rendered paste bodyLinux version 2.6.31-ARCH (root@architect) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009
Command line: root=/dev/sda1 ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
BIOS-e820: 00000000cffb0000 - 00000000cffbe000 (ACPI data)
BIOS-e820: 00000000cffbe000 - 00000000cffe0000 (ACPI NVS)
BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcffb0 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000cffb0000 (usable)
modified: 00000000cffb0000 - 00000000cffbe000 (ACPI data)
modified: 00000000cffbe000 - 00000000cffe0000 (ACPI NVS)
modified: 00000000cffe0000 - 00000000d0000000 (reserved)
modified: 00000000fff00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000130000000 (usable)
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cffb0000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cfe00000 page 2M
00cfe00000 - 00cffb0000 page 4k
kernel direct mapping tables up to cffb0000 @ 10000-13000
init_memory_mapping: 0000000100000000-0000000130000000
0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ 12000-14000
RAMDISK: 37f1a000 - 37fef209
ACPI: RSDP 00000000000f9d70 00024 (v02 ACPIAM)
ACPI: XSDT 00000000cffb0100 00054 (v01 060209 OEMXSDT 20090602 MSFT 00000097)
ACPI: FACP 00000000cffb0290 000F4 (v03 060209 OEMFACP 20090602 MSFT 00000097)
ACPI: DSDT 00000000cffb0440 0955F (v01 P0001 P0001000 00000000 INTL 20051117)
ACPI: FACS 00000000cffbe000 00040
ACPI: APIC 00000000cffb0390 0006C (v01 060209 OEMAPIC 20090602 MSFT 00000097)
ACPI: MCFG 00000000cffb0400 0003C (v01 060209 OEMMCFG 20090602 MSFT 00000097)
ACPI: OEMB 00000000cffbe040 00071 (v01 060209 AMI_OEM 20090602 MSFT 00000097)
ACPI: HPET 00000000cffb99a0 00038 (v01 060209 OEMHPET 20090602 MSFT 00000097)
ACPI: SSDT 00000000cffb99e0 00544 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
(8 early reservations) ==> bootmem [0000000000 - 0130000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00016837d0] TEXT DATA BSS ==> [0001000000 - 00016837d0]
#3 [0037f1a000 - 0037fef209] RAMDISK ==> [0037f1a000 - 0037fef209]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0001684000 - 000168419d] BRK ==> [0001684000 - 000168419d]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000]
found SMP MP-table at [ffff8800000ff780] ff780
[ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000cffb0
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048383
DMA zone: 56 pages used for memmap
DMA zone: 102 pages reserved
DMA zone: 3825 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833512 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000cffb0000 - 00000000cffbe000
PM: Registered nosave memory: 00000000cffbe000 - 00000000cffe0000
PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:2ff00000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages at ffff880028022000, static data 82400 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031257
Kernel command line: root=/dev/sda1 ro
PID hash table entries: 4096 (order: 12, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 4053388k/4980736k available (3628k kernel code, 787204k absent, 139268k reserved, 1500k data, 484k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
NR_IRQS:768
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2206.685 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4415.25 BogoMIPS (lpj=7355606)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
Performance Counters: AMD PMU driver.
... version: 0
... bit width: 48
... generic counters: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose counters: 0
... counter mask: 000000000000000f
ACPI: Core revision 20090521
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) 9500 Quad-Core Processor stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4415.34 BogoMIPS (lpj=7355749)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Phenom(tm) 9500 Quad-Core Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4415.35 BogoMIPS (lpj=7355763)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
mce: CPU supports 6 MCE banks
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Phenom(tm) 9500 Quad-Core Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4415.34 BogoMIPS (lpj=7355747)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
mce: CPU supports 6 MCE banks
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Phenom(tm) 9500 Quad-Core Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (17660.29 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-3 level MC
groups: 0 1 2 3
CPU1 attaching sched-domain:
domain 0: span 0-3 level MC
groups: 1 2 3 0
CPU2 attaching sched-domain:
domain 0: span 0-3 level MC
groups: 2 3 0 1
CPU3 attaching sched-domain:
domain 0: span 0-3 level MC
groups: 3 0 1 2
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
TOM2: 0000000130000000 aka 4864M
bus: [00,07] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [d0000000, ffffffff]
bus: 00 index 2 mmio: [a0000, bffff]
bus: 00 index 3 mmio: [130000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Warning: Incorrect checksum in table [OEMB] - BD, should be BC 20090521 tbutils-246
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:12.0: reg 10 io port: [0x8000-0x8007]
pci 0000:00:12.0: reg 14 io port: [0x7000-0x7003]
pci 0000:00:12.0: reg 18 io port: [0x6000-0x6007]
pci 0000:00:12.0: reg 1c io port: [0x5000-0x5003]
pci 0000:00:12.0: reg 20 io port: [0x4000-0x400f]
pci 0000:00:12.0: reg 24 32bit mmio: [0xfbbff800-0xfbbffbff]
pci 0000:00:13.0: reg 10 32bit mmio: [0xfbbfe000-0xfbbfefff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xfbbfd000-0xfbbfdfff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xfbbfc000-0xfbbfcfff]
pci 0000:00:13.3: reg 10 32bit mmio: [0xfbbfb000-0xfbbfbfff]
pci 0000:00:13.4: reg 10 32bit mmio: [0xfbbfa000-0xfbbfafff]
pci 0000:00:13.5: reg 10 32bit mmio: [0xfbbff000-0xfbbff0ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: PME# disabled
pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
pci 0000:00:14.2: reg 10 64bit mmio: [0xfbbf4000-0xfbbf7fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 18 64bit mmio: [0xfbcf0000-0xfbcfffff]
pci 0000:01:00.0: reg 20 io port: [0x9000-0x90ff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfbcc0000-0xfbcdffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10 64bit mmio: [0xfbcec000-0xfbceffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:02.0: bridge 32bit mmio: [0xfbc00000-0xfbcfffff]
pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 10 io port: [0xb800-0xb807]
pci 0000:02:00.0: reg 14 io port: [0xb400-0xb403]
pci 0000:02:00.0: reg 18 io port: [0xb000-0xb007]
pci 0000:02:00.0: reg 1c io port: [0xa800-0xa803]
pci 0000:02:00.0: reg 20 io port: [0xa400-0xa40f]
pci 0000:02:00.0: reg 24 32bit mmio: [0xfbdffc00-0xfbdfffff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: bridge io port: [0xa000-0xbfff]
pci 0000:00:04.0: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xfbefc000-0xfbefffff]
pci 0000:03:00.0: reg 18 io port: [0xc800-0xc8ff]
pci 0000:03:00.0: reg 30 32bit mmio: [0xfbec0000-0xfbedffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:06.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:06.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
pci 0000:04:00.0: reg 10 io port: [0xe800-0xe807]
pci 0000:04:00.0: reg 14 io port: [0xe400-0xe403]
pci 0000:04:00.0: reg 18 io port: [0xe000-0xe007]
pci 0000:04:00.0: reg 1c io port: [0xd800-0xd803]
pci 0000:04:00.0: reg 20 io port: [0xd400-0xd40f]
pci 0000:04:00.0: reg 24 32bit mmio: [0xfbfffc00-0xfbffffff]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: PME# supported from D0 D1 D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:00:07.0: bridge io port: [0xd000-0xefff]
pci 0000:00:07.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
pci 0000:05:06.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:05:06.2: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
pci 0000:05:08.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff]
pci 0000:05:08.0: supports D1 D2
pci 0000:05:08.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:08.0: PME# disabled
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge 32bit mmio: [0xfc000000-0xfebfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
pci 0000:00:00.0: BAR 3: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0b: mem resource (0x100000-0xcfffffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x40b-0x40b has been reserved
system 00:07: ioport range 0x4d6-0x4d6 has been reserved
system 00:07: ioport range 0xc00-0xc01 has been reserved
system 00:07: ioport range 0xc14-0xc14 has been reserved
system 00:07: ioport range 0xc50-0xc51 has been reserved
system 00:07: ioport range 0xc52-0xc52 has been reserved
system 00:07: ioport range 0xc6c-0xc6c has been reserved
system 00:07: ioport range 0xc6f-0xc6f has been reserved
system 00:07: ioport range 0xcd0-0xcd1 has been reserved
system 00:07: ioport range 0xcd2-0xcd3 has been reserved
system 00:07: ioport range 0xcd4-0xcd5 has been reserved
system 00:07: ioport range 0xcd6-0xcd7 has been reserved
system 00:07: ioport range 0xcd8-0xcdf has been reserved
system 00:07: ioport range 0x800-0x89f has been reserved
system 00:07: ioport range 0xb10-0xb1f has been reserved
system 00:07: ioport range 0x900-0x90f has been reserved
system 00:07: ioport range 0x910-0x91f has been reserved
system 00:07: ioport range 0xfe00-0xfefe has been reserved
system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:07: iomem range 0xfff00000-0xffffffff has been reserved
system 00:09: ioport range 0xe00-0xe0f has been reserved
system 00:09: ioport range 0xe80-0xe8f has been reserved
system 00:09: ioport range 0xf40-0xf4f has been reserved
system 00:09: ioport range 0xa30-0xa3f has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: 0x9000-0x9fff
pci 0000:00:02.0: MEM window: 0xfbc00000-0xfbcfffff
pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0: IO window: 0xa000-0xbfff
pci 0000:00:04.0: MEM window: 0xfbd00000-0xfbdfffff
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
pci 0000:00:06.0: IO window: 0xc000-0xcfff
pci 0000:00:06.0: MEM window: 0xfbe00000-0xfbefffff
pci 0000:00:06.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0: IO window: 0xd000-0xefff
pci 0000:00:07.0: MEM window: 0xfbf00000-0xfbffffff
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
pci 0000:00:14.4: IO window: disabled
pci 0000:00:14.4: MEM window: 0xfc000000-0xfebfffff
pci 0000:00:14.4: PREFETCH window: disabled
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
pci_bus 0000:01: resource 1 mem: [0xfbc00000-0xfbcfffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 0 io: [0xa000-0xbfff]
pci_bus 0000:02: resource 1 mem: [0xfbd00000-0xfbdfffff]
pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:03: resource 1 mem: [0xfbe00000-0xfbefffff]
pci_bus 0000:04: resource 0 io: [0xd000-0xefff]
pci_bus 0000:04: resource 1 mem: [0xfbf00000-0xfbffffff]
pci_bus 0000:05: resource 1 mem: [0xfc000000-0xfebfffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 852k freed
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1255773823.453:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7920
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:04.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:04.0: setting latency timer to 64
pcieport-driver 0000:00:06.0: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:06.0: setting latency timer to 64
pcieport-driver 0000:00:07.0: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:07.0: setting latency timer to 64
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 484k freed
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: 64bit ncq sntf ilck led clo pmp pio
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfbbff800 port 0xfbbff900 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfbbff800 port 0xfbbff980 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfbbff800 port 0xfbbffa00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfbbff800 port 0xfbbffa80 irq 22
pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:00:14.1: setting latency timer to 64
pata_acpi 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:02:00.0: setting latency timer to 64
pata_acpi 0000:02:00.0: PCI INT A disabled
pata_acpi 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pata_acpi 0000:04:00.0: setting latency timer to 64
pata_acpi 0000:04:00.0: PCI INT A disabled
pata_marvell 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_marvell 0000:02:00.0: setting latency timer to 64
scsi4 : pata_marvell
scsi5 : pata_marvell
ata5: PATA max UDMA/100 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq 16
ata6: PATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq 16
pata_marvell 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pata_marvell 0000:04:00.0: setting latency timer to 64
scsi6 : pata_marvell
scsi7 : pata_marvell
ata7: PATA max UDMA/100 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 19
ata8: PATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 19
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: softreset failed (device not ready)
ata3: softreset failed (device not ready)
ata3: applying SB600 PMP SRST workaround and retrying
ata1: applying SB600 PMP SRST workaround and retrying
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
scsi8 : pata_atiixp
scsi9 : pata_atiixp
ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: unknown partition table
sd 2:0:0:0: [sdb] Attached SCSI disk
sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata9.00: ATA-6: ST3200822A, 3.01, max UDMA/100
ata9.00: 390721968 sectors, multi 16: LBA48
ata9.01: ATAPI: HL-DT-ST DVDRAM GSA-H42L, SL00, max UDMA/66
ata9.00: configured for UDMA/100
ata9.01: configured for UDMA/66
scsi 8:0:0:0: Direct-Access ATA ST3200822A 3.01 PQ: 0 ANSI: 5
sd 8:0:0:0: [sdc] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3 sdc4 <
scsi 8:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H42L SL00 PQ: 0 ANSI: 5
sdc5 sdc6 sdc7 >
sd 8:0:0:0: [sdc] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 8:0:1:0: Attached scsi CD-ROM sr0
EXT4-fs (sda1): barriers enabled
kjournald2 starting: pid 639, dev sda1:8, commit interval 5 seconds
EXT4-fs (sda1): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda1): mounted filesystem with ordered data mode
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev: starting version 146
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 3798 MBytes.
[fglrx] vendor: 1002 device: 9501 count: 1
[fglrx] ioport: bar 4, base 0x9000, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.65.4 [Aug 13 2009] with 1 minors
sky2 driver version 1.23
sky2 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sky2 0000:03:00.0: setting latency timer to 64
sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:03:00.0: irq 28 for MSI/MSI-X
sky2 eth0: addr 00:1e:8c:ba:a8:1a
EDAC MC: Ver: 2.1.0 Oct 13 2009
EDAC amd64_edac: Ver: 3.2.0 Oct 13 2009
EDAC amd64: This node reports that Memory ECC is currently disabled.
EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
Might be a BIOS bug, if BIOS says ECC is enabled
Use of the override can cause unknown side effects.
amd64_edac: probe of 0000:00:18.2 failed with error -22
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:0: Attached scsi generic sg2 type 0
sr 8:0:1:0: Attached scsi generic sg3 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input1
ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
piix4_smbus: probe of 0000:00:14.0 failed with error -16
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfbbff000
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 4 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0414760
vboxdrv: fAsync=0 offMin=0x379 offMax=0x1662
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.0.8 (interface 0x000e0000).
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfbbfe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfbbfd000
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa05f6f20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfbbfc000
ACPI: WMI: Mapper loaded
QEMU Accelerator Module version 1.4.0, Copyright (c) 2005-2008 Fabrice Bellard
KQEMU installed, max_locked_mem=2027800kB.
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfbbfb000
ACPI: duty_cycle spans bit 4
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
usb 1-9: new high speed USB device using ehci_hcd and address 5
ohci1394 0000:05:08.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfbbfa000
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[22] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
usb 1-9: configuration #1 chosen from 1 choice
kvm: Nested Paging enabled
usb 2-1: new low speed USB device using ohci_hcd and address 2
Linux video capture interface: v2.00
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
cx88[0]: subsystem: 153b:1166, board: TerraTec Cinergy 1400 DVB-T [card=30,autodetected], frontend(s): 1
cx88[0]: TV tuner type 4, Radio tuner type 0
cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
input: cx88 IR (TerraTec Cinergy 1400 as /devices/pci0000:00/0000:00:14.4/0000:05:06.2/input/input4
cx88[0]/2: cx2388x 8802 Driver Manager
cx88-mpeg driver manager 0000:05:06.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
cx88[0]/2: found at 0000:05:06.2, rev: 5, irq: 21, latency: 64, mmio: 0xfc000000
IRQ 21/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
cx8800 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
cx88[0]/0: found at 0000:05:06.0, rev: 5, irq: 21, latency: 64, mmio: 0xfd000000
IRQ 21/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:01:00.1: setting latency timer to 64
usb 2-1: configuration #1 chosen from 1 choice
cx88/2: cx2388x dvb driver version 0.0.7 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 153b:1166, board: TerraTec Cinergy 1400 DVB-T [card=30]
cx88[0]/2: cx2388x based DVB/ATSC card
cx8802_alloc_frontends() allocating 1 frontend(s)
usbcore: registered new interface driver hiddev
input: Razer Razer 1600dpi 3 button optical mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input6
generic-usb 0003:1532:0003.0001: input,hidraw0: USB HID v1.10 Mouse [Razer Razer 1600dpi 3 button optical mouse] on usb-0000:00:13.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 2-2: new low speed USB device using ohci_hcd and address 3
DVB: registering new adapter (cx88[0])
DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)...
cfg80211: Calling CRDA to update world regulatory domain
usb 2-2: configuration #1 chosen from 1 choice
input: Cherry GmbH as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input7
generic-usb 0003:046A:0001.0002: input,hidraw1: USB HID v1.11 Keyboard [Cherry GmbH] on usb-0000:00:13.0-2/input0
usb 5-1: new low speed USB device using ohci_hcd and address 2
phy0: Selected rate control algorithm 'minstrel'
Registered led device: rt2800usb-phy0::radio
Registered led device: rt2800usb-phy0::assoc
Registered led device: rt2800usb-phy0::quality
usbcore: registered new interface driver rt2800usb
usb 5-1: configuration #1 chosen from 1 choice
rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
rtusb init --->
usbcore: registered new interface driver rt2870
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001041b02]
rt3070sta: module is from the staging directory, the quality is unknown, you have been warned.
rtusb init --->
Error: Driver 'rt2870' is already registered, aborting...
usbcore: error -17 registering interface driver rt2870
input: GreenAsia Inc. USB Joystick as /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/input/input8
pantherlord 0003:0E8F:0003.0003: input,hidraw2: USB HID v1.10 Joystick [GreenAsia Inc. USB Joystick ] on usb-0000:00:13.3-1/input0
pantherlord 0003:0E8F:0003.0003: Force feedback for PantherLord/GreenAsia devices by Anssi Hannula <anssi.hannula@gmail.com>
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
EXT4-fs (sda1): internal journal on sda1:8
EXT4-fs (sda5): barriers enabled
kjournald2 starting: pid 3485, dev sda5:8, commit interval 5 seconds
EXT4-fs (sda5): internal journal on sda5:8
EXT4-fs (sda5): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda5): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 4096564k swap on /dev/sdc3. Priority:-1 extents:1 across:4096564k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
fglrx_pci 0000:01:00.0: irq 29 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 3874
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[fglrx] Gart USWC size:1236 M.
[fglrx] Gart cacheable size:491 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc21000, size:3df000
[fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
fuse init (API version 7.12)
eth0: no IPv6 routers present
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Intel AES-NI instructions are not detected.
padlock: VIA PadLock not detected.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
usbcore: deregistering interface driver rt2870
<--- rtusb exit
usbcore: deregistering interface driver rt2800usb
rt3070sta: module is from the staging directory, the quality is unknown, you have been warned.
rtusb init --->
=== pAd = ffffc900128e9000, size = 598584 ===
<-- RTMPAllocAdapterBlock, Status=0
usbcore: registered new interface driver rt2870
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
RTMPSetPhyMode: channel is out of range, use first channel=1
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 363
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
Terminate the MLMEThr_pid=4628!
Terminate the RTUSBCmdThr_pid=4629!
Terminate the TimerQThr_pid=4630!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 363
ra0: no IPv6 routers present
eth0: no IPv6 routers present
Terminate the MLMEThr_pid=4650!
Terminate the RTUSBCmdThr_pid=4651!
Terminate the TimerQThr_pid=4652!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
Terminate the MLMEThr_pid=4695!
Terminate the RTUSBCmdThr_pid=4696!
Terminate the TimerQThr_pid=4697!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 363
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
Terminate the MLMEThr_pid=4783!
Terminate the RTUSBCmdThr_pid=4784!
Terminate the TimerQThr_pid=4785!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
Terminate the MLMEThr_pid=4832!
Terminate the RTUSBCmdThr_pid=4833!
Terminate the TimerQThr_pid=4834!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
Terminate the MLMEThr_pid=4882!
Terminate the RTUSBCmdThr_pid=4883!
Terminate the TimerQThr_pid=4884!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
Terminate the MLMEThr_pid=5003!
Terminate the RTUSBCmdThr_pid=5004!
Terminate the TimerQThr_pid=5005!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
Terminate the MLMEThr_pid=5045!
Terminate the RTUSBCmdThr_pid=5046!
Terminate the TimerQThr_pid=5047!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
Terminate the MLMEThr_pid=5110!
Terminate the RTUSBCmdThr_pid=5111!
Terminate the TimerQThr_pid=5112!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
Terminate the MLMEThr_pid=5359!
Terminate the RTUSBCmdThr_pid=5360!
Terminate the TimerQThr_pid=5361!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
Terminate the MLMEThr_pid=5509!
Terminate the RTUSBCmdThr_pid=5510!
Terminate the TimerQThr_pid=5511!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
Terminate the MLMEThr_pid=5890!
Terminate the RTUSBCmdThr_pid=5891!
Terminate the TimerQThr_pid=5892!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
Terminate the MLMEThr_pid=8054!
Terminate the RTUSBCmdThr_pid=8055!
Terminate the TimerQThr_pid=8056!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
Terminate the MLMEThr_pid=8177!
Terminate the RTUSBCmdThr_pid=8178!
Terminate the TimerQThr_pid=8179!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
usb 1-9: USB disconnect, address 5
#
Bulk In Failed. Status=-108, BIIdx=0x7, BIRIdx=0x7, actual_length= 0x0
rtusb_disconnect: unregister usbnet usb-0000:00:13.5-9
rtusb_disconnect: unregister_netdev(), dev->name=ra0!
#
device disconnected
CMDTHREAD_RESET_BULK_IN: Read Register Failed!Card must be removed!!
#
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! H2M_MAILBOX still hold by MCU. command fail
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
#
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
#
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
#
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
#
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
#
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
#
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
#
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
RTUSB_VendorRequest failed(-19),TxFlags=0x0, ReqType=IN, Req=0x7, Index=0x500
Retry count exhausted or device removed!!!
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R6=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R12=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R13=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R1=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R23=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
Retry count exhausted or device removed!!!
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R7=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! H2M_MAILBOX still hold by MCU. command fail
Terminate the MLMEThr_pid=8319!
Terminate the RTUSBCmdThr_pid=8320!
Terminate the TimerQThr_pid=8321!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
RTUSB disconnect successfully
usb 1-10: new high speed USB device using ehci_hcd and address 6
usb 1-10: configuration #1 chosen from 1 choice
=== pAd = ffffc9001297e000, size = 598584 ===
<-- RTMPAllocAdapterBlock, Status=0
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
RTMPSetPhyMode: channel is out of range, use first channel=1
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
ra0: no IPv6 routers present
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
Terminate the MLMEThr_pid=9985!
Terminate the RTUSBCmdThr_pid=9986!
Terminate the TimerQThr_pid=9987!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=6)
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
Terminate the MLMEThr_pid=10089!
Terminate the RTUSBCmdThr_pid=10090!
Terminate the TimerQThr_pid=10091!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=6)
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
Terminate the MLMEThr_pid=10135!
Terminate the RTUSBCmdThr_pid=10136!
Terminate the TimerQThr_pid=10137!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
ra0: no IPv6 routers present
eth0: no IPv6 routers present
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
Terminate the MLMEThr_pid=10210!
Terminate the RTUSBCmdThr_pid=10211!
Terminate the TimerQThr_pid=10212!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=6)
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
Terminate the MLMEThr_pid=10288!
Terminate the RTUSBCmdThr_pid=10289!
Terminate the TimerQThr_pid=10290!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
Terminate the MLMEThr_pid=10363!
Terminate the RTUSBCmdThr_pid=10364!
Terminate the TimerQThr_pid=10365!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
Terminate the MLMEThr_pid=10385!
Terminate the RTUSBCmdThr_pid=10386!
Terminate the TimerQThr_pid=10387!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ra0: no IPv6 routers present
eth0: no IPv6 routers present
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
usb 1-10: USB disconnect, address 6
Bulk In Failed. Status=-108, BIIdx=0x5, BIRIdx=0x5, actual_length= 0x0
rtusb_disconnect: unregister usbnet usb-0000:00:13.5-10
rtusb_disconnect: unregister_netdev(), dev->name=ra0!
device disconnected
CMDTHREAD_RESET_BULK_IN: Read Register Failed!Card must be removed!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! H2M_MAILBOX still hold by MCU. command fail
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
Retry count exhausted or device removed!!!
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R6=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R12=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R13=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R1=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R23=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
Retry count exhausted or device removed!!!
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R7=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! H2M_MAILBOX still hold by MCU. command fail
Terminate the MLMEThr_pid=10420!
Terminate the RTUSBCmdThr_pid=10421!
Terminate the TimerQThr_pid=10422!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
RTUSB disconnect successfully
usb 1-9: new high speed USB device using ehci_hcd and address 7
usb 1-9: configuration #1 chosen from 1 choice
=== pAd = ffffc90012a13000, size = 598584 ===
<-- RTMPAllocAdapterBlock, Status=0
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
RTMPSetPhyMode: channel is out of range, use first channel=1
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
ra0: no IPv6 routers present
usb 1-9: USB disconnect, address 7
Bulk In Failed. Status=-108, BIIdx=0x3, BIRIdx=0x3, actual_length= 0x0
rtusb_disconnect: unregister usbnet usb-0000:00:13.5-9
rtusb_disconnect: unregister_netdev(), dev->name=ra0!
device disconnected
CMDTHREAD_RESET_BULK_IN: Read Register Failed!Card must be removed!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! H2M_MAILBOX still hold by MCU. command fail
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
Retry count exhausted or device removed!!!
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R6=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R12=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R13=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R1=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R23=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
Retry count exhausted or device removed!!!
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R7=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! H2M_MAILBOX still hold by MCU. command fail
Terminate the MLMEThr_pid=10662!
Terminate the RTUSBCmdThr_pid=10663!
Terminate the TimerQThr_pid=10664!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
RTUSB disconnect successfully
usb 1-9: new high speed USB device using ehci_hcd and address 8
usb 1-9: configuration #1 chosen from 1 choice
=== pAd = ffffc90012aa8000, size = 598584 ===
<-- RTMPAllocAdapterBlock, Status=0
sky2 eth0: Link is down.
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
RTMPSetPhyMode: channel is out of range, use first channel=1
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
sky2 eth0: disabling interface
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
Terminate the MLMEThr_pid=10962!
Terminate the RTUSBCmdThr_pid=10963!
Terminate the TimerQThr_pid=10964!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
--> Error 20 opening /etc/Wireless/RT2870STA/RT2870STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=6)
ra0: no IPv6 routers present
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 369
usb 1-9: USB disconnect, address 8
Bulk In Failed. Status=-108, BIIdx=0x7, BIRIdx=0x7, actual_length= 0x0
rtusb_disconnect: unregister usbnet usb-0000:00:13.5-9
rtusb_disconnect: unregister_netdev(), dev->name=ra0!
device disconnected
CMDTHREAD_RESET_BULK_IN: Read Register Failed!Card must be removed!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! H2M_MAILBOX still hold by MCU. command fail
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
Retry count exhausted or device removed!!!
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R6=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R12=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R13=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R1=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R23=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
Retry count exhausted or device removed!!!
device disconnected
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! RF read R7=0xffffffff fail, i[100], k[0]
device disconnected
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=0!
Retry count exhausted or device removed!!!
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
device disconnected
ERROR!!! H2M_MAILBOX still hold by MCU. command fail
Terminate the MLMEThr_pid=10983!
Terminate the RTUSBCmdThr_pid=10984!
Terminate the TimerQThr_pid=10985!
wait_for_completion TimerQThr
---> RTMPFreeTxRxRingMemory
<--- ReleaseAdapter
RTUSB disconnect successfully
usb 1-9: new high speed USB device using ehci_hcd and address 9
usb 1-9: configuration #1 chosen from 1 choice
=== pAd = ffffc90012b3d000, size = 598584 ===
<-- RTMPAllocAdapterBlock, Status=0