rendered paste body[17179569.184000] Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f59a0
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 IntelR ) @ 0x000f7560
[17179569.184000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[17179569.184000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff30c0
[17179569.184000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff6e00
[17179569.184000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sdb1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2856.984 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179573.216000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179573.216000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.240000] Memory: 1028816k/1048512k available (1976k kernel code, 18940k reserved, 606k data, 288k init, 131008k highmem)
[17179573.240000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179573.320000] Calibrating delay using timer specific routine.. 5718.70 BogoMIPS (lpj=11437410)
[17179573.320000] Security Framework v1.0.0 initialized
[17179573.320000] SELinux: Disabled at boot.
[17179573.320000] Mount-cache hash table entries: 512
[17179573.320000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000000
[17179573.320000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000000
[17179573.320000] monitor/mwait feature present.
[17179573.320000] using mwait in idle threads.
[17179573.320000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179573.320000] CPU: L2 cache: 1024K
[17179573.320000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000651d 00000000 00000000
[17179573.320000] mtrr: v2.0 (20020519)
[17179573.320000] CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[17179573.320000] Enabling fast FPU save and restore... done.
[17179573.320000] Enabling unmasked SIMD FPU exception support... done.
[17179573.320000] Checking 'hlt' instruction... OK.
[17179573.336000] checking if image is initramfs... it is
[17179573.872000] Freeing initrd memory: 6623k freed
[17179573.888000] ACPI: Looking for DSDT ... not found!
[17179574.112000] ENABLING IO-APIC IRQs
[17179574.112000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179574.256000] NET: Registered protocol family 16
[17179574.256000] EISA bus registered
[17179574.256000] ACPI: bus type pci registered
[17179574.268000] PCI: PCI BIOS revision 2.10 entry at 0xfba80, last bus=2
[17179574.268000] PCI: Using configuration type 1
[17179574.268000] ACPI: Subsystem revision 20051216
[17179574.276000] ACPI: Interpreter enabled
[17179574.276000] ACPI: Using IOAPIC for interrupt routing
[17179574.276000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179574.276000] PCI: Probing PCI hardware (bus 00)
[17179574.276000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[17179574.280000] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[17179574.280000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[17179574.280000] Boot video device is 0000:01:00.0
[17179574.280000] PCI: Transparent bridge - 0000:00:1e.0
[17179574.280000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179574.284000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179574.288000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[17179574.288000] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
[17179574.288000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179574.288000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179574.288000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179574.292000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[17179574.292000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179574.292000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[17179574.292000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179574.292000] pnp: PnP ACPI init
[17179574.296000] pnp: PnP ACPI: found 13 devices
[17179574.296000] PnPBIOS: Disabled by ACPI PNP
[17179574.296000] PCI: Using ACPI for IRQ routing
[17179574.296000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179574.316000] pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
[17179574.316000] PCI: Bridge: 0000:00:01.0
[17179574.316000] IO window: disabled.
[17179574.316000] MEM window: e0000000-e1ffffff
[17179574.316000] PREFETCH window: d0000000-dfffffff
[17179574.316000] PCI: Bridge: 0000:00:1e.0
[17179574.316000] IO window: a000-afff
[17179574.316000] MEM window: e2000000-e20fffff
[17179574.316000] PREFETCH window: e2100000-e21fffff
[17179574.316000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179574.316000] audit: initializing netlink socket (disabled)
[17179574.316000] audit(1157368206.316:1): initialized
[17179574.316000] highmem bounce pool size: 64 pages
[17179574.316000] VFS: Disk quotas dquot_6.5.1
[17179574.316000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179574.316000] Initializing Cryptographic API
[17179574.316000] io scheduler noop registered
[17179574.316000] io scheduler anticipatory registered
[17179574.316000] io scheduler deadline registered
[17179574.316000] io scheduler cfq registered
[17179574.316000] isapnp: Scanning for PnP cards...
[17179574.668000] isapnp: No Plug & Play device found
[17179574.684000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179574.688000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.688000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.688000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179574.688000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.688000] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.692000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179574.692000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.692000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179574.692000] mice: PS/2 mouse device common for all mice
[17179574.692000] EISA: Probing bus 0 at eisa.0
[17179574.692000] EISA: Detected 0 cards.
[17179574.692000] NET: Registered protocol family 2
[17179574.720000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.728000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179574.728000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[17179574.728000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179574.728000] TCP: Hash tables configured (established 262144 bind 65536)
[17179574.728000] TCP reno registered
[17179574.728000] TCP bic registered
[17179574.728000] NET: Registered protocol family 1
[17179574.728000] NET: Registered protocol family 8
[17179574.728000] NET: Registered protocol family 20
[17179574.728000] Using IPI Shortcut mode
[17179574.728000] ACPI wakeup devices:
[17179574.728000] PCI0 HUB0 UAR1 USB0 USB1 USB2 USB3 USBE MODM
[17179574.728000] ACPI: (supports S0 S1 S4 S5)
[17179574.728000] Freeing unused kernel memory: 288k freed
[17179574.772000] vga16fb: initializing
[17179574.772000] vga16fb: mapped to 0xc00a0000
[17179574.920000] Console: switching to colour frame buffer device 80x25
[17179574.920000] fb0: VGA16 VGA frame buffer device
[17179575.984000] Capability LSM initialized
[17179576.612000] SCSI subsystem initialized
[17179576.612000] ACPI: bus type scsi registered
[17179576.612000] libata version 1.20 loaded.
[17179576.616000] ata_piix 0000:00:1f.2: version 1.05
[17179576.616000] ata_piix 0000:00:1f.2: combined mode detected (p=1, s=0)
[17179576.616000] ata_pci_init_one: pci_dev class+intf: 0x1018a
[17179576.616000] ata_pci_init_one: NO_LEGACY == 0
[17179576.616000] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
[17179576.616000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179576.616000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
[17179576.780000] ata1: dev 0 cfg 00:0040 49:2f00 82:7c6b 83:5b09 84:4673 85:7c69 86:1a21 87:4663 88:207f 93:0000
[17179576.780000] ata1: dev 0 ATA-7, max UDMA/133, 195813072 sectors: LBA
[17179576.780000] ata_acpi_push_id: skipping for PATA mode
[17179576.788000] ata1: dev 1 cfg 00:0040 49:2f00 82:7c6b 83:5b09 84:4673 85:7c69 86:1a21 87:4663 88:207f 93:0000
[17179576.788000] ata1: dev 1 ATA-7, max UDMA/133, 195813072 sectors: LBA
[17179576.788000] ata_acpi_push_id: skipping for PATA mode
[17179576.788000] ata1: dev 0 configured for UDMA/133
[17179576.788000] ata1: dev 1 configured for UDMA/133
[17179576.788000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179576.788000] pata_get_dev_handle: dev_handle: 0xdffe75c0, parent_handle: 0xdf96dc40
[17179576.788000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff73a00, *handle=0xdffe75c0
[17179576.788000] do_drive_get_GTF: drive w/ adr=0: v: 0xdffe72c0
[17179576.792000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179576.792000] pata_get_dev_handle: dev_handle: 0xdffe75c0, parent_handle: 0xdf96dc40
[17179576.792000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff73a00, *handle=0xdffe75c0
[17179576.792000] do_drive_get_GTF: drive w/ adr=1: v: 0xdffe7240
[17179576.796000] scsi0 : ata_piix
[17179576.796000] Vendor: ATA Model: Maxtor 6L100M0 Rev: BACE
[17179576.796000] Type: Direct-Access ANSI SCSI revision: 05
[17179576.796000] Vendor: ATA Model: Maxtor 6L100M0 Rev: BACE
[17179576.796000] Type: Direct-Access ANSI SCSI revision: 05
[17179576.796000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179576.796000] pata_get_dev_handle: dev_handle: 0xdffe75c0, parent_handle: 0xdf96dc40
[17179576.796000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff73a00, *handle=0xdffe75c0
[17179576.796000] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
[17179577.116000] ata2: dev 0 cfg 00:85c0 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:041f 93:0000
[17179577.116000] ata2: dev 0 ATAPI, max UDMA/66
[17179577.116000] ata_acpi_push_id: skipping for PATA mode
[17179577.116000] ata2: dev 0 configured for UDMA/33
[17179577.116000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179577.116000] pata_get_dev_handle: dev_handle: 0xdffe75c0, parent_handle: 0xdf96dc40
[17179577.116000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff73a00, *handle=0xdffe75c0
[17179577.116000] do_drive_get_GTF: drive w/ adr=0: v: 0xdffe7f60
[17179577.116000] scsi1 : ata_piix
[17179577.116000] Vendor: HL-DT-ST Model: DVDRRW GSA-4166B Rev: 1.00
[17179577.116000] Type: CD-ROM ANSI SCSI revision: 05
[17179577.116000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179577.116000] pata_get_dev_handle: dev_handle: 0xdffe75c0, parent_handle: 0xdf96dc40
[17179577.116000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff73a00, *handle=0xdffe75c0
[17179577.124000] Driver 'sd' needs updating - please use bus_type methods
[17179577.128000] SCSI device sda: 195813072 512-byte hdwr sectors (100256 MB)
[17179577.132000] SCSI device sda: drive cache: write back
[17179577.140000] SCSI device sda: 195813072 512-byte hdwr sectors (100256 MB)
[17179577.144000] SCSI device sda: drive cache: write back
[17179577.144000] sda: sda1
[17179577.164000] sd 0:0:0:0: Attached scsi disk sda
[17179577.164000] SCSI device sdb: 195813072 512-byte hdwr sectors (100256 MB)
[17179577.164000] SCSI device sdb: drive cache: write back
[17179577.164000] SCSI device sdb: 195813072 512-byte hdwr sectors (100256 MB)
[17179577.164000] SCSI device sdb: drive cache: write back
[17179577.164000] sdb: sdb1 sdb2 < sdb5 >
[17179577.228000] sd 0:0:1:0: Attached scsi disk sdb
[17179577.464000] usbcore: registered new driver usbfs
[17179577.464000] usbcore: registered new driver hub
[17179577.464000] USB Universal Host Controller Interface driver v2.3
[17179577.464000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179577.464000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179577.464000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179577.464000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179577.464000] uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000bc00
[17179577.468000] hub 1-0:1.0: USB hub found
[17179577.468000] hub 1-0:1.0: 2 ports detected
[17179577.572000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
[17179577.572000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179577.572000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179577.572000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179577.572000] uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000b000
[17179577.572000] hub 2-0:1.0: USB hub found
[17179577.572000] hub 2-0:1.0: 2 ports detected
[17179577.676000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
[17179577.676000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179577.676000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179577.676000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179577.676000] uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000b400
[17179577.676000] hub 3-0:1.0: USB hub found
[17179577.676000] hub 3-0:1.0: 2 ports detected
[17179577.780000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 177
[17179577.780000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179577.780000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179577.780000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179577.780000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000b800
[17179577.780000] hub 4-0:1.0: USB hub found
[17179577.780000] hub 4-0:1.0: 2 ports detected
[17179577.812000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179577.884000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
[17179577.884000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179577.884000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179577.884000] ehci_hcd 0000:00:1d.7: debug port 1
[17179577.884000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[17179577.884000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179577.884000] ehci_hcd 0000:00:1d.7: irq 193, io mem 0xe2200000
[17179577.888000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.888000] hub 5-0:1.0: USB hub found
[17179577.888000] hub 5-0:1.0: 8 ports detected
[17179578.016000] ide0: I/O resource 0x1F0-0x1F7 not free.
[17179578.016000] ide0: ports already in use, skipping probe
[17179578.016000] ide1: I/O resource 0x170-0x177 not free.
[17179578.016000] ide1: ports already in use, skipping probe
[17179578.056000] Attempting manual resume
[17179578.064000] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
[17179578.344000] usb 1-1: device not accepting address 2, error -71
[17179579.136000] usb 1-1: new full speed USB device using uhci_hcd and address 4
[17179579.540000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[17179583.512000] ReiserFS: sdb1: using ordered data mode
[17179583.528000] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179583.528000] ReiserFS: sdb1: checking transaction log (sdb1)
[17179583.596000] ReiserFS: sdb1: Using r5 hash to sort names
[17179589.724000] usbcore: registered new driver hiddev
[17179589.760000] input: SAITEK CYBORG 3D USB as /class/input/input1
[17179589.760000] input: USB HID v1.00 Joystick [SAITEK CYBORG 3D USB] on usb-0000:00:1d.1-1
[17179589.760000] usbcore: registered new driver usbhid
[17179589.760000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179593.344000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179593.344000] sd 0:0:1:0: Attached scsi generic sg1 type 0
[17179593.348000] 1:0:0:0: Attached scsi generic sg2 type 5
[17179593.660000] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[17179593.660000] Uniform CD-ROM driver Revision: 3.20
[17179593.660000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[17179593.672000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179593.680000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179593.704000] Linux agpgart interface v0.101 (c) Dave Jones
[17179593.708000] agpgart: Detected an Intel 865 Chipset.
[17179593.720000] agpgart: AGP aperture is 256M @ 0xc0000000
[17179594.004000] hw_random hardware driver 1.0.0 loaded
[17179594.200000] nvidia: module license 'NVIDIA' taints kernel.
[17179594.204000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179594.204000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon May 15 13:06:38 PDT 2006
[17179594.468000] Floppy drive(s): fd0 is 1.44M
[17179594.468000] input: PC Speaker as /class/input/input2
[17179594.508000] FDC 0 is a post-1991 82077
[17179594.896000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204
[17179594.896000] usbcore: registered new driver usblp
[17179594.896000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179594.924000] Real Time Clock Driver v1.12
[17179594.932000] Linux video capture interface: v1.00
[17179594.964000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
[17179594.964000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[17179594.996000] bttv: driver version 0.9.16 loaded
[17179594.996000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[17179595.028000] parport: PnPBIOS parport detected.
[17179595.028000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179595.056000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179595.280000] intel8x0_measure_ac97_clock: measured 53747 usecs
[17179595.280000] intel8x0: clocking to 48000
[17179595.284000] bttv: Bt8xx card found (0).
[17179595.284000] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 209
[17179595.284000] bttv0: Bt878 (rev 17) at 0000:02:05.0, irq: 209, latency: 32, mmio: 0xe2100000
[17179595.284000] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
[17179595.284000] bttv0: gpio: en=00000000, out=00000000 in=003fffff [init]
[17179595.288000] tveeprom 0-0050: Huh, no eeprom present (err=-121)?
[17179595.288000] bttv0: using tuner=-1
[17179595.288000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[17179595.288000] bttv0: i2c: checking for TDA9875 @ 0xb0... <6>8139cp: pci dev 0000:02:02.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[17179595.292000] 8139cp: Try the "8139too" driver instead.
[17179595.292000] not found
[17179595.292000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[17179595.296000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[17179595.296000] bttv0: registered device video0
[17179595.296000] bttv0: registered device vbi0
[17179595.320000] 8139too Fast Ethernet driver 0.9.27
[17179595.324000] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 169
[17179595.324000] eth0: RealTek RTL8139 at 0xf8a6a000, 00:50:8d:7b:1a:ca, IRQ 169
[17179595.324000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[17179595.348000] bt878: AUDIO driver version 0.0.0 loaded
[17179595.348000] bt878: Bt878 AUDIO function found (0).
[17179595.348000] ACPI: PCI Interrupt 0000:02:05.1[A] -> GSI 21 (level, low) -> IRQ 209
[17179595.348000] bt878(0): Bt878 (rev 17) at 02:05.1, irq: 209, latency: 32, memory: 0xe2101000
[17179595.576000] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[17179595.592000] ts: Compaq touchscreen protocol output
[17179596.180000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179596.472000] lp0: using parport0 (interrupt-driven).
[17179596.508000] w83627hf 9191-0290: Enabling temp2, readings might not make sense
[17179596.508000] w83627hf 9191-0290: Enabling temp3, readings might not make sense
[17179596.692000] Adding 3028212k swap on /dev/sdb5. Priority:-1 extents:1 across:3028212k
[17179597.216000] NET: Registered protocol family 17
[17179599.264000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179599.264000] md: bitmap version 4.39
[17179600.168000] NET: Registered protocol family 10
[17179600.168000] lo: Disabled Privacy Extensions
[17179600.168000] IPv6 over IPv4 tunneling driver
[17179600.752000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179601.732000] cdrom: open failed.
[17179605.152000] pcc_acpi: loading...
[17179605.164000] ACPI: Power Button (FF) [PWRF]
[17179605.164000] ACPI: Power Button (CM) [PWRB]
[17179605.204000] ibm_acpi: ec object not found
[17179607.300000] ppdev: user-space parallel port driver
[17179607.676000] apm: BIOS not found.
[17179610.352000] eth0: no IPv6 routers present
[17179612.852000] Bluetooth: Core ver 2.8
[17179612.852000] NET: Registered protocol family 31
[17179612.852000] Bluetooth: HCI device and connection manager initialized
[17179612.852000] Bluetooth: HCI socket layer initialized
[17179612.880000] Bluetooth: L2CAP ver 2.8
[17179612.880000] Bluetooth: L2CAP socket layer initialized
[17179612.884000] Bluetooth: RFCOMM socket layer initialized
[17179612.884000] Bluetooth: RFCOMM TTY layer initialized
[17179612.884000] Bluetooth: RFCOMM ver 1.7
[17179615.156000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17179615.156000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179615.156000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179615.308000] i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips
[17179615.308000] i2c_adapter i2c-3: SMBus Quick command not supported, can't probe for chips
[17179615.308000] i2c_adapter i2c-4: SMBus Quick command not supported, can't probe for chips
[17203159.160000] cx2388x v4l2 driver version 0.0.5 loaded
[17203763.108000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17203763.108000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17203763.108000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode