#
# /etc/apache2/httpd.conf
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.2/> for detailed information about
# the directives.
# Based upon the default apache configuration file that ships with apache,
# which is based upon the NCSA server configuration files originally by Rob
# McCool. This file was knocked together by Peter Poeml <poeml+apache@suse.de>.
# If possible, avoid changes to this file. It does mainly contain Include
# statements and global settings that can/should be overridden in the
# configuration of your virtual hosts.
# Overview of include files, chronologically:
#
# httpd.conf
# |
# |-- uid.conf . . . . . . . . . . . . . . UserID/GroupID to run under
# |-- server-tuning.conf . . . . . . . . . sizing of the server (how many processes to start, ...)
# |-- sysconfig.d/loadmodule.conf . . . . . [*] load these modules
# |-- listen.conf . . . . . . . . . . . . . IP adresses / ports to listen on
# |-- mod_log_config.conf . . . . . . . . . define logging formats
# |-- sysconfig.d/global.conf . . . . . . . [*] server-wide general settings
# |-- mod_status.conf . . . . . . . . . . . restrict access to mod_status (server monitoring)
# |-- mod_info.conf . . . . . . . . . . . . restrict access to mod_info
# |-- mod_usertrack.conf . . . . . . . . . defaults for cookie-based user tracking
# |-- mod_autoindex-defaults.conf . . . . . defaults for displaying of server-generated directory listings
# |-- mod_mime-defaults.conf . . . . . . . defaults for mod_mime configuration
# |-- errors.conf . . . . . . . . . . . . . customize error responses
# |-- ssl-global.conf . . . . . . . . . . . SSL conf that applies to default server _and all_ virtual hosts
# |
# |-- default-server.conf . . . . . . . . . set up the default server that replies to non-virtual-host requests
# | |--mod_userdir.conf . . . . . . . . enable UserDir (if mod_userdir is loaded)
# | `--conf.d/apache2-manual?conf . . . add the docs ('?' = if installed)
# |
# |-- sysconfig.d/include.conf . . . . . . [*] your include files
# | (for each file to be included here, put its name
# | into APACHE_INCLUDE_* in /etc/sysconfig/apache2)
# |
# `-- vhosts.d/ . . . . . . . . . . . . . . for each virtual host, place one file here
# `-- *.conf . . . . . . . . . . . . . (*.conf is automatically included)
#
#
# Files marked [*] are created from sysconfig upon server restart: instead of
# these files, you edit /etc/sysconfig/apache2
# Filesystem layout:
#
# /etc/apache2/
# |-- charset.conv . . . . . . . . . . . . for mod_auth_ldap
# |-- conf.d/
# | |-- apache2-manual.conf . . . . . . . conf that comes with apache2-doc
# | |-- mod_php4.conf . . . . . . . . . . (example) conf that comes with apache2-mod_php4
# | `-- ... . . . . . . . . . . . . . . . other configuration added by packages
# |-- default-server.conf
# |-- errors.conf
# |-- httpd.conf . . . . . . . . . . . . . top level configuration file
# |-- listen.conf
# |-- magic
# |-- mime.types -> ../mime.types
# |-- mod_autoindex-defaults.conf
# |-- mod_info.conf
# |-- mod_log_config.conf
# |-- mod_mime-defaults.conf
# |-- mod_perl-startup.pl
# |-- mod_status.conf
# |-- mod_userdir.conf
# |-- mod_usertrack.conf
# |-- server-tuning.conf
# |-- ssl-global.conf
# |-- ssl.crl/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificate Revocation Lists (CRL)
# |-- ssl.crt/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificates
# |-- ssl.csr/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificate Signing Requests
# |-- ssl.key/ . . . . . . . . . . . . . . PEM-encoded RSA Private Keys
# |-- ssl.prm/ . . . . . . . . . . . . . . public DSA Parameter Files
# |-- sysconfig.d/ . . . . . . . . . . . . files that are created from /etc/sysconfig/apache2
# | |-- global.conf
# | |-- include.conf
# | `-- loadmodule.conf
# |-- uid.conf
# `-- vhosts.d/ . . . . . . . . . . . . . . put your virtual host configuration (*.conf) here
# |-- vhost-ssl.template
# `-- vhost.template
### Global Environment ######################################################
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests.
# run under this user/group id
User wwwrun
Group www
# - how many server processes to start (server pool regulation)
# - usage of KeepAlive
##
## Server-Pool Size Regulation (MPM specific)
##
# the MPM (multiprocessing module) is not a dynamically loadable module in the
# sense of other modules. It is a compile time decision which one is used. We
# provide different apache2 MPM packages, containing different httpd2 binaries
# compiled with the available MPMs. See APACHE_MPM in /etc/sysconfig/apache2.
# prefork MPM
<IfModule prefork.c>
# number of server processes to start
# http://httpd.apache.org/docs/2.2/mod/mpm_common.html#startservers
StartServers 5
# minimum number of server processes which are kept spare
# http://httpd.apache.org/docs/2.2/mod/prefork.html#minspareservers
MinSpareServers 5
# maximum number of server processes which are kept spare
# http://httpd.apache.org/docs/2.2/mod/prefork.html#maxspareservers
MaxSpareServers 10
# highest possible MaxClients setting for the lifetime of the Apache process.
# http://httpd.apache.org/docs/2.2/mod/mpm_common.html#serverlimit
ServerLimit 150
# maximum number of server processes allowed to start
# http://httpd.apache.org/docs/2.2/mod/mpm_common.html#maxclients
MaxClients 150
# maximum number of requests a server process serves
# http://httpd.apache.org/docs/2.2/mod/mpm_common.html#maxrequestsperchild
MaxRequestsPerChild 10000
</IfModule>
# worker MPM
<IfModule worker.c>
# initial number of server processes to start
# http://httpd.apache.org/docs/2.2/mod/mpm_common.html#startservers
StartServers 3
# minimum number of worker threads which are kept spare
# http://httpd.apache.org/docs/2.2/mod/mpm_common.html#minsparethreads
MinSpareThreads 25
# maximum number of worker threads which are kept spare
# http://httpd.apache.org/docs/2.2/mod/mpm_common.html#maxsparethreads
MaxSpareThreads 75
# upper limit on the configurable number of threads per child process
# http://httpd.apache.org/docs/2.2/mod/mpm_common.html#threadlimit
ThreadLimit 64
# maximum number of simultaneous client connections
# http://httpd.apache.org/docs/2.2/mod/mpm_common.html#maxclients
MaxClients 150
# number of worker threads created by each child process
# http://httpd.apache.org/docs/2.2/mod/mpm_common.html#threadsperchild
ThreadsPerChild 25
# maximum number of requests a server process serves
# http://httpd.apache.org/docs/2.2/mod/mpm_common.html#maxrequestsperchild
MaxRequestsPerChild 10000
</IfModule>
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15
#
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.2/mod/core.html#enablemmap
#
#EnableMMAP off
#
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.2/mod/core.html#enablesendfile
#
#EnableSendfile off
#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/apache2/error_log
# generated from APACHE_MODULES in /etc/sysconfig/apache2
#
# Files in this directory are created at apache start time by /usr/sbin/rcapache2
# Do not edit them!
#
# as listed in APACHE_MODULES (/etc/sysconfig/apache2)
LoadModule actions_module /usr/lib/apache2-prefork/mod_actions.so
LoadModule alias_module /usr/lib/apache2-prefork/mod_alias.so
LoadModule auth_basic_module /usr/lib/apache2-prefork/mod_auth_basic.so
LoadModule authn_file_module /usr/lib/apache2-prefork/mod_authn_file.so
LoadModule authz_host_module /usr/lib/apache2-prefork/mod_authz_host.so
LoadModule authz_groupfile_module /usr/lib/apache2-prefork/mod_authz_groupfile.so
LoadModule authz_default_module /usr/lib/apache2-prefork/mod_authz_default.so
LoadModule authz_user_module /usr/lib/apache2-prefork/mod_authz_user.so
LoadModule authn_dbm_module /usr/lib/apache2-prefork/mod_authn_dbm.so
LoadModule autoindex_module /usr/lib/apache2-prefork/mod_autoindex.so
LoadModule cgi_module /usr/lib/apache2-prefork/mod_cgi.so
LoadModule dir_module /usr/lib/apache2-prefork/mod_dir.so
LoadModule env_module /usr/lib/apache2-prefork/mod_env.so
LoadModule expires_module /usr/lib/apache2-prefork/mod_expires.so
LoadModule include_module /usr/lib/apache2-prefork/mod_include.so
LoadModule log_config_module /usr/lib/apache2-prefork/mod_log_config.so
LoadModule mime_module /usr/lib/apache2-prefork/mod_mime.so
LoadModule negotiation_module /usr/lib/apache2-prefork/mod_negotiation.so
LoadModule setenvif_module /usr/lib/apache2-prefork/mod_setenvif.so
LoadModule ssl_module /usr/lib/apache2-prefork/mod_ssl.so
LoadModule suexec_module /usr/lib/apache2-prefork/mod_suexec.so
LoadModule userdir_module /usr/lib/apache2-prefork/mod_userdir.so
LoadModule php5_module /usr/lib/apache2/mod_php5.so
#
# IP addresses / ports to listen on
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports. See also the <VirtualHost> directive.
#
# http://httpd.apache.org/docs-2.2/mod/mpm_common.html#listen
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
#Listen 12.34.56.78:80
#Listen 80
#Listen 443
Listen 80
<IfDefine SSL>
<IfDefine !NOSSL>
<IfModule mod_ssl.c>
Listen 443
</IfModule>
</IfDefine>
</IfDefine>
# Use name-based virtual hosting
#
# - on a specified address / port:
#
#NameVirtualHost 12.34.56.78:80
#
# - name-based virtual hosting:
#
#NameVirtualHost *:80
#
# - on all addresses and ports. This is your best bet when you are on
# dynamically assigned IP addresses:
#
#NameVirtualHost *
# predefined logging formats
#
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# http://httpd.apache.org/docs-2.2/mod/mod_log_config.html
#
#
# Format string: Nickname:
#
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%v %h %l %u %t \"%r\" %>s %b" vhost_common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
LogFormat "%h %l %u %t \"%r\" %>s %b \
\"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%v %h %l %u %t \"%r\" %>s %b \
\"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
# To use %I and %O, you need to enable mod_logio
<IfModule mod_logio.c>
LogFormat "%h %l %u %t \"%r\" %>s %b \
\"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# Use one of these when you want a compact non-error SSL logfile on a virtual
# host basis:
<IfModule mod_ssl.c>
Logformat "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \
\"%r\" %b" ssl_common
Logformat "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \
\"%r\" %b \"%{Referer}i\" \"%{User-Agent}i\"" ssl_combined
</IfModule>
# generated from global settings in /etc/sysconfig/apache2
#
# Files in this directory are created at apache start time by /usr/sbin/rcapache2
# Do not edit them!
#
# see /etc/sysconfig/apache2
Timeout 300
ServerSignature on
UseCanonicalName off
ServerTokens OS
LogLevel warn
CustomLog /var/log/apache2/access_log combined
Include /etc/apache2/sysconfig.d/global.conf
# optional mod_status, mod_info
#
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
#
# see http://httpd.apache.org/docs-2.2/mod/mod_status.html
#
<IfModule mod_status.c>
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost
</Location>
</IfModule>
#
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
#
# see http://httpd.apache.org/docs-2.2/mod/mod_info.html
#
<IfModule mod_info.c>
<Location /server-info>
SetHandler server-info
Order deny,allow
Deny from all
Allow from localhost
</Location>
</IfModule>
# optional cookie-based user tracking
# read the documentation before using it!!
<IfModule mod_usertrack.c>
# This is the default.
CookieName Apache
</IfModule>
# configuration of server-generated directory listings
#
# Directives controlling the display of server-generated directory listings.
#
# see http://httpd.apache.org/docs-2.2/mod/mod_autoindex.html
#
<IfModule mod_autoindex.c>
IndexOptions FancyIndexing VersionSort NameWidth=*
# Add Last-Modified and ETag values for the listed directory in the HTTP header,
# based on files' modification dates
#IndexOptions +TrackModified
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
DefaultIcon /icons/unknown.gif
ReadmeName README.html
HeaderName HEADER.html
IndexIgnore .??* *~ *# HEADER* RCS CVS *,v *,t
</IfModule>
# associate MIME types with filename extensions
TypesConfig /etc/apache2/mime.types
DefaultType text/plain
#
# mod_mime configuration:
# associate various bits of "meta information" with files by their filename extensions
#
# see http://httpd.apache.org/docs-2.2/mod/mod_mime.html
#
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
#
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
#
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
<IfModule mod_negotiation.c>
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
ForceLanguagePriority Prefer Fallback
</IfModule>
#
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
#
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5 .Big5 .big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8 .utf8
# The set below does not map to a specific (iso) standard
# but works on a fairly wide range of browsers. Note that
# capitalization actually matters (it should not, but it
# does for some browsers).
#
# See http://www.iana.org/assignments/character-sets
# for a list of sorts. But browsers support few.
#
AddCharset GB2312 .gb2312 .gb
AddCharset utf-7 .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis
#
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#
#AddType application/x-tar .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# Shortcut icons don't seem to be registered by IANA yet, but they
# are so commonly used that we add them here.
Addtype image/x-icon .ico
#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
#
AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Guess the MIME type of a file by looking at a few bytes of its contents
# http://httpd.apache.org/docs-2.2/mod/mod_mime_magic.html
<IfModule mod_mime_magic.c>
MIMEMagicFile /etc/apache2/magic
</IfModule>
# set up (customizable) error responses
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
# Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/share/apache2/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
#
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation. To activate them, uncomment the following 30 lines.
Alias /error/ "/usr/share/apache2/error/"
<IfModule mod_negotiation.c>
<IfModule mod_include.c>
<Directory "/usr/share/apache2/error">
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
ForceLanguagePriority Prefer Fallback
</Directory>
ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
ErrorDocument 410 /error/HTTP_GONE.html.var
ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
</IfModule>
</IfModule>
# global (server-wide) SSL configuration, that is not specific to
# any virtual host
##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##
# These are the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs-2.2/mod/mod_ssl.html>
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# This global SSL configuration is ignored if
# "SSL" is not defined, or if "NOSSL" is defined.
<IfDefine SSL>
<IfDefine !NOSSL>
<IfModule mod_ssl.c>
#
# Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
# shm means the same as shmht.
# Note that on most platforms shared memory segments are not allowed to be on
# network-mounted drives, so in that case you need to use the dbm method.
#SSLSessionCache none
#SSLSessionCache dbm:/var/lib/apache2/ssl_scache
#SSLSessionCache shmht:/var/lib/apache2/ssl_scache(512000)
SSLSessionCache shmcb:/var/lib/apache2/ssl_scache(512000)
SSLSessionCacheTimeout 600
# This configures the SSL engine's semaphore (aka. lock) which is
# used for mutual exclusion of operations which have to be done in a
# synchronized way between the pre-forked Apache server processes.
# "default" tells the SSL Module to pick the default locking
# implementation as determined by the platform and APR.
SSLMutex default
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the
# SSL library. The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/urandom 512
</IfModule>
</IfDefine>
</IfDefine>
# forbid access to the entire filesystem by default
<Directory />
Options None
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# use .htaccess files for overriding,
AccessFileName .htaccess
# and never show them
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# List of resources to look for when the client requests a directory
DirectoryIndex index.html index.html.var
### 'Main' server configuration #############################################
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# Global configuration that will be applicable for all virtual hosts, unless
# deleted here, or overriden elswhere.
#
DocumentRoot "/srv/www/htdocs"
#
# Configure the DocumentRoot
#
<Directory "/srv/www/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.2/mod/core.html#options
# for more information.
Options FollowSymLinks +ExecCGI
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# Aliases: aliases can be added as needed (with no limit). The format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "/usr/share/apache2/icons/"
<Directory "/usr/share/apache2/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "/srv/www/cgi-bin/"
# "/srv/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/srv/www/cgi-bin">
AllowOverride None
Options +ExecCGI -Includes +FollowSymLinks
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
#
# To disable it, simply remove userdir from the list of modules in APACHE_MODULES
# in /etc/sysconfig/apache2.
#
<IfModule mod_userdir.c>
# Note that the name of the user directory ("public_html") cannot simply be
# changed here, since it is a compile time setting. The apache package
# would have to be rebuilt. You could work around by deleting
# /usr/sbin/suexec, but then all scripts from the directories would be
# executed with the UID of the webserver.
UserDir public_html
# The actual configuration of the directory is in
# /etc/apache2/mod_userdir.conf.
#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
#
<IfModule mod_userdir.c>
# Note that the name of the user directory ("public_html") cannot easily be
# changed here, since it is a compile time setting. The apache package
# would have to be rebuilt. You could work around by deleting
# /usr/sbin/suexec, but then all scripts from the directories would be
# executed with the UID of the webserver.
#
# To rebuild apache with another setting you need to change the
# %userdir define in the spec file.
# not every user's directory should be visible:
UserDir disabled root
# to enable UserDir only for a certain set of users, use this instead:
#UserDir disabled
#UserDir enabled user1 user2
# the UserDir directive is actually used inside the virtual hosts, to
# have more control
#UserDir public_html
<Directory /home/*/public_html>
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
<Limit GET POST OPTIONS PROPFIND>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS PROPFIND>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
</IfModule>
# You can, however, change the ~ if you find it awkward, by mapping e.g.
# http://www.example.com/users/karl-heinz/ --> /home/karl-heinz/public_html/
#AliasMatch ^/users/([a-zA-Z0-9-_.]*)/?(.*) /home/$1/public_html/$2
</IfModule>
# Include all *.conf files from /etc/apache2/conf.d/.
#
# This is mostly meant as a place for other RPM packages to drop in their
# configuration snippet.
#
# You can comment this out here if you want those bits include only in a
# certain virtual host, but not here.
#
<Directory "/srv/www/perl-lib">
AllowOverride None
Options None
Order allow,deny
Deny from all
</Directory>
<IfModule mod_perl.c>
PerlRequire "/etc/apache2/mod_perl-startup.pl"
ScriptAlias /perl/ "/srv/www/cgi-bin/"
<Location /perl/>
# mod_perl mode
SetHandler perl-script
PerlResponseHandler ModPerl::Registry
PerlOptions +ParseHeaders
Options +ExecCGI
</Location>
ScriptAlias /cgi-perl/ "/srv/www/cgi-bin/"
<Location /cgi-perl>
# perl cgi mode
SetHandler perl-script
PerlResponseHandler ModPerl::PerlRun
PerlOptions +ParseHeaders
Options +ExecCGI
</Location>
# The /cgi-bin/ ScriptAlias is already set up in httpd.conf
</IfModule>
# vim: ft=apache
<IfModule mod_php5.c>
AddType application/x-httpd-php .php3
AddType application/x-httpd-php .php4
AddType application/x-httpd-php .php5
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .php3s
AddType application/x-httpd-php-source .php4s
AddType application/x-httpd-php-source .php5s
AddType application/x-httpd-php-source .phps
DirectoryIndex index.php3
DirectoryIndex index.php4
DirectoryIndex index.php5
DirectoryIndex index.php
</IfModule>
# Another way to include your own files
#
# The file below is generated from /etc/sysconfig/apache2,
# include arbitrary files as named in APACHE_CONF_INCLUDE_FILES and
# APACHE_CONF_INCLUDE_DIRS
#
# This file is created at apache start time by /usr/sbin/rcapache2. Do not edit it!
#
# as listed in APACHE_INCLUDE_* (/etc/sysconfig/apache2)
:
<Directory /srv/www/htdocs/asm>
Options +ExecCGI
AddHandler cgi-script .cgi
Order allow,deny
Allow from all
</Directory>
#
### Virtual server configuration ############################################
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
# Note: instead of adding your own configuration here, consider
# adding it in your own file (/etc/apache2/httpd.conf.local)
# putting its name into APACHE_CONF_INCLUDE_FILES in
# /etc/sysconfig/apache2 -- this will make system updates
# easier :)