rendered paste bodyBootdata ok (command line is BOOT_IMAGE=gentoo ro root=304)
Linux version 2.6.17 (root@livecd) (gcc version 4.1.1 (Gentoo 4.1.1)) #2 SMP Fri Sep 8 05:29:07 IST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001de90000 (usable)
BIOS-e820: 000000001de90000 - 000000001dea1000 (ACPI data)
BIOS-e820: 000000001dea1000 - 000000001df00000 (ACPI NVS)
BIOS-e820: 000000001df00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI 2.3 present.
ACPI: RSDP (v000 FUJ ) @ 0x00000000000f5ea0
ACPI: RSDT (v001 FUJ FJNB19A 0x01040000 FUJ 0x00000100) @ 0x000000001de9ac0e
ACPI: FADT (v001 FUJ FJNB19A 0x01040000 FUJ 0x00000100) @ 0x000000001dea0f8c
ACPI: MADT (v001 FUJ FJNB19A 0x01040000 FUJ 0x00000100) @ 0x000000001dea0e15
ACPI: SSDT (v001 FUJ FJNB19A 0x01040000 FUJ 0x00001000) @ 0x000000001dea0e65
ACPI: MCFG (v001 FUJ FJNB19A 0x01040000 FUJ 0x00000100) @ 0x000000001dea0f28
ACPI: BOOT (v001 FUJ FJNB19A 0x01040000 FUJ 0x00000100) @ 0x000000001dea0f64
ACPI: DSDT (v001 FUJ FJNB19A 0x01040000 MSFT 0x0100000e) @ 0x0000000000000000
No mptable found.
On node 0 totalpages: 119203
DMA zone: 2405 pages, LIFO batch:0
DMA32 zone: 116798 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xfc20
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=gentoo ro root=304
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 16384 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 795.949 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Memory: 475764k/490048k available (3306k kernel code, 13720k reserved, 1130k data, 224k init)
Calibrating delay using timer specific routine.. 1593.89 BogoMIPS (lpj=3187791)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Using local APIC timer interrupts.
result 12436723
Detected 12.436 MHz APIC timer.
Brought up 1 CPUs
testing NMI watchdog ... OK.
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: No mmconfig possible on device 0:18
ACPI: Subsystem revision 20060127
GSI 21 sharing vector 0xB1 and IRQ 21
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08 (-#09) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: d4100000-d41fffff
PREFETCH window: d8000000-dbffffff
PCI: Bus 9, cardbus bridge: 0000:08:08.0
IO window: 00003000-000030ff
IO window: 00003400-000034ff
PREFETCH window: 30000000-31ffffff
MEM window: 32000000-33ffffff
PCI: Bridge: 0000:00:14.4
IO window: 3000-3fff
MEM window: d4200000-d42fffff
PREFETCH window: 30000000-31ffffff
GSI 16 sharing vector 0xB9 and IRQ 16
ACPI: PCI Interrupt 0000:08:08.0[A] -> GSI 20 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x7f set to 0x1
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Total HugeTLB memory allocated, 0
JFS: nTxBlock = 3718, nTxLock = 29746
SGI XFS with ACLs, large block/inode numbers, no debug enabled
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010380000, using 4608k, total 32768k
vesafb: mode is 1024x768x24, linelength=3072, pages=13
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [CMB1] (battery present)
ACPI: Battery Slot [CMB2] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
GSI 17 sharing vector 0xC1 and IRQ 17
ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
isa bounce pool size: 16 pages
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
GSI 18 sharing vector 0xC9 and IRQ 18
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK8025GAS, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: UJDA760 DVD/CDRW, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Losing some ticks... checking if CPU frequency changed.
Uniform CD-ROM driver Revision: 3.20
usbmon: debugfs is not available
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: generic_sse
generic_sse: 2436.000 MB/sec
raid5: using function: generic_sse (2436.000 MB/sec)
raid6: int64x1 741 MB/s
raid6: int64x2 991 MB/s
raid6: int64x4 1056 MB/s
raid6: int64x8 708 MB/s
raid6: sse2x1 869 MB/s
raid6: sse2x2 1210 MB/s
raid6: sse2x4 1384 MB/s
raid6: using algorithm sse2x4 (1384 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0xa (1300 mV)
powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
cpu_init done, current fid 0x0, vid 0x16
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
input: AT Translated Set 2 keyboard as /class/input/input0
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
input: PS/2 Mouse as /class/input/input1
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 224k freed
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
GSI 19 sharing vector 0xD1 and IRQ 19
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 19, io mem 0xd4000000
snd_page_alloc: disagrees about version of symbol struct_module
snd_page_alloc: disagrees about version of symbol struct_module
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ieee1394: Initialized config rom entry `ip1394'
snd: disagrees about version of symbol struct_module
snd: disagrees about version of symbol struct_module
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 19, io mem 0xd4001000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
snd_timer: disagrees about version of symbol struct_module
snd_timer: disagrees about version of symbol struct_module
usb 1-1: new low speed USB device using ohci_hcd and address 2
snd_pcm: disagrees about version of symbol struct_module
usb 1-1: configuration #1 chosen from 1 choice
snd_pcm: disagrees about version of symbol struct_module
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4002000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
snd_ac97_bus: disagrees about version of symbol struct_module
snd_ac97_bus: disagrees about version of symbol struct_module
snd_ac97_codec: disagrees about version of symbol struct_module
snd_ac97_codec: disagrees about version of symbol struct_module
snd_atiixp: disagrees about version of symbol struct_module
snd_atiixp_modem: disagrees about version of symbol struct_module
usb 1-1: USB disconnect, address 2
b44.c:v1.00 (Apr 7, 2006)
ACPI: PCI Interrupt 0000:08:09.0[A] -> GSI 20 (level, low) -> IRQ 16
eth0: Broadcom 4400 10/100BaseT Ethernet 00:0b:5d:9e:6c:18
ohci_hcd 0000:00:13.0: wakeup
GSI 20 sharing vector 0xD9 and IRQ 20
ACPI: PCI Interrupt 0000:08:0b.0[A] -> GSI 22 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4216800-d4216fff] Max Packet=[2048] IR/IT contexts=[4/8]
usb 1-1: new low speed USB device using ohci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000e10032b631d]
snd_page_alloc: disagrees about version of symbol struct_module
snd: disagrees about version of symbol struct_module
snd_timer: disagrees about version of symbol struct_module
snd_page_alloc: disagrees about version of symbol struct_module
snd: disagrees about version of symbol struct_module
snd_timer: disagrees about version of symbol struct_module
snd_pcm: disagrees about version of symbol struct_module
snd_ac97_bus: disagrees about version of symbol struct_module
snd_ac97_codec: disagrees about version of symbol struct_module
snd_atiixp: disagrees about version of symbol struct_module
snd_pcm: disagrees about version of symbol struct_module
snd_ac97_bus: disagrees about version of symbol struct_module
snd_ac97_codec: disagrees about version of symbol struct_module
snd_atiixp_modem: disagrees about version of symbol struct_module
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
usbcore: registered new driver hiddev
input: USB Mouse as /class/input/input3
input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:13.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
EXT3 FS on hda4, internal journal
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 396 MBytes.
[fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0
Adding 996020k swap on /dev/hda3. Priority:-1 extents:1 across:996020k
ADDRCONF(NETDEV_UP): eth0: link is not ready
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
X: page allocation failure. order:0, mode:0x1024
Call Trace: <ffffffff8025593b>{__alloc_pages+683} <ffffffff802112fa>{dma_alloc_pages+58}
<ffffffff802113b9>{dma_alloc_coherent+121} <ffffffff8807671e>{:fglrx:firegl_alloc_page+222}
<ffffffff88075dc5>{:fglrx:firegl_bind_pcie+261} <ffffffff88071d72>{:fglrx:create_buffer_queue+402}
<ffffffff8807119a>{:fglrx:firegl_alloc_bufs+298} <ffffffff88071070>{:fglrx:firegl_alloc_bufs+0}
<ffffffff8806d945>{:fglrx:firegl_ioctl+437} <ffffffff80285b19>{do_ioctl+105}
<ffffffff80285df2>{vfs_ioctl+674} <ffffffff80272e3e>{vfs_write+302}
<ffffffff80285e79>{sys_ioctl+73} <ffffffff80209cda>{system_call+126}
Mem-info:
DMA per-cpu:
cpu 0 hot: high 0, batch 1 used:0
cpu 0 cold: high 0, batch 1 used:0
DMA32 per-cpu:
cpu 0 hot: high 186, batch 31 used:30
cpu 0 cold: high 62, batch 15 used:52
Normal per-cpu: empty
HighMem per-cpu: empty
Free pages: 2876kB (0kB HighMem)
Active:5058 inactive:103829 dirty:73 writeback:0 unstable:0 free:719 slab:6310 mapped:3715 pagetables:153
DMA free:1848kB min:52kB low:64kB high:76kB active:168kB inactive:7632kB present:9620kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 456 456 456
DMA32 free:1028kB min:2704kB low:3380kB high:4056kB active:20064kB inactive:407684kB present:467192kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Normal free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
HighMem free:0kB min:128kB low:128kB high:128kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
DMA: 0*4kB 1*8kB 1*16kB 1*32kB 0*64kB 0*128kB 1*256kB 1*512kB 1*1024kB 0*2048kB 0*4096kB = 1848kB
DMA32: 1*4kB 2*8kB 1*16kB 1*32kB 1*64kB 1*128kB 1*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 1028kB
Normal: empty
HighMem: empty
Swap cache: add 0, delete 0, find 0/0, race 0+0
Free swap = 996020kB
Total swap = 996020kB
Free swap: 996020kB
122512 pages of RAM
3472 reserved pages
104949 pages shared
0 pages swap cached
[fglrx:firegl_alloc_page] *ERROR* Failed to get a free page at index 1039
[fglrx:firegl_bind_pcie] *ERROR* Failed to allocate page for ATI GART
[fglrx:firegl_bind_pcie] *ERROR* Free the allocated pages
[fglrx:firegl_unlock] *ERROR* Process 5824 using kernel context 0
mtrr: no more MTRRs available
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef