rendered paste bodyTotal memory used by CFE: 0x8FE489C0 - 0x90000000 (1799744)
Initialized Data: 0x8FE489C0 - 0x8FE54A60 (49312)
BSS Area: 0x8FE54A60 - 0x8FE55E70 (5136)
Local Heap: 0x8FE55E70 - 0x8FF55E70 (1048576)
Stack Area: 0x8FF55E70 - 0x8FF57E70 (8192)
Text (code) segment: 0x8FF57E80 - 0x8FFFFFB8 (688440)
Boot area (physical): 0x0FE07000 - 0x0FE47000
Relocation Factor: I:F0357E80 - D:0DF489C0
Loader:raw Filesys:raw Dev:ide0.0 File: Options:(null)
USB: New device connected to bus 2 hub 1 port 1
USB: Resetting device on bus 2 port 1
CFE version 1.0.40 for SWARM (64bit,MP,BE,MIPS)
Build Date: Tue Jan 13 14:33:32 PST 2004 (mpl@lc-sj1-092.sj.broadcom.com)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena.
Initializing PCI. [normal]
HyperTransport: 400 MHz
PCI bus 0 slot 0/0: SiByte, Inc. BCM1250 PCI Host Bridge (host bridge, rev 0x02)
PCI bus 0 slot 1/0: SiByte, Inc. BCM1250 HyperTransport Host Bridge (host bridge, rev 0x02)
PCI bus 0 slot 5/0: unknown vendor 0x3388 product 0x0021 (PCI bridge, rev 0x15)
PCI bus 0 slot 6/0: unknown vendor 0x12d8 product 0x8148 (PCI bridge)
PCI bus 0 slot 7/0: Opti RM861HA (USB serial bus, interface 0x10, rev 0x10)
PCI bus 1 slot 1/0: API Networks AP1011 HyperTransport-PCI Bridge (PCI bridge)
PCI bus 3 slot 0/0: Matrox MGA G400 AGP (VGA display, rev 0x85)
PCI bus 4 slot 8/0: NEC USB Host Controller (USB serial bus, interface 0x10, rev 0x41)
PCI bus 4 slot 8/1: NEC USB Host Controller (USB serial bus, interface 0x10, rev 0x41)
PCI bus 4 slot 8/2: NEC product 0x00e0 (USB serial bus, interface 0x20, rev 0x02)
PCI bus 4 slot 9/0: VIA Technologies product 0x3044 (Firewire serial bus, interface 0x10, rev 0x46)
PCI bus 4 slot 10/0: CMD Technology product 0x0680 (RAID mass storage, rev 0x02)
Initializing Devices.
SWARM board revision 3
PCIIDE: 0 controllers found
Config switch: 2
CPU: BCM1250 B2
L2 Cache Status: OK
Wafer ID: 0x4C486019 [Lot 4882, Wafer 3]
Manuf Test: Bin A [2CPU_FI_FD_F2 (OK)]
SysCfg: 0000000028DB0800 [PLL_DIV: 16, IOB0_DIV: CPUCLK/4, IOB1_DIV: CPUCLK/3]
Initializing USB.
PCI bus 0 slot 7/0: OHCI USB controller found at 61000000
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
PCI bus 4 slot 8/0: OHCI USB controller found at 64980000
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
PCI bus 4 slot 8/1: OHCI USB controller found at 64981000
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
CPU type 0x1040102: 800MHz
Total memory: 0x10000000 bytes (256MB)
Total memory used by CFE: 0x8FE489C0 - 0x90000000 (1799744)
Initialized Data: 0x8FE489C0 - 0x8FE54A60 (49312)
BSS Area: 0x8FE54A60 - 0x8FE55E70 (5136)
Local Heap: 0x8FE55E70 - 0x8FF55E70 (1048576)
Stack Area: 0x8FF55E70 - 0x8FF57E70 (8192)
Text (code) segment: 0x8FF57E80 - 0x8FFFFFB8 (688440)
Boot area (physical): 0x0FE07000 - 0x0FE47000
Relocation Factor: I:F0357E80 - D:0DF489C0
Loader:raw Filesys:raw Dev:ide0.0 File: Options:(null)
USB: New device connected to bus 2 hub 1 port 1
USB: Resetting device on bus 2 port 1
USB: Locating Class 03 Vendor 0A81 Product 0101: Human-Interface Device
USBHID: Keyboard Configured.
........... 126976 bytes read
Entry at 0x0000000020000000
Starting program at 0x0000000020000000
SiByte Loader, version 2.4.2
Built on Jul 28 2004
Getting configuration file ext2:ide0.0:*:sibyl.conf...
Config file retrieved.
Available configurations:
debian
mvista
swarm
Boot which configuration [swarm]: