rendered paste bodyX.Org X Server 1.6.5Release Date: 2009-10-11X Protocol Version 11, Revision 0Build Operating System: Linux_2.6.22.18-server-1mdv MandrivaCurrent Operating System: Linux localhost 2.6.31.4-desktop586-0.rc2.1mnb #1 SMP Sun Oct 11 21:58:53 EDT 2009 i686Build Date: 13 October 2009 12:19:57PM Before reporting problems, check http://qa.mandriva.com to make sure that you have the latest version.Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown.(==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 17 14:23:42 2009(II) Loader magic: 0x3bc0(II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0(II) Loader running on linux(--) using VT number 7(--) PCI:*(0:0:2:0) 8086:2772:1043:817a Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0xdfc80000/524288, 0xc0000000/268435456, 0xdfd80000/262144, I/O @ 0x0000b800/8(--) PCI: (0:0:2:1) 8086:2776:1043:817a Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0xdfd00000/524288(==) Using default built-in configuration (39 lines)(==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" EndSection Section "Device" Identifier "Builtin Default i810 Device 0" Driver "i810" EndSection Section "Screen" Identifier "Builtin Default i810 Screen 0" Device "Builtin Default i810 Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" Screen "Builtin Default i810 Screen 0" Screen "Builtin Default vesa Screen 0" Screen "Builtin Default fbdev Screen 0" EndSection(==) --- End of built-in configuration ---(==) ServerLayout "Builtin Default Layout"(**) |-->Screen "Builtin Default intel Screen 0" (0)(**) | |-->Monitor "<default monitor>"(**) | |-->Device "Builtin Default intel Device 0"(==) No monitor specified for screen "Builtin Default intel Screen 0". Using a default monitor configuration.(**) |-->Screen "Builtin Default i810 Screen 0" (1)(**) | |-->Monitor "<default monitor>"(**) | |-->Device "Builtin Default i810 Device 0"(==) No monitor specified for screen "Builtin Default i810 Screen 0". Using a default monitor configuration.(**) |-->Screen "Builtin Default vesa Screen 0" (2)(**) | |-->Monitor "<default monitor>"(**) | |-->Device "Builtin Default vesa Device 0"(==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration.(**) |-->Screen "Builtin Default fbdev Screen 0" (3)(**) | |-->Monitor "<default monitor>"(**) | |-->Device "Builtin Default fbdev Device 0"(==) No monitor specified for screen "Builtin Default fbdev Screen 0". Using a default monitor configuration.(==) Automatically adding devices(==) Automatically enabling devices(==) FontPath set to: catalogue:/etc/X11/fontpath.d(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"(II) Cannot locate a core pointer device.(II) Cannot locate a core keyboard device.(II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput.(II) Open ACPI successful (/var/run/acpid.socket)(II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B](II) LoadModule: "extmod"(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so(II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0(II) Loading extension Multi-Buffering(II) Loading extension MIT-SCREEN-SAVER(II) Loading extension XFree86-VidModeExtension(II) Loading extension XFree86-DGA(II) Loading extension DPMS(II) Loading extension XVideo(II) Loading extension XVideo-MotionCompensation(II) Loading extension X-Resource(II) LoadModule: "dbe"(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so(II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0(II) Loading extension DOUBLE-BUFFER(II) LoadModule: "glx"(II) Loading /usr/lib/xorg/modules/extensions//libglx.so(II) Module glx: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0(==) AIGLX enabled(II) Loading extension GLX(II) LoadModule: "record"(II) Loading /usr/lib/xorg/modules/extensions//librecord.so(II) Module record: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0(II) Loading extension RECORD(II) LoadModule: "dri"(II) Loading /usr/lib/xorg/modules/extensions//libdri.so(II) Module dri: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0(II) Loading extension XFree86-DRI(II) LoadModule: "dri2"(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so(II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0(II) Loading extension DRI2(II) LoadModule: "intel"(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so(II) Module intel: vendor="X.Org Foundation" compiled for 1.6.4, module version = 2.9.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0(II) LoadModule: "i810"(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.sodlopen: /usr/lib/xorg/modules/drivers//i810_drv.so: undefined symbol: rrPrivIndex(EE) Failed to load /usr/lib/xorg/modules/drivers//i810_drv.so(II) UnloadModule: "i810"(EE) Failed to load module "i810" (loader failed, 7)(II) LoadModule: "vesa"(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so(II) Module vesa: vendor="X.Org Foundation" compiled for 1.6.2, module version = 2.2.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0(II) LoadModule: "fbdev"(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so(II) Module fbdev: vendor="X.Org Foundation" compiled for 1.6.2, module version = 0.4.1 ABI class: X.Org Video Driver, version 5.0(II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale(II) VESA: driver for VESA chipsets: vesa(II) FBDEV: driver for framebuffer: fbdev(II) Primary Device is: PCI 00@00:02:0(WW) Falling back to old probe method for vesa(WW) Falling back to old probe method for fbdev(II) Loading sub module "fbdevhw"(II) LoadModule: "fbdevhw"(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so(II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.6.5, module version = 0.0.2 ABI class: X.Org Video Driver, version 5.0(II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]drmOpenDevice: node name is /dev/dri/card0drmOpenDevice: open result is 10, (OK)drmOpenByBusid: Searching for BusID pci:0000:00:02.0drmOpenDevice: node name is /dev/dri/card0drmOpenDevice: open result is 10, (OK)drmOpenByBusid: drmOpenMinor returns 10drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0(II) intel(0): Creating default Display subsection in Screen section "Builtin Default intel Screen 0" for depth/fbbpp 24/32(==) intel(0): Depth 24, (--) framebuffer bpp 32(==) intel(0): RGB weight 888(==) intel(0): Default visual is TrueColor(II) intel(0): Integrated Graphics Chipset: Intel(R) 945G(--) intel(0): Chipset: "945G"(II) intel(0): Output VGA1 has no monitor section(II) intel(0): Output DVI1 has no monitor section(II) intel(0): EDID vendor "SNY", prod id 1408(II) intel(0): Using EDID range info for horizontal sync(II) intel(0): Using EDID range info for vertical refresh(II) intel(0): Printing DDC gathered Modelines:(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)(II) intel(0): Output VGA1 connected(II) intel(0): Output DVI1 connected(II) intel(0): Using exact sizes for initial modes(II) intel(0): Output VGA1 using initial mode 1280x1024(II) intel(0): Output DVI1 using initial mode 1280x1024(==) intel(0): video overlay key set to 0x101fe(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)(**) intel(0): Display dimensions: (360, 290) mm(**) intel(0): DPI set to (90, 89)(II) Loading sub module "fb"(II) LoadModule: "fb"(II) Loading /usr/lib/xorg/modules//libfb.so(II) Module fb: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4(II) UnloadModule: "vesa"(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so(II) UnloadModule: "fbdev"(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so(II) UnloadModule: "fbdevhw"(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so(==) Depth 24 pixmap format is 32 bpp(II) do I need RAC? No, I don't.(II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B](II) intel(0): [DRI2] Setup complete(**) intel(0): Framebuffer compression disabled(**) intel(0): Tiling enabled(**) intel(0): SwapBuffers wait enabled(==) intel(0): VideoRam: 262144 KB(II) intel(0): Attempting memory allocation with tiled buffers.(II) intel(0): Tiled allocation successful.(II) UXA(0): Driver registered support for the following operations:(II) solid(II) copy(II) composite (RENDER acceleration)(==) intel(0): Backing store disabled(==) intel(0): Silken mouse enabled(II) intel(0): Initializing HW Cursor(II) intel(0): No memory allocations(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.(==) intel(0): DPMS enabled(==) intel(0): Intel XvMC decoder disabled(II) intel(0): Set up textured video(II) intel(0): direct rendering: DRI2 Enabled(--) RandR disabled(II) Initializing built-in extension Generic Event Extension(II) Initializing built-in extension SHAPE(II) Initializing built-in extension MIT-SHM(II) Initializing built-in extension XInputExtension(II) Initializing built-in extension XTEST(II) Initializing built-in extension BIG-REQUESTS(II) Initializing built-in extension SYNC(II) Initializing built-in extension XKEYBOARD(II) Initializing built-in extension XC-MISC(II) Initializing built-in extension SECURITY(II) Initializing built-in extension XINERAMA(II) Initializing built-in extension XFIXES(II) Initializing built-in extension XFree86-Bigfont(II) Initializing built-in extension RENDER(II) Initializing built-in extension RANDR(II) Initializing built-in extension COMPOSITE(II) Initializing built-in extension DAMAGE(II) AIGLX: enabled GLX_MESA_copy_sub_buffer(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so(II) GLX: Initialized DRI2 GL provider for screen 0(II) intel(0): Setting screen physical size to 357 x 286(II) config/hal: Adding input device AT Translated Set 2 keyboard(II) LoadModule: "evdev"(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so(II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.3, module version = 2.2.5 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0(**) AT Translated Set 2 keyboard: always reports core events(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"(II) AT Translated Set 2 keyboard: Found keys(II) AT Translated Set 2 keyboard: Configuring as keyboard(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)(**) Option "xkb_rules" "evdev"(**) Option "xkb_model" "pc105"(**) Option "xkb_layout" "fr"(**) Option "xkb_options" "compose:rwin"(II) config/hal: Adding input device Power Button(**) Power Button: always reports core events(**) Power Button: Device: "/dev/input/event3"(II) Power Button: Found keys(II) Power Button: Configuring as keyboard(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)(**) Option "xkb_rules" "evdev"(**) Option "xkb_model" "pc105"(**) Option "xkb_layout" "fr"(**) Option "xkb_options" "compose:rwin"(II) config/hal: Adding input device Power Button(**) Power Button: always reports core events(**) Power Button: Device: "/dev/input/event2"(II) Power Button: Found keys(II) Power Button: Configuring as keyboard(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)(**) Option "xkb_rules" "evdev"(**) Option "xkb_model" "pc105"(**) Option "xkb_layout" "fr"(**) Option "xkb_options" "compose:rwin"(II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse(**) ImPS/2 Generic Wheel Mouse: always reports core events(**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event1"(II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons(II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes(II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)(II) ImPS/2 Generic Wheel Mouse: Configuring as mouse(**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5(**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200(II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)(**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1(**) ImPS/2 Generic Wheel Mouse: (accel) filter chain progression: 2.00(**) ImPS/2 Generic Wheel Mouse: (accel) filter stage 0: 20.00 ms(**) ImPS/2 Generic Wheel Mouse: (accel) set acceleration profile 0(II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.(II) config/hal: Adding input device Logitech Optical USB Mouse(**) Logitech Optical USB Mouse: always reports core events(**) Logitech Optical USB Mouse: Device: "/dev/input/event6"(II) Logitech Optical USB Mouse: Found 3 mouse buttons(II) Logitech Optical USB Mouse: Found x and y relative axes(II) Logitech Optical USB Mouse: Found scroll wheel(s)(II) Logitech Optical USB Mouse: Configuring as mouse(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)(**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1(**) Logitech Optical USB Mouse: (accel) filter chain progression: 2.00(**) Logitech Optical USB Mouse: (accel) filter stage 0: 20.00 ms(**) Logitech Optical USB Mouse: (accel) set acceleration profile 0(II) Logitech Optical USB Mouse: initialized for relative axes.(II) intel(0): EDID vendor "SNY", prod id 1408(II) intel(0): Using hsync ranges from config file(II) intel(0): Using vrefresh ranges from config file(II) intel(0): Printing DDC gathered Modelines:(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)