info for No Bus:tty48
PM: Adding info for No Bus:tty49
PM: Adding info for No Bus:tty50
PM: Adding info for No Bus:tty51
PM: Adding info for No Bus:tty52
PM: Adding info for No Bus:tty53
PM: Adding info for No Bus:tty54
PM: Adding info for No Bus:tty55
PM: Adding info for No Bus:tty56
PM: Adding info for No Bus:tty57
PM: Adding info for No Bus:tty58
PM: Adding info for No Bus:tty59
PM: Adding info for No Bus:tty60
PM: Adding info for No Bus:tty61
PM: Adding info for No Bus:tty62
PM: Adding info for No Bus:tty63
PM: Adding info for No Bus:ptmx
PM: Adding info for No Bus:apm_bios
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
console [ttyS0] enabled
PM: Adding info for No Bus:ttyS0
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
PM: Adding info for No Bus:ttyS1
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
PM: Adding info for No Bus:ttyS2
pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 7) is a HWUART
PM: Adding info for No Bus:ttyS3
PM: Adding info for No Bus:loop0
PM: Adding info for No Bus:7:0
PM: Adding info for No Bus:loop1
PM: Adding info for No Bus:7:1
PM: Adding info for No Bus:loop2
PM: Adding info for No Bus:7:2
PM: Adding info for No Bus:loop3
PM: Adding info for No Bus:7:3
PM: Adding info for No Bus:loop4
PM: Adding info for No Bus:7:4
PM: Adding info for No Bus:loop5
PM: Adding info for No Bus:7:5
PM: Adding info for No Bus:loop6
PM: Adding info for No Bus:7:6
PM: Adding info for No Bus:loop7
PM: Adding info for No Bus:7:7
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
NAND device: Manufacturer ID: 0xec, Chip ID: 0x79 (Samsung NAND 128MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 32 at 0x000000080000
Bad eraseblock 1440 at 0x000001680000
Creating 3 MTD partitions on "sharpsl-nand":
0x000000000000-0x000000700000 : "System Area"
PM: Adding info for No Bus:mtd0
PM: Adding info for No Bus:mtd0ro
PM: Adding info for No Bus:mtdblock0
PM: Adding info for No Bus:31:0
0x000000700000-0x000003c00000 : "Root Filesystem"
PM: Adding info for No Bus:mtd1
PM: Adding info for No Bus:mtd1ro
PM: Adding info for No Bus:mtdblock1
0x000003c00000-0x000008000000 : "Home Filesystem"
PM: Adding info for No Bus:mtd2
PM: Adding info for No Bus:mtd2ro
PM: Adding info for No Bus:mtdblock2
PM: Adding info for No Bus:spi1
PM: Adding info for spi:spi1.0
PM: Adding info for spi:spi1.1
PM: Adding info for No Bus:corgi_lcd
PM: Adding info for No Bus:corgi_bl
PM: Adding info for spi:spi1.2
PM: Adding info for No Bus:input0
input: Corgi Keyboard as /devices/platform/corgi-keyboard/input/input0
PM: Adding info for No Bus:event0
PM: Adding info for No Bus:hwmon0
ads7846 spi1.0: touchscreen, irq 69
PM: Adding info for No Bus:input1
input: ADS7846 Touchscreen as /devices/platform/pxa2xx-spi.1/spi1.0/input/input1
PM: Adding info for No Bus:event1
PM: Adding info for No Bus:rtc0
sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
PM: Adding info for No Bus:hwmon1
PM: Adding info for No Bus:mmc0
PM: Adding info for No Bus:corgi:amber:charge
Registered led device: corgi:amber:charge
PM: Adding info for No Bus:corgi:green:mail
Registered led device: corgi:green:mail
XScale DSP coprocessor detected.
PM: Adding info for No Bus:cpu_dma_latency
PM: Adding info for No Bus:network_latency
PM: Adding info for No Bus:network_throughput
sa1100-rtc sa1100-rtc: setting system clock to 1970-01-01 00:02:19 UTC (139)
Freeing init memory: 180K
mmc0: new SD card at address b368
PM: Adding info for mmc:mmc0:b368
mmcblk0: mmc0:b368 SMI 489 MiB
PM: Adding info for No Bus:mmcblk0
mmcblk0: p1
PM: Adding info for No Bus:mmcblk0p1
PM: Adding info for No Bus:179:0